[2.6 patch] m68k: remove AP1000 code

[2.6 patch] m68k: remove AP1000 code

[Adrian Bunk]

Unless I miss something that's code for a sparc machine even the sparc 
code no longer supports that got copied to m68k when these files were 
copied.

Signed-off-by: Adrian Bunk <bunk@kernel.org>

---

 arch/m68k/sun3/prom/console.c |    4 ----
 arch/m68k/sun3/prom/init.c    |    9 ---------
 arch/m68k/sun3/prom/printf.c  |    5 -----
 include/asm-m68k/oplib.h      |    1 -
 4 files changed, 19 deletions(-)

0bae6d3f656139602f96e0ace2766a40d9da5725 diff --git a/arch/m68k/sun3/prom/console.c b/arch/m68k/sun3/prom/console.c
index 52c1427..cb364e5 100644
--- a/arch/m68k/sun3/prom/console.c
+++ b/arch/m68k/sun3/prom/console.c
@@ -104,8 +104,6 @@ prom_query_input_device()
 				return PROMDEV_ITTYB;
 		}
 		return PROMDEV_I_UNK;
-	case PROM_AP1000:
-		return PROMDEV_I_UNK;
 	};
 }
 #endif
@@ -166,8 +164,6 @@ prom_query_output_device()
 			};
 		}
 		break;
-	case PROM_AP1000:
-		return PROMDEV_I_UNK;
 	};
 	return PROMDEV_O_UNK;
 }
diff --git a/arch/m68k/sun3/prom/init.c b/arch/m68k/sun3/prom/init.c
index 202adfc..3ab1e9d 100644
--- a/arch/m68k/sun3/prom/init.c
+++ b/arch/m68k/sun3/prom/init.c
@@ -31,11 +31,6 @@ extern void prom_ranges_init(void);
 
 void __init prom_init(struct linux_romvec *rp)
 {
-#ifdef CONFIG_AP1000
-	extern struct linux_romvec *ap_prom_init(void);
-	rp = ap_prom_init();
-#endif
-
 	romvec = rp;
 #ifndef CONFIG_SUN3
 	switch(romvec->pv_romvers) {
@@ -53,10 +48,6 @@ void __init prom_init(struct linux_romvec *rp)
 		prom_printf("PROMLIB: Sun IEEE Prom not supported yet\n");
 		prom_halt();
 		break;
-	case 42: /* why not :-) */
-		prom_vers = PROM_AP1000;
-		break;
-
 	default:
 		prom_printf("PROMLIB: Bad PROM version %d\n",
 			    romvec->pv_romvers);
diff --git a/arch/m68k/sun3/prom/printf.c b/arch/m68k/sun3/prom/printf.c
index e7bfde3..f6b44f1 100644
--- a/arch/m68k/sun3/prom/printf.c
+++ b/arch/m68k/sun3/prom/printf.c
@@ -37,10 +37,6 @@ prom_printf(char *fmt, ...)
 
 	bptr = ppbuf;
 
-#ifdef CONFIG_AP1000
-        ap_write(1,bptr,strlen(bptr));
-#else
-
 #ifdef CONFIG_KGDB
 	if (kgdb_initialized) {
 		printk("kgdb_initialized = %d\n", kgdb_initialized);
@@ -54,7 +50,6 @@ prom_printf(char *fmt, ...)
 		prom_putchar(ch);
 	}
 #endif
-#endif
 	va_end(args);
 	return;
 }
diff --git a/include/asm-m68k/oplib.h b/include/asm-m68k/oplib.h
index 06caa2d..275cb3f 100644
--- a/include/asm-m68k/oplib.h
+++ b/include/asm-m68k/oplib.h
@@ -19,7 +19,6 @@ enum prom_major_version {
 	PROM_V2,      /* sun4c and early sun4m V2 prom */
 	PROM_V3,      /* sun4m and later, up to sun4d/sun4e machines V3 */
 	PROM_P1275,   /* IEEE compliant ISA based Sun PROM, only sun4u */
-        PROM_AP1000,  /* actually no prom at all */
 };
 
 extern enum prom_major_version prom_vers;

Re: [2.6 patch] m68k: remove AP1000 code

[Geert Uytterhoeven]

On Thu, 5 Jun 2008, Adrian Bunk wrote:
> Unless I miss something that's code for a sparc machine even the sparc 
> code no longer supports that got copied to m68k when these files were 
> copied.
> 
> Signed-off-by: Adrian Bunk <bunk@kernel.org>

Queued for 2.6.27.

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds