From: "Fr�d�ric L. W. Meunier" <0@pervalidus.tk>
To: linux-kernel@vger.kernel.org
Subject: Re: linux-2.4.21 released
Date: Sun, 15 Jun 2003 21:34:49 -0300 (BRT) [thread overview]
Message-ID: <Pine.LNX.4.56.0306152053160.160@pervalidus.dyndns.org> (raw)
Daniel Egger wrote:
>> with module via-rhine on ECS_L7VTA works for you or not..?
> Nope, it doesn't work, but the problem is the IOAPIC not
> ACPI....
> It works if I disable the IOAPIC in the BIOS.
I don't use ACPI (should I ?) but have the same problem with my
ECS K7VTA3 5.0C and the onboard Realtek or a 3Com 3C905CX-TXNM,
although I had and still have other problems without IO-APIC,
like modprobe bttv instant freezes when USB 2.0 shared the same
IRQ. To "solve" I moved the card to another slot.
The problem is that loading USB without IO-APIC still gives
instant freezes. I first experienced it with bare.i from
Slackware 9.0 and SuperRescue 2.1.1, which stop at
hcd.c:ehci-hcd@00:10:3,VIA Technologies, Inc. USB 2.0
, and later doing the usual modprobe with 2.4.2{0,1}.
I just tested with 2.4.21. With IO-APIC everything worked
except the ethernet. Testing USB:
# modprobe usbcore
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
# modprobe usb-uhci
usb-uhci.c: $Revision: 1.275 $ time 01:28:00 Jun 14 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 21
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 21
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 21
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: new USB device 00:10.0-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x46d/0xc20a) is not claimed by any active driver.
# modprobe ehci-hcd
ehci-hcd 00:10.3: VIA Technologies, Inc. USB 2.0
ehci-hcd 00:10.3: irq 19, pci mem e2865000
usb.c: new USB bus registered, assigned bus number 4
PCI: 00:10.3 PCI cache line size set incorrectly (32 bytes) by BIOS/FW.
PCI: 00:10.3 PCI cache line size corrected to 64.
ehci-hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22
usb.c: USB disconnect on device 00:10.0-1 address 2
hub.c: USB hub found
hub.c: 6 ports detected
hub.c: new USB device 00:10.0-1, assigned address 3
usb.c: USB device 3 (vend/prod 0x46d/0xc20a) is not claimed by any active driver.
Without IO-APIC (noapic boot option) modprobe usbcore worked,
but modprobe usb-uhci freezed after printing
usb-uhci.c: $Revision: 1.275 $ time 01:28:00 Jun 14 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:10:0
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
I'm starting to think there's something wrong with the
motherboard as the BIOS couldn't locate my Sound Blaster Live!
5.1 in any slot. I think I tried everything, also disabling all
onboard options, RAID, and FireWire. At the end I just sold it
and am now using the onboard sound.
USB works on Windows XP Professional SP1 (I could only test a
game pad) along with the ethernet, and I didn't have to move
the capture card to get it working there. I moved it to get it
working on Linux.
I uploaded my 2.4.21 .config, /proc/{ioports,interrupts,pci},
and the last 4 dmesg just in case someone is interested.
http://www.fredlwm.hpg.com.br/tmp/.config-2.4.21.txt
http://www.fredlwm.hpg.com.br/tmp/2.4.21-IO-APIC.txt
http://www.fredlwm.hpg.com.br/tmp/2.4.21-noapic.txt
http://www.fredlwm.hpg.com.br/tmp/dmesg-2003-06-15_17:13:09.txt
http://www.fredlwm.hpg.com.br/tmp/dmesg-2003-06-15_17:33:45.txt
http://www.fredlwm.hpg.com.br/tmp/dmesg-2003-06-15_17:44:53.txt
http://www.fredlwm.hpg.com.br/tmp/dmesg-2003-06-15_17:51:51.txt
BTW, what does noapic do when you enable all APIC options and
when you don't enable IO-APIC ?
next reply other threads:[~2003-06-16 0:21 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-06-16 0:34 Fr�d�ric L. W. Meunier [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-06-22 19:46 Nicolas Mailhot
2003-06-22 18:51 Fr�d�ric L. W. Meunier
2003-06-13 16:40 Go Marcelo
2003-06-13 14:53 Marcelo Tosatti
2003-06-13 16:56 ` Stefan Foerster
2003-06-13 16:56 ` Damian Kolkowski
2003-06-13 17:37 ` Stephan von Krawczynski
2003-06-13 17:19 ` Damian Kołkowski
2003-06-13 17:49 ` Alan Cox
2003-06-13 17:45 ` Damian Kolkowski
2003-06-13 18:36 ` Damian Kołkowski
2003-06-13 21:04 ` Daniel Egger
2003-06-13 21:31 ` Damian Kołkowski
2003-06-15 14:29 ` Daniel Egger
2003-06-14 15:59 ` Krzysiek Taraszka
2003-06-14 16:16 ` Damian Kołkowski
2003-06-13 18:10 ` Serguei Miridonov
2003-06-13 17:22 ` Matthias Andree
2003-06-13 17:29 ` Christoph Hellwig
2003-06-14 21:35 ` Diego Calleja García
2003-06-14 21:58 ` Ramón Rey Vicente
2003-06-15 12:02 ` Matthias Andree
2003-06-13 18:56 ` Ramón Rey Vicenteey Vicente
2003-06-13 20:03 ` Robert Love
2003-06-13 20:27 ` Ramón Rey Vicente
2003-06-13 21:50 ` J.A. Magallon
2003-06-14 7:31 ` Wiktor Wodecki
2003-06-13 19:14 ` Udo A. Steinberg
2003-06-13 19:24 ` Ross Biro
2003-06-14 2:02 ` Andrea Arcangeli
2003-06-14 4:28 ` Ben Collins
2003-06-14 15:36 ` CJ
2003-06-14 15:54 ` Jörn Engel
2003-06-14 16:29 ` CJ
2003-06-15 19:06 ` Jörn Engel
2003-06-16 22:22 ` Lukasz Trabinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.56.0306152053160.160@pervalidus.dyndns.org \
--to=0@pervalidus.tk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®