Re: [PATCH 22/22] xlink-core: factorize xlink_ioctl function by creating sub-functions for each ioctl command

Re: [PATCH 22/22] xlink-core: factorize xlink_ioctl function by creating sub-functions for each ioctl command

[Greg Kroah-Hartman]

On Wed, Nov 25, 2020 at 10:43:49AM -0800, mgross@linux.intel.com wrote:
> From: Seamus Kelly <seamus.kelly@intel.com>
> 
> Refactor the too large IOCTL function to call helper functions.
> 
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Reviewed-by: Mark Gross <mgross@linux.intel.com>
> Signed-off-by: Seamus Kelly <seamus.kelly@intel.com>

<snip>

What are these random patch sets that don't seem to be showing up on
lore.kernel.org and I don't get the full series, nor any understanding
what is going on?

Are you sending only partial sets out for some reason?

thanks,

greg k-h

[PATCH 00/22] Intel Vision Processing Unit base enabling part 1

[mgross]

From: mark gross <mgross@linux.intel.com>

The Intel Vision Processing Unit (VPU) is an IP block that is showing up for
the first time as part of the Keem Bay SOC.  Keem Bay is a quad core A53 Arm
SOC.  It is designed to be used as a stand alone SOC as well as in an PCIe
Vision Processing accelerator add in card.

This part 1 of the patches make up the base or core of the stack needed to
enable both use cases for the VPU.

Part 2 includes 11 more patches that depend on part 1.  Those should be ready
in a couple of weeks or less.

I am trying something a bit new with this sequence where I've been working with
the driver developers as a "pre-maintainer" reviewing and enforcing the kernel
expectations as I understand them.  Its taken a couple of months to get this
code to the point I feel its ready for public posting.  My goal is to make sure
it meets expectations for quality and compliance with kernel expectations and
there will be mostly technical / design issues to talk about.

Thanks for looking at these and providing feedback.

--mark
p.s. I have had a problem my MTA configuration between mutt and git send-email
where I was using msmpt to send from mutt (because 15+ years ago its the first
way I got to work and never changed) while my worstation MTA that git
send-email uses was un-configured resulting in my return-path naming my
workstion withing the firewall.  I suck at email administration.

I appologies for the multiple copies.


Daniele Alessandrelli (2):
  dt-bindings: Add bindings for Keem Bay IPC driver
  keembay-ipc: Add Keem Bay IPC module

Paul Murphy (2):
  dt-bindings: Add bindings for Keem Bay VPU IPC driver
  keembay-vpu-ipc: Add Keem Bay VPU IPC module

Seamus Kelly (8):
  xlink-ipc: Add xlink ipc device tree bindings
  xlink-ipc: Add xlink ipc driver
  xlink-core: Add xlink core device tree bindings
  xlink-core: Add xlink core driver xLink
  xlink-core: Enable xlink protocol over pcie
  xlink-core: Enable VPU IP management and runtime control
  xlink-core: add async channel and events
  xlink-core: factorize xlink_ioctl function by creating sub-functions
    for each ioctl command

Srikanth Thokala (9):
  misc: xlink-pcie: Add documentation for XLink PCIe driver
  misc: xlink-pcie: lh: Add PCIe EPF driver for Local Host
  misc: xlink-pcie: lh: Add PCIe EP DMA functionality
  misc: xlink-pcie: lh: Add core communication logic
  misc: xlink-pcie: lh: Prepare changes for adding remote host driver
  misc: xlink-pcie: rh: Add PCIe EP driver for Remote Host
  misc: xlink-pcie: rh: Add core communication logic
  misc: xlink-pcie: Add XLink API interface
  misc: xlink-pcie: Add asynchronous event notification support for
    XLink

mark gross (1):
  Add Vision Processing Unit (VPU) documentation.

 .../misc/intel,keembay-xlink-ipc.yaml         |   49 +
 .../bindings/misc/intel,keembay-xlink.yaml    |   27 +
 .../bindings/soc/intel/intel,keembay-ipc.yaml |   63 +
 .../soc/intel/intel,keembay-vpu-ipc.yaml      |  151 ++
 Documentation/index.rst                       |    3 +-
 Documentation/vpu/index.rst                   |   19 +
 Documentation/vpu/vpu-stack-overview.rst      |  267 +++
 Documentation/vpu/xlink-core.rst              |   80 +
 Documentation/vpu/xlink-ipc.rst               |   50 +
 Documentation/vpu/xlink-pcie.rst              |   91 +
 MAINTAINERS                                   |   41 +
 drivers/misc/Kconfig                          |    3 +
 drivers/misc/Makefile                         |    3 +
 drivers/misc/xlink-core/Kconfig               |   33 +
 drivers/misc/xlink-core/Makefile              |    5 +
 drivers/misc/xlink-core/xlink-core.c          | 1335 +++++++++++
 drivers/misc/xlink-core/xlink-core.h          |   24 +
 drivers/misc/xlink-core/xlink-defs.h          |  181 ++
 drivers/misc/xlink-core/xlink-dispatcher.c    |  436 ++++
 drivers/misc/xlink-core/xlink-dispatcher.h    |   26 +
 drivers/misc/xlink-core/xlink-ioctl.c         |  584 +++++
 drivers/misc/xlink-core/xlink-ioctl.h         |   36 +
 drivers/misc/xlink-core/xlink-multiplexer.c   | 1164 ++++++++++
 drivers/misc/xlink-core/xlink-multiplexer.h   |   35 +
 drivers/misc/xlink-core/xlink-platform.c      |  273 +++
 drivers/misc/xlink-core/xlink-platform.h      |   65 +
 drivers/misc/xlink-ipc/Kconfig                |    7 +
 drivers/misc/xlink-ipc/Makefile               |    4 +
 drivers/misc/xlink-ipc/xlink-ipc.c            |  879 +++++++
 drivers/misc/xlink-pcie/Kconfig               |   20 +
 drivers/misc/xlink-pcie/Makefile              |    2 +
 drivers/misc/xlink-pcie/common/core.h         |  247 ++
 drivers/misc/xlink-pcie/common/interface.c    |  126 +
 drivers/misc/xlink-pcie/common/util.c         |  375 +++
 drivers/misc/xlink-pcie/common/util.h         |   70 +
 drivers/misc/xlink-pcie/common/xpcie.h        |  120 +
 drivers/misc/xlink-pcie/local_host/Makefile   |    6 +
 drivers/misc/xlink-pcie/local_host/core.c     |  905 ++++++++
 drivers/misc/xlink-pcie/local_host/dma.c      |  577 +++++
 drivers/misc/xlink-pcie/local_host/epf.c      |  523 +++++
 drivers/misc/xlink-pcie/local_host/epf.h      |  106 +
 drivers/misc/xlink-pcie/remote_host/Makefile  |    6 +
 drivers/misc/xlink-pcie/remote_host/core.c    |  647 ++++++
 drivers/misc/xlink-pcie/remote_host/main.c    |   96 +
 drivers/misc/xlink-pcie/remote_host/pci.c     |  525 +++++
 drivers/misc/xlink-pcie/remote_host/pci.h     |   67 +
 drivers/soc/Kconfig                           |    1 +
 drivers/soc/Makefile                          |    1 +
 drivers/soc/intel/Kconfig                     |   32 +
 drivers/soc/intel/Makefile                    |    5 +
 drivers/soc/intel/keembay-ipc.c               | 1669 ++++++++++++++
 drivers/soc/intel/keembay-vpu-ipc.c           | 2036 +++++++++++++++++
 include/linux/soc/intel/keembay-ipc.h         |   30 +
 include/linux/soc/intel/keembay-vpu-ipc.h     |   62 +
 include/linux/xlink-ipc.h                     |   48 +
 include/linux/xlink.h                         |  146 ++
 include/linux/xlink_drv_inf.h                 |   72 +
 include/uapi/misc/xlink_uapi.h                |  145 ++
 58 files changed, 14598 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/misc/intel,keembay-xlink-ipc.yaml
 create mode 100644 Documentation/devicetree/bindings/misc/intel,keembay-xlink.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/intel/intel,keembay-ipc.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/intel/intel,keembay-vpu-ipc.yaml
 create mode 100644 Documentation/vpu/index.rst
 create mode 100644 Documentation/vpu/vpu-stack-overview.rst
 create mode 100644 Documentation/vpu/xlink-core.rst
 create mode 100644 Documentation/vpu/xlink-ipc.rst
 create mode 100644 Documentation/vpu/xlink-pcie.rst
 create mode 100644 drivers/misc/xlink-core/Kconfig
 create mode 100644 drivers/misc/xlink-core/Makefile
 create mode 100644 drivers/misc/xlink-core/xlink-core.c
 create mode 100644 drivers/misc/xlink-core/xlink-core.h
 create mode 100644 drivers/misc/xlink-core/xlink-defs.h
 create mode 100644 drivers/misc/xlink-core/xlink-dispatcher.c
 create mode 100644 drivers/misc/xlink-core/xlink-dispatcher.h
 create mode 100644 drivers/misc/xlink-core/xlink-ioctl.c
 create mode 100644 drivers/misc/xlink-core/xlink-ioctl.h
 create mode 100644 drivers/misc/xlink-core/xlink-multiplexer.c
 create mode 100644 drivers/misc/xlink-core/xlink-multiplexer.h
 create mode 100644 drivers/misc/xlink-core/xlink-platform.c
 create mode 100644 drivers/misc/xlink-core/xlink-platform.h
 create mode 100644 drivers/misc/xlink-ipc/Kconfig
 create mode 100644 drivers/misc/xlink-ipc/Makefile
 create mode 100644 drivers/misc/xlink-ipc/xlink-ipc.c
 create mode 100644 drivers/misc/xlink-pcie/Kconfig
 create mode 100644 drivers/misc/xlink-pcie/Makefile
 create mode 100644 drivers/misc/xlink-pcie/common/core.h
 create mode 100644 drivers/misc/xlink-pcie/common/interface.c
 create mode 100644 drivers/misc/xlink-pcie/common/util.c
 create mode 100644 drivers/misc/xlink-pcie/common/util.h
 create mode 100644 drivers/misc/xlink-pcie/common/xpcie.h
 create mode 100644 drivers/misc/xlink-pcie/local_host/Makefile
 create mode 100644 drivers/misc/xlink-pcie/local_host/core.c
 create mode 100644 drivers/misc/xlink-pcie/local_host/dma.c
 create mode 100644 drivers/misc/xlink-pcie/local_host/epf.c
 create mode 100644 drivers/misc/xlink-pcie/local_host/epf.h
 create mode 100644 drivers/misc/xlink-pcie/remote_host/Makefile
 create mode 100644 drivers/misc/xlink-pcie/remote_host/core.c
 create mode 100644 drivers/misc/xlink-pcie/remote_host/main.c
 create mode 100644 drivers/misc/xlink-pcie/remote_host/pci.c
 create mode 100644 drivers/misc/xlink-pcie/remote_host/pci.h
 create mode 100644 drivers/soc/intel/Kconfig
 create mode 100644 drivers/soc/intel/Makefile
 create mode 100644 drivers/soc/intel/keembay-ipc.c
 create mode 100644 drivers/soc/intel/keembay-vpu-ipc.c
 create mode 100644 include/linux/soc/intel/keembay-ipc.h
 create mode 100644 include/linux/soc/intel/keembay-vpu-ipc.h
 create mode 100644 include/linux/xlink-ipc.h
 create mode 100644 include/linux/xlink.h
 create mode 100644 include/linux/xlink_drv_inf.h
 create mode 100644 include/uapi/misc/xlink_uapi.h

-- 
2.17.1

[PATCH 22/22] xlink-core: factorize xlink_ioctl function by creating sub-functions for each ioctl command

[mgross]

From: Seamus Kelly <seamus.kelly@intel.com>

Refactor the too large IOCTL function to call helper functions.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Mark Gross <mgross@linux.intel.com>
Signed-off-by: Seamus Kelly <seamus.kelly@intel.com>
---
 drivers/misc/xlink-core/Makefile      |   2 +-
 drivers/misc/xlink-core/xlink-core.c  | 625 ++++++--------------------
 drivers/misc/xlink-core/xlink-core.h  |  24 +
 drivers/misc/xlink-core/xlink-defs.h  |   2 +-
 drivers/misc/xlink-core/xlink-ioctl.c | 584 ++++++++++++++++++++++++
 drivers/misc/xlink-core/xlink-ioctl.h |  36 ++
 6 files changed, 773 insertions(+), 500 deletions(-)
 create mode 100644 drivers/misc/xlink-core/xlink-core.h
 create mode 100644 drivers/misc/xlink-core/xlink-ioctl.c
 create mode 100644 drivers/misc/xlink-core/xlink-ioctl.h

diff --git a/drivers/misc/xlink-core/Makefile b/drivers/misc/xlink-core/Makefile
index 6e604c0b8962..2f64703301d6 100644
--- a/drivers/misc/xlink-core/Makefile
+++ b/drivers/misc/xlink-core/Makefile
@@ -2,4 +2,4 @@
 # Makefile for KeemBay xlink Linux driver
 #
 obj-$(CONFIG_XLINK_CORE) += xlink.o
-xlink-objs += xlink-core.o xlink-multiplexer.o xlink-dispatcher.o xlink-platform.o
+xlink-objs += xlink-core.o xlink-multiplexer.o xlink-dispatcher.o xlink-platform.o xlink-ioctl.o
diff --git a/drivers/misc/xlink-core/xlink-core.c b/drivers/misc/xlink-core/xlink-core.c
index 63f65def8aa9..ed2b37085851 100644
--- a/drivers/misc/xlink-core/xlink-core.c
+++ b/drivers/misc/xlink-core/xlink-core.c
@@ -20,9 +20,11 @@
 #endif
 
 #include "xlink-defs.h"
+#include "xlink-core.h"
 #include "xlink-dispatcher.h"
 #include "xlink-multiplexer.h"
 #include "xlink-platform.h"
+#include "xlink-ioctl.h"
 
 // xlink version number
 #define XLINK_VERSION_MAJOR		0
@@ -52,25 +54,7 @@ static struct class *dev_class;
 static struct cdev xlink_cdev;
 
 static long xlink_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
-static enum xlink_error xlink_write_data_user(struct xlink_handle *handle,
-					      u16 chan, u8 const *pmessage,
-					      u32 size);
 
