From: Stephan van Hienen <kernel@ddx.a2000.nu>
To: Andre Hedrick <andre@linux-ide.org>
Cc: Mark Hahn <hahn@physics.mcmaster.ca>, linux-kernel@vger.kernel.org
Subject: Re: onboard ICH4 seen as ICH3 (ultra100 controller onboard) (2.4.20/2.4.21-pre7)
Date: Sun, 6 Apr 2003 12:20:42 +0200 (CEST) [thread overview]
Message-ID: <Pine.LNX.4.53.0304061216200.6973@ddx.a2000.nu> (raw)
In-Reply-To: <Pine.LNX.4.10.10304052330410.32611-100000@master.linux-ide.org>
On Sat, 5 Apr 2003, Andre Hedrick wrote:
>
> Looking back over the thread, you have a failed cable detect.
> I do not know why, but pat ide0=ata66 and ide1=ata66 to see if that is a
> temp work-around.
ok this works (but ide0=ata100/ide1=at100 doesn't work)
hda: 351651888 sectors (180046 MB) w/2048KiB Cache, CHS=21889/255/63,
UDMA(100)
blk: queue c03ddf68, I/O limit 4095Mb (mask 0xffffffff)
hdc: 351651888 sectors (180046 MB) w/2048KiB Cache, CHS=21889/255/63,
UDMA(100)
blk: queue c03de2cc, I/O limit 4095Mb (mask 0xffffffff)
]$ cat /proc/ide/piix
Intel PIIX4 Ultra 100 Chipset.
--------------- Primary Channel ---------------- Secondary Channel
-------------
enabled enabled
--------------- drive0 --------- drive1 -------- drive0 ---------- drive1
------
DMA enabled: yes no yes no
UDMA enabled: yes no yes no
UDMA enabled: 3 X 3 X
UDMA
DMA
PIO
]# hdparm -X69 /dev/hda
/dev/hda:
setting xfermode to 69 (UltraDMA mode5)
]# hdparm -X69 /dev/hdc
/dev/hdc:
setting xfermode to 69 (UltraDMA mode5)
]# cat /proc/ide/piix
Intel PIIX4 Ultra 100 Chipset.
--------------- Primary Channel ---------------- Secondary Channel
-------------
enabled enabled
--------------- drive0 --------- drive1 -------- drive0 ---------- drive1
------
DMA enabled: yes no yes no
UDMA enabled: yes no yes no
UDMA enabled: 5 X 5 X
UDMA
DMA
PIO
>
> You said nothing selected?
>
> Does that mean your bios is set to [none] for all devices?
> If so change it to [auto], [none] tends to do strange things.
then i get get the 'lba48 problem', my bios doesn't support lba48
next prev parent reply other threads:[~2003-04-06 10:09 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <Pine.LNX.4.44.0304051622180.31153-100000@coffee.psychology.mcmaster.ca>
2003-04-05 21:27 ` Stephan van Hienen
2003-04-05 21:39 ` Andre Hedrick
2003-04-05 22:24 ` Stephan van Hienen
2003-04-06 7:33 ` Andre Hedrick
2003-04-06 10:20 ` Stephan van Hienen [this message]
[not found] <Pine.LNX.4.44.0304051431220.31153-100000@coffee.psychology.mcmaster.ca>
2003-04-05 21:17 ` Stephan van Hienen
2003-04-05 9:53 kernel
2003-04-05 16:39 ` Alan Cox
2003-04-05 19:05 ` Stephan van Hienen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.53.0304061216200.6973@ddx.a2000.nu \
--to=kernel@ddx.a2000.nu \
--cc=andre@linux-ide.org \
--cc=hahn@physics.mcmaster.ca \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®