* fifo behaviour is broken in 2.4.4
@ 2001-05-24 8:15 dean
2001-05-25 8:29 ` christophe barbé
0 siblings, 1 reply; 2+ messages in thread
From: dean @ 2001-05-24 8:15 UTC (permalink / raw)
To: linux-kernel
[1.] fifo behaviour is broken in 2.4.4
[2.] fifo are being flushed. Sending characters to a fifo, select(2) returns
'ready to read' on the fifo, but attempting to determine the number of
characters in fifo returns zero.
[3.] mkfifo select flush kernel fs
[4.] Linux version 2.4.4 (root@devl) (gcc version 2.95.2 19991024 (release)) #1 Sat Apr 28 21:15:56 BST 2001
[5.] Not Ooops.
[6.]
In first session:
mkfifo /tmp/myfifo
while (sleep 2)
do
echo fred > /tmp/myfifo
done
In second session:
tail -f /tmp/myfifo
Expect 2nd session to display 'fred' every 2 seconds.
Results I am getting, in 2.4.4, just one 'fred'.
[
Test of expectations:
Linux 2.4.3 as expected (albeit with 'file trucation' warnings)
Solaris 2.6: as expected
]
[7.] Any shell
[7.1] ver_linux
Linux devl 2.4.4 #1 Sat Apr 28 21:15:56 BST 2001 i686 unknown
Gnu C 2.95.2
Gnu make 3.79.1
binutils 2.9.5.0.24
util-linux 2.10q
mount 2.10q
modutils 2.4.1
e2fsprogs 1.19
pcmcia-cs 3.1.17
PPP 2.3.11
isdn4k-utils 3.1pre1a
Linux C Library x 1 root root 1382179 Jan 19 06:14 /lib/libc.so.6
Dynamic linker (ldd) 2.2
Procps 2.0.6
Net-tools 1.57
Kbd 0.99
Sh-utils 2.0
Modules Loaded
[7.2] /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 6
model name : Celeron (Mendocino)
stepping : 10
cpu MHz : 466.678
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr
bogomips : 930.61
[7.3] /proc/modules
[7.4] /proc/ioports, /proc/iomem
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
1000-103f : Intel Corporation 82371AB PIIX4 ACPI
1040-105f : Intel Corporation 82371AB PIIX4 ACPI
1060-107f : Intel Corporation 82371AB PIIX4 USB
1080-108f : Intel Corporation 82371AB PIIX4 IDE
1080-1087 : ide0
1088-108f : ide1
1400-14ff : ESS Technology ES1978 Maestro 2E
1400-14ff : ESS Maestro 2E
1800-18ff : PCI CardBus #02
1800-187f : PCI device 115d:0003
1800-187f : xircom_tulip_cb
1880-1887 : PCI device 115d:0103
1c00-1cff : PCI CardBus #02
2000-2fff : PCI Bus #01
2000-20ff : ATI Technologies Inc 3D Rage P/M Mobility AGP 2x
3000-30ff : PCI CardBus #06
3400-34ff : PCI CardBus #06
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-13feffff : System RAM
00100000-002090ad : Kernel code
002090ae-0026a98b : Kernel data
13ff0000-13fffbff : ACPI Tables
13fffc00-13ffffff : ACPI Non-volatile Storage
14000000-14000fff : Texas Instruments PCI1225
14001000-14001fff : Texas Instruments PCI1225 (#2)
14400000-147fffff : PCI CardBus #02
14400000-14403fff : PCI device 115d:0003
14404000-14407fff : PCI device 115d:0103
14800000-14bfffff : PCI CardBus #02
14800000-148007ff : PCI device 115d:0003
14800800-14800fff : PCI device 115d:0003
14801000-148017ff : PCI device 115d:0103
14801800-14801fff : PCI device 115d:0103
14c00000-14ffffff : PCI CardBus #06
15000000-153fffff : PCI CardBus #06
e0000000-e3ffffff : Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
fc000000-fdffffff : PCI Bus #01
fc000000-fc000fff : ATI Technologies Inc 3D Rage P/M Mobility AGP 2x
fd000000-fdffffff : ATI Technologies Inc 3D Rage P/M Mobility AGP 2x
fff80000-ffffffff : reserved
[7.5] lspci -vvv
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 64
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fc000000-fdffffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+
00:04.0 CardBus bridge: Texas Instruments PCI1225 (rev 01)
Subsystem: Dell Computer Corporation: Unknown device 009e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 14000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=02, sec-latency=176
Memory window 0: 14400000-147ff000 (prefetchable)