-static enum xlink_error xlink_write_volatile_user(struct xlink_handle *handle,
-						  u16 chan, u8 const *message,
-						  u32 size);
-static enum xlink_error do_xlink_write_volatile(struct xlink_handle *handle,
-						u16 chan, u8 const *message,
-						u32 size, u32 user_flag);
-static enum xlink_error xlink_register_device_event_user(struct xlink_handle *handle,
-							 u32 *event_list,
-							 u32 num_events,
-							 xlink_device_event_cb event_notif_fn);
-static enum xlink_error do_xlink_register_device_event(struct xlink_handle *handle,
-						       u32 *event_list,
-						       u32 num_events,
-						       xlink_device_event_cb event_notif_fn,
-						       u32 user_flag);
 static struct mutex dev_event_lock;
 
 static const struct file_operations fops = {
@@ -105,9 +89,6 @@ struct event_info {
 	xlink_device_event_cb event_notif_fn;
 };
 
-static u8 volbuf[XLINK_MAX_BUF_SIZE]; // buffer for volatile transactions
-#define NUM_REG_EVENTS 4
-
 // sysfs attribute functions
 
 static ssize_t event0_show(struct device *dev, struct device_attribute *attr, char *buf)
@@ -342,427 +323,84 @@ static int kmb_xlink_remove(struct platform_device *pdev)
  * IOCTL function for User Space access to xlink kernel functions
  *
  */
+int ioctl_connect(unsigned long arg);
 
 static long xlink_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
-	struct xlink_handle		devh	= {0};
-	struct xlinkopenchannel		op	= {0};
-	struct xlinkwritedata		wr	= {0};
-	struct xlinkreaddata		rd	= {0};
-	struct xlinkreadtobuffer	rdtobuf = {0};
-	struct xlinkconnect		con	= {0};
-	struct xlinkrelease		rel	= {0};
-	struct xlinkstartvpu		startvpu = {0};
-	struct xlinkcallback		cb	= {0};
-	struct xlinkgetdevicename	devn	= {0};
-	struct xlinkgetdevicelist	devl	= {0};
-	struct xlinkgetdevicestatus	devs	= {0};
-	struct xlinkbootdevice		boot	= {0};
-	struct xlinkresetdevice		res	= {0};
-	struct xlinkdevmode		devm	= {0};
-	struct xlinkregdevevent		regdevevent = {0};
-	u32 sw_device_id_list[XLINK_MAX_DEVICE_LIST_SIZE];
-	char name[XLINK_MAX_DEVICE_NAME_SIZE];
-	int interface = NULL_INTERFACE;
-	u32 device_status = 0;
-	u32 num_devices = 0;
-	u32 device_mode = 0;
-	u32 num_events = 0;
-	char filename[64];
-	u32 *ev_list;
-	u8 reladdr;
-	u8 *rdaddr;
-	u32 size;
 	int rc;
 
 	switch (cmd) {
 	case XL_CONNECT:
-		if (copy_from_user(&con, (void __user *)arg,
-				   sizeof(struct xlinkconnect)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)con.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		rc = xlink_connect(&devh);
-		if (rc == X_LINK_SUCCESS) {
-			if (copy_to_user((void __user *)con.handle,
-					 &devh, sizeof(struct xlink_handle)))
-				return -EFAULT;
-		}
-		if (copy_to_user((void __user *)con.return_code, (void *)&rc,
-				 sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_connect(arg);
 		break;
 	case XL_OPEN_CHANNEL:
-		if (copy_from_user(&op, (void __user *)arg,
-				   sizeof(struct xlinkopenchannel)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)op.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		rc = xlink_open_channel(&devh, op.chan, op.mode, op.data_size,
-					op.timeout);
-		if (copy_to_user((void __user *)op.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_open_channel(arg);
 		break;
 	case XL_DATA_READY_CALLBACK:
-		if (copy_from_user(&cb, (void __user *)arg,
-				   sizeof(struct xlinkcallback)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)cb.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		CHANNEL_SET_USER_BIT(cb.chan); // set MSbit for user space call
-		rc = xlink_data_available_event(&devh, cb.chan, cb.callback);
-		if (copy_to_user((void __user *)cb.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_data_ready_callback(arg);
 		break;
 	case XL_DATA_CONSUMED_CALLBACK:
-		if (copy_from_user(&cb, (void __user *)arg,
-				   sizeof(struct xlinkcallback)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)cb.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		CHANNEL_SET_USER_BIT(cb.chan); // set MSbit for user space call
-		rc = xlink_data_consumed_event(&devh, cb.chan, cb.callback);
-		if (copy_to_user((void __user *)cb.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_data_consumed_callback(arg);
 		break;
 	case XL_READ_DATA:
-		if (copy_from_user(&rd, (void __user *)arg,
-				   sizeof(struct xlinkreaddata)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)rd.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		rc = xlink_read_data(&devh, rd.chan, &rdaddr, &size);
-		if (!rc) {
-			interface = get_interface_from_sw_device_id(devh.sw_device_id);
-			if (interface == IPC_INTERFACE) {
-				if (copy_to_user((void __user *)rd.pmessage, (void *)&rdaddr,
-						 sizeof(u32)))
-					return -EFAULT;
-			} else {
-				if (copy_to_user((void __user *)rd.pmessage, (void *)rdaddr,
-						 size))
-					return -EFAULT;
-			}
-			if (copy_to_user((void __user *)rd.size, (void *)&size, sizeof(size)))
-				return -EFAULT;
-		}
-		if (copy_to_user((void __user *)rd.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_read_data(arg);
 		break;
 	case XL_READ_TO_BUFFER:
-		if (copy_from_user(&rdtobuf, (void __user *)arg,
-				   sizeof(struct xlinkreadtobuffer)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)rdtobuf.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		rc = xlink_read_data_to_buffer(&devh, rdtobuf.chan,
-					       (u8 *)volbuf, &size);
-		if (!rc) {
-			if (copy_to_user((void __user *)rdtobuf.pmessage, (void *)volbuf,
-					 size))
-				return -EFAULT;
-			if (copy_to_user((void __user *)rdtobuf.size, (void *)&size,
-					 sizeof(size)))
-				return -EFAULT;
-		}
-		if (copy_to_user((void __user *)rdtobuf.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_read_to_buffer(arg);
 		break;
 	case XL_WRITE_DATA:
-		if (copy_from_user(&wr, (void __user *)arg,
-				   sizeof(struct xlinkwritedata)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)wr.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		if (wr.size <= XLINK_MAX_DATA_SIZE) {
-			rc = xlink_write_data_user(&devh, wr.chan, wr.pmessage,
-						   wr.size);
-			if (copy_to_user((void __user *)wr.return_code, (void *)&rc,
-					 sizeof(rc)))
-				return -EFAULT;
-		} else {
-			return -EFAULT;
-		}
+		rc = ioctl_write_data(arg);
 		break;
 	case XL_WRITE_VOLATILE:
-		if (copy_from_user(&wr, (void __user *)arg,
-				   sizeof(struct xlinkwritedata)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)wr.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		if (wr.size <= XLINK_MAX_BUF_SIZE) {
-			if (copy_from_user(volbuf, (void __user *)wr.pmessage,
-					   wr.size))
-				return -EFAULT;
-			rc = xlink_write_volatile_user(&devh, wr.chan, volbuf,
-						       wr.size);
-			if (copy_to_user((void __user *)wr.return_code, (void *)&rc,
-					 sizeof(rc)))
-				return -EFAULT;
-		} else {
-			return -EFAULT;
-		}
+		rc = ioctl_write_volatile_data(arg);
 		break;
 	case XL_WRITE_CONTROL_DATA:
-		if (copy_from_user(&wr, (void __user *)arg,
-				   sizeof(struct xlinkwritedata)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)wr.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		if (wr.size <= XLINK_MAX_CONTROL_DATA_SIZE) {
-			if (copy_from_user(volbuf, (void __user *)wr.pmessage,
-					   wr.size))
-				return -EFAULT;
-			rc = xlink_write_control_data(&devh, wr.chan, volbuf,
-						      wr.size);
-			if (copy_to_user((void __user *)wr.return_code,
-					 (void *)&rc, sizeof(rc)))
-				return -EFAULT;
-		} else {
-			return -EFAULT;
-		}
+		rc = ioctl_write_control_data(arg);
 		break;
 	case XL_RELEASE_DATA:
-		if (copy_from_user(&rel, (void __user *)arg,
-				   sizeof(struct xlinkrelease)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)rel.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		if (rel.addr) {
-			if (get_user(reladdr, (u32 __user *const)rel.addr))
-				return -EFAULT;
-			rc = xlink_release_data(&devh, rel.chan,
-						(u8 *)&reladdr);
-		} else {
-			rc = xlink_release_data(&devh, rel.chan, NULL);
-		}
-		if (copy_to_user((void __user *)rel.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_release_data(arg);
 		break;
 	case XL_CLOSE_CHANNEL:
-		if (copy_from_user(&op, (void __user *)arg,
-				   sizeof(struct xlinkopenchannel)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)op.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		rc = xlink_close_channel(&devh, op.chan);
-		if (copy_to_user((void __user *)op.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_close_channel(arg);
 		break;
 	case XL_START_VPU:
-		if (copy_from_user(&startvpu, (void __user *)arg,
-				   sizeof(struct xlinkstartvpu)))
-			return -EFAULT;
-		if (startvpu.namesize > sizeof(filename))
-			return -EINVAL;
-		memset(filename, 0, sizeof(filename));
-		if (copy_from_user(filename, (void __user *)startvpu.filename,
-				   startvpu.namesize))
-			return -EFAULT;
-		rc = xlink_start_vpu(filename);
-		if (copy_to_user((void __user *)startvpu.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_start_vpu(arg);
 		break;
 	case XL_STOP_VPU:
-		rc = xlink_stop_vpu();
+		rc = ioctl_stop_vpu();
 		break;
 	case XL_RESET_VPU:
-		rc = xlink_stop_vpu();
+		rc = ioctl_stop_vpu();
 		break;
 	case XL_DISCONNECT:
-		if (copy_from_user(&con, (void __user *)arg,
-				   sizeof(struct xlinkconnect)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)con.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		rc = xlink_disconnect(&devh);
-		if (copy_to_user((void __user *)con.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_disconnect(arg);
 		break;
 	case XL_GET_DEVICE_NAME:
-		if (copy_from_user(&devn, (void __user *)arg,
-				   sizeof(struct xlinkgetdevicename)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)devn.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		if (devn.name_size <= XLINK_MAX_DEVICE_NAME_SIZE) {
-			rc = xlink_get_device_name(&devh, name, devn.name_size);
-			if (!rc) {
-				if (copy_to_user((void __user *)devn.name, (void *)name,
-						 devn.name_size))
-					return -EFAULT;
-			}
-		} else {
-			rc = X_LINK_ERROR;
-		}
-		if (copy_to_user((void __user *)devn.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_get_device_name(arg);
 		break;
 	case XL_GET_DEVICE_LIST:
-		if (copy_from_user(&devl, (void __user *)arg,
-				   sizeof(struct xlinkgetdevicelist)))
-			return -EFAULT;
-		rc = xlink_get_device_list(sw_device_id_list, &num_devices);
-		if (!rc && num_devices <= XLINK_MAX_DEVICE_LIST_SIZE) {
-			/* TODO: this next copy is dangerous! we have no idea
-			 * how large the devl.sw_device_id_list buffer is
-			 * provided by the user. if num_devices is too large,
-			 * the copy will overflow the buffer.
-			 */
-			if (copy_to_user((void __user *)devl.sw_device_id_list,
-					 (void *)sw_device_id_list,
-					 (sizeof(*sw_device_id_list)
-					 * num_devices)))
-				return -EFAULT;
-			if (copy_to_user((void __user *)devl.num_devices, (void *)&num_devices,
-					 (sizeof(num_devices))))
-				return -EFAULT;
-		}
-		if (copy_to_user((void __user *)devl.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_get_device_list(arg);
 		break;
 	case XL_GET_DEVICE_STATUS:
-		if (copy_from_user(&devs, (void __user *)arg,
-				   sizeof(struct xlinkgetdevicestatus)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)devs.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		rc = xlink_get_device_status(&devh, &device_status);
-		if (!rc) {
-			if (copy_to_user((void __user *)devs.device_status,
-					 (void *)&device_status,
-					 sizeof(device_status)))
-				return -EFAULT;
-		}
-		if (copy_to_user((void __user *)devs.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_get_device_status(arg);
 		break;
 	case XL_BOOT_DEVICE:
-		if (copy_from_user(&boot, (void __user *)arg,
-				   sizeof(struct xlinkbootdevice)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)boot.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		if (boot.binary_name_size > sizeof(filename))
-			return -EINVAL;
-		memset(filename, 0, sizeof(filename));
-		if (copy_from_user(filename, (void __user *)boot.binary_name,
-				   boot.binary_name_size))
-			return -EFAULT;
-		rc = xlink_boot_device(&devh, filename);
-		if (copy_to_user((void __user *)boot.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_boot_device(arg);
 		break;
 	case XL_RESET_DEVICE:
-		if (copy_from_user(&res, (void __user *)arg,
-				   sizeof(struct xlinkresetdevice)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)res.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		rc = xlink_reset_device(&devh);
-		if (copy_to_user((void __user *)res.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_reset_device(arg);
 		break;
 	case XL_GET_DEVICE_MODE:
-		if (copy_from_user(&devm, (void __user *)arg,
-				   sizeof(struct xlinkdevmode)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)devm.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		rc = xlink_get_device_mode(&devh, &device_mode);
-		if (!rc) {
-			if (copy_to_user((void __user *)devm.device_mode, (void *)&device_mode,
-					 sizeof(device_mode)))
-				return -EFAULT;
-		}
-		if (copy_to_user((void __user *)devm.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_get_device_mode(arg);
 		break;
 	case XL_SET_DEVICE_MODE:
-		if (copy_from_user(&devm, (void __user *)arg,
-				   sizeof(struct xlinkdevmode)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)devm.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		if (copy_from_user(&device_mode, (void __user *)devm.device_mode,
-				   sizeof(device_mode)))
-			return -EFAULT;
-		rc = xlink_set_device_mode(&devh, device_mode);
-		if (copy_to_user((void __user *)devm.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_set_device_mode(arg);
 		break;
 	case XL_REGISTER_DEV_EVENT:
-		if (copy_from_user(&regdevevent, (void __user *)arg,
-				   sizeof(struct xlinkregdevevent)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)regdevevent.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		num_events = regdevevent.num_events;
-		if (num_events > 0 && num_events <= NUM_REG_EVENTS) {
-			ev_list = kzalloc((num_events * sizeof(u32)), GFP_KERNEL);
-			if (ev_list) {
-				if (copy_from_user(ev_list,
-						   (void __user *)regdevevent.event_list,
-						   (num_events * sizeof(u32)))) {
-					kfree(ev_list);
-					return -EFAULT;
-				}
-				rc = xlink_register_device_event_user(&devh,
-								      ev_list,
-								      num_events,
-								      NULL);
-				kfree(ev_list);
-			} else {
-				rc = X_LINK_ERROR;
-			}
-		} else {
-			rc = X_LINK_ERROR;
-		}
-		if (copy_to_user((void __user *)regdevevent.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_register_device_event(arg);
 		break;
 	case XL_UNREGISTER_DEV_EVENT:
-		if (copy_from_user(&regdevevent, (void __user *)arg,
-				   sizeof(struct xlinkregdevevent)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)regdevevent.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		num_events = regdevevent.num_events;
-		if (num_events <= NUM_REG_EVENTS) {
-			ev_list = kzalloc((num_events * sizeof(u32)), GFP_KERNEL);
-			if (copy_from_user(ev_list,
-					   (void __user *)regdevevent.event_list,
-					   (num_events * sizeof(u32)))) {
-				kfree(ev_list);
-				return -EFAULT;
-			}
-			rc = xlink_unregister_device_event(&devh, ev_list, num_events);
-			kfree(ev_list);
-		} else {
-			rc = X_LINK_ERROR;
-		}
-		if (copy_to_user((void __user *)regdevevent.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_unregister_device_event(arg);
 		break;
 	}
 	if (rc)
@@ -997,13 +635,16 @@ enum xlink_error xlink_close_channel(struct xlink_handle *handle,
 }
 EXPORT_SYMBOL(xlink_close_channel);
 
