Re: Please

[Andre Hedrick <andre@linuxdiskcert.org>]

On Sun, 3 Mar 2002, john slee wrote:

> On Sat, Mar 02, 2002 at 04:43:58PM +0100, Hans-Peter Jansen wrote:
> > The problem is called Andre Hedrick, a guy who is talking in miracles,
> > but seems to be unable to fix either the issues with:
> >  - the single TX4 with multiple PDC20270
> > nor:
> >  - multiple TX2 with PDC20268
> > 
> > or at least ignores further communication on that problems, if you
> > don't use some magic storage peoples language.(*) TM in a parallel 
> > universe, not too far from here...
> 
> so you're going to fix the problems yourself then?
> 
> j.

You mean this does not work for you?  Serious question, not being flip.

Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD7441: IDE controller on PCI bus 00 dev 39
AMD7441: chipset revision 3
AMD7441: not 100% native mode: will probe irqs later
AMD7441: disabling single-word DMA support (revision < C4)
    ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio
PDC20270: IDE controller on PCI bus 03 dev 08
PDC20270: chipset revision 2
PDC20270: not 100% native mode: will probe irqs later
    ide2: BM-DMA at 0x9000-0x9007, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0x9008-0x900f, BIOS settings: hdg:pio, hdh:pio
PDC20270: IDE controller on PCI bus 03 dev 10
PDC20270: chipset revision 2
PDC20270: not 100% native mode: will probe irqs later
PDC20270: ROM enabled at 0x000dc000
    ide4: BM-DMA at 0xa400-0xa407, BIOS settings: hdi:pio, hdj:pio
    ide5: BM-DMA at 0xa408-0xa40f, BIOS settings: hdk:pio, hdl:pio
hda: IBM-DTLA-307075, ATA DISK drive
hdc: LTN242, ATAPI CD/DVD-ROM drive
hde: Maxtor 4G160J8, ATA DISK drive
hdg: Maxtor 4G160J8, ATA DISK drive
hdi: Maxtor 4G160J8, ATA DISK drive
hdk: Maxtor 4G160J8, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0x8000-0x8007,0x8402 on irq 11
ide3 at 0x8800-0x8807,0x8c02 on irq 11
ide4 at 0x9400-0x9407,0x9802 on irq 11
ide5 at 0x9c00-0x9c07,0xa002 on irq 11
hda: 150136560 sectors (76870 MB) w/1916KiB Cache, CHS=9345/255/63, UDMA(100)
hde: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(100)
hdg: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(100)
hdi: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(100)
hdk: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(100)
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 >
 /dev/ide/host2/bus0/target0/lun0: p1
 /dev/ide/host2/bus1/target0/lun0: p1
 /dev/ide/host4/bus0/target0/lun0: p1
 /dev/ide/host4/bus1/target0/lun0: p1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077



Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD7441: IDE controller on PCI bus 00 dev 39
AMD7441: chipset revision 3
AMD7441: not 100% native mode: will probe irqs later
AMD7441: disabling single-word DMA support (revision < C4)
    ide0: BM-DMA at 0xb000-0xb007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xb008-0xb00f, BIOS settings: hdc:DMA, hdd:pio
PDC20269: IDE controller on PCI bus 00 dev 40
PDC20269: chipset revision 2
PDC20269: not 100% native mode: will probe irqs later
    ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:pio, hdh:pio
PDC20269: IDE controller on PCI bus 00 dev 48
PDC20269: chipset revision 2
PDC20269: not 100% native mode: will probe irqs later
    ide4: BM-DMA at 0xe800-0xe807, BIOS settings: hdi:pio, hdj:pio
    ide5: BM-DMA at 0xe808-0xe80f, BIOS settings: hdk:pio, hdl:pio
hda: IBM-DTLA-307075, ATA DISK drive
hdc: LTN242, ATAPI CD/DVD-ROM drive
hde: Maxtor 4G160J8, ATA DISK drive
hdg: Maxtor 4G160J8, ATA DISK drive
hdi: Maxtor 4G160J8, ATA DISK drive
hdk: Maxtor 4G160J8, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0xc400-0xc407,0xc802 on irq 10
ide3 at 0xcc00-0xcc07,0xd002 on irq 10
ide4 at 0xd800-0xd807,0xdc02 on irq 11
ide5 at 0xe000-0xe007,0xe402 on irq 11
hda: 150136560 sectors (76870 MB) w/1916KiB Cache, CHS=9345/255/63, UDMA(100)
hde: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(133)
hdg: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(133)
hdi: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(133)
hdk: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(133)
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 >
 /dev/ide/host2/bus0/target0/lun0: p1
 /dev/ide/host2/bus1/target0/lun0: p1
 /dev/ide/host4/bus0/target0/lun0: p1
 /dev/ide/host4/bus1/target0/lun0: p1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077


Clearly they work, the obvious point that is missed is the work is not
being accepted.  Oh and I am human, too, regardless what most think or
hate about me.

Regards,

Andre Hedrick
Linux Disk Certification Project                Linux ATA Development