Memory window 1: 14800000-14bff000
I/O window 0: 00001800-000018ff
I/O window 1: 00001c00-00001cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
00:04.1 CardBus bridge: Texas Instruments PCI1225 (rev 01)
Subsystem: Dell Computer Corporation: Unknown device 009e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 14001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=06, sec-latency=176
Memory window 0: 14c00000-14fff000 (prefetchable)
Memory window 1: 15000000-153ff000
I/O window 0: 00003000-000030ff
I/O window 1: 00003400-000034ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00:07.0 Bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at 1080 [size=16]
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at 1060 [size=32]
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 03)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:08.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev 10)
Subsystem: Dell Computer Corporation: Unknown device 009e
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 1400 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D2 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage P/M Mobility AGP 2x (rev 64) (prog-if 00 [VGA])
Subsystem: Dell Computer Corporation: Unknown device 009e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at fc000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [50] AGP version 1.0
Status: RQ=255 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [5c] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:00.0 Ethernet controller: Xircom Cardbus Ethernet 10/100 (rev 03)
Subsystem: Xircom Cardbus Ethernet 10/100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (5000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 1800 [size=128]
Region 1: Memory at 14800000 (32-bit, non-prefetchable) [size=2K]
Region 2: Memory at 14800800 (32-bit, non-prefetchable) [size=2K]
Expansion ROM at 14400000 [size=16K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
02:00.1 Serial controller: Xircom Cardbus Ethernet + 56k Modem (rev 03) (prog-if 02 [16550])
Subsystem: Xircom CBEM56G-100 Ethernet + 56k Modem
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 1880 [size=8]
Region 1: Memory at 14801000 (32-bit, non-prefetchable) [size=2K]
Region 2: Memory at 14801800 (32-bit, non-prefetchable) [size=2K]
Expansion ROM at 14404000 [size=16K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
[7.6] /proc/scsi/scsi NA
[7.7] -
[8.] Method in [6.] tested on 2.4.3 and Solaris 2.6 both work as expected.
Cheers,
Dean.
--
Dean.A.Darlison dean@dasco.ltd.uk
Dasco Ltd. http://www.dasco.ltd.uk/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: fifo behaviour is broken in 2.4.4
2001-05-24 8:15 fifo behaviour is broken in 2.4.4 dean
@ 2001-05-25 8:29 ` christophe barbé
0 siblings, 0 replies; 2+ messages in thread
From: christophe barbé @ 2001-05-25 8:29 UTC (permalink / raw)
To: dean; +Cc: linux-kernel
I'm seeing the same thing on a vanillia 2.4.4 kernel.
It works on 2.2.18.
Christophe
On Thu, 24 May 2001 10:15:02 dean@dasco.ltd.uk wrote:
>
> [1.] fifo behaviour is broken in 2.4.4
>
> [2.] fifo are being flushed. Sending characters to a fifo, select(2)
> returns
> 'ready to read' on the fifo, but attempting to determine the number of
> characters in fifo returns zero.
>
> [3.] mkfifo select flush kernel fs
>
> [4.] Linux version 2.4.4 (root@devl) (gcc version 2.95.2 19991024
> (release)) #1 Sat Apr 28 21:15:56 BST 2001
>
> [5.] Not Ooops.
>
> [6.]
>
> In first session:
>
> mkfifo /tmp/myfifo
> while (sleep 2)
> do
> echo fred > /tmp/myfifo
> done
>
>
> In second session:
>
> tail -f /tmp/myfifo
>
>
>
> Expect 2nd session to display 'fred' every 2 seconds.
> Results I am getting, in 2.4.4, just one 'fred'.
