2.6.27-rc7-git5: Reported regressions from 2.6.26

2.6.27-rc7-git5: Reported regressions from 2.6.26

[Rafael J. Wysocki]

This message contains a list of some regressions from 2.6.26, for which there
are no fixes in the mainline I know of.  If any of them have been fixed already,
please let me know.

If you know of any other unresolved regressions from 2.6.26, please let me know
either and I'll add them to the list.  Also, please let me know if any of the
entries below are invalid.

Each entry from the list will be sent additionally in an automatic reply to
this message with CCs to the people involved in reporting and handling the
issue.


Listed regressions statistics:

  Date          Total  Pending  Unresolved
  ----------------------------------------
  2008-09-27      173       35          28


Unresolved regressions
----------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11643
Subject		: ALSA sound/core/pcm_native.c:1947: BUG? (err >= 0)
Submitter	: sangu <sangu.gnome@gmail.com>
Date		: 2008-09-24 16:51 (4 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11634
Subject		: Sometime my laptop is dead on resume from ram
Submitter	: Romano Giannetti <romano.giannetti@gmail.com>
Date		: 2008-09-24 01:12 (4 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11615
Subject		: sata_nv EH problems
Submitter	: Pär Andersson <paran@lysator.liu.se>
Date		: 2008-09-21 18:09 (7 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11608
Subject		: 2.6.27-rc6 BUG: unable to handle kernel paging request
Submitter	: John Daiker <daikerjohn@gmail.com>
Date		: 2008-09-16 23:00 (12 days old)
References	: http://marc.info/?l=linux-kernel&m=122160611517267&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11607
Subject		: 2.6.27-rc6  Bug in tty_chars_in_buffer
Submitter	: John Daiker <daikerjohn@gmail.com>
Date		: 2008-09-15 2:26 (13 days old)
References	: http://marc.info/?l=linux-kernel&m=122144565514490&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11569
Subject		: Don't complain about disabled irqs when the system has paniced
Submitter	: Andi Kleen <andi@firstfloor.org>
Date		: 2008-09-02 13:49 (26 days old)
References	: http://marc.info/?l=linux-kernel&m=122036356127282&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11568
Subject		: spontaneous reboot on resume with 2.6.27
Submitter	: Andy Wettstein <ajw1980@gmail.com>
Date		: 2008-09-14 20:00 (14 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11543
Subject		: kernel panic: softlockup in tick_periodic() ???
Submitter	: Joshua Hoblitt <j_kernel@hoblitt.com>
Date		: 2008-09-11 16:46 (17 days old)
References	: http://marc.info/?l=linux-kernel&m=122117786124326&w=4
Handled-By	: Thomas Gleixner <tglx@linutronix.de>
		  Cyrill Gorcunov <gorcunov@gmail.com>
		  Ingo Molnar <mingo@elte.hu>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11516
Subject		: severe performance degradation on x86_64 going from 2.6.26-rc9 -&gt; 2.6.27-rc5
Submitter	: Jason Vas Dias <jason.vas.dias@gmail.com>
Date		: 2008-09-07 13:59 (21 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11512
Subject		: sort-of regression due to "kconfig: speed up all*config + randconfig"
Submitter	: Alexey Dobriyan <adobriyan@gmail.com>
Date		: 2008-09-05 22:50 (23 days old)
References	: http://marc.info/?l=linux-kernel&m=122065498013858&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11506
Subject		: oops during unmount - ext3? (2.6.27-rc5)
Submitter	: Marcin Slusarz <marcin.slusarz@gmail.com>
Date		: 2008-09-04 19:14 (24 days old)
References	: http://marc.info/?l=linux-kernel&m=122055573123449&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11504
Subject		: reiserfs  BUG in 2.6.27-rc5
Submitter	: Randy Dunlap <randy.dunlap@oracle.com>
Date		: 2008-09-03 16:35 (25 days old)
References	: http://marc.info/?l=linux-kernel&m=122045982120138&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11476
Subject		: failure to associate after resume from suspend to ram
Submitter	: Michael S. Tsirkin <m.s.tsirkin@gmail.com>
Date		: 2008-09-01 13:33 (27 days old)
References	: http://marc.info/?l=linux-kernel&m=122028529415108&w=4
Handled-By	: Zhu Yi <yi.zhu@intel.com>
		  Dan Williams <dcbw@redhat.com>
		  Jouni Malinen <j@w1.fi>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11407
Subject		: suspend: unable to handle kernel paging request
Submitter	: Vegard Nossum <vegard.nossum@gmail.com>
Date		: 2008-08-21 17:28 (38 days old)
References	: http://marc.info/?l=linux-kernel&m=121933974928881&w=4
Handled-By	: Rafael J. Wysocki <rjw@sisk.pl>
		  Pekka Enberg <penberg@cs.helsinki.fi>
		  Pavel Machek <pavel@suse.cz>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11404
Subject		: BUG: in 2.6.23-rc3-git7 in do_cciss_intr
Submitter	: rdunlap <randy.dunlap@oracle.com>
Date		: 2008-08-21 5:52 (38 days old)
References	: http://marc.info/?l=linux-kernel&m=121929819616273&w=4
		  http://marc.info/?l=linux-kernel&m=121932889105368&w=4
Handled-By	: Miller, Mike (OS Dev) <Mike.Miller@hp.com>
		  James Bottomley <James.Bottomley@hansenpartnership.com>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11382
Subject		: e1000e: 2.6.27-rc1 corrupts EEPROM/NVM
Submitter	: David Vrabel <david.vrabel@csr.com>
Date		: 2008-08-08 10:47 (51 days old)
References	: http://marc.info/?l=linux-kernel&m=121819267211679&w=4
Handled-By	: Christopher Li <chrisl@vmware.com>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11380
Subject		: lockdep warning: cpu_add_remove_lock at:cpu_maps_update_begin+0x14/0x16
Submitter	: Ingo Molnar <mingo@elte.hu>
Date		: 2008-08-20 6:44 (39 days old)
References	: http://marc.info/?l=linux-kernel&m=121921480931970&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11340
Subject		: LTP overnight run resulted in unusable box
Submitter	: Alexey Dobriyan <adobriyan@gmail.com>
Date		: 2008-08-13 9:24 (46 days old)
References	: http://marc.info/?l=linux-kernel&m=121861951902949&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11308
Subject		: tbench regression on each kernel release from 2.6.22 -&gt; 2.6.28
Submitter	: Christoph Lameter <cl@linux-foundation.org>
Date		: 2008-08-11 18:36 (48 days old)
References	: http://marc.info/?l=linux-kernel&m=121847986119495&w=4
		  http://marc.info/?l=linux-kernel&m=122125737421332&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11272
Subject		: BUG: parport_serial in 2.6.27-rc1 for NetMos Technology PCI 9835
Submitter	: Jaswinder Singh <jaswinderlinux@gmail.com>
Date		: 2008-08-05 15:12 (54 days old)
References	: http://marc.info/?l=linux-kernel&m=121794900319776&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11271
Subject		: BUG: fealnx in 2.6.27-rc1
Submitter	: Jaswinder Singh <jaswinderlinux@gmail.com>
Date		: 2008-08-05 14:58 (54 days old)
References	: http://marc.info/?l=linux-netdev&m=121794762016830&w=4
		  http://lkml.org/lkml/2008/8/10/98
Handled-By	: Francois Romieu <romieu@fr.zoreil.com>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11264
Subject		: Invalid op opcode in kernel/workqueue
Submitter	: Jean-Luc Coulon <jean.luc.coulon@gmail.com>
Date		: 2008-08-07 04:18 (52 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11230
Subject		: Kconfig no longer outputs a .config with freshly updated defconfigs
Submitter	: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Date		: 2008-08-02 16:03 (57 days old)
References	: http://marc.info/?l=linux-kernel&m=121769306319391&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11224
Subject		: Only three cores found on quad-core machine.
Submitter	: Dave Jones <davej@redhat.com>
Date		: 2008-08-01 18:15 (58 days old)
References	: http://marc.info/?l=linux-kernel&m=121761475224719&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11220
Subject		: Screen stays black after resume
Submitter	: Nico Schottelius <nico@schottelius.org>
Date		: 2008-07-31 21:05 (59 days old)
References	: http://marc.info/?l=linux-kernel&m=121753882422899&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11215
Subject		: INFO: possible recursive locking detected ps2_command
Submitter	: Zdenek Kabelac <zdenek.kabelac@gmail.com>
Date		: 2008-07-31 9:41 (59 days old)
References	: http://marc.info/?l=linux-kernel&m=121749737011637&w=4
Handled-By	: Peter Zijlstra <a.p.zijlstra@chello.nl>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11210
Subject		: libata badness
Submitter	: Kumar Gala <galak@kernel.crashing.org>
Date		: 2008-07-31 18:53 (59 days old)
References	: http://marc.info/?l=linux-ide&m=121753059307310&w=4
Handled-By	: Kumar Gala <galak@kernel.crashing.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11207
Subject		: VolanoMark regression with 2.6.27-rc1
Submitter	: Zhang, Yanmin <yanmin_zhang@linux.intel.com>
Date		: 2008-07-31 3:20 (59 days old)
References	: http://marc.info/?l=linux-kernel&m=121747464114335&w=4
Handled-By	: Zhang, Yanmin <yanmin_zhang@linux.intel.com>
		  Peter Zijlstra <a.p.zijlstra@chello.nl>
		  Dhaval Giani <dhaval@linux.vnet.ibm.com>
		  Miao Xie <miaox@cn.fujitsu.com>


Regressions with patches
------------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11654
Subject		: Devices enabled in /proc/acpi/wakeup do not wake up any more
Submitter	: Tino Keitel <tino.keitel@gmx.de>
Date		: 2008-09-22 20:29 (6 days old)
References	: http://marc.info/?l=linux-kernel&m=122211535021493&w=4
		  http://marc.info/?l=linux-kernel&m=122224359222164&w=4
Handled-By	: Rafael J. Wysocki <rjw@sisk.pl>
Patch		: http://marc.info/?l=linux-kernel&m=122238185304167&w=4
		  http://marc.info/?l=linux-kernel&m=122237497811138&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11629
Subject		: quad G5 fails to shut down
Submitter	: Johannes Berg <johannes@sipsolutions.net>
Date		: 2008-09-23 14:20 (5 days old)
Handled-By	: Johannes Berg <johannes@sipsolutions.net>
Patch		: http://bugzilla.kernel.org/show_bug.cgi?id=11629#c8


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11550
Subject		: pnp: Huge number of "io resource overlap" messages
Submitter	: Frans Pop <elendil@planet.nl>
Date		: 2008-09-09 10:50 (19 days old)
References	: http://marc.info/?l=linux-kernel&m=122095745403793&w=4
Handled-By	: Rene Herman <rene.herman@keyaccess.nl>
		  Bjorn Helgaas <bjorn.helgaas@hp.com>
Patch		: http://marc.info/?l=linux-kernel&m=122246533505643&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11549
Subject		: 2.6.27-rc5 acpi: EC Storm error message on bootup
Submitter	: <jmerkey@wolfmountaingroup.com>
Date		: 2008-09-02 21:27 (26 days old)
References	: http://marc.info/?l=linux-kernel&m=122039255517586&w=4
Handled-By	: Alexey Starikovskiy <astarikovskiy@suse.de>
Patch		: http://bugzilla.kernel.org/attachment.cgi?id=18047&action=view


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11505
Subject		: oltp ~10% regression with 2.6.27-rc5 on stoakley machine
Submitter	: Lin Ming <ming.m.lin@intel.com>
Date		: 2008-09-04 7:06 (24 days old)
References	: http://marc.info/?l=linux-kernel&m=122051202202373&w=4
		  http://marc.info/?t=122089704700005&r=1&w=4
Handled-By	: Peter Zijlstra <a.p.zijlstra@chello.nl>
		  Gregory Haskins <ghaskins@novell.com>
		  Ingo Molnar <mingo@elte.hu>
Patch		: http://marc.info/?l=linux-kernel&m=122194673932703&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11442
Subject		: btusb hibernation/suspend breakage in current -git
Submitter	: Rafael J. Wysocki <rjw@sisk.pl>
Date		: 2008-08-25 11:37 (34 days old)
References	: http://marc.info/?l=linux-bluetooth&m=121966402012074&w=4
Handled-By	: Oliver Neukum <oliver@neukum.org>
Patch		: http://marc.info/?l=linux-bluetooth&m=121967226027323&w=4
		  http://bugzilla.kernel.org/show_bug.cgi?id=11442#c1


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11237
Subject		: corrupt PMD after resume
Submitter	: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Date		: 2008-08-02 9:51 (57 days old)
References	: http://marc.info/?l=linux-kernel&m=121767073424952&w=4
Handled-By	: Hugh Dickins <hugh@veritas.com>
		  Jeremy Fitzhardinge <jeremy@goop.org>
Patch		: http://marc.info/?l=linux-kernel&m=122001615314700&w=2


For details, please visit the bug entries and follow the links given in
references.

