* Re: [PATCH 2.4.20] Via AGP 8633
2002-12-07 9:18 [PATCH 2.4.20] Via AGP 8633 Nathaniel Russell
@ 2002-12-07 9:19 ` Nathaniel Russell
0 siblings, 0 replies; 2+ messages in thread
From: Nathaniel Russell @ 2002-12-07 9:19 UTC (permalink / raw)
To: reddog83; +Cc: linux-kernel
[-- Attachment #1: Type: TEXT/PLAIN, Size: 462 bytes --]
Oh i forgot to also attch my dmesg for proof.
On Sat, 7 Dec 2002, Nathaniel Russell wrote:
> This patch add's support for the Via 8633 AGP Card it is diffed against
> Linux Kernel-2.4.20 and most likely applies to current 2.5.x series
> kernel.
> Please Apply.
>
> Nathaniel
>
> PS. Thank you Dave for pointing me in the right direction, it just alittle
> common sense and it works.
>
> Please CC me as I'm not subsribed to the list
> reddog83@chartermi.net
>
[-- Attachment #2: dmesg --]
[-- Type: TEXT/PLAIN, Size: 9572 bytes --]
Linux version 2.4.20 (root@reddog) (gcc version 3.2.1) #1 Fri Dec 6 01:28:57 EST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
BIOS-e820: 0000000007ff0000 - 0000000007ff3000 (ACPI NVS)
BIOS-e820: 0000000007ff3000 - 0000000008000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB LOWMEM available.
On node 0 totalpages: 32752
zone(0): 4096 pages.
zone(1): 28656 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=linux ro root=301
Initializing CPU#0
Detected 648.910 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1294.33 BogoMIPS
Memory: 126332k/131008k available (1730k kernel code, 4288k reserved, 623k data, 104k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: After generic, caps: 008031b5 808030b5 00000000 00000000
CPU: Common caps: 008031b5 808030b5 00000000 00000000
CPU: Centaur VIA Samuel stepping 03
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb460, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router VIA [1106/3074] at 00:11.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
ACPI: Core Subsystem version [20011018]
ACPI: Subsystem enabled
ACPI: System firmware supports S0 S1 S4 S5
Processor[0]: C0 C1 C2, 2 throttling states
ACPI: Power Button (FF) found
ACPI: Multiple power buttons detected, ignoring fixed-feature
ACPI: Power Button (CM) found
ACPI: Sleep Button (CM) found
ACPI: Thermal Zone found
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
smapi::smapi_init, ERROR invalid usSmapiID
mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
mwave: mwavedd::mwave_init: Error: Failed to initialize board data
mwave: mwavedd::mwave_init: Error: Failed to initialize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 89
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD400BB-53DEA0, ATA DISK drive
hdc: Pioneer DVD-ROM ATAPIModel DVD-106S 012, ATAPI CD/DVD-ROM drive
hdd: PCRW804, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c0396ea4, I/O limit 4095Mb (mask 0xffffffff)
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3 hda4
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
ide-floppy driver 0.99.newide
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: PIONEER Model: DVD-ROM DVD-106 Rev: 1.22
Type: CD-ROM ANSI SCSI revision: 02
Vendor: PHILIPS Model: PCRW804 Rev: 2,1
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0
sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 511.600 MB/sec
32regs : 285.600 MB/sec
pII_mmx : 557.600 MB/sec
p5_mmx : 595.200 MB/sec
raid5: using function: p5_mmx (595.200 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.5+(22/07/2002)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 104k freed
Adding Swap: 1714600k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
reiserfs: checking transaction log (device 03:02) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
rivafb: RIVA MTRR set to ON
Console: switching to colour frame buffer device 80x30
rivafb: PCI nVidia NV4 framebuffer ver 0.9.3 (RIVA-VTNT2, 8MB @ 0xE4000000)
Via 686a audio driver 1.9.1
PCI: Found IRQ 11 for device 00:11.5
PCI: Sharing IRQ 11 with 00:0a.0
ac97_codec: AC97 Audio codec, id: ICE17(ICE1232)
via82cxxx: board #1 at 0xE800, IRQ 11
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 11 for device 00:11.2
PCI: Sharing IRQ 11 with 00:0a.1
PCI: Sharing IRQ 11 with 00:11.3
PCI: Sharing IRQ 11 with 00:11.4
uhci.c: USB UHCI at I/O 0xdc00, IRQ 11
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:11.3
PCI: Sharing IRQ 11 with 00:0a.1
PCI: Sharing IRQ 11 with 00:11.2
PCI: Sharing IRQ 11 with 00:11.4
uhci.c: USB UHCI at I/O 0xe000, IRQ 11
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:11.4
PCI: Sharing IRQ 11 with 00:0a.1
PCI: Sharing IRQ 11 with 00:11.2
PCI: Sharing IRQ 11 with 00:11.3
uhci.c: USB UHCI at I/O 0xe400, IRQ 11
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:0a.2
PCI: Sharing IRQ 11 with 00:08.0
hcd.c: ehci-hcd @ 00:0a.2, NEC Corporation USB 2.0
hcd.c: irq 11, pci mem ca1c4000
usb.c: new USB bus registered, assigned bus number 4
ehci-hcd.c: USB 2.0 support enabled, EHCI rev 0.95
hub.c: USB hub found
hub.c: 5 ports detected
PCI: Found IRQ 11 for device 00:0a.0
PCI: Sharing IRQ 11 with 00:11.5
usb-ohci.c: USB OHCI at membase 0xca1cc000, IRQ 11
usb-ohci.c: usb-00:0a.0, NEC Corporation USB
usb.c: new USB bus registered, assigned bus number 5
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Found IRQ 11 for device 00:0a.1
PCI: Sharing IRQ 11 with 00:11.2
PCI: Sharing IRQ 11 with 00:11.3
PCI: Sharing IRQ 11 with 00:11.4
usb-ohci.c: USB OHCI at membase 0xca1ce000, IRQ 11
usb-ohci.c: usb-00:0a.1, NEC Corporation USB (#2)
usb.c: new USB bus registered, assigned bus number 6
hub.c: USB hub found
hub.c: 2 ports detected
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 11 for device 00:09.0
eth0: D-Link DFE-538TX (RealTek RTL8139) at 0xca1d7000, 00:50:ba:c8:1c:12, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139C'
es1370: version v0.37 time 03:23:54 Dec 6 2002
PCI: Found IRQ 11 for device 00:08.0
PCI: Sharing IRQ 11 with 00:0a.2
es1370: found adapter at io 0xd000 irq 11
es1370: features: joystick off, line in, mic impedance 0
usb-uhci.c: $Revision: 1.275 $ time 03:27:43 Dec 6 2002
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 41e1.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 94M
agpgart: Unsupported Via chipset (device id: 3091), you might want to try agp_try_unsupported=1.
agpgart: no supported devices found.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 94M
agpgart: Unsupported Via chipset (device id: 3091), you might want to try agp_try_unsupported=1.
agpgart: no supported devices found.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 94M
agpgart: Detected Via 8633 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
^ permalink raw reply [flat|nested] 2+ messages in thread