* panther ethernet and SCSI
@ 2000-10-29 0:08 Andries.Brouwer
0 siblings, 0 replies; only message in thread
From: Andries.Brouwer @ 2000-10-29 0:08 UTC (permalink / raw)
To: linux-kernel; +Cc: linux-scsi
Recently I got a "Professional Workstation" - a 486DX33
with 82596 on board ethernet and NCR(?) on board SCSI.
It was not very difficult to get the 82596 to work
(I put something that works on
ftp.XX.kernel.org/pub/linux/kernel/people/aeb/lp486e.c
comments are welcome)
The 82596 itself is well-documented in Intel's 29021806.pdf
but I have almost no information on the use of the I/O ports
and do not know a good way to find the ethernet address.
But there is also SCSI on this board - at boot time it prints
Ballard Synergy CAMcore(R), Copyright 1991, 1.602
LP486E NCR SDMS
if and only if SCSI is enabled in the BIOS setup.
Does anybody have an idea how to make this do something?
Andries
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2000-10-29 0:08 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2000-10-29 0:08 panther ethernet and SCSI Andries.Brouwer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®