-enum xlink_error xlink_write_data(struct xlink_handle *handle,
-				  u16 chan, u8 const *pmessage, u32 size)
+static enum xlink_error do_xlink_write_data(struct xlink_handle *handle,
+					    u16 chan, u8 const *pmessage,
+					    u32 size, u32 user_flag)
 {
 	struct xlink_event *event;
 	struct xlink_link *link;
 	enum xlink_error rc;
 	int event_queued = 0;
+	dma_addr_t paddr = 0;
+	u32 addr;
 
 	if (!xlink || !handle)
 		return X_LINK_ERROR;
@@ -1019,88 +660,75 @@ enum xlink_error xlink_write_data(struct xlink_handle *handle,
 				   chan, size, 0);
 	if (!event)
 		return X_LINK_ERROR;
+	event->user_data = user_flag;
 
 	if (chan < XLINK_IPC_MAX_CHANNELS &&
 	    event->interface == IPC_INTERFACE) {
 		/* only passing message address across IPC interface */
-		event->data = &pmessage;
+		if (user_flag) {
+			if (get_user(addr, (u32 __user *)pmessage)) {
+				xlink_destroy_event(event);
+				return X_LINK_ERROR;
+			}
+			event->data = &addr;
+		} else {
+			event->data = &pmessage;
+		}
 		rc = xlink_multiplexer_tx(event, &event_queued);
 		xlink_destroy_event(event);
 	} else {
-		event->data = (u8 *)pmessage;
-		event->paddr = 0;
+		if (user_flag) {
+			event->data = xlink_platform_allocate(&xlink->pdev->dev, &paddr,
+							      size,
+							      XLINK_PACKET_ALIGNMENT,
+							      XLINK_NORMAL_MEMORY);
+			if (!event->data) {
+				xlink_destroy_event(event);
+				return X_LINK_ERROR;
+			}
+			if (copy_from_user(event->data, (void __user *)pmessage, size)) {
+				xlink_platform_deallocate(&xlink->pdev->dev,
+							  event->data, paddr, size,
+							  XLINK_PACKET_ALIGNMENT,
+							  XLINK_NORMAL_MEMORY);
+				xlink_destroy_event(event);
+				return X_LINK_ERROR;
+			}
+			event->paddr = paddr;
+		} else {
+			event->data = (u8 *)pmessage;
+			event->paddr = 0;
+		}
 		rc = xlink_multiplexer_tx(event, &event_queued);
-		if (!event_queued)
+		if (!event_queued) {
+			if (user_flag) {
+				xlink_platform_deallocate(&xlink->pdev->dev,
+							  event->data, paddr, size,
+							  XLINK_PACKET_ALIGNMENT,
+							  XLINK_NORMAL_MEMORY);
+			}
 			xlink_destroy_event(event);
+		}
 	}
 	return rc;
 }
-EXPORT_SYMBOL(xlink_write_data);
 
-static enum xlink_error xlink_write_data_user(struct xlink_handle *handle,
-					      u16 chan, u8 const *pmessage,
-					      u32 size)
+enum xlink_error xlink_write_data(struct xlink_handle *handle,
+				  u16 chan, u8 const *pmessage, u32 size)
 {
-	struct xlink_event *event;
-	struct xlink_link *link;
-	enum xlink_error rc;
-	int event_queued = 0;
-	dma_addr_t paddr = 0;
-	u32 addr;
-
-	if (!xlink || !handle)
-		return X_LINK_ERROR;
-
-	if (size > XLINK_MAX_DATA_SIZE)
-		return X_LINK_ERROR;
+	enum xlink_error rc = 0;
 
-	link = get_link_by_sw_device_id(handle->sw_device_id);
-	if (!link)
-		return X_LINK_ERROR;
+	rc = do_xlink_write_data(handle, chan, pmessage, size, 0);
+	return rc;
+}
+EXPORT_SYMBOL(xlink_write_data);
 
-	event = xlink_create_event(link->id, XLINK_WRITE_REQ, &link->handle,
-				   chan, size, 0);
-	if (!event)
-		return X_LINK_ERROR;
-	event->user_data = 1;
+enum xlink_error xlink_write_data_user(struct xlink_handle *handle,
+				       u16 chan, u8 const *pmessage, u32 size)
+{
+	enum xlink_error rc = 0;
 
-	if (chan < XLINK_IPC_MAX_CHANNELS &&
-	    event->interface == IPC_INTERFACE) {
-		/* only passing message address across IPC interface */
-		if (get_user(addr, (u32 __user *)pmessage)) {
-			xlink_destroy_event(event);
-			return X_LINK_ERROR;
-		}
-		event->data = &addr;
-		rc = xlink_multiplexer_tx(event, &event_queued);
-		xlink_destroy_event(event);
-	} else {
-		event->data = xlink_platform_allocate(&xlink->pdev->dev, &paddr,
-						      size,
-						      XLINK_PACKET_ALIGNMENT,
-						      XLINK_NORMAL_MEMORY);
-		if (!event->data) {
-			xlink_destroy_event(event);
-			return X_LINK_ERROR;
-		}
-		if (copy_from_user(event->data, (void __user *)pmessage, size)) {
-			xlink_platform_deallocate(&xlink->pdev->dev,
-						  event->data, paddr, size,
-						  XLINK_PACKET_ALIGNMENT,
-						  XLINK_NORMAL_MEMORY);
-			xlink_destroy_event(event);
-			return X_LINK_ERROR;
-		}
-		event->paddr = paddr;
-		rc = xlink_multiplexer_tx(event, &event_queued);
-		if (!event_queued) {
-			xlink_platform_deallocate(&xlink->pdev->dev,
-						  event->data, paddr, size,
-						  XLINK_PACKET_ALIGNMENT,
-						  XLINK_NORMAL_MEMORY);
-			xlink_destroy_event(event);
-		}
-	}
+	rc = do_xlink_write_data(handle, chan, pmessage, size, 1);
 	return rc;
 }
 
@@ -1131,25 +759,6 @@ enum xlink_error xlink_write_control_data(struct xlink_handle *handle,
 	return rc;
 }
 EXPORT_SYMBOL(xlink_write_control_data);
-static enum xlink_error xlink_write_volatile_user(struct xlink_handle *handle,
-						  u16 chan, u8 const *message,
-						  u32 size)
-{
-	enum xlink_error rc = 0;
-
-	rc = do_xlink_write_volatile(handle, chan, message, size, 1);
-	return rc;
-}
-
-enum xlink_error xlink_write_volatile(struct xlink_handle *handle,
-				      u16 chan, u8 const *message, u32 size)
-{
-	enum xlink_error rc = 0;
-
-	rc = do_xlink_write_volatile(handle, chan, message, size, 0);
-	return rc;
-}
-EXPORT_SYMBOL(xlink_write_volatile);
 
 static enum xlink_error do_xlink_write_volatile(struct xlink_handle *handle,
 						u16 chan, u8 const *message,
@@ -1196,6 +805,26 @@ static enum xlink_error do_xlink_write_volatile(struct xlink_handle *handle,
 	return rc;
 }
 
+enum xlink_error xlink_write_volatile_user(struct xlink_handle *handle,
+					   u16 chan, u8 const *message,
+					   u32 size)
+{
+	enum xlink_error rc = 0;
+
+	rc = do_xlink_write_volatile(handle, chan, message, size, 1);
+	return rc;
+}
+
+enum xlink_error xlink_write_volatile(struct xlink_handle *handle,
+				      u16 chan, u8 const *message, u32 size)
+{
+	enum xlink_error rc = 0;
+
+	rc = do_xlink_write_volatile(handle, chan, message, size, 0);
+	return rc;
+}
+EXPORT_SYMBOL(xlink_write_volatile);
+
 enum xlink_error xlink_read_data(struct xlink_handle *handle,
 				 u16 chan, u8 **pmessage, u32 *size)
 {
@@ -1531,29 +1160,6 @@ static bool event_registered(u32 sw_dev_id, u32 event)
 return false;
 }
 
-static enum xlink_error xlink_register_device_event_user(struct xlink_handle *handle,
-							 u32 *event_list, u32 num_events,
-							 xlink_device_event_cb event_notif_fn)
-{
-	enum xlink_error rc;
-
-	rc = do_xlink_register_device_event(handle, event_list, num_events,
-					    event_notif_fn, 1);
-	return rc;
-}
-
-enum xlink_error xlink_register_device_event(struct xlink_handle *handle,
-					     u32 *event_list, u32 num_events,
-					     xlink_device_event_cb event_notif_fn)
-{
-	enum xlink_error rc;
-
-	rc = do_xlink_register_device_event(handle, event_list, num_events,
-					    event_notif_fn, 0);
-	return rc;
-}
-EXPORT_SYMBOL(xlink_register_device_event);
-
 static enum xlink_error do_xlink_register_device_event(struct xlink_handle *handle,
 						       u32 *event_list,
 						       u32 num_events,
@@ -1599,6 +1205,29 @@ static enum xlink_error do_xlink_register_device_event(struct xlink_handle *hand
 	return X_LINK_SUCCESS;
 }
 
+enum xlink_error xlink_register_device_event_user(struct xlink_handle *handle,
+						  u32 *event_list, u32 num_events,
+						  xlink_device_event_cb event_notif_fn)
+{
+	enum xlink_error rc;
+
+	rc = do_xlink_register_device_event(handle, event_list, num_events,
+					    event_notif_fn, 1);
+	return rc;
+}
+
+enum xlink_error xlink_register_device_event(struct xlink_handle *handle,
+					     u32 *event_list, u32 num_events,
+					     xlink_device_event_cb event_notif_fn)
+{
+	enum xlink_error rc;
+
+	rc = do_xlink_register_device_event(handle, event_list, num_events,
+					    event_notif_fn, 0);
+	return rc;
+}
+EXPORT_SYMBOL(xlink_register_device_event);
+
 enum xlink_error xlink_unregister_device_event(struct xlink_handle *handle,
 					       u32 *event_list,
 					       u32 num_events)
diff --git a/drivers/misc/xlink-core/xlink-core.h b/drivers/misc/xlink-core/xlink-core.h
new file mode 100644
index 000000000000..c3d100a75c44
--- /dev/null
+++ b/drivers/misc/xlink-core/xlink-core.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * xlink core header file.
+ *
+ * Copyright (C) 2018-2019 Intel Corporation
+ *
+ */
+
+#ifndef XLINK_CORE_H_
+#define XLINK_CORE_H_
+#include "xlink-defs.h"
+
+#define NUM_REG_EVENTS 4
+
+enum xlink_error xlink_write_data_user(struct xlink_handle *handle,
+				       u16 chan, u8 const *pmessage,
+				       u32 size);
+enum xlink_error xlink_register_device_event_user(struct xlink_handle *handle,
+						  u32 *event_list, u32 num_events,
+						  xlink_device_event_cb event_notif_fn);
+enum xlink_error xlink_write_volatile_user(struct xlink_handle *handle,
+					   u16 chan, u8 const *message,
+					   u32 size);
+#endif /* XLINK_CORE_H_ */
diff --git a/drivers/misc/xlink-core/xlink-defs.h b/drivers/misc/xlink-core/xlink-defs.h
index df686e5185c5..81aa3bfffcd3 100644
--- a/drivers/misc/xlink-core/xlink-defs.h
+++ b/drivers/misc/xlink-core/xlink-defs.h
@@ -35,7 +35,7 @@
 #define CONTROL_CHANNEL_TIMEOUT_MS	0U	// wait indefinitely
 #define SIGXLNK				44	// signal XLink uses for callback signalling
 
-#define UNUSED(x) (void)(x)
+#define UNUSED(x) ((void)(x))
 