As you can see, there is a Bugzilla entry for each of the listed regressions.
There also is a Bugzilla entry used for tracking the regressions from 2.6.26,
unresolved as well as resolved, at:

http://bugzilla.kernel.org/show_bug.cgi?id=11167

Please let me know if there are any Bugzilla entries that should be added to
the list in there.

Thanks,
Rafael

[Bug #11207] VolanoMark regression with 2.6.27-rc1

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11207
Subject		: VolanoMark regression with 2.6.27-rc1
Submitter	: Zhang, Yanmin <yanmin_zhang@linux.intel.com>
Date		: 2008-07-31 3:20 (59 days old)
References	: http://marc.info/?l=linux-kernel&m=121747464114335&w=4
Handled-By	: Zhang, Yanmin <yanmin_zhang@linux.intel.com>
		  Peter Zijlstra <a.p.zijlstra@chello.nl>
		  Dhaval Giani <dhaval@linux.vnet.ibm.com>
		  Miao Xie <miaox@cn.fujitsu.com>

[Bug #11210] libata badness

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11210
Subject		: libata badness
Submitter	: Kumar Gala <galak@kernel.crashing.org>
Date		: 2008-07-31 18:53 (59 days old)
References	: http://marc.info/?l=linux-ide&m=121753059307310&w=4
Handled-By	: Kumar Gala <galak@kernel.crashing.org>

[Bug #11215] INFO: possible recursive locking detected ps2 command

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11215
Subject		: INFO: possible recursive locking detected ps2_command
Submitter	: Zdenek Kabelac <zdenek.kabelac@gmail.com>
Date		: 2008-07-31 9:41 (59 days old)
References	: http://marc.info/?l=linux-kernel&m=121749737011637&w=4
Handled-By	: Peter Zijlstra <a.p.zijlstra@chello.nl>

[Bug #11220] Screen stays black after resume

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11220
Subject		: Screen stays black after resume
Submitter	: Nico Schottelius <nico@schottelius.org>
Date		: 2008-07-31 21:05 (59 days old)
References	: http://marc.info/?l=linux-kernel&m=121753882422899&w=4

[Bug #11224] Only three cores found on quad-core machine.

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11224
Subject		: Only three cores found on quad-core machine.
Submitter	: Dave Jones <davej@redhat.com>
Date		: 2008-08-01 18:15 (58 days old)
References	: http://marc.info/?l=linux-kernel&m=121761475224719&w=4

[Bug #11264] Invalid op opcode in kernel/workqueue

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11264
Subject		: Invalid op opcode in kernel/workqueue
Submitter	: Jean-Luc Coulon <jean.luc.coulon@gmail.com>
Date		: 2008-08-07 04:18 (52 days old)

[Bug #11237] corrupt PMD after resume

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11237
Subject		: corrupt PMD after resume
Submitter	: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Date		: 2008-08-02 9:51 (57 days old)
References	: http://marc.info/?l=linux-kernel&m=121767073424952&w=4
Handled-By	: Hugh Dickins <hugh@veritas.com>
		  Jeremy Fitzhardinge <jeremy@goop.org>
Patch		: http://marc.info/?l=linux-kernel&m=122001615314700&w=2

=?utf-8?q?[Bug=20#11230]=20Kconfig=20no=20longer=20outputs=20a=20.config=20with=20freshly=20updated=20defco=

[Rafael J. Wysocki]

nfigs?To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11230
Subject		: Kconfig no longer outputs a .config with freshly updated defconfigs
Submitter	: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Date		: 2008-08-02 16:03 (57 days old)
References	: http://marc.info/?l=linux-kernel&m=121769306319391&w=4

=?utf-8?q?[Bug=20#11272]=20BUG:=20parport_serial=20in=202.6.27-rc1=20for=20NetMos=20Technology=20PCI=2098=

[Rafael J. Wysocki]

35?To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11272
Subject		: BUG: parport_serial in 2.6.27-rc1 for NetMos Technology PCI 9835
Submitter	: Jaswinder Singh <jaswinderlinux@gmail.com>
Date		: 2008-08-05 15:12 (54 days old)
References	: http://marc.info/?l=linux-kernel&m=121794900319776&w=4

[Bug #11271] BUG: fealnx in 2.6.27-rc1

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11271
Subject		: BUG: fealnx in 2.6.27-rc1
Submitter	: Jaswinder Singh <jaswinderlinux@gmail.com>
Date		: 2008-08-05 14:58 (54 days old)
References	: http://marc.info/?l=linux-netdev&m=121794762016830&w=4
		  http://lkml.org/lkml/2008/8/10/98
Handled-By	: Francois Romieu <romieu@fr.zoreil.com>

=?utf-8?q?[Bug=20#11308]=20tbench=20regression=20on=20each=20kernel=20release=20from=20=202.6.22=20->=202.=

[Rafael J. Wysocki]

6.28?To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11308
Subject		: tbench regression on each kernel release from 2.6.22 -&gt; 2.6.28
Submitter	: Christoph Lameter <cl@linux-foundation.org>
Date		: 2008-08-11 18:36 (48 days old)
References	: http://marc.info/?l=linux-kernel&m=121847986119495&w=4
		  http://marc.info/?l=linux-kernel&m=122125737421332&w=4

[Bug #11340] LTP overnight run resulted in unusable box

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11340
Subject		: LTP overnight run resulted in unusable box
Submitter	: Alexey Dobriyan <adobriyan@gmail.com>
Date		: 2008-08-13 9:24 (46 days old)
References	: http://marc.info/?l=linux-kernel&m=121861951902949&w=4

[Bug #11404] BUG: in 2.6.23-rc3-git7 in do cciss intr

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11404
Subject		: BUG: in 2.6.23-rc3-git7 in do_cciss_intr
Submitter	: rdunlap <randy.dunlap@oracle.com>
Date		: 2008-08-21 5:52 (38 days old)
References	: http://marc.info/?l=linux-kernel&m=121929819616273&w=4
		  http://marc.info/?l=linux-kernel&m=121932889105368&w=4
Handled-By	: Miller, Mike (OS Dev) <Mike.Miller@hp.com>
		  James Bottomley <James.Bottomley@hansenpartnership.com>

[Bug #11382] e1000e: 2.6.27-rc1 corrupts EEPROM/NVM

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11382
Subject		: e1000e: 2.6.27-rc1 corrupts EEPROM/NVM
Submitter	: David Vrabel <david.vrabel@csr.com>
Date		: 2008-08-08 10:47 (51 days old)
References	: http://marc.info/?l=linux-kernel&m=121819267211679&w=4
Handled-By	: Christopher Li <chrisl@vmware.com>

=?utf-8?q?[Bug=20#11380]=20lockdep=20warning:=20cpu_add_remove_lock=20at:cpu_maps_update_begin+=

[Rafael J. Wysocki]

0x14/0x16?To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11380
Subject		: lockdep warning: cpu_add_remove_lock at:cpu_maps_update_begin+0x14/0x16
Submitter	: Ingo Molnar <mingo@elte.hu>
Date		: 2008-08-20 6:44 (39 days old)
References	: http://marc.info/?l=linux-kernel&m=121921480931970&w=4

[Bug #11442] btusb hibernation/suspend breakage in current -git

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11442
Subject		: btusb hibernation/suspend breakage in current -git
Submitter	: Rafael J. Wysocki <rjw@sisk.pl>
Date		: 2008-08-25 11:37 (34 days old)
References	: http://marc.info/?l=linux-bluetooth&m=121966402012074&w=4
Handled-By	: Oliver Neukum <oliver@neukum.org>
Patch		: http://marc.info/?l=linux-bluetooth&m=121967226027323&w=4
		  http://bugzilla.kernel.org/show_bug.cgi?id=11442#c1

[Bug #11407] suspend: unable to handle kernel paging request

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11407
Subject		: suspend: unable to handle kernel paging request
Submitter	: Vegard Nossum <vegard.nossum@gmail.com>
Date		: 2008-08-21 17:28 (38 days old)
References	: http://marc.info/?l=linux-kernel&m=121933974928881&w=4
Handled-By	: Rafael J. Wysocki <rjw@sisk.pl>
		  Pekka Enberg <penberg@cs.helsinki.fi>
		  Pavel Machek <pavel@suse.cz>

[Bug #11505] oltp ~10% regression with 2.6.27-rc5 on stoakley machine

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11505
Subject		: oltp ~10% regression with 2.6.27-rc5 on stoakley machine
Submitter	: Lin Ming <ming.m.lin@intel.com>
Date		: 2008-09-04 7:06 (24 days old)
References	: http://marc.info/?l=linux-kernel&m=122051202202373&w=4
		  http://marc.info/?t=122089704700005&r=1&w=4
Handled-By	: Peter Zijlstra <a.p.zijlstra@chello.nl>
		  Gregory Haskins <ghaskins@novell.com>
		  Ingo Molnar <mingo@elte.hu>
Patch		: http://marc.info/?l=linux-kernel&m=122194673932703&w=4

[Bug #11504] reiserfs BUG in 2.6.27-rc5

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11504
Subject		: reiserfs  BUG in 2.6.27-rc5
Submitter	: Randy Dunlap <randy.dunlap@oracle.com>
Date		: 2008-09-03 16:35 (25 days old)
References	: http://marc.info/?l=linux-kernel&m=122045982120138&w=4

[Bug #11476] failure to associate after resume from suspend to ram

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11476
Subject		: failure to associate after resume from suspend to ram
Submitter	: Michael S. Tsirkin <m.s.tsirkin@gmail.com>
Date		: 2008-09-01 13:33 (27 days old)
References	: http://marc.info/?l=linux-kernel&m=122028529415108&w=4
Handled-By	: Zhu Yi <yi.zhu@intel.com>
		  Dan Williams <dcbw@redhat.com>
		  Jouni Malinen <j@w1.fi>

[Bug #11506] oops during unmount - ext320(2.6.27-rc5)?=

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11506
Subject		: oops during unmount - ext3? (2.6.27-rc5)
Submitter	: Marcin Slusarz <marcin.slusarz@gmail.com>
Date		: 2008-09-04 19:14 (24 days old)
References	: http://marc.info/?l=linux-kernel&m=122055573123449&w=4

=?utf-8?q?[Bug=20#11512]=20sort-of=20regression=20due=20to=20"kconfig:=20speed=20up=20all*config=20+=20rand=

[Rafael J. Wysocki]

config"?To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11512
Subject		: sort-of regression due to "kconfig: speed up all*config + randconfig"
Submitter	: Alexey Dobriyan <adobriyan@gmail.com>
Date		: 2008-09-05 22:50 (23 days old)
References	: http://marc.info/?l=linux-kernel&m=122065498013858&w=4

=?utf-8?q?[Bug=20#11516]=20severe=20performance=20degradation=20on=20x86_64=20going=20from=202.6.26-rc9=

[Rafael J. Wysocki]

 -&gt; 2.6.27-rc5?To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11516
Subject		: severe performance degradation on x86_64 going from 2.6.26-rc9 -&gt; 2.6.27-rc5
Submitter	: Jason Vas Dias <jason.vas.dias@gmail.com>
Date		: 2008-09-07 13:59 (21 days old)

=?utf-8?q?[Bug=20#11543]=20kernel=20panic:=20softlockup=20in=20tick_periodic()=20????=

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11543
Subject		: kernel panic: softlockup in tick_periodic() ???
Submitter	: Joshua Hoblitt <j_kernel@hoblitt.com>
Date		: 2008-09-11 16:46 (17 days old)
References	: http://marc.info/?l=linux-kernel&m=122117786124326&w=4
Handled-By	: Thomas Gleixner <tglx@linutronix.de>
		  Cyrill Gorcunov <gorcunov@gmail.com>
		  Ingo Molnar <mingo@elte.hu>

[Bug #11549] 2.6.27-rc5 acpi: EC Storm error message on bootup

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11549
Subject		: 2.6.27-rc5 acpi: EC Storm error message on bootup
Submitter	: <jmerkey@wolfmountaingroup.com>
Date		: 2008-09-02 21:27 (26 days old)
References	: http://marc.info/?l=linux-kernel&m=122039255517586&w=4
Handled-By	: Alexey Starikovskiy <astarikovskiy@suse.de>
Patch		: http://bugzilla.kernel.org/attachment.cgi?id=18047&action=view

[Bug #11569] Don't complain about disabled irqs when the system has paniced

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11569
Subject		: Don't complain about disabled irqs when the system has paniced
Submitter	: Andi Kleen <andi@firstfloor.org>
Date		: 2008-09-02 13:49 (26 days old)
References	: http://marc.info/?l=linux-kernel&m=122036356127282&w=4

[Bug #11568] spontaneous reboot on resume with 2.6.27

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11568
Subject		: spontaneous reboot on resume with 2.6.27
Submitter	: Andy Wettstein <ajw1980@gmail.com>
Date		: 2008-09-14 20:00 (14 days old)

[Bug #11550] pnp: Huge number of "io resource overlap" messages

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11550
Subject		: pnp: Huge number of "io resource overlap" messages
Submitter	: Frans Pop <elendil@planet.nl>
Date		: 2008-09-09 10:50 (19 days old)
References	: http://marc.info/?l=linux-kernel&m=122095745403793&w=4
Handled-By	: Rene Herman <rene.herman@keyaccess.nl>
		  Bjorn Helgaas <bjorn.helgaas@hp.com>
Patch		: http://marc.info/?l=linux-kernel&m=122246533505643&w=4

[Bug #11607] 2.6.27-rc6 Bug in tty chars in buffer

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11607
Subject		: 2.6.27-rc6  Bug in tty_chars_in_buffer
Submitter	: John Daiker <daikerjohn@gmail.com>
Date		: 2008-09-15 2:26 (13 days old)
References	: http://marc.info/?l=linux-kernel&m=122144565514490&w=4

[Bug #11615] sata nv EH problems

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11615
Subject		: sata_nv EH problems
Submitter	: Pär Andersson <paran@lysator.liu.se>
Date		: 2008-09-21 18:09 (7 days old)

[Bug #11608] 2.6.27-rc6 BUG: unable to handle kernel paging request

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11608
Subject		: 2.6.27-rc6 BUG: unable to handle kernel paging request
Submitter	: John Daiker <daikerjohn@gmail.com>
Date		: 2008-09-16 23:00 (12 days old)
References	: http://marc.info/?l=linux-kernel&m=122160611517267&w=4

[Bug #11643] ALSA sound/core/pcm native.c:1947: BUG20(err=20>=3D=200)?=

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11643
Subject		: ALSA sound/core/pcm_native.c:1947: BUG? (err >= 0)
Submitter	: sangu <sangu.gnome@gmail.com>
Date		: 2008-09-24 16:51 (4 days old)

[Bug #11629] quad G5 fails to shut down

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11629
Subject		: quad G5 fails to shut down
Submitter	: Johannes Berg <johannes@sipsolutions.net>
Date		: 2008-09-23 14:20 (5 days old)
Handled-By	: Johannes Berg <johannes@sipsolutions.net>
Patch		: http://bugzilla.kernel.org/show_bug.cgi?id=11629#c8

[Bug #11634] Sometime my laptop is dead on resume from ram

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11634
Subject		: Sometime my laptop is dead on resume from ram
Submitter	: Romano Giannetti <romano.giannetti@gmail.com>
Date		: 2008-09-24 01:12 (4 days old)

[Bug #11654] Devices enabled in /proc/acpi/wakeup do not wake up any more

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11654
Subject		: Devices enabled in /proc/acpi/wakeup do not wake up any more
Submitter	: Tino Keitel <tino.keitel@gmx.de>
Date		: 2008-09-22 20:29 (6 days old)
References	: http://marc.info/?l=linux-kernel&m=122211535021493&w=4
		  http://marc.info/?l=linux-kernel&m=122224359222164&w=4
Handled-By	: Rafael J. Wysocki <rjw@sisk.pl>
Patch		: http://marc.info/?l=linux-kernel&m=122238185304167&w=4
		  http://marc.info/?l=linux-kernel&m=122237497811138&w=4

Re: [Bug #11237] corrupt PMD after resume

[Ingo Molnar]

* Rafael J. Wysocki <rjw@sisk.pl> wrote:

> This message has been generated automatically as a part of a report of 
> recent regressions.
> 
> The following bug entry is on the current list of known regressions 
> from 2.6.26.  Please verify if it still should be listed and let me 
> know (either way).
> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11237
> Subject		: corrupt PMD after resume
> Submitter	: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
> Date		: 2008-08-02 9:51 (57 days old)
> References	: http://marc.info/?l=linux-kernel&m=121767073424952&w=4
> Handled-By	: Hugh Dickins <hugh@veritas.com>
> 		  Jeremy Fitzhardinge <jeremy@goop.org>
> Patch		: http://marc.info/?l=linux-kernel&m=122001615314700&w=2

actually, it's now believed that this is a BIOS problem that affects all 
Linux versions. The aspect of v2.6.27 is that it happens to put kernel 
pagetables into the area that gets corrupted by the BIOS - and users 
notice that.

i.e. it's not a regression - unless i'm missing something.

	Ingo

Re: 2.6.27-rc7-git5: Reported regressions from 2.6.26

[Rafael J. Wysocki]

On Saturday, 27 of September 2008, Rafael J. Wysocki wrote:
> This message contains a list of some regressions from 2.6.26, for which there
> are no fixes in the mainline I know of.  If any of them have been fixed already,
> please let me know.
> 
> If you know of any other unresolved regressions from 2.6.26, please let me know
> either and I'll add them to the list.  Also, please let me know if any of the
> entries below are invalid.
> 
> Each entry from the list will be sent additionally in an automatic reply to
> this message with CCs to the people involved in reporting and handling the
> issue.
> 
> 
> Listed regressions statistics:
> 
>   Date          Total  Pending  Unresolved
>   ----------------------------------------
>   2008-09-27      173       35          28

Ah, I forgot about the previous statistics:


Listed regressions statistics:

  Date          Total  Pending  Unresolved
  ----------------------------------------
  2008-09-27      173       35          28
  2008-09-21      169       45          36
  2008-09-15      163       46          32
  2008-09-12      163       51          38
  2008-09-07      150       43          33
  2008-08-30      135       48          36
  2008-08-23      122       48          40
  2008-08-16      103       47          37
  2008-08-10       80       52          31
  2008-08-02       47       31          20

Re: 2.6.27-rc7-git5: Reported regressions from 2.6.26

[Rafael J. Wysocki]

On Saturday, 27 of September 2008, Rafael J. Wysocki wrote:
> This message contains a list of some regressions from 2.6.26, for which there
> are no fixes in the mainline I know of.  If any of them have been fixed already,
> please let me know.
> 
> If you know of any other unresolved regressions from 2.6.26, please let me know
> either and I'll add them to the list.  Also, please let me know if any of the
> entries below are invalid.
> 
> Each entry from the list will be sent additionally in an automatic reply to
> this message with CCs to the people involved in reporting and handling the
> issue.

Some of the follow-up messages are borked because of a bug in my script.

Sorry for that, the script has been fixed already.

Thanks,
Rafael

Re: [Bug #11237] corrupt PMD after resume

[Rafael J. Wysocki]

On Saturday, 27 of September 2008, Ingo Molnar wrote:
> 
> * Rafael J. Wysocki <rjw@sisk.pl> wrote:
> 
> > This message has been generated automatically as a part of a report of 
> > recent regressions.
> > 
> > The following bug entry is on the current list of known regressions 
> > from 2.6.26.  Please verify if it still should be listed and let me 
> > know (either way).
> > 
> > 
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11237
> > Subject		: corrupt PMD after resume
> > Submitter	: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
> > Date		: 2008-08-02 9:51 (57 days old)
> > References	: http://marc.info/?l=linux-kernel&m=121767073424952&w=4
> > Handled-By	: Hugh Dickins <hugh@veritas.com>
> > 		  Jeremy Fitzhardinge <jeremy@goop.org>
> > Patch		: http://marc.info/?l=linux-kernel&m=122001615314700&w=2
> 
> actually, it's now believed that this is a BIOS problem that affects all 
> Linux versions. The aspect of v2.6.27 is that it happens to put kernel 
> pagetables into the area that gets corrupted by the BIOS - and users 
> notice that.
> 
> i.e. it's not a regression - unless i'm missing something.

OK, I dropped it from the list.

Thanks,
Rafael

Re: [Bug #11543] kernel panic: softlockup in tick periodic()

[Cyrill Gorcunov]

[Rafael J. Wysocki - Sat, Sep 27, 2008 at 05:56:46PM +0200]
| This message has been generated automatically as a part of a report
| of recent regressions.
| 
| The following bug entry is on the current list of known regressions
| from 2.6.26.  Please verify if it still should be listed and let me know
| (either way).
| 
| 
| Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11543
| Subject		: kernel panic: softlockup in tick_periodic() ???
| Submitter	: Joshua Hoblitt <j_kernel@hoblitt.com>
| Date		: 2008-09-11 16:46 (17 days old)
| References	: http://marc.info/?l=linux-kernel&m=122117786124326&w=4
| Handled-By	: Thomas Gleixner <tglx@linutronix.de>
| 		  Cyrill Gorcunov <gorcunov@gmail.com>
| 		  Ingo Molnar <mingo@elte.hu>
| 
| 

Hi Rafael!

Well, Thomas already explained

| The softlockup issue itself is fixed, but there are issues with
| nmi_watchdog. I think we should remove the regression and keep the bug
| alive to chase the other issues.
|
| Thanks,
|
|        tglx

so we either have to change the topic of this bug or better
close it and post new one nmi_watchdog related. I may do so
but since Joshua was opening bug it would be better if he
make such an action. How do you think? (I've asked Joshua
for additional info but it seems he is too busy now)

		- Cyrill -

Re: [Bug #11543] kernel panic: softlockup in tick periodic()

[Rafael J. Wysocki]

On Saturday, 27 of September 2008, Cyrill Gorcunov wrote:
> [Rafael J. Wysocki - Sat, Sep 27, 2008 at 05:56:46PM +0200]
> | This message has been generated automatically as a part of a report
> | of recent regressions.
> | 
> | The following bug entry is on the current list of known regressions
> | from 2.6.26.  Please verify if it still should be listed and let me know
> | (either way).
> | 
> | 
> | Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11543
> | Subject		: kernel panic: softlockup in tick_periodic() ???
> | Submitter	: Joshua Hoblitt <j_kernel@hoblitt.com>
> | Date		: 2008-09-11 16:46 (17 days old)
> | References	: http://marc.info/?l=linux-kernel&m=122117786124326&w=4
> | Handled-By	: Thomas Gleixner <tglx@linutronix.de>
> | 		  Cyrill Gorcunov <gorcunov@gmail.com>
> | 		  Ingo Molnar <mingo@elte.hu>
> | 
> | 
> 
> Hi Rafael!
> 
> Well, Thomas already explained
> 
> | The softlockup issue itself is fixed, but there are issues with
> | nmi_watchdog. I think we should remove the regression and keep the bug
> | alive to chase the other issues.
> |
> | Thanks,
> |
> |        tglx
> 
> so we either have to change the topic of this bug or better
> close it and post new one nmi_watchdog related. I may do so
> but since Joshua was opening bug it would be better if he
> make such an action. How do you think? (I've asked Joshua
> for additional info but it seems he is too busy now)

I had tried to close it, but someone reopened it afterwards.

