* Custom Kernel & NICS
@ 2001-07-18 16:54 Carl Husa
0 siblings, 0 replies; only message in thread
From: Carl Husa @ 2001-07-18 16:54 UTC (permalink / raw)
To: linux-kernel
Have installed RedHat Linux 7.1, kernel 2.4.2 with two NICs - 3COM905cx and
NetGear FA311. Box will be used as a firewall to separate two rfc 1918 -
networks 10.0.0.0 and 192.168.1.0.
At completion of initial install. both NIC's are recognized, activated and
load (lsmod shows natsemi and 3c59x). Can connect to Internet from exteernal
address, can ping both interfaces.
Then I Customize kernel, with support for iptables, NAT/MASQ, netfilter.
Compile is successful, boot is successful, BUT - neither NIC activates.
Otherwise, boot is fine, the cat test for iptables produces a '1'.
What am I doing wrong?
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2001-07-18 16:54 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-07-18 16:54 Custom Kernel & NICS Carl Husa
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®