Re: [linux-dvb] Re: DST/BT878 module customization (.. was: Critical points about ...)

[Trent Piepho <xyzzy@speakeasy.org>]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: TEXT/PLAIN; charset=X-UNKNOWN, Size: 1422 bytes --]

On Tue, 1 May 2007, Mauro Carvalho Chehab wrote:
> Em Ter, 2007-05-01 às 16:16 -0700, Trent Piepho escreveu:
> > On Tue, 1 May 2007, Mauro Carvalho Chehab wrote:
> > > With this configuration, dvb-bt8xx hangs during initialization,
> > > generating an OOPS, if you have a board with DST (modprobe dvb-bt8xx
> > > never returns).
> >
> > Stupid typo in the first patch, a != should have been ==.
> >
> > Fixed:
> > http://linuxtv.org/hg/~tap/dst-new
>
> With the changes, the dst unselection worked.
>
> Those are the logs with dst unselected:
>
> DVB: registering new adapter (bttv0).
> DVB: Unable to find symbol dst_attach()
> frontend_init: Could not find a Twinhan DST.
> dvb-bt8xx: A frontend driver was not found for device 109e/0878 subsystem fbfb/f800

This is the dvb_attach() "not found" message.  You should see this same
message if you leave dst selected and then just delete the dst modules before
loading dvb-bt8xx.

If you turn dvb_attach off, you should see a different "dst support was
disabled" message (and no crash!).

> However, when dst is selected, I got those errors:

When I made this patch I was basing it off a patch I made around 9 months
ago.  I thought since that one was ok, this would be ok too, and in my
hurry to get it done I've clearly put too little effort into checking it,
and I'm sorry to have wasted your time.

I promise, this time it's right!
http://linuxtv.org/hg/~tap/dst-new