Thanks,
Rafael

RE: [Bug #11404] BUG: in 2.6.23-rc3-git7 in do cciss intr

[Miller, Mike (OS Dev)]

> -----Original Message-----
> From: Rafael J. Wysocki [mailto:rjw@sisk.pl]
> Sent: Saturday, September 27, 2008 10:57 AM
> To: Linux Kernel Mailing List
> Cc: Kernel Testers List; James Bottomley; Miller, Mike (OS
> Dev); rdunlap
> Subject: [Bug #11404] BUG: in 2.6.23-rc3-git7 in do cciss intr
>
> This message has been generated automatically as a part of a
> report of recent regressions.
>
> The following bug entry is on the current list of known
> regressions from 2.6.26.  Please verify if it still should be
> listed and let me know (either way).
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=11404
> Subject         : BUG: in 2.6.23-rc3-git7 in do_cciss_intr
> Submitter       : rdunlap <randy.dunlap@oracle.com>
> Date            : 2008-08-21 5:52 (38 days old)
> References      :
> http://marc.info/?l=linux-kernel&m=121929819616273&w=4
>
> http://marc.info/?l=linux-kernel&m=121932889105368&w=4
> Handled-By      : Miller, Mike (OS Dev) <Mike.Miller@hp.com>
>                   James Bottomley
> <James.Bottomley@hansenpartnership.com>
>

Please continue to track this bug.

-- mikem
>
>

Re: [Bug #11654] Devices enabled in /proc/acpi/wakeup do not wake up any more

[Tino Keitel]

On Sat, Sep 27, 2008 at 17:56:50 +0200, Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a report
> of recent regressions.
> 
> The following bug entry is on the current list of known regressions
> from 2.6.26.  Please verify if it still should be listed and let me know
> (either way).
> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11654
> Subject		: Devices enabled in /proc/acpi/wakeup do not wake up any more
> Submitter	: Tino Keitel <tino.keitel@gmx.de>
> Date		: 2008-09-22 20:29 (6 days old)
> References	: http://marc.info/?l=linux-kernel&m=122211535021493&w=4
> 		  http://marc.info/?l=linux-kernel&m=122224359222164&w=4
> Handled-By	: Rafael J. Wysocki <rjw@sisk.pl>
> Patch		: http://marc.info/?l=linux-kernel&m=122238185304167&w=4
> 		  http://marc.info/?l=linux-kernel&m=122237497811138&w=4
> 

The above patches fix the problems for me.

Thanks and regards,
Tino

Re: [Bug #11550] pnp: Huge number of "io resource overlap" messages

[Bjorn Helgaas]

On Thursday 19 March 2009 08:07:51 pm Jesse Barnes wrote:
> On Wed, 4 Mar 2009 14:53:51 -0700
> Bjorn Helgaas <bjorn.helgaas@hp.com> wrote:
> 
> > On Wednesday 04 March 2009 01:17:15 pm Frans Pop wrote:
> > > Original thread:
> > > http://marc.info/?l=linux-kernel&m=122095745403793&w=4
> > 
> > Seems like we do need something, but this patch is kind of a klunky
> > approach, so I'd like to come up with a better proposal.  I don't
> > have any better ideas yet, though.
> 
> Patch actually seems pretty reasonable to me, though like we discussed
> at kernel summit last year, there are places where a 0 resource is
> assumed to mean "not assigned".  And clearly we need to do something
> here...  Anyone else have better ideas than Bjorn's patch below?

IIRC, Linus complained that it was ugly and slow to do all those
config space reads, and I have to agree with him.  I'd like it
better if we had some sort of pci_dev "enabled" flag or if we could
make it so the pci_dev resources were invalid when the device is
disabled.

Bjorn

> > > diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
> > > index 32e8d88..e63f800 100644
> > > --- a/drivers/pci/setup-res.c
> > > +++ b/drivers/pci/setup-res.c
> > > @@ -26,6 +26,28 @@
> > >  #include "pci.h"
> > >  
> > >  
> > > +int pci_resource_enabled(struct pci_dev *dev, int bar)
> > > +{
> > > +	u16 command = 0;
> > > +	u32 addr = 0;
> > > +
> > > +	pci_read_config_word(dev, PCI_COMMAND, &command);
> > > +
> > > +	if (pci_resource_flags(dev, bar) & IORESOURCE_IO)
> > > +		return command & PCI_COMMAND_IO;
> > > +
> > > +	if (command & PCI_COMMAND_MEMORY) {
> > > +		if (bar == PCI_ROM_RESOURCE) {
> > > +			pci_read_config_dword(dev,
> > > dev->rom_base_reg, &addr);
> > > +			return addr & PCI_ROM_ADDRESS_ENABLE;
> > > +		}
> > > +
> > > +		return 1;
> > > +	}
> > > +
> > > +	return 0;
> > > +}
> > > +
> > >  void pci_update_resource(struct pci_dev *dev, int resno)
> > >  {
> > >  	struct pci_bus_region region;
> > > diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c
> > > index 8473fe5..1f37988 100644
> > > --- a/drivers/pnp/quirks.c
> > > +++ b/drivers/pnp/quirks.c
> > > @@ -247,6 +247,9 @@ static void quirk_system_pci_resources(struct
> > > pnp_dev *dev) for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
> > >  			unsigned long type;
> > >  
> > > +			if (!pci_resource_enabled(pdev, i))
> > > +				continue;
> > > +
> > >  			type = pci_resource_flags(pdev, i) &
> > >  					(IORESOURCE_IO |
> > > IORESOURCE_MEM); if (!type || pci_resource_len(pdev, i) == 0)
> > > diff --git a/include/linux/pci.h b/include/linux/pci.h
> > > index c927ae9..9848ac2 100644
> > > --- a/include/linux/pci.h
> > > +++ b/include/linux/pci.h
> > > @@ -870,6 +870,8 @@ static inline int pci_proc_domain(struct
> > > pci_bus *bus) }
> > >  #endif /* CONFIG_PCI_DOMAINS */
> > >  
> > > +extern int pci_resource_enabled(struct pci_dev *dev, int bar);
> > > +
> > >  #else /* CONFIG_PCI is not enabled */
> > >  
> > >  /*
> > > @@ -1050,6 +1052,9 @@ static inline struct pci_dev
> > > *pci_get_bus_and_slot(unsigned int bus, unsigned int devfn)
> > >  { return NULL; }
> > >  
> > > +static inline int pci_resource_enabled(struct pci_dev *dev, int
> > > bar) +{ return 0; }
> > > +
> > >  #endif /* CONFIG_PCI */
> > >  
> > >  /* Include architecture-dependent settings and functions */
> > > 
> > > 
> > 
> > 
> > 
> 
> 

Re: [Bug #11550] pnp: Huge number of "io resource overlap" messages

[Jesse Barnes]

On Wed, 4 Mar 2009 14:53:51 -0700
Bjorn Helgaas <bjorn.helgaas@hp.com> wrote:

> On Wednesday 04 March 2009 01:17:15 pm Frans Pop wrote:
> > Original thread:
> > http://marc.info/?l=linux-kernel&m=122095745403793&w=4
> 
> Seems like we do need something, but this patch is kind of a klunky
> approach, so I'd like to come up with a better proposal.  I don't
> have any better ideas yet, though.

Patch actually seems pretty reasonable to me, though like we discussed
at kernel summit last year, there are places where a 0 resource is
assumed to mean "not assigned".  And clearly we need to do something
here...  Anyone else have better ideas than Bjorn's patch below?

> > diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
> > index 32e8d88..e63f800 100644
> > --- a/drivers/pci/setup-res.c
> > +++ b/drivers/pci/setup-res.c
> > @@ -26,6 +26,28 @@
> >  #include "pci.h"
> >  
> >  
> > +int pci_resource_enabled(struct pci_dev *dev, int bar)
> > +{
> > +	u16 command = 0;
> > +	u32 addr = 0;
> > +
> > +	pci_read_config_word(dev, PCI_COMMAND, &command);
> > +
> > +	if (pci_resource_flags(dev, bar) & IORESOURCE_IO)
> > +		return command & PCI_COMMAND_IO;
> > +
> > +	if (command & PCI_COMMAND_MEMORY) {
> > +		if (bar == PCI_ROM_RESOURCE) {
> > +			pci_read_config_dword(dev,
> > dev->rom_base_reg, &addr);
> > +			return addr & PCI_ROM_ADDRESS_ENABLE;
> > +		}
> > +
> > +		return 1;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> >  void pci_update_resource(struct pci_dev *dev, int resno)
> >  {
> >  	struct pci_bus_region region;
> > diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c
> > index 8473fe5..1f37988 100644
> > --- a/drivers/pnp/quirks.c
> > +++ b/drivers/pnp/quirks.c
> > @@ -247,6 +247,9 @@ static void quirk_system_pci_resources(struct
> > pnp_dev *dev) for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
> >  			unsigned long type;
> >  
> > +			if (!pci_resource_enabled(pdev, i))
> > +				continue;
> > +
> >  			type = pci_resource_flags(pdev, i) &
> >  					(IORESOURCE_IO |
> > IORESOURCE_MEM); if (!type || pci_resource_len(pdev, i) == 0)
> > diff --git a/include/linux/pci.h b/include/linux/pci.h
> > index c927ae9..9848ac2 100644
> > --- a/include/linux/pci.h
> > +++ b/include/linux/pci.h
> > @@ -870,6 +870,8 @@ static inline int pci_proc_domain(struct
> > pci_bus *bus) }
> >  #endif /* CONFIG_PCI_DOMAINS */
> >  
> > +extern int pci_resource_enabled(struct pci_dev *dev, int bar);
> > +
> >  #else /* CONFIG_PCI is not enabled */
> >  
> >  /*
> > @@ -1050,6 +1052,9 @@ static inline struct pci_dev
> > *pci_get_bus_and_slot(unsigned int bus, unsigned int devfn)
> >  { return NULL; }
> >  
> > +static inline int pci_resource_enabled(struct pci_dev *dev, int
> > bar) +{ return 0; }
> > +
> >  #endif /* CONFIG_PCI */
> >  
> >  /* Include architecture-dependent settings and functions */
> > 
> > 
> 
> 
> 


-- 
Jesse Barnes, Intel Open Source Technology Center

Re: [Bug #11550] pnp: Huge number of "io resource overlap" messages

[Bjorn Helgaas]

On Wednesday 04 March 2009 01:17:15 pm Frans Pop wrote:
> On Friday 26 September 2008, Bjorn Helgaas wrote:
> > http://bugzilla.kernel.org/show_bug.cgi?id=11550
> 
> Sorry for having to revive this old thread. In November 2008 I reported
> that this issue had been solved for me as a result of 1f98757776ea, but I
> now find that was due to faulty testing. (I suspect that changing the BIOS
> setting that affects this issue on my Toshiba laptop only takes effect
> after a cold boot, not a normal reboot.)
> 
> The problem was that with the BIOS setting for "Device config" set to
> "Setup by OS", I get 78 messages like:
>     pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
>     pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
> 
> If the BIOS setting is set to "All Devices", the problem does not occur.
> 
> The origin of these messages was bisected to:
> commit aee3ad815dd291a7193ab01da0f1a30c84d00061
> Author: Bjorn Helgaas <bjorn.helgaas@hp.com>
> Date:   Fri Jun 27 16:56:57 2008 -0600
>     PNP: replace pnp_resource_table with dynamically allocated resources
> 
> Last analysis from Bjorn was:
> > The problem seems to be that Frans has some PCI devices that are not
> > configured by the BIOS, and their BARs contain zero.  A PNP quirk
> > checks for overlaps of PCI devices and PNP devices, and those zero-
> > valued BARs of course conflict with the PNP motherboard devices that
> > describe legacy hardware.
> >
> > Here's another approach based on section 3.5 of the PCI Firmware spec.
> > It says:
> >
> >   Since not all devices may be configured prior to the operating
> >   system handoff, the operating system needs to know whether a
> >   specific BAR register has been configured by firmware. The operating
> >   system makes the determination by checking the I/O Enable, and
> >   Memory Enable bits in the device's command register, and Expansion
> >   ROM BAR enable bits. If the enable bit is set, then the corresponding
> >   resource register has been configured.
> >
> > So instead of checking whether the BAR contains zero, the patch below
> > checks the I/O, Mem, and ROM BAR enable bits to determine whether a
> > BAR is enabled.
> 
> Below the then proposed patch from Bjorn, rediffed against 2.6.29-rc7.
> I've verified that the patch still solves the issue for me. Attached
> dmesg output for 2.6.29-rc7 without and with the patch.
> 
> Bjorn, could you please consider this patch for inclusion again?
> 
> Original thread: http://marc.info/?l=linux-kernel&m=122095745403793&w=4

Seems like we do need something, but this patch is kind of a klunky
approach, so I'd like to come up with a better proposal.  I don't
have any better ideas yet, though.

Bjorn
 
> diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
> index 32e8d88..e63f800 100644
> --- a/drivers/pci/setup-res.c
> +++ b/drivers/pci/setup-res.c
> @@ -26,6 +26,28 @@
>  #include "pci.h"
>  
>  
> +int pci_resource_enabled(struct pci_dev *dev, int bar)
> +{
> +	u16 command = 0;
> +	u32 addr = 0;
> +
> +	pci_read_config_word(dev, PCI_COMMAND, &command);
> +
> +	if (pci_resource_flags(dev, bar) & IORESOURCE_IO)
> +		return command & PCI_COMMAND_IO;
> +
> +	if (command & PCI_COMMAND_MEMORY) {
> +		if (bar == PCI_ROM_RESOURCE) {
> +			pci_read_config_dword(dev, dev->rom_base_reg, &addr);
> +			return addr & PCI_ROM_ADDRESS_ENABLE;
> +		}
> +
> +		return 1;
> +	}
> +
> +	return 0;
> +}
> +
>  void pci_update_resource(struct pci_dev *dev, int resno)
>  {
>  	struct pci_bus_region region;
> diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c
> index 8473fe5..1f37988 100644
> --- a/drivers/pnp/quirks.c
> +++ b/drivers/pnp/quirks.c
> @@ -247,6 +247,9 @@ static void quirk_system_pci_resources(struct pnp_dev *dev)
>  		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
>  			unsigned long type;
>  
> +			if (!pci_resource_enabled(pdev, i))
> +				continue;
> +
>  			type = pci_resource_flags(pdev, i) &
>  					(IORESOURCE_IO | IORESOURCE_MEM);
>  			if (!type || pci_resource_len(pdev, i) == 0)
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index c927ae9..9848ac2 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -870,6 +870,8 @@ static inline int pci_proc_domain(struct pci_bus *bus)
>  }
>  #endif /* CONFIG_PCI_DOMAINS */
>  
> +extern int pci_resource_enabled(struct pci_dev *dev, int bar);
> +
>  #else /* CONFIG_PCI is not enabled */
>  
>  /*
> @@ -1050,6 +1052,9 @@ static inline struct pci_dev *pci_get_bus_and_slot(unsigned int bus,
>  						unsigned int devfn)
>  { return NULL; }
>  
> +static inline int pci_resource_enabled(struct pci_dev *dev, int bar)
> +{ return 0; }
> +
>  #endif /* CONFIG_PCI */
>  
>  /* Include architecture-dependent settings and functions */
> 
> 

[Bug #11550] pnp: Huge number of "io resource overlap" messages

[Frans Pop]

[-- Attachment #1: Type: text/plain, Size: 4374 bytes --]

On Friday 26 September 2008, Bjorn Helgaas wrote:
> http://bugzilla.kernel.org/show_bug.cgi?id=11550

Sorry for having to revive this old thread. In November 2008 I reported
that this issue had been solved for me as a result of 1f98757776ea, but I
now find that was due to faulty testing. (I suspect that changing the BIOS
setting that affects this issue on my Toshiba laptop only takes effect
after a cold boot, not a normal reboot.)

The problem was that with the BIOS setting for "Device config" set to
"Setup by OS", I get 78 messages like:
    pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
    pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling

If the BIOS setting is set to "All Devices", the problem does not occur.

The origin of these messages was bisected to:
commit aee3ad815dd291a7193ab01da0f1a30c84d00061
Author: Bjorn Helgaas <bjorn.helgaas@hp.com>
Date:   Fri Jun 27 16:56:57 2008 -0600
    PNP: replace pnp_resource_table with dynamically allocated resources

Last analysis from Bjorn was:
> The problem seems to be that Frans has some PCI devices that are not
> configured by the BIOS, and their BARs contain zero.  A PNP quirk
> checks for overlaps of PCI devices and PNP devices, and those zero-
> valued BARs of course conflict with the PNP motherboard devices that
> describe legacy hardware.
>
> Here's another approach based on section 3.5 of the PCI Firmware spec.
> It says:
>
>   Since not all devices may be configured prior to the operating
>   system handoff, the operating system needs to know whether a
>   specific BAR register has been configured by firmware. The operating
>   system makes the determination by checking the I/O Enable, and
>   Memory Enable bits in the device's command register, and Expansion
>   ROM BAR enable bits. If the enable bit is set, then the corresponding
>   resource register has been configured.
>
> So instead of checking whether the BAR contains zero, the patch below
> checks the I/O, Mem, and ROM BAR enable bits to determine whether a
> BAR is enabled.

Below the then proposed patch from Bjorn, rediffed against 2.6.29-rc7.
I've verified that the patch still solves the issue for me. Attached
dmesg output for 2.6.29-rc7 without and with the patch.

Bjorn, could you please consider this patch for inclusion again?

Original thread: http://marc.info/?l=linux-kernel&m=122095745403793&w=4

TIA and sorry for the confusion,
FJP


diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 32e8d88..e63f800 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -26,6 +26,28 @@
 #include "pci.h"
 
 
+int pci_resource_enabled(struct pci_dev *dev, int bar)
+{
+	u16 command = 0;
+	u32 addr = 0;
+
+	pci_read_config_word(dev, PCI_COMMAND, &command);
+
+	if (pci_resource_flags(dev, bar) & IORESOURCE_IO)
+		return command & PCI_COMMAND_IO;
+
+	if (command & PCI_COMMAND_MEMORY) {
+		if (bar == PCI_ROM_RESOURCE) {
+			pci_read_config_dword(dev, dev->rom_base_reg, &addr);
+			return addr & PCI_ROM_ADDRESS_ENABLE;
+		}
+
+		return 1;
+	}
+
+	return 0;
+}
+
 void pci_update_resource(struct pci_dev *dev, int resno)
 {
 	struct pci_bus_region region;
diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c
index 8473fe5..1f37988 100644
--- a/drivers/pnp/quirks.c
+++ b/drivers/pnp/quirks.c
@@ -247,6 +247,9 @@ static void quirk_system_pci_resources(struct pnp_dev *dev)
 		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
 			unsigned long type;
 
+			if (!pci_resource_enabled(pdev, i))
+				continue;
+
 			type = pci_resource_flags(pdev, i) &
 					(IORESOURCE_IO | IORESOURCE_MEM);
 			if (!type || pci_resource_len(pdev, i) == 0)
diff --git a/include/linux/pci.h b/include/linux/pci.h
index c927ae9..9848ac2 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -870,6 +870,8 @@ static inline int pci_proc_domain(struct pci_bus *bus)
 }
 #endif /* CONFIG_PCI_DOMAINS */
 
+extern int pci_resource_enabled(struct pci_dev *dev, int bar);
+
 #else /* CONFIG_PCI is not enabled */
 
 /*
@@ -1050,6 +1052,9 @@ static inline struct pci_dev *pci_get_bus_and_slot(unsigned int bus,
 						unsigned int devfn)
 { return NULL; }
 
+static inline int pci_resource_enabled(struct pci_dev *dev, int bar)
+{ return 0; }
+
 #endif /* CONFIG_PCI */
 
 /* Include architecture-dependent settings and functions */


[-- Attachment #2: 2.6.29-rc7 --]
[-- Type: text/plain, Size: 30943 bytes --]

Linux version 2.6.29-rc7 (root@aragorn) (gcc version 4.3.3 (Debian 4.3.3-5) ) #25 SMP Wed Mar 4 13:04:29 CET 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
 BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
 BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001ef40000 (usable)
 BIOS-e820: 000000001ef40000 - 000000001ef50000 (ACPI data)
 BIOS-e820: 000000001ef50000 - 000000001f000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
 BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
DMI 2.3 present.
last_pfn = 0x1ef40 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
kernel direct mapping tables up to 1ef40000 @ 7000-c000
RAMDISK: 1eb65000 - 1ef2f4b4
ACPI: RSDP 000F0180, 0014 (r0 TOSHIB)
ACPI: RSDT 1EF40000, 0038 (r1 TOSHIB 750        970814 TASM  4010000)
ACPI: FACP 1EF40060, 0084 (r2 TOSHIB 750      20030101 TASM  4010000)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT 1EF40558, 4B72 (r1 TOSHIB A000C    20031216 MSFT  100000E)
ACPI: FACS 000EEE00, 0040
ACPI: SSDT 1EF402CA, 0082 (r1 TOSHIB A000C    20030917 MSFT  100000E)
ACPI: DBGP 1EF400E4, 0034 (r1 TOSHIB 750        970814 TASM  4010000)
ACPI: BOOT 1EF40038, 0028 (r1 TOSHIB 750        970814 TASM  4010000)
ACPI: APIC 1EF40118, 0062 (r1 TOSHIB 750        970814 TASM  4010000)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
495MB LOWMEM available.
  mapped low ram: 0 - 1ef40000
  low ram: 00000000 - 1ef40000
  bootmap 00002000 - 00005de8
(9 early reservations) ==> bootmem [0000000000 - 001ef40000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000100000 - 0000498804]    TEXT DATA BSS ==> [0000100000 - 0000498804]
  #4 [001eb65000 - 001ef2f4b4]          RAMDISK ==> [001eb65000 - 001ef2f4b4]
  #5 [0000499000 - 000049c000]    INIT_PG_TABLE ==> [0000499000 - 000049c000]
  #6 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
  #8 [0000002000 - 0000006000]          BOOTMAP ==> [0000002000 - 0000006000]
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x0001ef40
  HighMem  0x0001ef40 -> 0x0001ef40
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0001ef40
On node 0 totalpages: 126687
free_area_init_node: node 0, pgdat c03cf520, node_mem_map c1000000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3967 pages, LIFO batch:0
  Normal zone: 959 pages used for memmap
  Normal zone: 121729 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xd808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 00000000000ee000
PM: Registered nosave memory: 00000000000ee000 - 00000000000ef000
PM: Registered nosave memory: 00000000000ef000 - 0000000000100000
Allocating PCI resources starting at 20000000 (gap: 1f000000:dfc00000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Allocating 32768 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125696
Kernel command line: root=/dev/mapper/strider-root ro vga=791 quiet
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
TSC: PIT calibration matches PMTIMER. 1 loops
Detected 2793.043 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 494568k/507136k available (1860k kernel code, 12052k reserved, 1112k data, 268k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff51000 - 0xfffff000   ( 696 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xdf740000 - 0xff7fe000   ( 512 MB)
    lowmem  : 0xc0000000 - 0xdef40000   ( 495 MB)
      .init : 0xc03ef000 - 0xc0432000   ( 268 kB)
      .data : 0xc02d127d - 0xc03e75ec   (1112 kB)
      .text : 0xc0100000 - 0xc02d127d   (1860 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.08 BogoMIPS (lpj=11172172)
Security Framework initialized
SELinux:  Disabled at boot.
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
[ds] using Netburst configuration
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20081204
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Mobile Intel(R) Pentium(R) 4     CPU 2.80GHz stepping 09
Brought up 1 CPUs
Total of 1 processors activated (5586.08 BogoMIPS).
CPU0 attaching NULL sched-domain.
net_namespace: 996 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd2fe, last bus=3
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI Warning (dsobject-0502): Package List length (F) larger than NumElements count (2), truncated
 [20081204]
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff]
pci 0000:00:02.0: reg 14 32bit mmio: [0xd0000000-0xd007ffff]
pci 0000:00:02.0: reg 18 io port: [0xeff8-0xefff]
pci 0000:00:02.0: supports D1
pci 0000:00:02.1: reg 10 32bit mmio: [0x20000000-0x27ffffff]
pci 0000:00:02.1: reg 14 32bit mmio: [0x2c000000-0x2c07ffff]
pci 0000:00:02.1: supports D1
pci 0000:00:1d.0: reg 20 io port: [0xcfe0-0xcfff]
pci 0000:00:1d.1: reg 20 io port: [0xcf80-0xcf9f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:1f.0: quirk: region d800-d87f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region eec0-eeff claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10 io port: [0xbff8-0xbfff]
pci 0000:00:1f.1: reg 14 io port: [0xbff4-0xbff7]
pci 0000:00:1f.1: reg 18 io port: [0xbfe8-0xbfef]
pci 0000:00:1f.1: reg 1c io port: [0xbfe4-0xbfe7]
pci 0000:00:1f.1: reg 20 io port: [0xbfa0-0xbfaf]
pci 0000:00:1f.1: reg 24 32bit mmio: [0x2c080400-0x2c0807ff]
pci 0000:00:1f.5: reg 10 io port: [0x00-0xff]
pci 0000:00:1f.5: reg 14 io port: [0x00-0x3f]
pci 0000:00:1f.5: reg 18 32bit mmio: [0x000000-0x0001ff]
pci 0000:00:1f.5: reg 1c 32bit mmio: [0x000000-0x0000ff]
pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.5: PME# disabled
pci 0000:00:1f.6: reg 10 io port: [0x00-0xff]
pci 0000:00:1f.6: reg 14 io port: [0x00-0x7f]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: PME# disabled
pci 0000:01:08.0: reg 10 32bit mmio: [0xcffff000-0xcfffffff]
pci 0000:01:08.0: reg 14 io port: [0xcf40-0xcf7f]
pci 0000:01:08.0: supports D1 D2
pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:08.0: PME# disabled
pci 0000:01:0b.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xcff00000-0xcfffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11)
ACPI: Power Resource [PFAN] (off)
PCI: Using ACPI for IRQ routing
pci 0000:00:1d.0: BAR 4: can't allocate resource
pci 0000:00:1d.1: BAR 4: can't allocate resource
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1d.0 BAR 4 (0x0-0x1f), disabling
pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1d.1 BAR 4 (0x0-0x1f), disabling
pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x62-0x62) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x66-0x66) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x80-0x80) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x84-0x86) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x88-0x88) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x8c-0x8e) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0xe0-0xef) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x24-0x25) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x28-0x29) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x2c-0x2d) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x30-0x31) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x34-0x35) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x38-0x39) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x3c-0x3d) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x50-0x53) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x63-0x63) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x65-0x65) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x72-0x77) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x90-0x9f) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0xa4-0xa5) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0xa8-0xa9) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0xac-0xad) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0xb0-0xb5) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0xb8-0xb9) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0xbc-0xbd) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
pnp 00:08: io resource (0x24-0x25) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
pnp 00:08: io resource (0x28-0x29) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
pnp 00:08: io resource (0x2c-0x2d) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
pnp 00:08: io resource (0x30-0x31) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
pnp 00:08: io resource (0x34-0x35) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
pnp 00:08: io resource (0x38-0x39) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
pnp 00:08: io resource (0x3c-0x3d) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x62-0x62) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x66-0x66) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x80-0x80) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x84-0x86) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x88-0x88) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x8c-0x8e) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0xe0-0xef) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x24-0x25) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x28-0x29) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x2c-0x2d) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x30-0x31) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x34-0x35) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x38-0x39) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x3c-0x3d) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x50-0x53) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x63-0x63) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x65-0x65) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x72-0x77) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x90-0x9f) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0xa4-0xa5) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0xa8-0xa9) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0xac-0xad) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0xb0-0xb5) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0xb8-0xb9) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0xbc-0xbd) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x62-0x62) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x66-0x66) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x24-0x25) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x28-0x29) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x2c-0x2d) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x30-0x31) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x34-0x35) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x38-0x39) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x3c-0x3d) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x50-0x53) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x63-0x63) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x65-0x65) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp 00:08: io resource (0x72-0x77) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xe0000-0xeffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x1ef3ffff could not be reserved
system 00:00: iomem range 0x1ef40000-0x1ef4ffff could not be reserved
system 00:00: iomem range 0x1ef50000-0x1effffff has been reserved
system 00:00: iomem range 0xfec10000-0xfec1ffff has been reserved
system 00:00: iomem range 0xfeda0000-0xfedbffff has been reserved
system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:00: iomem range 0xffe80000-0xffffffff has been reserved
system 00:08: ioport range 0x1e0-0x1ef has been reserved
system 00:08: ioport range 0x480-0x48f has been reserved
system 00:08: ioport range 0x680-0x6ff has been reserved
system 00:08: ioport range 0x800-0x80f has been reserved
system 00:08: ioport range 0xd800-0xd87f has been reserved
system 00:08: ioport range 0xd880-0xd89f has been reserved
system 00:08: ioport range 0xd8a0-0xd8bf has been reserved
system 00:08: ioport range 0xe000-0xe07f has been reserved
system 00:08: ioport range 0xe080-0xe0ff has been reserved
system 00:08: ioport range 0xe400-0xe47f has been reserved
system 00:08: ioport range 0xe480-0xe4ff has been reserved
system 00:08: ioport range 0xe800-0xe87f has been reserved
system 00:08: ioport range 0xe880-0xe8ff has been reserved
system 00:08: ioport range 0xec00-0xec7f has been reserved
system 00:08: ioport range 0xec80-0xecff has been reserved
system 00:08: ioport range 0xeeac-0xeeac has been reserved
system 00:08: ioport range 0xeeb0-0xeebf has been reserved
system 00:08: ioport range 0xeec0-0xeeff has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
pci 0000:01:0b.0: CardBus bridge, secondary bus 0000:02
pci 0000:01:0b.0:   IO window: 0x00c000-0x00c0ff
pci 0000:01:0b.0:   IO window: 0x00c400-0x00c4ff
pci 0000:01:0b.0:   PREFETCH window: 0x28000000-0x2bffffff
pci 0000:01:0b.0:   MEM window: 0x30000000-0x33ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1e.0:   IO window: 0xc000-0xcfff
pci 0000:00:1e.0:   MEM window: 0xcff00000-0xcfffffff
pci 0000:00:1e.0:   PREFETCH window: 0x00000028000000-0x0000002bffffff
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:01:0b.0: enabling device (0000 -> 0003)
pci 0000:01:0b.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io:  [0xc000-0xcfff]
pci_bus 0000:01: resource 1 mem: [0xcff00000-0xcfffffff]
pci_bus 0000:01: resource 2 mem: [0x28000000-0x2bffffff]
pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:02: resource 0 io:  [0xc000-0xc0ff]
pci_bus 0000:02: resource 1 io:  [0xc400-0xc4ff]
pci_bus 0000:02: resource 2 mem: [0x28000000-0x2bffffff]
pci_bus 0000:02: resource 3 mem: [0x30000000-0x33ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 3881k freed
Simple Boot Flag at 0x7c set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1236175417.524:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 973
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling
vesafb: framebuffer at 0xd8000000, mapped to 0xdf780000, using 3072k, total 16192k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial 0000:00:1f.6: power state changed by ACPI to D0
serial 0000:00:1f.6: enabling device (0000 -> 0001)
serial 0000:00:1f.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
serial 0000:00:1f.6: PCI INT B disabled
brd: module loaded
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:01:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e100 0000:01:08.0: PME# disabled
e100: eth0: e100_probe: addr 0xcffff000, irq 20, MAC addr 00:08:0d:17:bf:f5
console [netcon0] enabled
netconsole: network logging started
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP bic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 268k freed
input: AT Translated Set 2 keyboard as /class/input/input0
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device1
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (58 C)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002)
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0x2c080000
uhci_hcd: USB Universal Host Controller Interface driver
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018e0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x24ca rev 0x03)
PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xbfa0-0xbfa7
    ide1: BM-DMA at 0xbfa8-0xbfaf
Probing IDE interface ide0...
Marking TSC unstable due to TSC halts in idle
hda: HTS541080G9AT00, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
Probing IDE interface ide1...
Clocksource tsc unstable (delta = -496610873 ns)
hdc: TOSHIBA DVD-ROM SD-R6112, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
SCSI subsystem initialized
libata version 3.00 loaded.
ide-gd driver 1.18
hda: max request size: 512KiB
ide-cd driver 5.00
hda: 156301488 sectors (80026 MB) w/7539KiB Cache, CHS=16383/255/63
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
ide-cd: hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
udevd version 125 started
input: Power Button (FF) as /class/input/input1
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input2
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
ACPI Warning (nspredef-0940): \_SB_.BAT1._BIF: Return Package type mismatch at index 12 - found Integer, expected String/Buffer [20081204]
ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [ADP1] (on-line)
Linux agpgart interface v0.103
acpi device:0f: registered as cooling_device2
input: Video Bus as /class/input/input4
ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
parport_pc 00:09: activated
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0xd860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
input: PC Speaker as /class/input/input5
agpgart-intel 0000:00:00.0: Intel 855GM Chipset
agpgart-intel 0000:00:00.0: detected 16252K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xd8000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, 114 bytes nvram
toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
toshiba_acpi:     HCI method: \_SB_.VALZ.GHCI
yenta_cardbus 0000:01:0b.0: CardBus bridge found [1179:0001]
yenta_cardbus 0000:01:0b.0: ISA IRQ mask 0x0c38, PCI irq 18
yenta_cardbus 0000:01:0b.0: Socket status: 30000020
yenta_cardbus 0000:01:0b.0: pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc000-0xcfff: clean.
yenta_cardbus 0000:01:0b.0: pcmcia: parent PCI bridge Memory window: 0xcff00000 - 0xcfffffff
yenta_cardbus 0000:01:0b.0: pcmcia: parent PCI bridge Memory window: 0x28000000 - 0x2bffffff
Intel ICH 0000:00:1f.5: power state changed by ACPI to D0
Intel ICH 0000:00:1f.5: enabling device (0000 -> 0003)
Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Intel ICH 0000:00:1f.5: setting latency timer to 64
input: PS/2 Mouse as /class/input/input6
input: AlpsPS/2 ALPS GlidePoint as /class/input/input7
pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
pci 0000:02:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: EU
	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
	(2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
	(5490000 KHz - 5710000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
ath5k 0000:02:00.0: enabling device (0000 -> 0002)
ath5k 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ath5k 0000:02:00.0: registered as 'phy0'
wmaster0 (ath5k): not using net_device_ops yet
phy0: Selected rate control algorithm 'minstrel'
wlan0 (ath5k): not using net_device_ops yet
ath5k phy0: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43)
ath5k phy0: RF2112B 2GHz radio found (0x46)
udev: renamed network interface wlan0 to ath0
intel8x0_measure_ac97_clock: measured 55377 usecs
intel8x0: clocking to 48000
Intel ICH Modem 0000:00:1f.6: power state changed by ACPI to D0
Intel ICH Modem 0000:00:1f.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
EXT3 FS on dm-1, internal journal
loop: module loaded
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1048568k swap on /dev/mapper/strider-swap_crypt.  Priority:-1 extents:1 across:1048568k 
ADDRCONF(NETDEV_UP): ath0: link is not ready
ath0: authenticate with AP 00:14:c1:38:e5:15
ath0: authenticated
ath0: associate with AP 00:14:c1:38:e5:15
ath0: RX AssocResp from 00:14:c1:38:e5:15 (capab=0x411 status=0 aid=2)
ath0: associated
ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
ADDRCONF(NETDEV_UP): eth0: link is not ready
ath0: no IPv6 routers present
ADDRCONF(NETDEV_UP): eth0: link is not ready
CPU0 attaching NULL sched-domain.
CPU0 attaching NULL sched-domain.

