From: jackson.lee <jackson.lee@chipsnmedia.com>
To: jackson.lee <jackson.lee@chipsnmedia.com>,
"mchehab@kernel.org" <mchehab@kernel.org>,
"hverkuil-cisco@xs4all.nl" <hverkuil-cisco@xs4all.nl>,
"nicolas.dufresne@collabora.com" <nicolas.dufresne@collabora.com>,
"bob.beckett@collabora.com" <bob.beckett@collabora.com>
Cc: "linux-media@vger.kernel.org" <linux-media@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
lafley.kim <lafley.kim@chipsnmedia.com>,
"b-brnich@ti.com" <b-brnich@ti.com>,
"hverkuil@xs4all.nl" <hverkuil@xs4all.nl>,
Nas Chung <nas.chung@chipsnmedia.com>
Subject: RE: [PATCH v3 0/4] Performance improvement of decoder
Date: Tue, 12 Aug 2025 07:51:12 +0000 [thread overview]
Message-ID: <SLXP216MB1148D59D42ADEE48A397ABD3ED2BA@SLXP216MB1148.KORP216.PROD.OUTLOOK.COM> (raw)
In-Reply-To: <SLXP216MB11481D85FC52CE16ADA92849ED4FA@SLXP216MB1148.KORP216.PROD.OUTLOOK.COM>
Hi Nicolas
Can you please review these patch series ?
Thanks
> -----Original Message-----
> From: jackson.lee <jackson.lee@chipsnmedia.com>
> Sent: Monday, July 7, 2025 9:37 AM
> To: mchehab@kernel.org; hverkuil-cisco@xs4all.nl;
> nicolas.dufresne@collabora.com; bob.beckett@collabora.com
> Cc: linux-media@vger.kernel.org; linux-kernel@vger.kernel.org; lafley.kim
> <lafley.kim@chipsnmedia.com>; b-brnich@ti.com; hverkuil@xs4all.nl; Nas
> Chung <nas.chung@chipsnmedia.com>
> Subject: RE: [PATCH v3 0/4] Performance improvement of decoder
>
> Hi Nicolas
>
> Can you review these patch series?
>
> These patch series includes the below changes as well.
>
> 1. The explanation for change of Fix Null reference while testing fluster
> 2. Reducing the active loop because of overhead and explanation for change
> of Improve performance decoder 3. Making new patch set in order to check
> EINVAL and add a warn_on around it.
>
> Thanks
> Jackson
>
> > -----Original Message-----
> > From: jackson.lee <jackson.lee@chipsnmedia.com>
> > Sent: Monday, June 23, 2025 9:22 AM
> > To: mchehab@kernel.org; hverkuil-cisco@xs4all.nl;
> > nicolas.dufresne@collabora.com; bob.beckett@collabora.com
> > Cc: linux-media@vger.kernel.org; linux-kernel@vger.kernel.org;
> > jackson.lee <jackson.lee@chipsnmedia.com>; lafley.kim
> > <lafley.kim@chipsnmedia.com>; b- brnich@ti.com; hverkuil@xs4all.nl;
> > Nas Chung <nas.chung@chipsnmedia.com>
> > Subject: [PATCH v3 0/4] Performance improvement of decoder
> >
> > From: Jackson Lee <jackson.lee@chipsnmedia.com>
> >
> > v4l2-compliance results:
> > ========================
> >
> > v4l2-compliance 1.28.1-5233, 64 bits, 64-bit time_t
> >
> > Buffer ioctls:
> > warn: v4l2-test-buffers.cpp(693): VIDIOC_CREATE_BUFS
> > not supported
> > warn: v4l2-test-buffers.cpp(693): VIDIOC_CREATE_BUFS
> > not supported
> > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> > test CREATE_BUFS maximum buffers: OK
> > test VIDIOC_EXPBUF: OK
> > test Requests: OK (Not Supported)
> >
> > Total for wave5-dec device /dev/video0: 46, Succeeded: 46, Failed: 0,
> > Warnings: 2 Total for wave5-enc device /dev/video1: 46, Succeeded: 46,
> > Failed: 0, Warnings: 0
> >
> > Fluster test results:
> > =====================
> >
> > Running test suite JCT-VC-HEVC_V1 with decoder
> > GStreamer-H.265-V4L2-Gst1.0 Using 3 parallel job(s)
> > Ran 133/147 tests successfully in 40.114 secs
> >
> > (1 test fails because of not supporting to parse multi frames, 1 test
> > fails because of a missing frame and slight corruption,
> > 2 tests fail because of sizes which are incompatible with the IP, 11
> > tests fail because of unsupported 10 bit format)
> >
> >
> > Running test suite JVT-AVC_V1 with decoder GStreamer-H.264-V4L2-Gst1.0
> > Using 3 parallel job(s)
> > Ran 78/135 tests successfully in 43.364 secs
> >
> > (57 fail because the hardware is unable to decode MBAFF / FMO / Field
> > / Extended profile streams.)
> >
> > Running test suite JVT-FR-EXT with decoder GStreamer-H.264-V4L2-Gst1.0
> > Using 3 parallel job(s)
> > Ran 25/69 tests successfully in 40.411 secs
> >
> > (44 fail because the hardware does not support field encoded and 422
> > encoded stream)
> >
> > Seek test
> > =====================
> > 1. gst-play-1.0 seek.264
> > 2. this will use waylandsink since gst-play-1.0 uses playbin.
> > if you don't want to hook up display,
> > you can run gst-play-1.0 seek.264 --videosink=fakevideosink instead 3.
> > Let pipeline run for 2-3 seconds 4. press SPACE key to pause 5. press
> > 0 to reset press SPACE to start again
> >
> > gst-play-1.0 seek.264 --videosink=fakevideosink Press 'k' to see a
> > list of keyboard shortcuts.
