mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: David Rau <david.rau.zg@renesas.com>
To: Guenter Roeck <linux@roeck-us.net>, David Rau <we730128@gmail.com>
Cc: "perex@perex.cz" <perex@perex.cz>,
	"lgirdwood@gmail.com" <lgirdwood@gmail.com>,
	"broonie@kernel.org" <broonie@kernel.org>,
	"tiwai@suse.com" <tiwai@suse.com>,
	"support.opensource@diasemi.com" <support.opensource@diasemi.com>,
	"alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: RE: [PATCH] ASoC: da7219: Fix pole orientation detection on OMTP headsets when playing music
Date: Thu, 19 Jan 2023 11:02:25 +0000	[thread overview]
Message-ID: <OS3PR01MB66416CEF9F6E5AE62D194BACCDC49@OS3PR01MB6641.jpnprd01.prod.outlook.com> (raw)
In-Reply-To: <20230117195645.GA83401@roeck-us.net>

Would you please provide me the related error messages when hung task crashes in da7219_aad_irq_thread()?
BTW, "gnd_switch_delay = 256" is an unusual use case of the longer jack detection latency. 

-----Original Message-----
From: Guenter Roeck <groeck7@gmail.com> On Behalf Of Guenter Roeck
Sent: Wednesday, January 18, 2023 03:57
To: David Rau <we730128@gmail.com>
Cc: perex@perex.cz; lgirdwood@gmail.com; broonie@kernel.org; tiwai@suse.com; support.opensource@diasemi.com; alsa-devel@alsa-project.org; linux-kernel@vger.kernel.org; David Rau <david.rau.zg@renesas.com>
Subject: Re: [PATCH] ASoC: da7219: Fix pole orientation detection on OMTP headsets when playing music

On Mon, Nov 21, 2022 at 05:07:44AM +0000, David Rau wrote:
> The OMTP pin define headsets can be mis-detected as line out instead 
> of OMTP, causing obvious issues with audio quality.
> This patch is to put increased resistances within the device at a 
> suitable point.
> 
> To solve this issue better, the new mechanism setup ground switches 
> with conditional delay control and these allow for more stabile 
> detection process to operate as intended. This conditional delay 
> control will not impact the hardware process but use extra system 
> resource.
> 
> This commit improves control of ground switches in the AAD logic.
> 
> Signed-off-by: David Rau <david.rau.zg@renesas.com>
> ---
>  sound/soc/codecs/da7219-aad.c | 42 
> ++++++++++++++++++++++++++++++-----
>  sound/soc/codecs/da7219-aad.h |  1 +
>  2 files changed, 37 insertions(+), 6 deletions(-)
> 
> diff --git a/sound/soc/codecs/da7219-aad.c 
> b/sound/soc/codecs/da7219-aad.c index bba73c44c219..08200ec259f9 
> 100644
> --- a/sound/soc/codecs/da7219-aad.c
> +++ b/sound/soc/codecs/da7219-aad.c
> @@ -352,9 +352,14 @@ static irqreturn_t da7219_aad_irq_thread(int irq, void *data)
>  	struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
>  	struct da7219_priv *da7219 = snd_soc_component_get_drvdata(component);
>  	u8 events[DA7219_AAD_IRQ_REG_MAX];
> -	u8 statusa;
> +	u8 statusa, srm_st;
>  	int i, report = 0, mask = 0;
>  
> +	srm_st = snd_soc_component_read(component, DA7219_PLL_SRM_STS) & DA7219_PLL_SRM_STS_MCLK;
> +	msleep(da7219_aad->gnd_switch_delay * ((srm_st == 0x0) ? 2 : 1) - 
> +4);

Ever since this patch was applied to ChromeOS, we have observed hung task crashes in da7219_aad_irq_thread().

Is it really appropriate to sleep up to (256 * 2) - 4 = 508 ms in an interrupt handler ?

