From: Geert Uytterhoeven <geert@linux-m68k.org>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Kosina <jkosina@suse.cz>, Ingo Molnar <mingo@elte.hu>,
Linux/m68k <linux-m68k@vger.kernel.org>,
Linux Kernel Development <linux-kernel@vger.kernel.org>
Subject: Re: m68k libc5 regression
Date: Sun, 1 Jun 2008 11:56:40 +0200 (CEST) [thread overview]
Message-ID: <Pine.LNX.4.64.0806011155080.5559@anakin> (raw)
In-Reply-To: <20080601014824.528173bb.akpm@linux-foundation.org>
On Sun, 1 Jun 2008, Andrew Morton wrote:
> On Sun, 1 Jun 2008 10:37:59 +0200 (CEST) Geert Uytterhoeven <geert@linux-m68k.org> wrote:
> > > I shall merge this fix into my tree (y'know - the one where memory
> > > management patches are hosted) and I'll get it into 2.6.26 and shall
> > > offer it to the -stable team. This will cause me to get collisions
> > > with the duplicated patch in linux-next but fortunately it is small.
> > > This time.
> >
> > So what's the appropriate way to handle this?
>
> Well at least please reply letting people know what's happening with it.
>
> Ask me to merge it and remind me that it's needed in -stable. Or just
> send the thing to Linus and -stable immediately. Copy me and I'll do
> the usual merge-it-in-case-linus-misses-it trick.
>
> > I should have kept it in the m68k series after NEXT_PATCHES_END, so
> > nobody sees it exists?
>
> That would work, as long as we know that the patch is firmly on the
> mainline and -stable paths.
OK.
As you've been faster than me, I assume you will take care of it now anyway?
Here's an additional one... Can you add this one too?
Thx!
Subject: [PATCH] m68k: enable CONFIG_COMPAT_BRK by default
As some m68k machines have plenty of libc5 binaries in active use, enable
CONFIG_COMPAT_BRK by default.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
arch/m68k/configs/amiga_defconfig | 6 +++---
arch/m68k/configs/apollo_defconfig | 6 +++---
arch/m68k/configs/atari_defconfig | 6 +++---
arch/m68k/configs/bvme6000_defconfig | 6 +++---
arch/m68k/configs/hp300_defconfig | 6 +++---
arch/m68k/configs/mac_defconfig | 6 +++---
arch/m68k/configs/multi_defconfig | 6 +++---
arch/m68k/configs/mvme147_defconfig | 6 +++---
arch/m68k/configs/mvme16x_defconfig | 6 +++---
arch/m68k/configs/q40_defconfig | 6 +++---
arch/m68k/configs/sun3_defconfig | 6 +++---
arch/m68k/configs/sun3x_defconfig | 6 +++---
12 files changed, 36 insertions(+), 36 deletions(-)
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:41 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:42 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:43 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:45 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:46 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:47 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:42:31 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:49 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:50 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:51 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:53 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Sun May 18 14:44:54 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
next prev parent reply other threads:[~2008-06-01 9:56 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-26 20:38 Geert Uytterhoeven
2008-05-26 22:19 ` Jiri Kosina
2008-05-29 11:03 ` Jiri Kosina
2008-05-29 11:28 ` Geert Uytterhoeven
2008-05-29 19:38 ` Geert Uytterhoeven
2008-06-02 10:28 ` Jiri Kosina
2008-06-01 7:53 ` Andrew Morton
2008-06-01 8:37 ` Geert Uytterhoeven
2008-06-01 8:48 ` Andrew Morton
2008-06-01 9:22 ` Sam Ravnborg
2008-06-01 9:41 ` Andrew Morton
2008-06-01 10:34 ` Sam Ravnborg
2008-06-01 9:56 ` Geert Uytterhoeven [this message]
2008-06-01 13:26 ` Diagnosing linux-next (Was: Re: m68k libc5 regression) Stephen Rothwell
2008-06-01 21:04 ` Andrew Morton
2008-06-02 0:39 ` Paul Mackerras
2008-06-02 1:06 ` Andrew Morton
2008-06-02 2:12 ` Paul Mackerras
2008-06-02 5:37 ` Andrew Morton
2008-06-02 5:49 ` Paul Mackerras
2008-06-02 6:22 ` Andrew Morton
2008-06-02 10:27 ` m68k libc5 regression Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.64.0806011155080.5559@anakin \
--to=geert@linux-m68k.org \
--cc=akpm@linux-foundation.org \
--cc=jkosina@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@vger.kernel.org \
--cc=mingo@elte.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®