 // the end of the IPC channel range (starting at zero)
 #define XLINK_IPC_MAX_CHANNELS	1024
diff --git a/drivers/misc/xlink-core/xlink-ioctl.c b/drivers/misc/xlink-core/xlink-ioctl.c
new file mode 100644
index 000000000000..9c1a8c896945
--- /dev/null
+++ b/drivers/misc/xlink-core/xlink-ioctl.c
@@ -0,0 +1,584 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * xlink Core Driver.
+ *
+ * Copyright (C) 2018-2019 Intel Corporation
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/platform_device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/kref.h>
+
+#include "xlink-defs.h"
+#include "xlink-core.h"
+#include "xlink-ioctl.h"
+
+#define CHANNEL_SET_USER_BIT(chan) ((chan) |= (1 << 15))
+
+int ioctl_connect(unsigned long arg)
+{
+	struct xlink_handle		devh	= {0};
+	struct xlinkconnect		con	= {0};
+	int rc = 0;
+
+	if (copy_from_user(&con, (void __user *)arg,
+			   sizeof(struct xlinkconnect)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)con.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	rc = xlink_connect(&devh);
+	if (rc == X_LINK_SUCCESS) {
+		if (copy_to_user((void __user *)con.handle,
+				 &devh, sizeof(struct xlink_handle)))
+			return -EFAULT;
+	}
+	if (copy_to_user((void __user *)con.return_code, (void *)&rc,
+			 sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_open_channel(unsigned long arg)
+{
+	struct xlink_handle	devh	= {0};
+	struct xlinkopenchannel	op	= {0};
+	int rc = 0;
+
+	if (copy_from_user(&op, (void __user *)arg,
+			   sizeof(struct xlinkopenchannel)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)op.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	rc = xlink_open_channel(&devh, op.chan, op.mode, op.data_size,
+				op.timeout);
+	if (copy_to_user((void __user *)op.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_read_data(unsigned long arg)
+{
+	struct xlink_handle	devh	= {0};
+	struct xlinkreaddata	rd	= {0};
+	int rc = 0;
+	u8 *rdaddr;
+	u32 size;
+	int interface;
+
+	if (copy_from_user(&rd, (void __user *)arg,
+			   sizeof(struct xlinkreaddata)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)rd.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	rc = xlink_read_data(&devh, rd.chan, &rdaddr, &size);
+	if (!rc) {
+		interface = get_interface_from_sw_device_id(devh.sw_device_id);
+		if (interface == IPC_INTERFACE) {
+			if (copy_to_user((void __user *)rd.pmessage, (void *)&rdaddr,
+					 sizeof(u32)))
+				return -EFAULT;
+		} else {
+			if (copy_to_user((void __user *)rd.pmessage, (void *)rdaddr,
+					 size))
+				return -EFAULT;
+		}
+		if (copy_to_user((void __user *)rd.size, (void *)&size, sizeof(size)))
+			return -EFAULT;
+	}
+	if (copy_to_user((void __user *)rd.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_read_to_buffer(unsigned long arg)
+{
+	struct xlink_handle		devh	= {0};
+	struct xlinkreadtobuffer	rdtobuf = {0};
+	int rc = 0;
+	u32 size;
+	u8 volbuf[XLINK_MAX_BUF_SIZE]; // buffer for volatile transactions
+
+	if (copy_from_user(&rdtobuf, (void __user *)arg,
+			   sizeof(struct xlinkreadtobuffer)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)rdtobuf.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	rc = xlink_read_data_to_buffer(&devh, rdtobuf.chan,
+				       (u8 *)volbuf, &size);
+	if (!rc) {
+		if (copy_to_user((void __user *)rdtobuf.pmessage, (void *)volbuf,
+				 size))
+			return -EFAULT;
+		if (copy_to_user((void __user *)rdtobuf.size, (void *)&size,
+				 sizeof(size)))
+			return -EFAULT;
+	}
+	if (copy_to_user((void __user *)rdtobuf.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_write_data(unsigned long arg)
+{
+	struct xlink_handle	devh	= {0};
+	struct xlinkwritedata		wr	= {0};
+	int rc = 0;
+
+	if (copy_from_user(&wr, (void __user *)arg,
+			   sizeof(struct xlinkwritedata)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)wr.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	if (wr.size <= XLINK_MAX_DATA_SIZE) {
+		rc = xlink_write_data_user(&devh, wr.chan, wr.pmessage,
+					   wr.size);
+		if (copy_to_user((void __user *)wr.return_code, (void *)&rc,
+				 sizeof(rc)))
+			return -EFAULT;
+	} else {
+		return -EFAULT;
+	}
+	return rc;
+}
+
+int ioctl_write_control_data(unsigned long arg)
+{
+	struct xlink_handle	devh	= {0};
+	struct xlinkwritedata		wr	= {0};
+	u8 volbuf[XLINK_MAX_BUF_SIZE];
+	int rc = 0;
+
+	if (copy_from_user(&wr, (void __user *)arg,
+			   sizeof(struct xlinkwritedata)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)wr.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	if (wr.size <= XLINK_MAX_CONTROL_DATA_SIZE) {
+		if (copy_from_user(volbuf, (void __user *)wr.pmessage,
+				   wr.size))
+			return -EFAULT;
+		rc = xlink_write_control_data(&devh, wr.chan, volbuf,
+					      wr.size);
+		if (copy_to_user((void __user *)wr.return_code,
+				 (void *)&rc, sizeof(rc)))
+			return -EFAULT;
+	} else {
+		return -EFAULT;
+	}
+	return rc;
+}
+
+int ioctl_write_volatile_data(unsigned long arg)
+{
+	struct xlink_handle	devh	= {0};
+	struct xlinkwritedata	wr	= {0};
+	int rc = 0;
+	u8 volbuf[XLINK_MAX_BUF_SIZE]; // buffer for volatile transactions
+
+	if (copy_from_user(&wr, (void __user *)arg,
+			   sizeof(struct xlinkwritedata)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)wr.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	if (wr.size <= XLINK_MAX_BUF_SIZE) {
+		if (copy_from_user(volbuf, (void __user *)wr.pmessage,
+				   wr.size))
+			return -EFAULT;
+		rc = xlink_write_volatile_user(&devh, wr.chan, volbuf,
+					       wr.size);
+		if (copy_to_user((void __user *)wr.return_code, (void *)&rc,
+				 sizeof(rc)))
+			return -EFAULT;
+	} else {
+		return -EFAULT;
+	}
+	return rc;
+}
+
+int ioctl_release_data(unsigned long arg)
+{
+	struct xlink_handle	devh	= {0};
+	struct xlinkrelease	rel	= {0};
+	int rc = 0;
+	u8 reladdr;
+
+	if (copy_from_user(&rel, (void __user *)arg,
+			   sizeof(struct xlinkrelease)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)rel.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	if (rel.addr) {
+		if (get_user(reladdr, (u32 __user *const)rel.addr))
+			return -EFAULT;
+		rc = xlink_release_data(&devh, rel.chan,
+					(u8 *)&reladdr);
+	} else {
+		rc = xlink_release_data(&devh, rel.chan, NULL);
+	}
+	if (copy_to_user((void __user *)rel.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_close_channel(unsigned long arg)
+{
+	struct xlink_handle	devh	= {0};
+	struct xlinkopenchannel		op	= {0};
+	int rc = 0;
+
+	if (copy_from_user(&op, (void __user *)arg,
+			   sizeof(struct xlinkopenchannel)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)op.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	rc = xlink_close_channel(&devh, op.chan);
+	if (copy_to_user((void __user *)op.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_start_vpu(unsigned long arg)
+{
+	struct xlinkstartvpu		startvpu = {0};
+	char filename[64];
+	int rc = 0;
+
+	if (copy_from_user(&startvpu, (void __user *)arg,
+			   sizeof(struct xlinkstartvpu)))
+		return -EFAULT;
+	if (startvpu.namesize > sizeof(filename))
+		return -EINVAL;
+	memset(filename, 0, sizeof(filename));
+	if (copy_from_user(filename, (void __user *)startvpu.filename,
+			   startvpu.namesize))
+		return -EFAULT;
+	rc = xlink_start_vpu(filename);
+	if (copy_to_user((void __user *)startvpu.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_stop_vpu(void)
+{
+	int rc = 0;
+
+	rc = xlink_stop_vpu();
+	return rc;
+}
+
+int ioctl_disconnect(unsigned long arg)
+{
+	struct xlink_handle		devh	= {0};
+	struct xlinkconnect		con	= {0};
+	int rc = 0;
+
+	if (copy_from_user(&con, (void __user *)arg,
+			   sizeof(struct xlinkconnect)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)con.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	rc = xlink_disconnect(&devh);
+	if (copy_to_user((void __user *)con.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_get_device_name(unsigned long arg)
+{
+	struct xlink_handle		devh	= {0};
+	struct xlinkgetdevicename	devn	= {0};
+	char name[XLINK_MAX_DEVICE_NAME_SIZE];
+	int rc = 0;
+
+	if (copy_from_user(&devn, (void __user *)arg,
+			   sizeof(struct xlinkgetdevicename)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)devn.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	if (devn.name_size <= XLINK_MAX_DEVICE_NAME_SIZE) {
+		rc = xlink_get_device_name(&devh, name, devn.name_size);
+		if (!rc) {
+			if (copy_to_user((void __user *)devn.name, (void *)name,
+					 devn.name_size))
+				return -EFAULT;
+		}
+	} else {
+		rc = X_LINK_ERROR;
+	}
+	if (copy_to_user((void __user *)devn.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_get_device_list(unsigned long arg)
+{
+	struct xlinkgetdevicelist	devl	= {0};
+	u32 sw_device_id_list[XLINK_MAX_DEVICE_LIST_SIZE];
+	u32 num_devices = 0;
+	int rc = 0;
+
+	if (copy_from_user(&devl, (void __user *)arg,
+			   sizeof(struct xlinkgetdevicelist)))
+		return -EFAULT;
+	rc = xlink_get_device_list(sw_device_id_list, &num_devices);
+	if (!rc && num_devices <= XLINK_MAX_DEVICE_LIST_SIZE) {
+		/* TODO: this next copy is dangerous! we have no idea
+		 * how large the devl.sw_device_id_list buffer is
+		 * provided by the user. if num_devices is too large,
+		 * the copy will overflow the buffer.
+		 */
+		if (copy_to_user((void __user *)devl.sw_device_id_list,
+				 (void *)sw_device_id_list,
+				 (sizeof(*sw_device_id_list)
+				 * num_devices)))
+			return -EFAULT;
+		if (copy_to_user((void __user *)devl.num_devices, (void *)&num_devices,
+				 (sizeof(num_devices))))
+			return -EFAULT;
+	}
+	if (copy_to_user((void __user *)devl.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_get_device_status(unsigned long arg)
+{
+	struct xlink_handle		devh	= {0};
+	struct xlinkgetdevicestatus	devs	= {0};
+	u32 device_status = 0;
+	int rc = 0;
+
+	if (copy_from_user(&devs, (void __user *)arg,
+			   sizeof(struct xlinkgetdevicestatus)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)devs.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	rc = xlink_get_device_status(&devh, &device_status);
+	if (!rc) {
+		if (copy_to_user((void __user *)devs.device_status,
+				 (void *)&device_status,
+				 sizeof(device_status)))
+			return -EFAULT;
+	}
+	if (copy_to_user((void __user *)devs.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_boot_device(unsigned long arg)
+{
+	struct xlink_handle		devh	= {0};
+	struct xlinkbootdevice		boot	= {0};
+	char filename[64];
+	int rc = 0;
+
+	if (copy_from_user(&boot, (void __user *)arg,
+			   sizeof(struct xlinkbootdevice)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)boot.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	if (boot.binary_name_size > sizeof(filename))
+		return -EINVAL;
+	memset(filename, 0, sizeof(filename));
+	if (copy_from_user(filename, (void __user *)boot.binary_name,
+			   boot.binary_name_size))
+		return -EFAULT;
+	rc = xlink_boot_device(&devh, filename);
+	if (copy_to_user((void __user *)boot.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_reset_device(unsigned long arg)
+{
+	struct xlink_handle		devh	= {0};
+	struct xlinkresetdevice		res	= {0};
+	int rc = 0;
+
+	if (copy_from_user(&res, (void __user *)arg,
+			   sizeof(struct xlinkresetdevice)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)res.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	rc = xlink_reset_device(&devh);
+	if (copy_to_user((void __user *)res.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_get_device_mode(unsigned long arg)
+{
+	struct xlink_handle	devh	= {0};
+	struct xlinkdevmode	devm	= {0};
+	u32 device_mode = 0;
+	int rc = 0;
+
+	if (copy_from_user(&devm, (void __user *)arg,
+			   sizeof(struct xlinkdevmode)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)devm.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	rc = xlink_get_device_mode(&devh, &device_mode);
+	if (!rc) {
+		if (copy_to_user((void __user *)devm.device_mode, (void *)&device_mode,
+				 sizeof(device_mode)))
+			return -EFAULT;
+	}
+	if (copy_to_user((void __user *)devm.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_set_device_mode(unsigned long arg)
+{
+	struct xlink_handle	devh	= {0};
+	struct xlinkdevmode	devm	= {0};
+	u32 device_mode = 0;
+	int rc = 0;
+
+	if (copy_from_user(&devm, (void __user *)arg,
+			   sizeof(struct xlinkdevmode)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)devm.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	if (copy_from_user(&device_mode, (void __user *)devm.device_mode,
+			   sizeof(device_mode)))
+		return -EFAULT;
+	rc = xlink_set_device_mode(&devh, device_mode);
+	if (copy_to_user((void __user *)devm.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_register_device_event(unsigned long arg)
+{
+	struct xlink_handle	devh	= {0};
+	struct xlinkregdevevent	regdevevent = {0};
+	u32 num_events = 0;
+	u32 *ev_list;
+	int rc = 0;
+
+	if (copy_from_user(&regdevevent, (void __user *)arg,
+			   sizeof(struct xlinkregdevevent)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)regdevevent.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	num_events = regdevevent.num_events;
+	if (num_events > 0 && num_events <= NUM_REG_EVENTS) {
+		ev_list = kzalloc((num_events * sizeof(u32)), GFP_KERNEL);
+		if (ev_list) {
+			if (copy_from_user(ev_list,
+					   (void __user *)regdevevent.event_list,
+					   (num_events * sizeof(u32)))) {
+				kfree(ev_list);
+				return -EFAULT;
+			}
+			rc = xlink_register_device_event_user(&devh,
+							      ev_list,
+							      num_events,
+							      NULL);
+			kfree(ev_list);
+		} else {
+			rc = X_LINK_ERROR;
+		}
+	} else {
+		rc = X_LINK_ERROR;
+	}
+	if (copy_to_user((void __user *)regdevevent.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_unregister_device_event(unsigned long arg)
+{
+	struct xlink_handle	devh	= {0};
+	struct xlinkregdevevent	regdevevent = {0};
+	u32 num_events = 0;
+	u32 *ev_list;
+	int rc = 0;
+
+	if (copy_from_user(&regdevevent, (void __user *)arg,
+			   sizeof(struct xlinkregdevevent)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)regdevevent.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	num_events = regdevevent.num_events;
+	if (num_events <= NUM_REG_EVENTS) {
+		ev_list = kzalloc((num_events * sizeof(u32)), GFP_KERNEL);
+		if (copy_from_user(ev_list,
+				   (void __user *)regdevevent.event_list,
+				   (num_events * sizeof(u32)))) {
+			kfree(ev_list);
+			return -EFAULT;
+		}
+		rc = xlink_unregister_device_event(&devh, ev_list, num_events);
+		kfree(ev_list);
+	} else {
+		rc = X_LINK_ERROR;
+	}
+	if (copy_to_user((void __user *)regdevevent.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_data_ready_callback(unsigned long arg)
+{
+	struct xlink_handle	devh	= {0};
+	struct xlinkcallback	cb	= {0};
+	int rc = 0;
+
+	if (copy_from_user(&cb, (void __user *)arg,
+			   sizeof(struct xlinkcallback)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)cb.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	CHANNEL_SET_USER_BIT(cb.chan); // set MSbit for user space call
+	rc = xlink_data_available_event(&devh, cb.chan, cb.callback);
+	if (copy_to_user((void __user *)cb.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_data_consumed_callback(unsigned long arg)
+{
+	struct xlink_handle	devh	= {0};
+	struct xlinkcallback	cb	= {0};
+	int rc = 0;
+
+	if (copy_from_user(&cb, (void __user *)arg,
+			   sizeof(struct xlinkcallback)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)cb.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	CHANNEL_SET_USER_BIT(cb.chan); // set MSbit for user space call
+	rc = xlink_data_consumed_event(&devh, cb.chan, cb.callback);
+	if (copy_to_user((void __user *)cb.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
diff --git a/drivers/misc/xlink-core/xlink-ioctl.h b/drivers/misc/xlink-core/xlink-ioctl.h
new file mode 100644
index 000000000000..7818b676d488
--- /dev/null
+++ b/drivers/misc/xlink-core/xlink-ioctl.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * xlink ioctl header files.
+ *
+ * Copyright (C) 2018-2019 Intel Corporation
+ *
+ */
+
+#ifndef XLINK_IOCTL_H_
+#define XLINK_IOCTL_H_
+
+int ioctl_connect(unsigned long arg);
+int ioctl_open_channel(unsigned long arg);
+int ioctl_read_data(unsigned long arg);
+int ioctl_read_to_buffer(unsigned long arg);
+int ioctl_write_data(unsigned long arg);
+int ioctl_write_control_data(unsigned long arg);
+int ioctl_write_volatile_data(unsigned long arg);
+int ioctl_release_data(unsigned long arg);
+int ioctl_close_channel(unsigned long arg);
+int ioctl_start_vpu(unsigned long arg);
+int ioctl_stop_vpu(void);
+int ioctl_disconnect(unsigned long arg);
+int ioctl_get_device_name(unsigned long arg);
+int ioctl_get_device_list(unsigned long arg);
+int ioctl_get_device_status(unsigned long arg);
+int ioctl_boot_device(unsigned long arg);
+int ioctl_reset_device(unsigned long arg);
+int ioctl_get_device_mode(unsigned long arg);
+int ioctl_set_device_mode(unsigned long arg);
+int ioctl_register_device_event(unsigned long arg);
+int ioctl_unregister_device_event(unsigned long arg);
+int ioctl_data_ready_callback(unsigned long arg);
+int ioctl_data_consumed_callback(unsigned long arg);
+
+#endif /* XLINK_IOCTL_H_ */
-- 
2.17.1