Thanks,
Guenter

> +	/* Enable ground switch */
> +	snd_soc_component_update_bits(component, 0xFB, 0x01, 0x01);
> +
>  	/* Read current IRQ events */
>  	regmap_bulk_read(da7219->regmap, DA7219_ACCDET_IRQ_EVENT_A,
>  			 events, DA7219_AAD_IRQ_REG_MAX);
> @@ -454,8 +459,8 @@ static irqreturn_t da7219_aad_irq_thread(int irq, void *data)
>  			snd_soc_dapm_disable_pin(dapm, "Mic Bias");
>  			snd_soc_dapm_sync(dapm);
>  
> -			/* Enable ground switch */
> -			snd_soc_component_update_bits(component, 0xFB, 0x01, 0x01);
> +			/* Disable ground switch */
> +			snd_soc_component_update_bits(component, 0xFB, 0x01, 0x00);
>  		}
>  	}
>  
> @@ -831,6 +836,32 @@ static void da7219_aad_handle_pdata(struct snd_soc_component *component)
>  	}
>  }
>  
> +static void da7219_aad_handle_gnd_switch_time(struct 
> +snd_soc_component *component) {
> +	struct da7219_priv *da7219 = snd_soc_component_get_drvdata(component);
> +	struct da7219_aad_priv *da7219_aad = da7219->aad;
> +	u8 jack_det;
> +
> +	jack_det = snd_soc_component_read(component, DA7219_ACCDET_CONFIG_2)
> +		& DA7219_JACK_DETECT_RATE_MASK;
> +	switch (jack_det) {
> +	case 0x00:
> +		da7219_aad->gnd_switch_delay = 32;
> +		break;
> +	case 0x10:
> +		da7219_aad->gnd_switch_delay = 64;
> +		break;
> +	case 0x20:
> +		da7219_aad->gnd_switch_delay = 128;
> +		break;
> +	case 0x30:
> +		da7219_aad->gnd_switch_delay = 256;
> +		break;
> +	default:
> +		da7219_aad->gnd_switch_delay = 32;
> +		break;
> +	}
> +}
>  
>  /*
>   * Suspend/Resume
> @@ -908,9 +939,6 @@ int da7219_aad_init(struct snd_soc_component *component)
>  	snd_soc_component_update_bits(component, DA7219_ACCDET_CONFIG_1,
>  			    DA7219_BUTTON_CONFIG_MASK, 0);
>  
> -	/* Enable ground switch */
> -	snd_soc_component_update_bits(component, 0xFB, 0x01, 0x01);
> -
>  	INIT_WORK(&da7219_aad->btn_det_work, da7219_aad_btn_det_work);
>  	INIT_WORK(&da7219_aad->hptest_work, da7219_aad_hptest_work);
>  
> @@ -928,6 +956,8 @@ int da7219_aad_init(struct snd_soc_component *component)
>  	regmap_bulk_write(da7219->regmap, DA7219_ACCDET_IRQ_MASK_A,
>  			  &mask, DA7219_AAD_IRQ_REG_MAX);
>  
> +	da7219_aad_handle_gnd_switch_time(component);
> +
>  	return 0;
>  }
>  EXPORT_SYMBOL_GPL(da7219_aad_init);
> diff --git a/sound/soc/codecs/da7219-aad.h 
> b/sound/soc/codecs/da7219-aad.h index f48a12012ef3..21fdf53095cc 
> 100644
> --- a/sound/soc/codecs/da7219-aad.h
> +++ b/sound/soc/codecs/da7219-aad.h
> @@ -187,6 +187,7 @@ enum da7219_aad_event_regs {  struct 
> da7219_aad_priv {
>  	struct snd_soc_component *component;
>  	int irq;
> +	int gnd_switch_delay;
>  
>  	u8 micbias_pulse_lvl;
>  	u32 micbias_pulse_time;
> --
> 2.17.1
> 

  reply	other threads:[~2023-01-19 11:03 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-21  5:07 David Rau
2022-12-01 13:24 ` Mark Brown
2023-01-17 19:56 ` Guenter Roeck
2023-01-19 11:02   ` David Rau [this message]
2023-01-19 16:12     ` Guenter Roeck
2023-01-31  3:58       ` David Rau
2023-01-31  6:16         ` Guenter Roeck
2023-01-31 12:08           ` Mark Brown
2023-02-02 15:51             ` Guenter Roeck
2023-02-02 17:04               ` Mark Brown
2023-02-02 18:39                 ` Guenter Roeck
2023-02-02 19:36                   ` Mark Brown
2023-02-04 15:42                     ` Guenter Roeck
2023-02-06  5:38                       ` David Rau
2023-02-06 14:04                         ` Guenter Roeck
2023-02-07  2:42                           ` David Rau
2023-02-07  2:48                             ` Guenter Roeck
2023-02-08 18:04                             ` Guenter Roeck
2023-02-09  3:05                               ` David Rau
2023-02-09  3:32                                 ` Guenter Roeck
2023-02-06 13:37                       ` Mark Brown
2023-02-06  1:05                     ` David Rau

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=OS3PR01MB66416CEF9F6E5AE62D194BACCDC49@OS3PR01MB6641.jpnprd01.prod.outlook.com \
    --to=david.rau.zg@renesas.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=perex@perex.cz \
    --cc=support.opensource@diasemi.com \
    --cc=tiwai@suse.com \
    --cc=we730128@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®