From: Christoph Lameter <christoph@graphe.net>
To: linux-kernel@vger.kernel.org
Cc: netdev@oss.sgi.com, akpm@osdl.org
Subject: [PATCH] NUMA aware allocation of transmit and receive buffers for e1000
Date: Tue, 17 May 2005 18:56:06 -0700 (PDT) [thread overview]
Message-ID: <Pine.LNX.4.62.0505171854490.20408@graphe.net> (raw)
NUMA awareness for the e1000 driver. Allocate transmit and receive buffers
on the node of the device.
Signed-off-by: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Justin M. Forbes <jmforbes@linuxtx.org>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Index: linux-2.6.11/drivers/net/e1000/e1000_main.c
===================================================================
--- linux-2.6.11.orig/drivers/net/e1000/e1000_main.c 2005-05-17 16:44:20.000000000 -0700
+++ linux-2.6.11/drivers/net/e1000/e1000_main.c 2005-05-17 17:47:43.000000000 -0700
@@ -120,8 +120,8 @@ int e1000_up(struct e1000_adapter *adapt
void e1000_down(struct e1000_adapter *adapter);
void e1000_reset(struct e1000_adapter *adapter);
int e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx);
-int e1000_setup_tx_resources(struct e1000_adapter *adapter);
-int e1000_setup_rx_resources(struct e1000_adapter *adapter);
+int e1000_setup_tx_resources(struct e1000_adapter *adapter, int node);
+int e1000_setup_rx_resources(struct e1000_adapter *adapter, int node);
void e1000_free_tx_resources(struct e1000_adapter *adapter);
void e1000_free_rx_resources(struct e1000_adapter *adapter);
void e1000_update_stats(struct e1000_adapter *adapter);
@@ -513,6 +513,7 @@ e1000_probe(struct pci_dev *pdev,
netdev->mem_start = mmio_start;
netdev->mem_end = mmio_start + mmio_len;
netdev->base_addr = adapter->hw.io_base;
+ netdev->node = pcibus_to_node(pdev->bus);
adapter->bd_number = cards_found;
@@ -785,12 +786,12 @@ e1000_open(struct net_device *netdev)
/* allocate transmit descriptors */
- if((err = e1000_setup_tx_resources(adapter)))
+ if((err = e1000_setup_tx_resources(adapter, netdev->node)))
goto err_setup_tx;
/* allocate receive descriptors */
- if((err = e1000_setup_rx_resources(adapter)))
+ if((err = e1000_setup_rx_resources(adapter, netdev->node)))
goto err_setup_rx;
if((err = e1000_up(adapter)))
@@ -866,14 +867,14 @@ e1000_check_64k_bound(struct e1000_adapt
**/
int
-e1000_setup_tx_resources(struct e1000_adapter *adapter)
+e1000_setup_tx_resources(struct e1000_adapter *adapter, int node)
{
struct e1000_desc_ring *txdr = &adapter->tx_ring;
struct pci_dev *pdev = adapter->pdev;
int size;
size = sizeof(struct e1000_buffer) * txdr->count;
- txdr->buffer_info = vmalloc(size);
+ txdr->buffer_info = kmalloc_node(size, GFP_KERNEL, node);
if(!txdr->buffer_info) {
DPRINTK(PROBE, ERR,
"Unable to Allocate Memory for the Transmit descriptor ring\n");
@@ -891,7 +892,7 @@ e1000_setup_tx_resources(struct e1000_ad
setup_tx_desc_die:
DPRINTK(PROBE, ERR,
"Unable to Allocate Memory for the Transmit descriptor ring\n");
- vfree(txdr->buffer_info);
+ kfree(txdr->buffer_info);
return -ENOMEM;
}
@@ -1018,14 +1019,14 @@ e1000_configure_tx(struct e1000_adapter
**/
int
-e1000_setup_rx_resources(struct e1000_adapter *adapter)
+e1000_setup_rx_resources(struct e1000_adapter *adapter, int node)
{
struct e1000_desc_ring *rxdr = &adapter->rx_ring;
struct pci_dev *pdev = adapter->pdev;
int size;
size = sizeof(struct e1000_buffer) * rxdr->count;
- rxdr->buffer_info = vmalloc(size);
+ rxdr->buffer_info = kmalloc_node(size, GFP_KERNEL, node);
if(!rxdr->buffer_info) {
DPRINTK(PROBE, ERR,
"Unable to Allocate Memory for the Recieve descriptor ring\n");
@@ -1044,7 +1045,7 @@ e1000_setup_rx_resources(struct e1000_ad
setup_rx_desc_die:
DPRINTK(PROBE, ERR,
"Unble to Allocate Memory for the Recieve descriptor ring\n");
- vfree(rxdr->buffer_info);
+ kfree(rxdr->buffer_info);
return -ENOMEM;
}
@@ -1197,7 +1198,7 @@ e1000_free_tx_resources(struct e1000_ada
e1000_clean_tx_ring(adapter);
- vfree(adapter->tx_ring.buffer_info);
+ kfree(adapter->tx_ring.buffer_info);
adapter->tx_ring.buffer_info = NULL;
pci_free_consistent(pdev, adapter->tx_ring.size,
@@ -1279,7 +1280,7 @@ e1000_free_rx_resources(struct e1000_ada
e1000_clean_rx_ring(adapter);
- vfree(rx_ring->buffer_info);
+ kfree(rx_ring->buffer_info);
rx_ring->buffer_info = NULL;
pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma);
Index: linux-2.6.11/include/linux/netdevice.h
===================================================================
--- linux-2.6.11.orig/include/linux/netdevice.h 2005-05-17 16:44:20.000000000 -0700
+++ linux-2.6.11/include/linux/netdevice.h 2005-05-17 17:03:01.000000000 -0700
@@ -279,6 +279,7 @@ struct net_device
unsigned long mem_start; /* shared mem start */
unsigned long base_addr; /* device I/O address */
unsigned int irq; /* device IRQ number */
+ unsigned int node; /* device node number */
/*
* Some hardware also needs these fields, but they are not
next reply other threads:[~2005-05-18 1:56 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-18 1:56 Christoph Lameter [this message]
2005-05-18 2:03 ` Andrew Morton
2005-05-18 2:52 ` Christoph Lameter
[not found] ` <20050517.195703.104034854.davem@davemloft.net>
2005-05-18 4:27 ` Christoph Lameter
2005-05-18 4:58 ` Andrew Morton
2005-05-18 15:55 ` Ganesh Venkatesan
2005-05-18 20:42 ` Andrew Morton
2005-05-27 21:52 ` [PATCH] e1000: NUMA aware allocation of descriptors V2 Christoph Lameter
2005-05-27 23:25 ` Andrew Morton
2005-05-18 13:19 ` [PATCH] NUMA aware allocation of transmit and receive buffers for e1000 Andi Kleen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.62.0505171854490.20408@graphe.net \
--to=christoph@graphe.net \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®