>
> [
> Test of expectations:
> Linux 2.4.3 as expected (albeit with 'file trucation' warnings)
> Solaris 2.6: as expected
> ]
>
> [7.] Any shell
>
> [7.1] ver_linux
>
> Linux devl 2.4.4 #1 Sat Apr 28 21:15:56 BST 2001 i686 unknown
> Gnu C 2.95.2
> Gnu make 3.79.1
> binutils 2.9.5.0.24
> util-linux 2.10q
> mount 2.10q
> modutils 2.4.1
> e2fsprogs 1.19
> pcmcia-cs 3.1.17
> PPP 2.3.11
> isdn4k-utils 3.1pre1a
> Linux C Library x 1 root root 1382179 Jan 19 06:14
> /lib/libc.so.6
> Dynamic linker (ldd) 2.2
> Procps 2.0.6
> Net-tools 1.57
> Kbd 0.99
> Sh-utils 2.0
> Modules Loaded
>
> [7.2] /proc/cpuinfo
>
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 6
> model : 6
> model name : Celeron (Mendocino)
> stepping : 10
> cpu MHz : 466.678
> cache size : 128 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca
> cmov pat pse36 mmx fxsr
> bogomips : 930.61
>
> [7.3] /proc/modules
>
> [7.4] /proc/ioports, /proc/iomem
>
> 0000-001f : dma1
> 0020-003f : pic1
> 0040-005f : timer
> 0060-006f : keyboard
> 0080-008f : dma page reg
> 00a0-00bf : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0170-0177 : ide1
> 01f0-01f7 : ide0
> 0376-0376 : ide1
> 03c0-03df : vga+
> 03f6-03f6 : ide0
> 03f8-03ff : serial(auto)
> 0cf8-0cff : PCI conf1
> 1000-103f : Intel Corporation 82371AB PIIX4 ACPI
> 1040-105f : Intel Corporation 82371AB PIIX4 ACPI
> 1060-107f : Intel Corporation 82371AB PIIX4 USB
> 1080-108f : Intel Corporation 82371AB PIIX4 IDE
> 1080-1087 : ide0
> 1088-108f : ide1
> 1400-14ff : ESS Technology ES1978 Maestro 2E
> 1400-14ff : ESS Maestro 2E
> 1800-18ff : PCI CardBus #02
> 1800-187f : PCI device 115d:0003
> 1800-187f : xircom_tulip_cb
> 1880-1887 : PCI device 115d:0103
> 1c00-1cff : PCI CardBus #02
> 2000-2fff : PCI Bus #01
> 2000-20ff : ATI Technologies Inc 3D Rage P/M Mobility AGP 2x
> 3000-30ff : PCI CardBus #06
> 3400-34ff : PCI CardBus #06
>
>
>
> 00000000-0009f7ff : System RAM
> 0009f800-0009ffff : reserved
> 000a0000-000bffff : Video RAM area
> 000c0000-000c7fff : Video ROM
> 000f0000-000fffff : System ROM
> 00100000-13feffff : System RAM
> 00100000-002090ad : Kernel code
> 002090ae-0026a98b : Kernel data
> 13ff0000-13fffbff : ACPI Tables
> 13fffc00-13ffffff : ACPI Non-volatile Storage
> 14000000-14000fff : Texas Instruments PCI1225
> 14001000-14001fff : Texas Instruments PCI1225 (#2)
> 14400000-147fffff : PCI CardBus #02
> 14400000-14403fff : PCI device 115d:0003
> 14404000-14407fff : PCI device 115d:0103
> 14800000-14bfffff : PCI CardBus #02
> 14800000-148007ff : PCI device 115d:0003
> 14800800-14800fff : PCI device 115d:0003
> 14801000-148017ff : PCI device 115d:0103
> 14801800-14801fff : PCI device 115d:0103
> 14c00000-14ffffff : PCI CardBus #06
> 15000000-153fffff : PCI CardBus #06
> e0000000-e3ffffff : Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
> fc000000-fdffffff : PCI Bus #01
> fc000000-fc000fff : ATI Technologies Inc 3D Rage P/M Mobility AGP 2x
> fd000000-fdffffff : ATI Technologies Inc 3D Rage P/M Mobility AGP 2x
> fff80000-ffffffff : reserved
>
>
> [7.5] lspci -vvv
>
> 00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
> (rev 03)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR+
> Latency: 64
> Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
> Capabilities: [a0] AGP version 1.0
> Status: RQ=31 SBA+ 64bit- FW- Rate=x2
> Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
>
> 00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge
> (rev 03) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 128
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
> I/O behind bridge: 00002000-00002fff
> Memory behind bridge: fc000000-fdffffff
> Prefetchable memory behind bridge: fff00000-000fffff
> BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+
>
> 00:04.0 CardBus bridge: Texas Instruments PCI1225 (rev 01)
> Subsystem: Dell Computer Corporation: Unknown device 009e
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 168, cache line size 08
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at 14000000 (32-bit, non-prefetchable) [size=4K]
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=176
> Memory window 0: 14400000-147ff000 (prefetchable)
> Memory window 1: 14800000-14bff000
> I/O window 0: 00001800-000018ff
> I/O window 1: 00001c00-00001cff
> BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt-
> PostWrite+
> 16-bit legacy interface ports at 0001
