* ACPI Problems on a HP ZE4145
@ 2003-03-22 21:01 Sean Gillespie
0 siblings, 0 replies; only message in thread
From: Sean Gillespie @ 2003-03-22 21:01 UTC (permalink / raw)
To: linux-kernel
I am unable to get ACPI working on my ZE4145 Laptop (BIOS Rev KA.M1.20). I
have tried 2.4.18 w/ ACPI patch, 2.4.21 w/ ACPI patch, 2.5.53, 2.5.64, and
2.5.65 and have tried pci=acpi and pci=nobios and get the same error with
each one. I enabled Debug mode for ACPI and this basically what happens.
ACPI: Subsystem revision <varies with kernel>, ACPI Tables successfully
acquired, Parsing all Control Methods, Table [DSDT] - 724 Objects 51 Devices
222 Methods 17 Regions, Parsing all Control Methods, Table [SSDT] 0 Objects,
0 Devices, 0 Methods, 0 Regions, ACPI Namespace successfully loaded at root
c03c89bc, evxfevnt-0073 [04] acpi_enable : Transition to ACPI mode
successful, evgpe-0262: GPE Block0 defined as GPE0 to GPE63. The system
then halts <no oops, no panic> on this line <shown as it appears>
Executing all Device _STA and_INI methods:....
Any help would be greatly appreciated please CC any replies to me.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-03-22 20:51 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-03-22 21:01 ACPI Problems on a HP ZE4145 Sean Gillespie
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®