[-- Attachment #3: 2.6.29-rc7.patched --]
[-- Type: text/plain, Size: 24300 bytes --]

Linux version 2.6.29-rc7 (root@aragorn) (gcc version 4.3.3 (Debian 4.3.3-5) ) #10 SMP Wed Mar 4 20:32:19 CET 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
 BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
 BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001ef40000 (usable)
 BIOS-e820: 000000001ef40000 - 000000001ef50000 (ACPI data)
 BIOS-e820: 000000001ef50000 - 000000001f000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
 BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
DMI 2.3 present.
last_pfn = 0x1ef40 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 1ef40000 @ 7000-c000
RAMDISK: 1eb65000 - 1ef2f40f
ACPI: RSDP 000F0180, 0014 (r0 TOSHIB)
ACPI: RSDT 1EF40000, 0038 (r1 TOSHIB 750        970814 TASM  4010000)
ACPI: FACP 1EF40060, 0084 (r2 TOSHIB 750      20030101 TASM  4010000)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT 1EF40558, 4B72 (r1 TOSHIB A000C    20031216 MSFT  100000E)
ACPI: FACS 000EEE00, 0040
ACPI: SSDT 1EF402CA, 0082 (r1 TOSHIB A000C    20030917 MSFT  100000E)
ACPI: DBGP 1EF400E4, 0034 (r1 TOSHIB 750        970814 TASM  4010000)
ACPI: BOOT 1EF40038, 0028 (r1 TOSHIB 750        970814 TASM  4010000)
ACPI: APIC 1EF40118, 0062 (r1 TOSHIB 750        970814 TASM  4010000)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
495MB LOWMEM available.
  mapped low ram: 0 - 1ef40000
  low ram: 00000000 - 1ef40000
  bootmap 00002000 - 00005de8
(9 early reservations) ==> bootmem [0000000000 - 001ef40000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000100000 - 0000498804]    TEXT DATA BSS ==> [0000100000 - 0000498804]
  #4 [001eb65000 - 001ef2f40f]          RAMDISK ==> [001eb65000 - 001ef2f40f]
  #5 [0000499000 - 000049c000]    INIT_PG_TABLE ==> [0000499000 - 000049c000]
  #6 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
  #8 [0000002000 - 0000006000]          BOOTMAP ==> [0000002000 - 0000006000]
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x0001ef40
  HighMem  0x0001ef40 -> 0x0001ef40
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0001ef40
On node 0 totalpages: 126687
free_area_init_node: node 0, pgdat c03cf520, node_mem_map c1000000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3967 pages, LIFO batch:0
  Normal zone: 959 pages used for memmap
  Normal zone: 121729 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xd808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 00000000000ee000
PM: Registered nosave memory: 00000000000ee000 - 00000000000ef000
PM: Registered nosave memory: 00000000000ef000 - 0000000000100000
Allocating PCI resources starting at 20000000 (gap: 1f000000:dfc00000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Allocating 32768 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125696
Kernel command line: root=/dev/mapper/strider-root rootdelay=10 ro vga=791 quiet
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Fast TSC calibration using PIT
Detected 2793.051 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 494568k/507136k available (1860k kernel code, 12052k reserved, 1112k data, 268k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff51000 - 0xfffff000   ( 696 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xdf740000 - 0xff7fe000   ( 512 MB)
    lowmem  : 0xc0000000 - 0xdef40000   ( 495 MB)
      .init : 0xc03ef000 - 0xc0432000   ( 268 kB)
      .data : 0xc02d130d - 0xc03e75ec   (1112 kB)
      .text : 0xc0100000 - 0xc02d130d   (1860 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.10 BogoMIPS (lpj=11172204)
Security Framework initialized
SELinux:  Disabled at boot.
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
[ds] using Netburst configuration
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20081204
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Mobile Intel(R) Pentium(R) 4     CPU 2.80GHz stepping 09
Brought up 1 CPUs
Total of 1 processors activated (5586.10 BogoMIPS).
CPU0 attaching NULL sched-domain.
net_namespace: 996 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd2fe, last bus=3
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI Warning (dsobject-0502): Package List length (F) larger than NumElements count (2), truncated
 [20081204]
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff]
pci 0000:00:02.0: reg 14 32bit mmio: [0xd0000000-0xd007ffff]
pci 0000:00:02.0: reg 18 io port: [0xeff8-0xefff]
pci 0000:00:02.0: supports D1
pci 0000:00:02.1: reg 10 32bit mmio: [0x000000-0x7ffffff]
pci 0000:00:02.1: reg 14 32bit mmio: [0x000000-0x07ffff]
pci 0000:00:02.1: supports D1
pci 0000:00:1d.0: reg 20 io port: [0xcfe0-0xcfff]
pci 0000:00:1d.1: reg 20 io port: [0xcf80-0xcf9f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:1f.0: quirk: region d800-d87f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region eec0-eeff claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10 io port: [0xbff8-0xbfff]
pci 0000:00:1f.1: reg 14 io port: [0xbff4-0xbff7]
pci 0000:00:1f.1: reg 18 io port: [0xbfe8-0xbfef]
pci 0000:00:1f.1: reg 1c io port: [0xbfe4-0xbfe7]
pci 0000:00:1f.1: reg 20 io port: [0xbfa0-0xbfaf]
pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:1f.5: reg 10 io port: [0x00-0xff]
pci 0000:00:1f.5: reg 14 io port: [0x00-0x3f]
pci 0000:00:1f.5: reg 18 32bit mmio: [0x000000-0x0001ff]
pci 0000:00:1f.5: reg 1c 32bit mmio: [0x000000-0x0000ff]
pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.5: PME# disabled
pci 0000:00:1f.6: reg 10 io port: [0x00-0xff]
pci 0000:00:1f.6: reg 14 io port: [0x00-0x7f]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: PME# disabled
pci 0000:01:08.0: reg 10 32bit mmio: [0xcffff000-0xcfffffff]
pci 0000:01:08.0: reg 14 io port: [0xcf40-0xcf7f]
pci 0000:01:08.0: supports D1 D2
pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:08.0: PME# disabled
pci 0000:01:0b.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xcff00000-0xcfffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11)
ACPI: Power Resource [PFAN] (off)
PCI: Using ACPI for IRQ routing
pci 0000:00:1d.0: BAR 4: can't allocate resource
pci 0000:00:1d.1: BAR 4: can't allocate resource
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1d.0 BAR 4 (0x0-0x1f), disabling
pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1d.1 BAR 4 (0x0-0x1f), disabling
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xe0000-0xeffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x1ef3ffff could not be reserved
system 00:00: iomem range 0x1ef40000-0x1ef4ffff could not be reserved
system 00:00: iomem range 0x1ef50000-0x1effffff has been reserved
system 00:00: iomem range 0xfec10000-0xfec1ffff has been reserved
system 00:00: iomem range 0xfeda0000-0xfedbffff has been reserved
system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:00: iomem range 0xffe80000-0xffffffff has been reserved
system 00:08: ioport range 0x1e0-0x1ef has been reserved
system 00:08: ioport range 0x480-0x48f has been reserved
system 00:08: ioport range 0x680-0x6ff has been reserved
system 00:08: ioport range 0x800-0x80f has been reserved
system 00:08: ioport range 0xd800-0xd87f has been reserved
system 00:08: ioport range 0xd880-0xd89f has been reserved
system 00:08: ioport range 0xd8a0-0xd8bf has been reserved
system 00:08: ioport range 0xe000-0xe07f has been reserved
system 00:08: ioport range 0xe080-0xe0ff has been reserved
system 00:08: ioport range 0xe400-0xe47f has been reserved
system 00:08: ioport range 0xe480-0xe4ff has been reserved
system 00:08: ioport range 0xe800-0xe87f has been reserved
system 00:08: ioport range 0xe880-0xe8ff has been reserved
system 00:08: ioport range 0xec00-0xec7f has been reserved
system 00:08: ioport range 0xec80-0xecff has been reserved
system 00:08: ioport range 0xeeac-0xeeac has been reserved
system 00:08: ioport range 0xeeb0-0xeebf has been reserved
system 00:08: ioport range 0xeec0-0xeeff has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
pci 0000:01:0b.0: CardBus bridge, secondary bus 0000:02
pci 0000:01:0b.0:   IO window: 0x00c000-0x00c0ff
pci 0000:01:0b.0:   IO window: 0x00c400-0x00c4ff
pci 0000:01:0b.0:   PREFETCH window: 0x28000000-0x2bffffff
pci 0000:01:0b.0:   MEM window: 0x30000000-0x33ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1e.0:   IO window: 0xc000-0xcfff
pci 0000:00:1e.0:   MEM window: 0xcff00000-0xcfffffff
pci 0000:00:1e.0:   PREFETCH window: 0x00000028000000-0x0000002bffffff
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:01:0b.0: enabling device (0000 -> 0003)
pci 0000:01:0b.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io:  [0xc000-0xcfff]
pci_bus 0000:01: resource 1 mem: [0xcff00000-0xcfffffff]
pci_bus 0000:01: resource 2 mem: [0x28000000-0x2bffffff]
pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:02: resource 0 io:  [0xc000-0xc0ff]
pci_bus 0000:02: resource 1 io:  [0xc400-0xc4ff]
pci_bus 0000:02: resource 2 mem: [0x28000000-0x2bffffff]
pci_bus 0000:02: resource 3 mem: [0x30000000-0x33ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 3881k freed
Simple Boot Flag at 0x7c set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1236195728.528:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 973
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling
vesafb: framebuffer at 0xd8000000, mapped to 0xdf780000, using 3072k, total 16192k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial 0000:00:1f.6: power state changed by ACPI to D0
serial 0000:00:1f.6: enabling device (0000 -> 0001)
serial 0000:00:1f.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
serial 0000:00:1f.6: PCI INT B disabled
brd: module loaded
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:01:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e100 0000:01:08.0: PME# disabled
e100: eth0: e100_probe: addr 0xcffff000, irq 20, MAC addr 00:08:0d:17:bf:f5
console [netcon0] enabled
netconsole: network logging started
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP bic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 268k freed
input: AT Translated Set 2 keyboard as /class/input/input0
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device1
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (33 C)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002)
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0x2c080000
uhci_hcd: USB Universal Host Controller Interface driver
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018e0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x24ca rev 0x03)
PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xbfa0-0xbfa7
    ide1: BM-DMA at 0xbfa8-0xbfaf
Probing IDE interface ide0...
Marking TSC unstable due to TSC halts in idle
hda: HTS541080G9AT00, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
Probing IDE interface ide1...
Clocksource tsc unstable (delta = -496546074 ns)
hdc: TOSHIBA DVD-ROM SD-R6112, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
SCSI subsystem initialized
libata version 3.00 loaded.
ide-gd driver 1.18
hda: max request size: 512KiB
ide-cd driver 5.00
hda: 156301488 sectors (80026 MB) w/7539KiB Cache, CHS=16383/255/63
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
ide-cd: hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
udevd version 125 started
Linux agpgart interface v0.103
input: Power Button (FF) as /class/input/input1
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input2
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
ACPI: AC Adapter [ADP1] (on-line)
ACPI Warning (nspredef-0940): \_SB_.BAT1._BIF: Return Package type mismatch at index 12 - found Integer, expected String/Buffer [20081204]
ACPI: Battery Slot [BAT1] (battery present)
agpgart-intel 0000:00:00.0: Intel 855GM Chipset
agpgart-intel 0000:00:00.0: detected 16252K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xd8000000
acpi device:0f: registered as cooling_device2
input: Video Bus as /class/input/input4
ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
parport_pc 00:09: activated
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, 114 bytes nvram
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /class/input/input5
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0xd860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
toshiba_acpi:     HCI method: \_SB_.VALZ.GHCI
yenta_cardbus 0000:01:0b.0: CardBus bridge found [1179:0001]
yenta_cardbus 0000:01:0b.0: ISA IRQ mask 0x0c38, PCI irq 18
yenta_cardbus 0000:01:0b.0: Socket status: 30000020
yenta_cardbus 0000:01:0b.0: pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc000-0xcfff: clean.
yenta_cardbus 0000:01:0b.0: pcmcia: parent PCI bridge Memory window: 0xcff00000 - 0xcfffffff
yenta_cardbus 0000:01:0b.0: pcmcia: parent PCI bridge Memory window: 0x28000000 - 0x2bffffff
Intel ICH Modem 0000:00:1f.6: power state changed by ACPI to D0
Intel ICH Modem 0000:00:1f.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
Intel ICH 0000:00:1f.5: power state changed by ACPI to D0
Intel ICH 0000:00:1f.5: enabling device (0000 -> 0003)
Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Intel ICH 0000:00:1f.5: setting latency timer to 64
input: PS/2 Mouse as /class/input/input6
input: AlpsPS/2 ALPS GlidePoint as /class/input/input7
pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
pci 0000:02:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: EU
	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
	(2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
	(5490000 KHz - 5710000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
ath5k 0000:02:00.0: enabling device (0000 -> 0002)
ath5k 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ath5k 0000:02:00.0: registered as 'phy0'
wmaster0 (ath5k): not using net_device_ops yet
phy0: Selected rate control algorithm 'minstrel'
wlan0 (ath5k): not using net_device_ops yet
ath5k phy0: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43)
ath5k phy0: RF2112B 2GHz radio found (0x46)
udev: renamed network interface wlan0 to ath0
intel8x0_measure_ac97_clock: measured 55358 usecs
intel8x0: clocking to 48000
EXT3 FS on dm-1, internal journal
loop: module loaded
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1048568k swap on /dev/mapper/strider-swap_crypt.  Priority:-1 extents:1 across:1048568k 
ADDRCONF(NETDEV_UP): ath0: link is not ready
ath0: authenticate with AP 00:14:c1:38:e5:15
ath0: authenticated
ath0: associate with AP 00:14:c1:38:e5:15
ath0: RX AssocResp from 00:14:c1:38:e5:15 (capab=0x411 status=0 aid=2)
ath0: associated
ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
ath0: no IPv6 routers present
CPU0 attaching NULL sched-domain.
CPU0 attaching NULL sched-domain.

