From: "sean darcy" <seandarcy@hotmail.com>
To: linux-kernel@vger.kernel.org
Subject: 2.5.54 ide-scsi and cdrecord
Date: Sat, 04 Jan 2003 14:11:32 -0500 [thread overview]
Message-ID: <F27Iu6VXNjimExOpK7u00012a9a@hotmail.com> (raw)
ide-scsi refuses to boot with A NULL pointer oops (is there a patch yet?).
But I figured it didn't matter because I could use cdrecord without the scsi
layer. So I rebuilt 2.5.54 w/o scsi. Here's the dmesg:
.............
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 6Y120P0, ATA DISK drive
hdb: MAXTOR 6L060J3, ATA DISK drive
hda: DMA disabled
hdb: DMA disabled
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: SONY CD-RW CRX195E1, ATAPI CD/DVD-ROM drive
hdc: DMA disabled
ide1 at 0x170-0x177,0x376 on irq 15
spurious 8259A interrupt: IRQ7.
hda: host protected area => 1
hda: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=238216/16/63,
UDMA(133)
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
hdb: host protected area => 1
hdb: 117266688 sectors (60041 MB) w/1820KiB Cache, CHS=116336/16/63,
UDMA(133)
hdb: hdb1 hdb2 hdb3 < hdb5 hdb6 hdb7 hdb8 >
...........
I got cdrecord 2.0:
[root@amd1900 root]# cdrecord -scanbus -dev=ATAPI
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J?rg Schilling
scsidev: 'ATAPI'
devname: 'ATAPI'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
cdrecord: No such device or address. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are
root.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
FWIW, I also tried just cdrecord -scanbus
What am I missing? I thought we didn't need the scsi layer anymore.
Here are snips from .config:
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_ADMA=y
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_IDE_MODES=y
#
# SCSI device support
#
# CONFIG_SCSI is not set
_________________________________________________________________
Protect your PC - get McAfee.com VirusScan Online
http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
next reply other threads:[~2003-01-04 19:03 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-01-04 19:11 sean darcy [this message]
2003-01-05 15:37 ` Jens Axboe
[not found] <fa.j2ta49v.3k0haa@ifi.uio.no>
2003-01-05 8:35 ` Andrew S. Johnson
2003-01-05 20:56 sean darcy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=F27Iu6VXNjimExOpK7u00012a9a@hotmail.com \
--to=seandarcy@hotmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®