[PATCH 00/22] Intel Vision Processing Unit base enabling part 1

[mgross]

From: mark gross <mgross@linux.intel.com>

The Intel Vision Processing Unit (VPU) is an IP block that is showing up for
the first time as part of the Keem Bay SOC.  Keem Bay is a quad core A53 Arm
SOC.  It is designed to be used as a stand alone SOC as well as in an PCIe
Vision Processing accelerator add in card.

This part 1 of the patches make up the base or core of the stack needed to
enable both use cases for the VPU.

Part 2 includes 11 more patches that depend on part 1.  Those should be ready
in a couple of weeks or less.

I am trying something a bit new with this sequence where I've been working with
the driver developers as a "pre-maintainer" reviewing and enforcing the kernel
expectations as I understand them.  Its taken a couple of months to get this
code to the point I feel its ready for public posting.  My goal is to make sure
it meets expectations for quality and compliance with kernel expectations and
there will be mostly technical / design issues to talk about.

Thanks for looking at these and providing feedback.

--mark
p.s. I have had a problem my MTA configuration between mutt and git send-email
where I was using msmpt to send from mutt (because 15+ years ago its the first
way I got to work and never changed) while my worstation MTA that git
send-email uses was un-configured resulting in my return-path naming my
workstion withing the firewall.  I suck at email administration.

I appologies for the multiple copies.

P.p.s.  corrected cc listings.

Daniele Alessandrelli (2):
  dt-bindings: Add bindings for Keem Bay IPC driver
  keembay-ipc: Add Keem Bay IPC module

Paul Murphy (2):
  dt-bindings: Add bindings for Keem Bay VPU IPC driver
  keembay-vpu-ipc: Add Keem Bay VPU IPC module

Seamus Kelly (8):
  xlink-ipc: Add xlink ipc device tree bindings
  xlink-ipc: Add xlink ipc driver
  xlink-core: Add xlink core device tree bindings
  xlink-core: Add xlink core driver xLink
  xlink-core: Enable xlink protocol over pcie
  xlink-core: Enable VPU IP management and runtime control
  xlink-core: add async channel and events
  xlink-core: factorize xlink_ioctl function by creating sub-functions
    for each ioctl command

Srikanth Thokala (9):
  misc: xlink-pcie: Add documentation for XLink PCIe driver
  misc: xlink-pcie: lh: Add PCIe EPF driver for Local Host
  misc: xlink-pcie: lh: Add PCIe EP DMA functionality
  misc: xlink-pcie: lh: Add core communication logic
  misc: xlink-pcie: lh: Prepare changes for adding remote host driver
  misc: xlink-pcie: rh: Add PCIe EP driver for Remote Host
  misc: xlink-pcie: rh: Add core communication logic
  misc: xlink-pcie: Add XLink API interface
  misc: xlink-pcie: Add asynchronous event notification support for
    XLink

mark gross (1):
  Add Vision Processing Unit (VPU) documentation.

 .../misc/intel,keembay-xlink-ipc.yaml         |   49 +
 .../bindings/misc/intel,keembay-xlink.yaml    |   27 +
 .../bindings/soc/intel/intel,keembay-ipc.yaml |   63 +
 .../soc/intel/intel,keembay-vpu-ipc.yaml      |  151 ++
 Documentation/index.rst                       |    3 +-
 Documentation/vpu/index.rst                   |   19 +
 Documentation/vpu/vpu-stack-overview.rst      |  267 +++
 Documentation/vpu/xlink-core.rst              |   80 +
 Documentation/vpu/xlink-ipc.rst               |   50 +
 Documentation/vpu/xlink-pcie.rst              |   91 +
 MAINTAINERS                                   |   41 +
 drivers/misc/Kconfig                          |    3 +
 drivers/misc/Makefile                         |    3 +
 drivers/misc/xlink-core/Kconfig               |   33 +
 drivers/misc/xlink-core/Makefile              |    5 +
 drivers/misc/xlink-core/xlink-core.c          | 1335 +++++++++++
 drivers/misc/xlink-core/xlink-core.h          |   24 +
 drivers/misc/xlink-core/xlink-defs.h          |  181 ++
 drivers/misc/xlink-core/xlink-dispatcher.c    |  436 ++++
 drivers/misc/xlink-core/xlink-dispatcher.h    |   26 +
 drivers/misc/xlink-core/xlink-ioctl.c         |  584 +++++
 drivers/misc/xlink-core/xlink-ioctl.h         |   36 +
 drivers/misc/xlink-core/xlink-multiplexer.c   | 1164 ++++++++++
 drivers/misc/xlink-core/xlink-multiplexer.h   |   35 +
 drivers/misc/xlink-core/xlink-platform.c      |  273 +++
 drivers/misc/xlink-core/xlink-platform.h      |   65 +
 drivers/misc/xlink-ipc/Kconfig                |    7 +
 drivers/misc/xlink-ipc/Makefile               |    4 +
 drivers/misc/xlink-ipc/xlink-ipc.c            |  879 +++++++
 drivers/misc/xlink-pcie/Kconfig               |   20 +
 drivers/misc/xlink-pcie/Makefile              |    2 +
 drivers/misc/xlink-pcie/common/core.h         |  247 ++
 drivers/misc/xlink-pcie/common/interface.c    |  126 +
 drivers/misc/xlink-pcie/common/util.c         |  375 +++
 drivers/misc/xlink-pcie/common/util.h         |   70 +
 drivers/misc/xlink-pcie/common/xpcie.h        |  120 +
 drivers/misc/xlink-pcie/local_host/Makefile   |    6 +
 drivers/misc/xlink-pcie/local_host/core.c     |  905 ++++++++
 drivers/misc/xlink-pcie/local_host/dma.c      |  577 +++++
 drivers/misc/xlink-pcie/local_host/epf.c      |  523 +++++
 drivers/misc/xlink-pcie/local_host/epf.h      |  106 +
 drivers/misc/xlink-pcie/remote_host/Makefile  |    6 +
 drivers/misc/xlink-pcie/remote_host/core.c    |  647 ++++++
 drivers/misc/xlink-pcie/remote_host/main.c    |   96 +
 drivers/misc/xlink-pcie/remote_host/pci.c     |  525 +++++
 drivers/misc/xlink-pcie/remote_host/pci.h     |   67 +
 drivers/soc/Kconfig                           |    1 +
 drivers/soc/Makefile                          |    1 +
 drivers/soc/intel/Kconfig                     |   32 +
 drivers/soc/intel/Makefile                    |    5 +
 drivers/soc/intel/keembay-ipc.c               | 1669 ++++++++++++++
 drivers/soc/intel/keembay-vpu-ipc.c           | 2036 +++++++++++++++++
 include/linux/soc/intel/keembay-ipc.h         |   30 +
 include/linux/soc/intel/keembay-vpu-ipc.h     |   62 +
 include/linux/xlink-ipc.h                     |   48 +
 include/linux/xlink.h                         |  146 ++
 include/linux/xlink_drv_inf.h                 |   72 +
 include/uapi/misc/xlink_uapi.h                |  145 ++
 58 files changed, 14598 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/misc/intel,keembay-xlink-ipc.yaml
 create mode 100644 Documentation/devicetree/bindings/misc/intel,keembay-xlink.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/intel/intel,keembay-ipc.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/intel/intel,keembay-vpu-ipc.yaml
 create mode 100644 Documentation/vpu/index.rst
 create mode 100644 Documentation/vpu/vpu-stack-overview.rst
 create mode 100644 Documentation/vpu/xlink-core.rst
 create mode 100644 Documentation/vpu/xlink-ipc.rst
 create mode 100644 Documentation/vpu/xlink-pcie.rst
 create mode 100644 drivers/misc/xlink-core/Kconfig
 create mode 100644 drivers/misc/xlink-core/Makefile
 create mode 100644 drivers/misc/xlink-core/xlink-core.c
 create mode 100644 drivers/misc/xlink-core/xlink-core.h
 create mode 100644 drivers/misc/xlink-core/xlink-defs.h
 create mode 100644 drivers/misc/xlink-core/xlink-dispatcher.c
 create mode 100644 drivers/misc/xlink-core/xlink-dispatcher.h
 create mode 100644 drivers/misc/xlink-core/xlink-ioctl.c
 create mode 100644 drivers/misc/xlink-core/xlink-ioctl.h
 create mode 100644 drivers/misc/xlink-core/xlink-multiplexer.c
 create mode 100644 drivers/misc/xlink-core/xlink-multiplexer.h
 create mode 100644 drivers/misc/xlink-core/xlink-platform.c
 create mode 100644 drivers/misc/xlink-core/xlink-platform.h
 create mode 100644 drivers/misc/xlink-ipc/Kconfig
 create mode 100644 drivers/misc/xlink-ipc/Makefile
 create mode 100644 drivers/misc/xlink-ipc/xlink-ipc.c
 create mode 100644 drivers/misc/xlink-pcie/Kconfig
 create mode 100644 drivers/misc/xlink-pcie/Makefile
 create mode 100644 drivers/misc/xlink-pcie/common/core.h
 create mode 100644 drivers/misc/xlink-pcie/common/interface.c
 create mode 100644 drivers/misc/xlink-pcie/common/util.c
 create mode 100644 drivers/misc/xlink-pcie/common/util.h
 create mode 100644 drivers/misc/xlink-pcie/common/xpcie.h
 create mode 100644 drivers/misc/xlink-pcie/local_host/Makefile
 create mode 100644 drivers/misc/xlink-pcie/local_host/core.c
 create mode 100644 drivers/misc/xlink-pcie/local_host/dma.c
 create mode 100644 drivers/misc/xlink-pcie/local_host/epf.c
 create mode 100644 drivers/misc/xlink-pcie/local_host/epf.h
 create mode 100644 drivers/misc/xlink-pcie/remote_host/Makefile
 create mode 100644 drivers/misc/xlink-pcie/remote_host/core.c
 create mode 100644 drivers/misc/xlink-pcie/remote_host/main.c
 create mode 100644 drivers/misc/xlink-pcie/remote_host/pci.c
 create mode 100644 drivers/misc/xlink-pcie/remote_host/pci.h
 create mode 100644 drivers/soc/intel/Kconfig
 create mode 100644 drivers/soc/intel/Makefile
 create mode 100644 drivers/soc/intel/keembay-ipc.c
 create mode 100644 drivers/soc/intel/keembay-vpu-ipc.c
 create mode 100644 include/linux/soc/intel/keembay-ipc.h
 create mode 100644 include/linux/soc/intel/keembay-vpu-ipc.h
 create mode 100644 include/linux/xlink-ipc.h
 create mode 100644 include/linux/xlink.h
 create mode 100644 include/linux/xlink_drv_inf.h
 create mode 100644 include/uapi/misc/xlink_uapi.h

-- 
2.17.1

[PATCH 22/22] xlink-core: factorize xlink_ioctl function by creating sub-functions for each ioctl command

[mgross]

From: Seamus Kelly <seamus.kelly@intel.com>

Refactor the too large IOCTL function to call helper functions.