[Bug #11550] pnp: Huge number of "io resource overlap" messages

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.26 and 2.6.27.

The following bug entry is on the current list of known regressions
introduced between 2.6.26 and 2.6.27.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11550
Subject		: pnp: Huge number of "io resource overlap" messages
Submitter	: Frans Pop <elendil@planet.nl>
Date		: 2008-09-09 10:50 (55 days old)
References	: http://marc.info/?l=linux-kernel&m=122095745403793&w=4
Handled-By	: Rene Herman <rene.herman@keyaccess.nl>
		  Bjorn Helgaas <bjorn.helgaas@hp.com>
Patch		: http://marc.info/?l=linux-kernel&m=122246533505643&w=4

Re: [Bug #11550] pnp: Huge number of "io resource overlap" messages

[Frans Pop]

On Saturday 25 October 2008, Rafael J. Wysocki wrote:
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11550
> Subject	: pnp: Huge number of "io resource overlap" messages

AFAIK the issue should still be listed.

[Bug #11550] pnp: Huge number of "io resource overlap" messages

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.26 and 2.6.27.

The following bug entry is on the current list of known regressions
introduced between 2.6.26 and 2.6.27.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11550
Subject		: pnp: Huge number of "io resource overlap" messages
Submitter	: Frans Pop <elendil@planet.nl>
Date		: 2008-09-09 10:50 (47 days old)
References	: http://marc.info/?l=linux-kernel&m=122095745403793&w=4
Handled-By	: Rene Herman <rene.herman@keyaccess.nl>
		  Bjorn Helgaas <bjorn.helgaas@hp.com>
Patch		: http://marc.info/?l=linux-kernel&m=122246533505643&w=4

Re: [Bug #11550] pnp: Huge number of "io resource overlap" messages

[Frans Pop]

On Saturday 04 October 2008, Rafael J. Wysocki wrote:
> The following bug entry is on the current list of known regressions
> from 2.6.26.  Please verify if it still should be listed and let me
> know (either way).
>
>
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11550
> Subject	: pnp: Huge number of "io resource overlap" messages
> Submitter	: Frans Pop <elendil@planet.nl>
> Date		: 2008-09-09 10:50 (26 days old)
> References	: http://marc.info/?l=linux-kernel&m=122095745403793&w=4
> Handled-By	: Rene Herman <rene.herman@keyaccess.nl>
> 		  Bjorn Helgaas <bjorn.helgaas@hp.com>
> Patch		: http://marc.info/?l=linux-kernel&m=122246533505643&w=4

The structural patch for this from Bjorn got NACKed. AFAIK we're still 
waiting for someone (Bjorn?) to decide whether to go with a simpler patch 
from Rene for .27 and to push that.

For me it was possible to work around the issue by changing a BIOS 
setting, but I expect it will still affect others with similar BIOS 
behavior.

[Bug #11550] pnp: Huge number of "io resource overlap" messages

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11550
Subject		: pnp: Huge number of "io resource overlap" messages
Submitter	: Frans Pop <elendil@planet.nl>
Date		: 2008-09-09 10:50 (26 days old)
References	: http://marc.info/?l=linux-kernel&m=122095745403793&w=4
Handled-By	: Rene Herman <rene.herman@keyaccess.nl>
		  Bjorn Helgaas <bjorn.helgaas@hp.com>
Patch		: http://marc.info/?l=linux-kernel&m=122246533505643&w=4

Re: [Bug #11550] pnp: Huge number of "io resource overlap" messages

[Ingo Molnar]

* Bjorn Helgaas <bjorn.helgaas@hp.com> wrote:

> The problem seems to be that Frans has some PCI devices that are not 
> configured by the BIOS, and their BARs contain zero.  A PNP quirk 
> checks for overlaps of PCI devices and PNP devices, and those zero- 
> valued BARs of course conflict with the PNP motherboard devices that 
> describe legacy hardware.
> 
> Here's another approach based on section 3.5 of the PCI Firmware spec.
> It says:
> 
>   Since not all devices may be configured prior to the operating
>   system handoff, the operating system needs to know whether a
>   specific BAR register has been configured by firmware. The operating
>   system makes the determination by checking the I/O Enable, and
>   Memory Enable bits in the device's command register, and Expansion
>   ROM BAR enable bits. If the enable bit is set, then the corresponding
>   resource register has been configured.
> 
> So instead of checking whether the BAR contains zero, the patch below
> checks the I/O, Mem, and ROM BAR enable bits to determine whether a
> BAR is enabled.

cool! Looks like a pretty significant fix, for all sorts of legacy 
devices. Worth backporting?

	Ingo

Re: [Bug #11550] pnp: Huge number of "io resource overlap" messages

[Frans Pop]

On Friday 26 September 2008, Bjorn Helgaas wrote:
> Here's another approach based on section 3.5 of the PCI Firmware spec.
> It says:
>
>   Since not all devices may be configured prior to the operating
>   system handoff, the operating system needs to know whether a
>   specific BAR register has been configured by firmware. The operating
>   system makes the determination by checking the I/O Enable, and
>   Memory Enable bits in the device's command register, and Expansion
>   ROM BAR enable bits. If the enable bit is set, then the corresponding
>   resource register has been configured.
>
> So instead of checking whether the BAR contains zero, the patch below
> checks the I/O, Mem, and ROM BAR enable bits to determine whether a
> BAR is enabled.

That seems to nicely match what the BIOS setting does on my laptop.

> Frans, I'm sorry to trouble you again, but could you test this and
> make sure it takes care of the "resource overlap" messages you saw?

No problem at all. Works correctly (applied on top of current git).
I don't see any unexpected changes in the dmesg output, so:

Tested-by: Frans Pop <elendil@planet.nl>

Cheers,
FJP

[Bug #11550] pnp: Huge number of "io resource overlap" messages

[Bjorn Helgaas]

http://bugzilla.kernel.org/show_bug.cgi?id=11550

On Saturday 20 September 2008 05:56:24 pm Bjorn Helgaas wrote:
> > > On Tuesday 09 September 2008 12:31:09 pm Rene Herman wrote:
> > > > On 09-09-08 19:40, Bjorn Helgaas wrote:
> > > > > If the PCI device isn't fully initialized, it doesn't seem right to
> > > > > check it for resource conflicts.  But I don't know how to tell
> > > > > that.
> > > >
> > > > His pci_resource_start() values are 0. How about just checking for
> > > > that?

> ...
> I am still not 100% comfortable with this because I think we really
> want to know whether the BAR value is zero, not whether the CPU
> address is zero, and pci_resource_start() gives us the CPU address.
> 
> Bus and CPU addresses are currently identical on x86, but I expect
> that will change someday.  They're already different on ia64 and
> some other architectures.

The problem seems to be that Frans has some PCI devices that are not
configured by the BIOS, and their BARs contain zero.  A PNP quirk
checks for overlaps of PCI devices and PNP devices, and those zero-
valued BARs of course conflict with the PNP motherboard devices that
describe legacy hardware.

Here's another approach based on section 3.5 of the PCI Firmware spec.
It says:

  Since not all devices may be configured prior to the operating
  system handoff, the operating system needs to know whether a
  specific BAR register has been configured by firmware. The operating
  system makes the determination by checking the I/O Enable, and
  Memory Enable bits in the device's command register, and Expansion
  ROM BAR enable bits. If the enable bit is set, then the corresponding
  resource register has been configured.

So instead of checking whether the BAR contains zero, the patch below
checks the I/O, Mem, and ROM BAR enable bits to determine whether a
BAR is enabled.

Frans, I'm sorry to trouble you again, but could you test this and
make sure it takes care of the "resource overlap" messages you saw?

diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 1a5fc83..26195c3 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -26,6 +26,28 @@
 #include "pci.h"
 
 
+int pci_resource_enabled(struct pci_dev *dev, int bar)
+{
+	u16 command = 0;
+	u32 addr = 0;
+
+	pci_read_config_word(dev, PCI_COMMAND, &command);
+
+	if (pci_resource_flags(dev, bar) & IORESOURCE_IO)
+		return command & PCI_COMMAND_IO;
+
+	if (command & PCI_COMMAND_MEMORY) {
+		if (bar == PCI_ROM_RESOURCE) {
+			pci_read_config_dword(dev, dev->rom_base_reg, &addr);
+			return addr & PCI_ROM_ADDRESS_ENABLE;
+		}
+
+		return 1;
+	}
+
+	return 0;
+}
+
 void pci_update_resource(struct pci_dev *dev, struct resource *res, int resno)
 {
 	struct pci_bus_region region;
diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c
index 0bdf9b8..ef5ed99 100644
--- a/drivers/pnp/quirks.c
+++ b/drivers/pnp/quirks.c
@@ -247,6 +247,9 @@ static void quirk_system_pci_resources(struct pnp_dev *dev)
 		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
 			unsigned int type;
 
+			if (!pci_resource_enabled(pdev, i))
+				continue;
+
 			type = pci_resource_flags(pdev, i) &
 					(IORESOURCE_IO | IORESOURCE_MEM);
 			if (!type || pci_resource_len(pdev, i) == 0)
diff --git a/include/linux/pci.h b/include/linux/pci.h
index c0e1400..28ec520 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -796,6 +796,8 @@ static inline int pci_proc_domain(struct pci_bus *bus)
 }
 #endif /* CONFIG_PCI_DOMAINS */
 
+extern int pci_resource_enabled(struct pci_dev *dev, int bar);
+
 #else /* CONFIG_PCI is not enabled */
 
 /*
@@ -976,6 +978,9 @@ static inline struct pci_dev *pci_get_bus_and_slot(unsigned int bus,
 						unsigned int devfn)
 { return NULL; }
 
+static inline int pci_resource_enabled(struct pci_dev *dev, int bar)
+{ return 0; }
+
 #endif /* CONFIG_PCI */
 
 /* Include architecture-dependent settings and functions */

[Bug #11550] pnp: Huge number of "io resource overlap" messages

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11550
Subject		: pnp: Huge number of "io resource overlap" messages
Submitter	: Frans Pop <elendil@planet.nl>
Date		: 2008-09-09 10:50 (13 days old)
References	: http://marc.info/?l=linux-kernel&m=122095745403793&w=4
Handled-By	: Rene Herman <rene.herman@keyaccess.nl>
		  Bjorn Helgaas <bjorn.helgaas@hp.com>
Patch		: http://marc.info/?l=linux-kernel&m=122098498125536&w=4

Re: [Bug #11550] pnp: Huge number of "io resource overlap" messages

[Rene Herman]

On 12-09-08 21:06, Rafael J. Wysocki wrote:

> This message has been generated automatically as a part of a report
> of recent regressions.
> 
> The following bug entry is on the current list of known regressions
> from 2.6.26.  Please verify if it still should be listed and let me know
> (either way).
> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11550
> Subject		: pnp: Huge number of "io resource overlap" messages
> Submitter	: Frans Pop <elendil@planet.nl>
> Date		: 2008-09-09 10:50 (4 days old)
> References	: http://marc.info/?l=linux-kernel&m=122095745403793&w=4
> Handled-By	: Rene Herman <rene.herman@keyaccess.nl>
> 		  Bjorn Helgaas <bjorn.helgaas@hp.com>
> Patch		: http://marc.info/?l=linux-kernel&m=122098498125536&w=4

It should be. The patch listed should be good as far as I'm concerned 
but needs to be pushed by Bjorn as PnP mainatainer. Generally speaking 0 
wouldn't be a _very_ necesarily invalid value it seems so it's maybe not 
very nice.

If someone wants a changelog though, this should do:

===
PNP: avoid checking unitialized BARs for conflicts

Avoid checking a PCI BAR for conflicts if the BIOS left it unitialized.

Reported-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Rene Herman <rene.herman@gmail.com>
===

(Frans: Tested-by?)

Rene.

[Bug #11550] pnp: Huge number of "io resource overlap" messages

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11550
Subject		: pnp: Huge number of "io resource overlap" messages
Submitter	: Frans Pop <elendil@planet.nl>
Date		: 2008-09-09 10:50 (4 days old)
References	: http://marc.info/?l=linux-kernel&m=122095745403793&w=4
Handled-By	: Rene Herman <rene.herman@keyaccess.nl>
		  Bjorn Helgaas <bjorn.helgaas@hp.com>
Patch		: http://marc.info/?l=linux-kernel&m=122098498125536&w=4