LSI MegaRAID ATA driver (COMPAQ Proliant DL-320 G2)

LSI MegaRAID ATA driver (COMPAQ Proliant DL-320 G2)

[Pedro Requejo]

Hello,

I purchase a COMPAQ DL-320 G2. I've installed Redhat 7.3 with a driver disk
supplied by COMPAQ, that contains the binary of LSI MegaRAID ATA controller
driver, without problems.

Well... Now, I need to upgrade and rebuild the kernel (2.4.18 to 2.4.20)
but, I haven't got the source code of the LSI MegaRAID ATA controller.

Can anybody help me?

Best Regards,

RE: LSI MegaRAID ATA driver (COMPAQ Proliant DL-320 G2)

[Alan Cox]

On Maw, 2003-04-29 at 17:27, Mukker, Atul wrote:
>  > > Well... Now, I need to upgrade and rebuild the kernel (2.4.18 
> > > to 2.4.20)
> > > but, I haven't got the source code of the LSI MegaRAID ATA 
> > controller.
> > > 
> That's right, the source for this software stack is not released under GPL.
> We do release the RPM packages to update driver. This is true for the stock
> kernels only. It is not possible to use the RPM for all (or individually
> compiled) kernels

Or last time I checked you can load the CMD IDE driver just use the
standard kernel software raid instead of the AMI one. 

RE: LSI MegaRAID ATA driver (COMPAQ Proliant DL-320 G2)

[Mukker, Atul]

 
> > Well... Now, I need to upgrade and rebuild the kernel (2.4.18 
> > to 2.4.20)
> > but, I haven't got the source code of the LSI MegaRAID ATA 
> controller.
> > 
That's right, the source for this software stack is not released under GPL.
We do release the RPM packages to update driver. This is true for the stock
kernels only. It is not possible to use the RPM for all (or individually
compiled) kernels

> 
> Shouldn't that more or less be the same as the LSI MegaRaid 
> SCSI driver.
> Both adapters are based on the same BIOS design.
> 
> I'm pretty sure, that it should work on the default MegaRaid 
> module (SCSI
> low-level drivers).
No, these are separate drivers, at least as of now.

-Atul Mukker <atulm@lsil.com>

RE: LSI MegaRAID ATA driver (COMPAQ Proliant DL-320 G2)

[Pedro Requejo]

Hello,

I'm just try to boot a kernel with a default AMI MegaRaid support (SCSI
low-level driver), but cannot mount the root filesystem :-(

This controller is very newer than AMI MegaRaid. By default, any kernel
can't recognize this controller. Need a patch. :-(

¿Does anybody have a COMPAQ Proliant DL-320 G2 or ML-310 or ML-330 ATA
version with linux running???

Thanks.

-----Mensaje original-----
De: linux-kernel-owner@vger.kernel.org
[mailto:linux-kernel-owner@vger.kernel.org]En nombre de
Martin_List-Petersen@Dell.com
Enviado el: martes, 29 de abril de 2003 9:49
Para: prequejo@dbs.es; linux-kernel@vger.kernel.org
Asunto: RE: LSI MegaRAID ATA driver (COMPAQ Proliant DL-320 G2)


> I purchase a COMPAQ DL-320 G2. I've installed Redhat 7.3 with
> a driver disk
> supplied by COMPAQ, that contains the binary of LSI MegaRAID
> ATA controller
> driver, without problems.
>
> Well... Now, I need to upgrade and rebuild the kernel (2.4.18
> to 2.4.20)
> but, I haven't got the source code of the LSI MegaRAID ATA controller.
>

Shouldn't that more or less be the same as the LSI MegaRaid SCSI driver.
Both adapters are based on the same BIOS design.

I'm pretty sure, that it should work on the default MegaRaid module (SCSI
low-level drivers).

Regards,
Martin List-Petersen

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

RE: LSI MegaRAID ATA driver (COMPAQ Proliant DL-320 G2)

[Martin_List-Petersen]

> I purchase a COMPAQ DL-320 G2. I've installed Redhat 7.3 with 
> a driver disk
> supplied by COMPAQ, that contains the binary of LSI MegaRAID 
> ATA controller
> driver, without problems.
> 
> Well... Now, I need to upgrade and rebuild the kernel (2.4.18 
> to 2.4.20)
> but, I haven't got the source code of the LSI MegaRAID ATA controller.
> 

Shouldn't that more or less be the same as the LSI MegaRaid SCSI driver.
Both adapters are based on the same BIOS design.

I'm pretty sure, that it should work on the default MegaRaid module (SCSI
low-level drivers).

Regards,
Martin List-Petersen