> > Now playing /root/seek.264
> > Redistribute latency...
> > Redistribute latency...
> > Redistribute latency...
> > Redistribute latency...
> > Redistribute latency...aused
> > 0:00:09.9 / 0:00:09.7
> > Reached end of play list.
> >
> > Sequence Change test
> > =====================
> > gst-launch-1.0 filesrc location=./drc.h264 ! h264parse ! v4l2h264dec !
> > filesink location=./h264_output_420.yuv Setting pipeline to PAUSED ...
> > Pipeline is PREROLLING ...
> > Redistribute latency...
> > Pipeline is PREROLLED ...
> > Setting pipeline to PLAYING ...
> > New clock: GstSystemClock
> > Redistribute latency...
> > Got EOS from element "pipeline0".
> > Execution ended after 0:00:00.113620590 Setting pipeline to NULL ...
> > Freeing pipeline ...
> >
> > Change since v2:
> > ==================
> > * For [PATCH v3 4/4] media: chips-media: wave5: Improve performance of
> > decoder
> > - squash v2's #3~#6 to #4 patch of v3
> >
> > Change since v1:
> > ===================
> > * For [PATCH v2 2/7] media: chips-media: wave5: Improve performance of
> > decoder
> > - change log to dbg level
> >
> > Change since v0:
> > ===================
> > * For [PATCH v1 2/7] media: chips-media: wave5: Improve performance of
> > decoder
> > - separates the previous patch to a few patches
> >
> > * For [PATCH v1 3/7] media: chips-media: wave5: Fix not to be closed
> > - separated from the previous patch of performance improvement of
> > decoder
> >
> > * For [PATCH v1 4/7] media: chips-media: wave5: Use spinlock whenever
> > state is changed
> > - separated from the previous patch of performance improvement of
> > decoder
> >
> > * For [PATCH v1 5/7] media: chips-media: wave5: Fix not to free
> > resources normally when
> > instance was destroyed
> > - separated from the previous patch of performance improvement of
> > decoder
> >
> > * For [PATCH v1 7/7] media: chips-media: wave5: Fix SError of kernel
> > panic when closed
> > - separated from the previous patch of performance improvement of
> > decoder
> >
> >
> > Jackson Lee (4):
> > media: chips-media: wave5: Fix SError of kernel panic when closed
> > media: chips-media: wave5: Fix Null reference while testing fluster
> > media: chips-media: wave5: Add WARN_ON to check if dec_output_info is
> > NULL
> > media: chips-media: wave5: Improve performance of decoder
> >
> > .../platform/chips-media/wave5/wave5-helper.c | 23 ++-
> > .../platform/chips-media/wave5/wave5-hw.c | 2 +-
> > .../chips-media/wave5/wave5-vpu-dec.c | 139 ++++++++++++------
> > .../chips-media/wave5/wave5-vpu-enc.c | 8 +-
> > .../platform/chips-media/wave5/wave5-vpu.c | 71 +++++++--
> > .../platform/chips-media/wave5/wave5-vpuapi.c | 37 ++---
> > .../platform/chips-media/wave5/wave5-vpuapi.h | 11 ++
> > .../chips-media/wave5/wave5-vpuconfig.h | 1 +
> > 8 files changed, 219 insertions(+), 73 deletions(-)
> >
> > --
> > 2.43.0
>
next prev parent reply other threads:[~2025-08-12 7:51 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-23 0:21 Jackson.lee
2025-06-23 0:21 ` [PATCH v3 1/4] media: chips-media: wave5: Fix SError of kernel panic when closed Jackson.lee
2025-08-29 18:03 ` Nicolas Dufresne
2025-06-23 0:21 ` [PATCH v3 2/4] media: chips-media: wave5: Fix Null reference while testing fluster Jackson.lee
2025-08-29 18:13 ` Nicolas Dufresne
2025-09-09 3:43 ` jackson.lee
2025-06-23 0:21 ` [PATCH v3 3/4] media: chips-media: wave5: Add WARN_ON to check if dec_output_info is NULL Jackson.lee
2025-08-29 18:15 ` Nicolas Dufresne
2025-09-09 3:45 ` jackson.lee
2025-06-23 0:21 ` [PATCH v3 4/4] media: chips-media: wave5: Improve performance of decoder Jackson.lee
2025-08-29 18:01 ` Nicolas Dufresne
2025-09-09 1:42 ` jackson.lee
2025-09-16 11:21 ` Markus Elfring
2025-07-07 0:37 ` [PATCH v3 0/4] Performance improvement " jackson.lee
2025-08-12 7:51 ` jackson.lee [this message]
2025-08-29 15:40 ` Nicolas Dufresne
2025-09-09 6:16 ` jackson.lee
2025-09-09 21:33 ` Nicolas Dufresne
2025-09-10 6:59 ` jackson.lee
2025-09-10 12:56 ` Nicolas Dufresne
2025-09-11 2:04 ` jackson.lee
2025-09-11 12:23 ` Nicolas Dufresne
2025-09-11 4:40 ` jackson.lee
2025-09-15 7:33 ` jackson.lee
2025-09-15 20:14 ` Nicolas Dufresne
2025-09-16 0:40 ` jackson.lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=SLXP216MB1148D59D42ADEE48A397ABD3ED2BA@SLXP216MB1148.KORP216.PROD.OUTLOOK.COM \
--to=jackson.lee@chipsnmedia.com \
--cc=b-brnich@ti.com \
--cc=bob.beckett@collabora.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=hverkuil@xs4all.nl \
--cc=lafley.kim@chipsnmedia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=nas.chung@chipsnmedia.com \
--cc=nicolas.dufresne@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®