Reviewed-by: Mark Gross <mgross@linux.intel.com>
Signed-off-by: Seamus Kelly <seamus.kelly@intel.com>
---
 drivers/misc/xlink-core/Makefile      |   2 +-
 drivers/misc/xlink-core/xlink-core.c  | 625 ++++++--------------------
 drivers/misc/xlink-core/xlink-core.h  |  24 +
 drivers/misc/xlink-core/xlink-defs.h  |   2 +-
 drivers/misc/xlink-core/xlink-ioctl.c | 584 ++++++++++++++++++++++++
 drivers/misc/xlink-core/xlink-ioctl.h |  36 ++
 6 files changed, 773 insertions(+), 500 deletions(-)
 create mode 100644 drivers/misc/xlink-core/xlink-core.h
 create mode 100644 drivers/misc/xlink-core/xlink-ioctl.c
 create mode 100644 drivers/misc/xlink-core/xlink-ioctl.h

diff --git a/drivers/misc/xlink-core/Makefile b/drivers/misc/xlink-core/Makefile
index 6e604c0b8962..2f64703301d6 100644
--- a/drivers/misc/xlink-core/Makefile
+++ b/drivers/misc/xlink-core/Makefile
@@ -2,4 +2,4 @@
 # Makefile for KeemBay xlink Linux driver
 #
 obj-$(CONFIG_XLINK_CORE) += xlink.o
-xlink-objs += xlink-core.o xlink-multiplexer.o xlink-dispatcher.o xlink-platform.o
+xlink-objs += xlink-core.o xlink-multiplexer.o xlink-dispatcher.o xlink-platform.o xlink-ioctl.o
diff --git a/drivers/misc/xlink-core/xlink-core.c b/drivers/misc/xlink-core/xlink-core.c
index 63f65def8aa9..ed2b37085851 100644
--- a/drivers/misc/xlink-core/xlink-core.c
+++ b/drivers/misc/xlink-core/xlink-core.c
@@ -20,9 +20,11 @@
 #endif
 
 #include "xlink-defs.h"
+#include "xlink-core.h"
 #include "xlink-dispatcher.h"
 #include "xlink-multiplexer.h"
 #include "xlink-platform.h"
+#include "xlink-ioctl.h"
 
 // xlink version number
 #define XLINK_VERSION_MAJOR		0
@@ -52,25 +54,7 @@ static struct class *dev_class;
 static struct cdev xlink_cdev;
 
 static long xlink_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
-static enum xlink_error xlink_write_data_user(struct xlink_handle *handle,
-					      u16 chan, u8 const *pmessage,
-					      u32 size);
 
-static enum xlink_error xlink_write_volatile_user(struct xlink_handle *handle,
-						  u16 chan, u8 const *message,
-						  u32 size);
-static enum xlink_error do_xlink_write_volatile(struct xlink_handle *handle,
-						u16 chan, u8 const *message,
-						u32 size, u32 user_flag);
-static enum xlink_error xlink_register_device_event_user(struct xlink_handle *handle,
-							 u32 *event_list,
-							 u32 num_events,
-							 xlink_device_event_cb event_notif_fn);
-static enum xlink_error do_xlink_register_device_event(struct xlink_handle *handle,
-						       u32 *event_list,
-						       u32 num_events,
-						       xlink_device_event_cb event_notif_fn,
-						       u32 user_flag);
 static struct mutex dev_event_lock;
 
 static const struct file_operations fops = {
@@ -105,9 +89,6 @@ struct event_info {
 	xlink_device_event_cb event_notif_fn;
 };
 
-static u8 volbuf[XLINK_MAX_BUF_SIZE]; // buffer for volatile transactions
-#define NUM_REG_EVENTS 4
-
 // sysfs attribute functions
 
 static ssize_t event0_show(struct device *dev, struct device_attribute *attr, char *buf)
@@ -342,427 +323,84 @@ static int kmb_xlink_remove(struct platform_device *pdev)
  * IOCTL function for User Space access to xlink kernel functions
  *
  */
+int ioctl_connect(unsigned long arg);
 
 static long xlink_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
-	struct xlink_handle		devh	= {0};
-	struct xlinkopenchannel		op	= {0};
-	struct xlinkwritedata		wr	= {0};
-	struct xlinkreaddata		rd	= {0};
-	struct xlinkreadtobuffer	rdtobuf = {0};
-	struct xlinkconnect		con	= {0};
-	struct xlinkrelease		rel	= {0};
-	struct xlinkstartvpu		startvpu = {0};
-	struct xlinkcallback		cb	= {0};
-	struct xlinkgetdevicename	devn	= {0};
-	struct xlinkgetdevicelist	devl	= {0};
-	struct xlinkgetdevicestatus	devs	= {0};
-	struct xlinkbootdevice		boot	= {0};
-	struct xlinkresetdevice		res	= {0};
-	struct xlinkdevmode		devm	= {0};
-	struct xlinkregdevevent		regdevevent = {0};
-	u32 sw_device_id_list[XLINK_MAX_DEVICE_LIST_SIZE];
-	char name[XLINK_MAX_DEVICE_NAME_SIZE];
-	int interface = NULL_INTERFACE;
-	u32 device_status = 0;
-	u32 num_devices = 0;
-	u32 device_mode = 0;
-	u32 num_events = 0;
-	char filename[64];
-	u32 *ev_list;
-	u8 reladdr;
-	u8 *rdaddr;
-	u32 size;
 	int rc;
 
 	switch (cmd) {
 	case XL_CONNECT:
-		if (copy_from_user(&con, (void __user *)arg,
-				   sizeof(struct xlinkconnect)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)con.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		rc = xlink_connect(&devh);
-		if (rc == X_LINK_SUCCESS) {
-			if (copy_to_user((void __user *)con.handle,
-					 &devh, sizeof(struct xlink_handle)))
-				return -EFAULT;
-		}
-		if (copy_to_user((void __user *)con.return_code, (void *)&rc,
-				 sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_connect(arg);
 		break;
 	case XL_OPEN_CHANNEL:
-		if (copy_from_user(&op, (void __user *)arg,
-				   sizeof(struct xlinkopenchannel)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)op.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		rc = xlink_open_channel(&devh, op.chan, op.mode, op.data_size,
-					op.timeout);
-		if (copy_to_user((void __user *)op.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_open_channel(arg);
 		break;
 	case XL_DATA_READY_CALLBACK:
-		if (copy_from_user(&cb, (void __user *)arg,
-				   sizeof(struct xlinkcallback)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)cb.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		CHANNEL_SET_USER_BIT(cb.chan); // set MSbit for user space call
-		rc = xlink_data_available_event(&devh, cb.chan, cb.callback);
-		if (copy_to_user((void __user *)cb.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_data_ready_callback(arg);
 		break;
 	case XL_DATA_CONSUMED_CALLBACK:
-		if (copy_from_user(&cb, (void __user *)arg,
-				   sizeof(struct xlinkcallback)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)cb.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		CHANNEL_SET_USER_BIT(cb.chan); // set MSbit for user space call
-		rc = xlink_data_consumed_event(&devh, cb.chan, cb.callback);
-		if (copy_to_user((void __user *)cb.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_data_consumed_callback(arg);
 		break;
 	case XL_READ_DATA:
-		if (copy_from_user(&rd, (void __user *)arg,
-				   sizeof(struct xlinkreaddata)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)rd.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		rc = xlink_read_data(&devh, rd.chan, &rdaddr, &size);
-		if (!rc) {
-			interface = get_interface_from_sw_device_id(devh.sw_device_id);
-			if (interface == IPC_INTERFACE) {
-				if (copy_to_user((void __user *)rd.pmessage, (void *)&rdaddr,
-						 sizeof(u32)))
-					return -EFAULT;
-			} else {
-				if (copy_to_user((void __user *)rd.pmessage, (void *)rdaddr,
-						 size))
-					return -EFAULT;
-			}
-			if (copy_to_user((void __user *)rd.size, (void *)&size, sizeof(size)))
-				return -EFAULT;
-		}
-		if (copy_to_user((void __user *)rd.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_read_data(arg);
 		break;
 	case XL_READ_TO_BUFFER:
-		if (copy_from_user(&rdtobuf, (void __user *)arg,
-				   sizeof(struct xlinkreadtobuffer)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)rdtobuf.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		rc = xlink_read_data_to_buffer(&devh, rdtobuf.chan,
-					       (u8 *)volbuf, &size);
-		if (!rc) {
-			if (copy_to_user((void __user *)rdtobuf.pmessage, (void *)volbuf,
-					 size))
-				return -EFAULT;
-			if (copy_to_user((void __user *)rdtobuf.size, (void *)&size,
-					 sizeof(size)))
-				return -EFAULT;
-		}
-		if (copy_to_user((void __user *)rdtobuf.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_read_to_buffer(arg);
 		break;
 	case XL_WRITE_DATA:
-		if (copy_from_user(&wr, (void __user *)arg,
-				   sizeof(struct xlinkwritedata)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)wr.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		if (wr.size <= XLINK_MAX_DATA_SIZE) {
-			rc = xlink_write_data_user(&devh, wr.chan, wr.pmessage,
-						   wr.size);
-			if (copy_to_user((void __user *)wr.return_code, (void *)&rc,
-					 sizeof(rc)))
-				return -EFAULT;
-		} else {
-			return -EFAULT;
-		}
+		rc = ioctl_write_data(arg);
 		break;
 	case XL_WRITE_VOLATILE:
-		if (copy_from_user(&wr, (void __user *)arg,
-				   sizeof(struct xlinkwritedata)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)wr.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		if (wr.size <= XLINK_MAX_BUF_SIZE) {
-			if (copy_from_user(volbuf, (void __user *)wr.pmessage,
-					   wr.size))
-				return -EFAULT;
-			rc = xlink_write_volatile_user(&devh, wr.chan, volbuf,
-						       wr.size);
-			if (copy_to_user((void __user *)wr.return_code, (void *)&rc,
-					 sizeof(rc)))
-				return -EFAULT;
-		} else {
-			return -EFAULT;
-		}
+		rc = ioctl_write_volatile_data(arg);
 		break;
 	case XL_WRITE_CONTROL_DATA:
-		if (copy_from_user(&wr, (void __user *)arg,
-				   sizeof(struct xlinkwritedata)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)wr.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		if (wr.size <= XLINK_MAX_CONTROL_DATA_SIZE) {
-			if (copy_from_user(volbuf, (void __user *)wr.pmessage,
-					   wr.size))
-				return -EFAULT;
-			rc = xlink_write_control_data(&devh, wr.chan, volbuf,
-						      wr.size);
-			if (copy_to_user((void __user *)wr.return_code,
-					 (void *)&rc, sizeof(rc)))
-				return -EFAULT;
-		} else {
-			return -EFAULT;
-		}
+		rc = ioctl_write_control_data(arg);
 		break;
 	case XL_RELEASE_DATA:
-		if (copy_from_user(&rel, (void __user *)arg,
-				   sizeof(struct xlinkrelease)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)rel.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		if (rel.addr) {
-			if (get_user(reladdr, (u32 __user *const)rel.addr))
-				return -EFAULT;
-			rc = xlink_release_data(&devh, rel.chan,
-						(u8 *)&reladdr);
-		} else {
-			rc = xlink_release_data(&devh, rel.chan, NULL);
-		}
-		if (copy_to_user((void __user *)rel.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_release_data(arg);
 		break;
 	case XL_CLOSE_CHANNEL:
-		if (copy_from_user(&op, (void __user *)arg,
-				   sizeof(struct xlinkopenchannel)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)op.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		rc = xlink_close_channel(&devh, op.chan);
-		if (copy_to_user((void __user *)op.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_close_channel(arg);
 		break;
 	case XL_START_VPU:
-		if (copy_from_user(&startvpu, (void __user *)arg,
-				   sizeof(struct xlinkstartvpu)))
-			return -EFAULT;
-		if (startvpu.namesize > sizeof(filename))
-			return -EINVAL;
-		memset(filename, 0, sizeof(filename));
-		if (copy_from_user(filename, (void __user *)startvpu.filename,
-				   startvpu.namesize))
-			return -EFAULT;
-		rc = xlink_start_vpu(filename);
-		if (copy_to_user((void __user *)startvpu.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_start_vpu(arg);
 		break;
 	case XL_STOP_VPU:
-		rc = xlink_stop_vpu();
+		rc = ioctl_stop_vpu();
 		break;
 	case XL_RESET_VPU:
-		rc = xlink_stop_vpu();
+		rc = ioctl_stop_vpu();
 		break;
 	case XL_DISCONNECT:
-		if (copy_from_user(&con, (void __user *)arg,
-				   sizeof(struct xlinkconnect)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)con.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		rc = xlink_disconnect(&devh);
-		if (copy_to_user((void __user *)con.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_disconnect(arg);
 		break;
 	case XL_GET_DEVICE_NAME:
-		if (copy_from_user(&devn, (void __user *)arg,
-				   sizeof(struct xlinkgetdevicename)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)devn.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		if (devn.name_size <= XLINK_MAX_DEVICE_NAME_SIZE) {
-			rc = xlink_get_device_name(&devh, name, devn.name_size);
-			if (!rc) {
-				if (copy_to_user((void __user *)devn.name, (void *)name,
-						 devn.name_size))
-					return -EFAULT;
-			}
-		} else {
-			rc = X_LINK_ERROR;
-		}
-		if (copy_to_user((void __user *)devn.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_get_device_name(arg);
 		break;
 	case XL_GET_DEVICE_LIST:
-		if (copy_from_user(&devl, (void __user *)arg,
-				   sizeof(struct xlinkgetdevicelist)))
-			return -EFAULT;
-		rc = xlink_get_device_list(sw_device_id_list, &num_devices);
-		if (!rc && num_devices <= XLINK_MAX_DEVICE_LIST_SIZE) {
-			/* TODO: this next copy is dangerous! we have no idea
-			 * how large the devl.sw_device_id_list buffer is
-			 * provided by the user. if num_devices is too large,
-			 * the copy will overflow the buffer.
-			 */
-			if (copy_to_user((void __user *)devl.sw_device_id_list,
-					 (void *)sw_device_id_list,
-					 (sizeof(*sw_device_id_list)
-					 * num_devices)))
-				return -EFAULT;
-			if (copy_to_user((void __user *)devl.num_devices, (void *)&num_devices,
-					 (sizeof(num_devices))))
-				return -EFAULT;
-		}
-		if (copy_to_user((void __user *)devl.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_get_device_list(arg);
 		break;
 	case XL_GET_DEVICE_STATUS:
-		if (copy_from_user(&devs, (void __user *)arg,
-				   sizeof(struct xlinkgetdevicestatus)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)devs.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		rc = xlink_get_device_status(&devh, &device_status);
-		if (!rc) {
-			if (copy_to_user((void __user *)devs.device_status,
-					 (void *)&device_status,
-					 sizeof(device_status)))
-				return -EFAULT;
-		}
-		if (copy_to_user((void __user *)devs.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_get_device_status(arg);
 		break;
 	case XL_BOOT_DEVICE:
-		if (copy_from_user(&boot, (void __user *)arg,
-				   sizeof(struct xlinkbootdevice)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)boot.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		if (boot.binary_name_size > sizeof(filename))
-			return -EINVAL;
-		memset(filename, 0, sizeof(filename));
-		if (copy_from_user(filename, (void __user *)boot.binary_name,
-				   boot.binary_name_size))
-			return -EFAULT;
-		rc = xlink_boot_device(&devh, filename);
-		if (copy_to_user((void __user *)boot.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_boot_device(arg);
 		break;
 	case XL_RESET_DEVICE:
-		if (copy_from_user(&res, (void __user *)arg,
-				   sizeof(struct xlinkresetdevice)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)res.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		rc = xlink_reset_device(&devh);
-		if (copy_to_user((void __user *)res.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_reset_device(arg);
 		break;
 	case XL_GET_DEVICE_MODE:
-		if (copy_from_user(&devm, (void __user *)arg,
-				   sizeof(struct xlinkdevmode)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)devm.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		rc = xlink_get_device_mode(&devh, &device_mode);
-		if (!rc) {
-			if (copy_to_user((void __user *)devm.device_mode, (void *)&device_mode,
-					 sizeof(device_mode)))
-				return -EFAULT;
-		}
-		if (copy_to_user((void __user *)devm.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_get_device_mode(arg);
 		break;
 	case XL_SET_DEVICE_MODE:
-		if (copy_from_user(&devm, (void __user *)arg,
-				   sizeof(struct xlinkdevmode)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)devm.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		if (copy_from_user(&device_mode, (void __user *)devm.device_mode,
-				   sizeof(device_mode)))
-			return -EFAULT;
-		rc = xlink_set_device_mode(&devh, device_mode);
-		if (copy_to_user((void __user *)devm.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_set_device_mode(arg);
 		break;
 	case XL_REGISTER_DEV_EVENT:
-		if (copy_from_user(&regdevevent, (void __user *)arg,
-				   sizeof(struct xlinkregdevevent)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)regdevevent.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		num_events = regdevevent.num_events;
-		if (num_events > 0 && num_events <= NUM_REG_EVENTS) {
-			ev_list = kzalloc((num_events * sizeof(u32)), GFP_KERNEL);
-			if (ev_list) {
-				if (copy_from_user(ev_list,
-						   (void __user *)regdevevent.event_list,
-						   (num_events * sizeof(u32)))) {
-					kfree(ev_list);
-					return -EFAULT;
-				}
-				rc = xlink_register_device_event_user(&devh,
-								      ev_list,
-								      num_events,
-								      NULL);
-				kfree(ev_list);
-			} else {
-				rc = X_LINK_ERROR;
-			}
-		} else {
-			rc = X_LINK_ERROR;
-		}
-		if (copy_to_user((void __user *)regdevevent.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_register_device_event(arg);
 		break;
 	case XL_UNREGISTER_DEV_EVENT:
-		if (copy_from_user(&regdevevent, (void __user *)arg,
-				   sizeof(struct xlinkregdevevent)))
-			return -EFAULT;
-		if (copy_from_user(&devh, (void __user *)regdevevent.handle,
-				   sizeof(struct xlink_handle)))
-			return -EFAULT;
-		num_events = regdevevent.num_events;
-		if (num_events <= NUM_REG_EVENTS) {
-			ev_list = kzalloc((num_events * sizeof(u32)), GFP_KERNEL);
-			if (copy_from_user(ev_list,
-					   (void __user *)regdevevent.event_list,
-					   (num_events * sizeof(u32)))) {
-				kfree(ev_list);
-				return -EFAULT;
-			}
-			rc = xlink_unregister_device_event(&devh, ev_list, num_events);
-			kfree(ev_list);
-		} else {
-			rc = X_LINK_ERROR;
-		}
-		if (copy_to_user((void __user *)regdevevent.return_code, (void *)&rc, sizeof(rc)))
-			return -EFAULT;
+		rc = ioctl_unregister_device_event(arg);
 		break;
 	}
 	if (rc)
@@ -997,13 +635,16 @@ enum xlink_error xlink_close_channel(struct xlink_handle *handle,
 }
 EXPORT_SYMBOL(xlink_close_channel);
 
