* Via-rhine problem with older hardware
@ 2003-07-02 15:02 Hakan Lennestal
2003-07-07 11:57 ` William Gallafent
0 siblings, 1 reply; 2+ messages in thread
From: Hakan Lennestal @ 2003-07-02 15:02 UTC (permalink / raw)
To: linux-kernel
Hi !
I'm having troubles with newer via-rhine drivers (1.1.17) and older
via-rhine hardware (VT86C100A [Rhine] (rev 06)).
With moderate CPU load (10-15 %) and some network load
(a couple of houndred kbps) I'm repeatedly getting:
Jul 1 19:56:52 ip2 kernel: NETDEV WATCHDOG: eth0: transmit timed out
Jul 1 19:56:52 ip2 kernel: eth0: Transmit timed out, status 0000, PHY
status 782d, resetting...
Everything works just smoothly with via-rhine 1.1.15.
This machine does not have ACPI (or APM) enabled.
Regards.
/Håkan
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Via-rhine problem with older hardware
2003-07-02 15:02 Via-rhine problem with older hardware Hakan Lennestal
@ 2003-07-07 11:57 ` William Gallafent
0 siblings, 0 replies; 2+ messages in thread
From: William Gallafent @ 2003-07-07 11:57 UTC (permalink / raw)
To: Hakan Lennestal; +Cc: linux-kernel
On Wed, 2 Jul 2003, Hakan Lennestal wrote:
>
> Hi !
>
> I'm having troubles with newer via-rhine drivers (1.1.17) and older
> via-rhine hardware (VT86C100A [Rhine] (rev 06)).
> With moderate CPU load (10-15 %) and some network load
> (a couple of houndred kbps) I'm repeatedly getting:
> Jul 1 19:56:52 ip2 kernel: NETDEV WATCHDOG: eth0: transmit timed out
> Jul 1 19:56:52 ip2 kernel: eth0: Transmit timed out, status 0000, PHY
> status 782d, resetting...
>
> Everything works just smoothly with via-rhine 1.1.15.
>
> This machine does not have ACPI (or APM) enabled.
I had similar problems a while ago on an AMD 760MP system with APIC
enabled. Have you tried booting 'noapic'? The problem went away with a BIOS
update, too, so make sure you have the latest BIOS.
--
Bill Gallafent.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-07-07 11:40 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-07-02 15:02 Via-rhine problem with older hardware Hakan Lennestal
2003-07-07 11:57 ` William Gallafent
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®