>
> 00:04.1 CardBus bridge: Texas Instruments PCI1225 (rev 01)
> Subsystem: Dell Computer Corporation: Unknown device 009e
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 168, cache line size 08
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at 14001000 (32-bit, non-prefetchable) [size=4K]
> Bus: primary=00, secondary=06, subordinate=06, sec-latency=176
> Memory window 0: 14c00000-14fff000 (prefetchable)
> Memory window 1: 15000000-153ff000
> I/O window 0: 00003000-000030ff
> I/O window 1: 00003400-000034ff
> BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+
> PostWrite+
> 16-bit legacy interface ports at 0001
>
> 00:07.0 Bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
>
> 00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
> (prog-if 80 [Master])
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Region 4: I/O ports at 1080 [size=16]
>
> 00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
> (prog-if 00 [UHCI])
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin D routed to IRQ 5
> Region 4: I/O ports at 1060 [size=32]
>
> 00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 03)
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin ? routed to IRQ 9
>
> 00:08.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E
> (rev 10)
> Subsystem: Dell Computer Corporation: Unknown device 009e
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (500ns min, 6000ns max)
> Interrupt: pin A routed to IRQ 5
> Region 0: I/O ports at 1400 [size=256]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1+,D2+,D3hot+,D3cold-)
> Status: D2 PME-Enable- DSel=0 DScale=0 PME-
>
> 01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage P/M
> Mobility AGP 2x (rev 64) (prog-if 00 [VGA])
> Subsystem: Dell Computer Corporation: Unknown device 009e
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping+ SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 66 (2000ns min), cache line size 08
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at fd000000 (32-bit, non-prefetchable)
> [size=16M]
> Region 1: I/O ports at 2000 [size=256]
> Region 2: Memory at fc000000 (32-bit, non-prefetchable) [size=4K]
> Expansion ROM at <unassigned> [disabled] [size=128K]
> Capabilities: [50] AGP version 1.0
> Status: RQ=255 SBA+ 64bit- FW- Rate=x1,x2
> Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
> Capabilities: [5c] Power Management version 1
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 02:00.0 Ethernet controller: Xircom Cardbus Ethernet 10/100 (rev 03)
> Subsystem: Xircom Cardbus Ethernet 10/100
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (5000ns min, 10000ns max)
> Interrupt: pin A routed to IRQ 11
> Region 0: I/O ports at 1800 [size=128]
> Region 1: Memory at 14800000 (32-bit, non-prefetchable) [size=2K]
> Region 2: Memory at 14800800 (32-bit, non-prefetchable) [size=2K]
> Expansion ROM at 14400000 [size=16K]
> Capabilities: [dc] Power Management version 1
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
> 02:00.1 Serial controller: Xircom Cardbus Ethernet + 56k Modem (rev 03)
> (prog-if 02 [16550])
> Subsystem: Xircom CBEM56G-100 Ethernet + 56k Modem
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin A routed to IRQ 11
> Region 0: I/O ports at 1880 [size=8]
> Region 1: Memory at 14801000 (32-bit, non-prefetchable) [size=2K]
> Region 2: Memory at 14801800 (32-bit, non-prefetchable) [size=2K]
> Expansion ROM at 14404000 [size=16K]
> Capabilities: [dc] Power Management version 1
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
>
>
> [7.6] /proc/scsi/scsi NA
>
> [7.7] -
>
>
> [8.] Method in [6.] tested on 2.4.3 and Solaris 2.6 both work as
> expected.
>
>
> Cheers,
> Dean.
>
> --
> Dean.A.Darlison
> dean@dasco.ltd.uk
> Dasco Ltd.
> http://www.dasco.ltd.uk/
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel"
> in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
Christophe Barbé
Software Engineer - christophe.barbe@lineo.fr
Lineo France - Lineo High Availability Group
42-46, rue Médéric - 92110 Clichy - France
phone (33).1.41.40.02.12 - fax (33).1.41.40.02.01
http://www.lineo.com
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2001-05-25 8:30 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-05-24 8:15 fifo behaviour is broken in 2.4.4 dean
2001-05-25 8:29 ` christophe barbé
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®