-enum xlink_error xlink_write_data(struct xlink_handle *handle,
-				  u16 chan, u8 const *pmessage, u32 size)
+static enum xlink_error do_xlink_write_data(struct xlink_handle *handle,
+					    u16 chan, u8 const *pmessage,
+					    u32 size, u32 user_flag)
 {
 	struct xlink_event *event;
 	struct xlink_link *link;
 	enum xlink_error rc;
 	int event_queued = 0;
+	dma_addr_t paddr = 0;
+	u32 addr;
 
 	if (!xlink || !handle)
 		return X_LINK_ERROR;
@@ -1019,88 +660,75 @@ enum xlink_error xlink_write_data(struct xlink_handle *handle,
 				   chan, size, 0);
 	if (!event)
 		return X_LINK_ERROR;
+	event->user_data = user_flag;
 
 	if (chan < XLINK_IPC_MAX_CHANNELS &&
 	    event->interface == IPC_INTERFACE) {
 		/* only passing message address across IPC interface */
-		event->data = &pmessage;
+		if (user_flag) {
+			if (get_user(addr, (u32 __user *)pmessage)) {
+				xlink_destroy_event(event);
+				return X_LINK_ERROR;
+			}
+			event->data = &addr;
+		} else {
+			event->data = &pmessage;
+		}
 		rc = xlink_multiplexer_tx(event, &event_queued);
 		xlink_destroy_event(event);
 	} else {
-		event->data = (u8 *)pmessage;
-		event->paddr = 0;
+		if (user_flag) {
+			event->data = xlink_platform_allocate(&xlink->pdev->dev, &paddr,
+							      size,
+							      XLINK_PACKET_ALIGNMENT,
+							      XLINK_NORMAL_MEMORY);
+			if (!event->data) {
+				xlink_destroy_event(event);
+				return X_LINK_ERROR;
+			}
+			if (copy_from_user(event->data, (void __user *)pmessage, size)) {
+				xlink_platform_deallocate(&xlink->pdev->dev,
+							  event->data, paddr, size,
+							  XLINK_PACKET_ALIGNMENT,
+							  XLINK_NORMAL_MEMORY);
+				xlink_destroy_event(event);
+				return X_LINK_ERROR;
+			}
+			event->paddr = paddr;
+		} else {
+			event->data = (u8 *)pmessage;
+			event->paddr = 0;
+		}
 		rc = xlink_multiplexer_tx(event, &event_queued);
-		if (!event_queued)
+		if (!event_queued) {
+			if (user_flag) {
+				xlink_platform_deallocate(&xlink->pdev->dev,
+							  event->data, paddr, size,
+							  XLINK_PACKET_ALIGNMENT,
+							  XLINK_NORMAL_MEMORY);
+			}
 			xlink_destroy_event(event);
+		}
 	}
 	return rc;
 }
-EXPORT_SYMBOL(xlink_write_data);
 
-static enum xlink_error xlink_write_data_user(struct xlink_handle *handle,
-					      u16 chan, u8 const *pmessage,
-					      u32 size)
+enum xlink_error xlink_write_data(struct xlink_handle *handle,
+				  u16 chan, u8 const *pmessage, u32 size)
 {
-	struct xlink_event *event;
-	struct xlink_link *link;
-	enum xlink_error rc;
-	int event_queued = 0;
-	dma_addr_t paddr = 0;
-	u32 addr;
-
-	if (!xlink || !handle)
-		return X_LINK_ERROR;
-
-	if (size > XLINK_MAX_DATA_SIZE)
-		return X_LINK_ERROR;
+	enum xlink_error rc = 0;
 
-	link = get_link_by_sw_device_id(handle->sw_device_id);
-	if (!link)
-		return X_LINK_ERROR;
+	rc = do_xlink_write_data(handle, chan, pmessage, size, 0);
+	return rc;
+}
+EXPORT_SYMBOL(xlink_write_data);
 
-	event = xlink_create_event(link->id, XLINK_WRITE_REQ, &link->handle,
-				   chan, size, 0);
-	if (!event)
-		return X_LINK_ERROR;
-	event->user_data = 1;
+enum xlink_error xlink_write_data_user(struct xlink_handle *handle,
+				       u16 chan, u8 const *pmessage, u32 size)
+{
+	enum xlink_error rc = 0;
 
-	if (chan < XLINK_IPC_MAX_CHANNELS &&
-	    event->interface == IPC_INTERFACE) {
-		/* only passing message address across IPC interface */
-		if (get_user(addr, (u32 __user *)pmessage)) {
-			xlink_destroy_event(event);
-			return X_LINK_ERROR;
-		}
-		event->data = &addr;
-		rc = xlink_multiplexer_tx(event, &event_queued);
-		xlink_destroy_event(event);
-	} else {
-		event->data = xlink_platform_allocate(&xlink->pdev->dev, &paddr,
-						      size,
-						      XLINK_PACKET_ALIGNMENT,
-						      XLINK_NORMAL_MEMORY);
-		if (!event->data) {
-			xlink_destroy_event(event);
-			return X_LINK_ERROR;
-		}
-		if (copy_from_user(event->data, (void __user *)pmessage, size)) {
-			xlink_platform_deallocate(&xlink->pdev->dev,
-						  event->data, paddr, size,
-						  XLINK_PACKET_ALIGNMENT,
-						  XLINK_NORMAL_MEMORY);
-			xlink_destroy_event(event);
-			return X_LINK_ERROR;
-		}
-		event->paddr = paddr;
-		rc = xlink_multiplexer_tx(event, &event_queued);
-		if (!event_queued) {
-			xlink_platform_deallocate(&xlink->pdev->dev,
-						  event->data, paddr, size,
-						  XLINK_PACKET_ALIGNMENT,
-						  XLINK_NORMAL_MEMORY);
-			xlink_destroy_event(event);
-		}
-	}
+	rc = do_xlink_write_data(handle, chan, pmessage, size, 1);
 	return rc;
 }
 
@@ -1131,25 +759,6 @@ enum xlink_error xlink_write_control_data(struct xlink_handle *handle,
 	return rc;
 }
 EXPORT_SYMBOL(xlink_write_control_data);
-static enum xlink_error xlink_write_volatile_user(struct xlink_handle *handle,
-						  u16 chan, u8 const *message,
-						  u32 size)
-{
-	enum xlink_error rc = 0;
-
-	rc = do_xlink_write_volatile(handle, chan, message, size, 1);
-	return rc;
-}
-
-enum xlink_error xlink_write_volatile(struct xlink_handle *handle,
-				      u16 chan, u8 const *message, u32 size)
-{
-	enum xlink_error rc = 0;
-
-	rc = do_xlink_write_volatile(handle, chan, message, size, 0);
-	return rc;
-}
-EXPORT_SYMBOL(xlink_write_volatile);
 
 static enum xlink_error do_xlink_write_volatile(struct xlink_handle *handle,
 						u16 chan, u8 const *message,
@@ -1196,6 +805,26 @@ static enum xlink_error do_xlink_write_volatile(struct xlink_handle *handle,
 	return rc;
 }
 
+enum xlink_error xlink_write_volatile_user(struct xlink_handle *handle,
+					   u16 chan, u8 const *message,
+					   u32 size)
+{
+	enum xlink_error rc = 0;
+
+	rc = do_xlink_write_volatile(handle, chan, message, size, 1);
+	return rc;
+}
+
+enum xlink_error xlink_write_volatile(struct xlink_handle *handle,
+				      u16 chan, u8 const *message, u32 size)
+{
+	enum xlink_error rc = 0;
+
+	rc = do_xlink_write_volatile(handle, chan, message, size, 0);
+	return rc;
+}
+EXPORT_SYMBOL(xlink_write_volatile);
+
 enum xlink_error xlink_read_data(struct xlink_handle *handle,
 				 u16 chan, u8 **pmessage, u32 *size)
 {
@@ -1531,29 +1160,6 @@ static bool event_registered(u32 sw_dev_id, u32 event)
 return false;
 }
 
-static enum xlink_error xlink_register_device_event_user(struct xlink_handle *handle,
-							 u32 *event_list, u32 num_events,
-							 xlink_device_event_cb event_notif_fn)
-{
-	enum xlink_error rc;
-
-	rc = do_xlink_register_device_event(handle, event_list, num_events,
-					    event_notif_fn, 1);
-	return rc;
-}
-
-enum xlink_error xlink_register_device_event(struct xlink_handle *handle,
-					     u32 *event_list, u32 num_events,
-					     xlink_device_event_cb event_notif_fn)
-{
-	enum xlink_error rc;
-
-	rc = do_xlink_register_device_event(handle, event_list, num_events,
-					    event_notif_fn, 0);
-	return rc;
-}
-EXPORT_SYMBOL(xlink_register_device_event);
-
 static enum xlink_error do_xlink_register_device_event(struct xlink_handle *handle,
 						       u32 *event_list,
 						       u32 num_events,
@@ -1599,6 +1205,29 @@ static enum xlink_error do_xlink_register_device_event(struct xlink_handle *hand
 	return X_LINK_SUCCESS;
 }
 
