From: Hugh Dickins <hugh@veritas.com>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 09/13] scan_swap_map restyled
Date: Sat, 9 Jul 2005 01:08:31 +0100 (BST) [thread overview]
Message-ID: <Pine.LNX.4.61.0507090107420.13391@goblin.wat.veritas.com> (raw)
In-Reply-To: <Pine.LNX.4.61.0507090057340.13391@goblin.wat.veritas.com>
Rewrite scan_swap_map to allocate in just the same way as before
(taking the next free entry SWAPFILE_CLUSTER-1 times, then restarting at
the lowest wholly empty cluster, falling back to lowest entry if none),
but with a view towards dropping the lock in the next patch.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
---
mm/swapfile.c | 91 +++++++++++++++++++++++++++++-----------------------------
1 files changed, 47 insertions(+), 44 deletions(-)
--- swap8/mm/swapfile.c 2005-07-08 19:14:54.000000000 +0100
+++ swap9/mm/swapfile.c 2005-07-08 19:15:06.000000000 +0100
@@ -84,64 +84,67 @@ void swap_unplug_io_fn(struct backing_de
static inline unsigned long scan_swap_map(struct swap_info_struct *si)
{
- unsigned long offset;
+ unsigned long offset, last_in_cluster;
+
/*
- * We try to cluster swap pages by allocating them
- * sequentially in swap. Once we've allocated
- * SWAPFILE_CLUSTER pages this way, however, we resort to
- * first-free allocation, starting a new cluster. This
- * prevents us from scattering swap pages all over the entire
- * swap partition, so that we reduce overall disk seek times
- * between swap pages. -- sct */
- if (si->cluster_nr) {
- while (si->cluster_next <= si->highest_bit) {
- offset = si->cluster_next++;
+ * We try to cluster swap pages by allocating them sequentially
+ * in swap. Once we've allocated SWAPFILE_CLUSTER pages this
+ * way, however, we resort to first-free allocation, starting
+ * a new cluster. This prevents us from scattering swap pages
+ * all over the entire swap partition, so that we reduce
+ * overall disk seek times between swap pages. -- sct
+ * But we do now try to find an empty cluster. -Andrea
+ */
+
+ if (unlikely(!si->cluster_nr)) {
+ si->cluster_nr = SWAPFILE_CLUSTER - 1;
+ if (si->pages - si->inuse_pages < SWAPFILE_CLUSTER)
+ goto lowest;
+
+ offset = si->lowest_bit;
+ last_in_cluster = offset + SWAPFILE_CLUSTER - 1;
+
+ /* Locate the first empty (unaligned) cluster */
+ for (; last_in_cluster <= si->highest_bit; offset++) {
if (si->swap_map[offset])
- continue;
- si->cluster_nr--;
- goto got_page;
+ last_in_cluster = offset + SWAPFILE_CLUSTER;
+ else if (offset == last_in_cluster) {
+ si->cluster_next = offset-SWAPFILE_CLUSTER-1;
+ goto cluster;
+ }
}
+ goto lowest;
}
- si->cluster_nr = SWAPFILE_CLUSTER;
- /* try to find an empty (even not aligned) cluster. */
- offset = si->lowest_bit;
- check_next_cluster:
- if (offset+SWAPFILE_CLUSTER-1 <= si->highest_bit)
- {
- unsigned long nr;
- for (nr = offset; nr < offset+SWAPFILE_CLUSTER; nr++)
- if (si->swap_map[nr])
- {
- offset = nr+1;
- goto check_next_cluster;
- }
- /* We found a completly empty cluster, so start
- * using it.
- */
- goto got_page;
- }
- /* No luck, so now go finegrined as usual. -Andrea */
- for (offset = si->lowest_bit; offset <= si->highest_bit ; offset++) {
- if (si->swap_map[offset])
- continue;
- si->lowest_bit = offset+1;
- got_page:
- if (offset == si->lowest_bit)
+ si->cluster_nr--;
+cluster:
+ offset = si->cluster_next;
+ if (offset > si->highest_bit)
+lowest: offset = si->lowest_bit;
+ if (!si->highest_bit)
+ goto no_page;
+ if (!si->swap_map[offset]) {
+got_page: if (offset == si->lowest_bit)
si->lowest_bit++;
if (offset == si->highest_bit)
si->highest_bit--;
- if (si->lowest_bit > si->highest_bit) {
+ si->inuse_pages++;
+ if (si->inuse_pages == si->pages) {
si->lowest_bit = si->max;
si->highest_bit = 0;
}
si->swap_map[offset] = 1;
- si->inuse_pages++;
- si->cluster_next = offset+1;
+ si->cluster_next = offset + 1;
return offset;
}
- si->lowest_bit = si->max;
- si->highest_bit = 0;
+
+ while (++offset <= si->highest_bit) {
+ if (!si->swap_map[offset])
+ goto got_page;
+ }
+ goto lowest;
+
+no_page:
return 0;
}
next prev parent reply other threads:[~2005-07-09 0:10 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-07-09 0:00 [PATCH 00/13] some swapfile patches Hugh Dickins
2005-07-09 0:01 ` [PATCH 01/13] update swapfile i_sem comment Hugh Dickins
2005-07-09 0:01 ` [PATCH 02/13] correct swapfile nr_good_pages Hugh Dickins
2005-07-09 0:02 ` [PATCH 03/13] move destroy_swap_extents calls Hugh Dickins
2005-07-09 0:03 ` [PATCH 04/13] swap extent list is ordered Hugh Dickins
2005-07-09 0:04 ` [PATCH 05/13] show span of swap extents Hugh Dickins
2005-07-09 0:05 ` [PATCH 06/13] swap unsigned int consistency Hugh Dickins
2005-07-09 0:06 ` [PATCH 07/13] freeing update swap_list.next Hugh Dickins
2005-07-09 0:07 ` [PATCH 08/13] get_swap_page drop swap_list_lock Hugh Dickins
2005-07-09 0:08 ` Hugh Dickins [this message]
2005-07-09 0:09 ` [PATCH 10/13] scan_swap_map drop swap_device_lock Hugh Dickins
2005-07-09 0:10 ` [PATCH 11/13] scan_swap_map latency breaks Hugh Dickins
2005-07-09 0:11 ` [PATCH 12/13] swap_lock replace list+device Hugh Dickins
2005-07-09 0:15 ` [PATCH 13/13] update swsusp use of swap_info Hugh Dickins
2005-07-09 11:13 ` [PATCH 14/13] swsusp mod needed parentheses Hugh Dickins
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.61.0507090107420.13391@goblin.wat.veritas.com \
--to=hugh@veritas.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®