+enum xlink_error xlink_register_device_event_user(struct xlink_handle *handle,
+						  u32 *event_list, u32 num_events,
+						  xlink_device_event_cb event_notif_fn)
+{
+	enum xlink_error rc;
+
+	rc = do_xlink_register_device_event(handle, event_list, num_events,
+					    event_notif_fn, 1);
+	return rc;
+}
+
+enum xlink_error xlink_register_device_event(struct xlink_handle *handle,
+					     u32 *event_list, u32 num_events,
+					     xlink_device_event_cb event_notif_fn)
+{
+	enum xlink_error rc;
+
+	rc = do_xlink_register_device_event(handle, event_list, num_events,
+					    event_notif_fn, 0);
+	return rc;
+}
+EXPORT_SYMBOL(xlink_register_device_event);
+
 enum xlink_error xlink_unregister_device_event(struct xlink_handle *handle,
 					       u32 *event_list,
 					       u32 num_events)
diff --git a/drivers/misc/xlink-core/xlink-core.h b/drivers/misc/xlink-core/xlink-core.h
new file mode 100644
index 000000000000..c3d100a75c44
--- /dev/null
+++ b/drivers/misc/xlink-core/xlink-core.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * xlink core header file.
+ *
+ * Copyright (C) 2018-2019 Intel Corporation
+ *
+ */
+
+#ifndef XLINK_CORE_H_
+#define XLINK_CORE_H_
+#include "xlink-defs.h"
+
+#define NUM_REG_EVENTS 4
+
+enum xlink_error xlink_write_data_user(struct xlink_handle *handle,
+				       u16 chan, u8 const *pmessage,
+				       u32 size);
+enum xlink_error xlink_register_device_event_user(struct xlink_handle *handle,
+						  u32 *event_list, u32 num_events,
+						  xlink_device_event_cb event_notif_fn);
+enum xlink_error xlink_write_volatile_user(struct xlink_handle *handle,
+					   u16 chan, u8 const *message,
+					   u32 size);
+#endif /* XLINK_CORE_H_ */
diff --git a/drivers/misc/xlink-core/xlink-defs.h b/drivers/misc/xlink-core/xlink-defs.h
index df686e5185c5..81aa3bfffcd3 100644
--- a/drivers/misc/xlink-core/xlink-defs.h
+++ b/drivers/misc/xlink-core/xlink-defs.h
@@ -35,7 +35,7 @@
 #define CONTROL_CHANNEL_TIMEOUT_MS	0U	// wait indefinitely
 #define SIGXLNK				44	// signal XLink uses for callback signalling
 
-#define UNUSED(x) (void)(x)
+#define UNUSED(x) ((void)(x))
 
 // the end of the IPC channel range (starting at zero)
 #define XLINK_IPC_MAX_CHANNELS	1024
diff --git a/drivers/misc/xlink-core/xlink-ioctl.c b/drivers/misc/xlink-core/xlink-ioctl.c
new file mode 100644
index 000000000000..9c1a8c896945
--- /dev/null
+++ b/drivers/misc/xlink-core/xlink-ioctl.c
@@ -0,0 +1,584 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * xlink Core Driver.
+ *
+ * Copyright (C) 2018-2019 Intel Corporation
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/platform_device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/kref.h>
+
+#include "xlink-defs.h"
+#include "xlink-core.h"
+#include "xlink-ioctl.h"
+
+#define CHANNEL_SET_USER_BIT(chan) ((chan) |= (1 << 15))
+
+int ioctl_connect(unsigned long arg)
+{
+	struct xlink_handle		devh	= {0};
+	struct xlinkconnect		con	= {0};
+	int rc = 0;
+
+	if (copy_from_user(&con, (void __user *)arg,
+			   sizeof(struct xlinkconnect)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)con.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	rc = xlink_connect(&devh);
+	if (rc == X_LINK_SUCCESS) {
+		if (copy_to_user((void __user *)con.handle,
+				 &devh, sizeof(struct xlink_handle)))
+			return -EFAULT;
+	}
+	if (copy_to_user((void __user *)con.return_code, (void *)&rc,
+			 sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_open_channel(unsigned long arg)
+{
+	struct xlink_handle	devh	= {0};
+	struct xlinkopenchannel	op	= {0};
+	int rc = 0;
+
+	if (copy_from_user(&op, (void __user *)arg,
+			   sizeof(struct xlinkopenchannel)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)op.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	rc = xlink_open_channel(&devh, op.chan, op.mode, op.data_size,
+				op.timeout);
+	if (copy_to_user((void __user *)op.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_read_data(unsigned long arg)
+{
+	struct xlink_handle	devh	= {0};
+	struct xlinkreaddata	rd	= {0};
+	int rc = 0;
+	u8 *rdaddr;
+	u32 size;
+	int interface;
+
+	if (copy_from_user(&rd, (void __user *)arg,
+			   sizeof(struct xlinkreaddata)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)rd.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	rc = xlink_read_data(&devh, rd.chan, &rdaddr, &size);
+	if (!rc) {
+		interface = get_interface_from_sw_device_id(devh.sw_device_id);
+		if (interface == IPC_INTERFACE) {
+			if (copy_to_user((void __user *)rd.pmessage, (void *)&rdaddr,
+					 sizeof(u32)))
+				return -EFAULT;
+		} else {
+			if (copy_to_user((void __user *)rd.pmessage, (void *)rdaddr,
+					 size))
+				return -EFAULT;
+		}
+		if (copy_to_user((void __user *)rd.size, (void *)&size, sizeof(size)))
+			return -EFAULT;
+	}
+	if (copy_to_user((void __user *)rd.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_read_to_buffer(unsigned long arg)
+{
+	struct xlink_handle		devh	= {0};
+	struct xlinkreadtobuffer	rdtobuf = {0};
+	int rc = 0;
+	u32 size;
+	u8 volbuf[XLINK_MAX_BUF_SIZE]; // buffer for volatile transactions
+
+	if (copy_from_user(&rdtobuf, (void __user *)arg,
+			   sizeof(struct xlinkreadtobuffer)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)rdtobuf.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	rc = xlink_read_data_to_buffer(&devh, rdtobuf.chan,
+				       (u8 *)volbuf, &size);
+	if (!rc) {
+		if (copy_to_user((void __user *)rdtobuf.pmessage, (void *)volbuf,
+				 size))
+			return -EFAULT;
+		if (copy_to_user((void __user *)rdtobuf.size, (void *)&size,
+				 sizeof(size)))
+			return -EFAULT;
+	}
+	if (copy_to_user((void __user *)rdtobuf.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_write_data(unsigned long arg)
+{
+	struct xlink_handle	devh	= {0};
+	struct xlinkwritedata		wr	= {0};
+	int rc = 0;
+
+	if (copy_from_user(&wr, (void __user *)arg,
+			   sizeof(struct xlinkwritedata)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)wr.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	if (wr.size <= XLINK_MAX_DATA_SIZE) {
+		rc = xlink_write_data_user(&devh, wr.chan, wr.pmessage,
+					   wr.size);
+		if (copy_to_user((void __user *)wr.return_code, (void *)&rc,
+				 sizeof(rc)))
+			return -EFAULT;
+	} else {
+		return -EFAULT;
+	}
+	return rc;
+}
+
+int ioctl_write_control_data(unsigned long arg)
+{
+	struct xlink_handle	devh	= {0};
+	struct xlinkwritedata		wr	= {0};
+	u8 volbuf[XLINK_MAX_BUF_SIZE];
+	int rc = 0;
+
+	if (copy_from_user(&wr, (void __user *)arg,
+			   sizeof(struct xlinkwritedata)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)wr.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	if (wr.size <= XLINK_MAX_CONTROL_DATA_SIZE) {
+		if (copy_from_user(volbuf, (void __user *)wr.pmessage,
+				   wr.size))
+			return -EFAULT;
+		rc = xlink_write_control_data(&devh, wr.chan, volbuf,
+					      wr.size);
+		if (copy_to_user((void __user *)wr.return_code,
+				 (void *)&rc, sizeof(rc)))
+			return -EFAULT;
+	} else {
+		return -EFAULT;
+	}
+	return rc;
+}
+
+int ioctl_write_volatile_data(unsigned long arg)
+{
+	struct xlink_handle	devh	= {0};
+	struct xlinkwritedata	wr	= {0};
+	int rc = 0;
+	u8 volbuf[XLINK_MAX_BUF_SIZE]; // buffer for volatile transactions
+
+	if (copy_from_user(&wr, (void __user *)arg,
+			   sizeof(struct xlinkwritedata)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)wr.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	if (wr.size <= XLINK_MAX_BUF_SIZE) {
+		if (copy_from_user(volbuf, (void __user *)wr.pmessage,
+				   wr.size))
+			return -EFAULT;
+		rc = xlink_write_volatile_user(&devh, wr.chan, volbuf,
+					       wr.size);
+		if (copy_to_user((void __user *)wr.return_code, (void *)&rc,
+				 sizeof(rc)))
+			return -EFAULT;
+	} else {
+		return -EFAULT;
+	}
+	return rc;
+}
+
+int ioctl_release_data(unsigned long arg)
+{
+	struct xlink_handle	devh	= {0};
+	struct xlinkrelease	rel	= {0};
+	int rc = 0;
+	u8 reladdr;
+
+	if (copy_from_user(&rel, (void __user *)arg,
+			   sizeof(struct xlinkrelease)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)rel.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	if (rel.addr) {
+		if (get_user(reladdr, (u32 __user *const)rel.addr))
+			return -EFAULT;
+		rc = xlink_release_data(&devh, rel.chan,
+					(u8 *)&reladdr);
+	} else {
+		rc = xlink_release_data(&devh, rel.chan, NULL);
+	}
+	if (copy_to_user((void __user *)rel.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_close_channel(unsigned long arg)
+{
+	struct xlink_handle	devh	= {0};
+	struct xlinkopenchannel		op	= {0};
+	int rc = 0;
+
+	if (copy_from_user(&op, (void __user *)arg,
+			   sizeof(struct xlinkopenchannel)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)op.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	rc = xlink_close_channel(&devh, op.chan);
+	if (copy_to_user((void __user *)op.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_start_vpu(unsigned long arg)
+{
+	struct xlinkstartvpu		startvpu = {0};
+	char filename[64];
+	int rc = 0;
+
+	if (copy_from_user(&startvpu, (void __user *)arg,
+			   sizeof(struct xlinkstartvpu)))
+		return -EFAULT;
+	if (startvpu.namesize > sizeof(filename))
+		return -EINVAL;
+	memset(filename, 0, sizeof(filename));
+	if (copy_from_user(filename, (void __user *)startvpu.filename,
+			   startvpu.namesize))
+		return -EFAULT;
+	rc = xlink_start_vpu(filename);
+	if (copy_to_user((void __user *)startvpu.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_stop_vpu(void)
+{
+	int rc = 0;
+
+	rc = xlink_stop_vpu();
+	return rc;
+}
+
+int ioctl_disconnect(unsigned long arg)
+{
+	struct xlink_handle		devh	= {0};
+	struct xlinkconnect		con	= {0};
+	int rc = 0;
+
+	if (copy_from_user(&con, (void __user *)arg,
+			   sizeof(struct xlinkconnect)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)con.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	rc = xlink_disconnect(&devh);
+	if (copy_to_user((void __user *)con.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_get_device_name(unsigned long arg)
+{
+	struct xlink_handle		devh	= {0};
+	struct xlinkgetdevicename	devn	= {0};
+	char name[XLINK_MAX_DEVICE_NAME_SIZE];
+	int rc = 0;
+
+	if (copy_from_user(&devn, (void __user *)arg,
+			   sizeof(struct xlinkgetdevicename)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)devn.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	if (devn.name_size <= XLINK_MAX_DEVICE_NAME_SIZE) {
+		rc = xlink_get_device_name(&devh, name, devn.name_size);
+		if (!rc) {
+			if (copy_to_user((void __user *)devn.name, (void *)name,
+					 devn.name_size))
+				return -EFAULT;
+		}
+	} else {
+		rc = X_LINK_ERROR;
+	}
+	if (copy_to_user((void __user *)devn.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_get_device_list(unsigned long arg)
+{
+	struct xlinkgetdevicelist	devl	= {0};
+	u32 sw_device_id_list[XLINK_MAX_DEVICE_LIST_SIZE];
+	u32 num_devices = 0;
+	int rc = 0;
+
+	if (copy_from_user(&devl, (void __user *)arg,
+			   sizeof(struct xlinkgetdevicelist)))
+		return -EFAULT;
+	rc = xlink_get_device_list(sw_device_id_list, &num_devices);
+	if (!rc && num_devices <= XLINK_MAX_DEVICE_LIST_SIZE) {
+		/* TODO: this next copy is dangerous! we have no idea
+		 * how large the devl.sw_device_id_list buffer is
+		 * provided by the user. if num_devices is too large,
+		 * the copy will overflow the buffer.
+		 */
+		if (copy_to_user((void __user *)devl.sw_device_id_list,
+				 (void *)sw_device_id_list,
+				 (sizeof(*sw_device_id_list)
+				 * num_devices)))
+			return -EFAULT;
+		if (copy_to_user((void __user *)devl.num_devices, (void *)&num_devices,
+				 (sizeof(num_devices))))
+			return -EFAULT;
+	}
+	if (copy_to_user((void __user *)devl.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_get_device_status(unsigned long arg)
+{
+	struct xlink_handle		devh	= {0};
+	struct xlinkgetdevicestatus	devs	= {0};
+	u32 device_status = 0;
+	int rc = 0;
+
+	if (copy_from_user(&devs, (void __user *)arg,
+			   sizeof(struct xlinkgetdevicestatus)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)devs.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	rc = xlink_get_device_status(&devh, &device_status);
+	if (!rc) {
+		if (copy_to_user((void __user *)devs.device_status,
+				 (void *)&device_status,
+				 sizeof(device_status)))
+			return -EFAULT;
+	}
+	if (copy_to_user((void __user *)devs.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_boot_device(unsigned long arg)
+{
+	struct xlink_handle		devh	= {0};
+	struct xlinkbootdevice		boot	= {0};
+	char filename[64];
+	int rc = 0;
+
+	if (copy_from_user(&boot, (void __user *)arg,
+			   sizeof(struct xlinkbootdevice)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)boot.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	if (boot.binary_name_size > sizeof(filename))
+		return -EINVAL;
+	memset(filename, 0, sizeof(filename));
+	if (copy_from_user(filename, (void __user *)boot.binary_name,
+			   boot.binary_name_size))
+		return -EFAULT;
+	rc = xlink_boot_device(&devh, filename);
+	if (copy_to_user((void __user *)boot.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_reset_device(unsigned long arg)
+{
+	struct xlink_handle		devh	= {0};
+	struct xlinkresetdevice		res	= {0};
+	int rc = 0;
+
+	if (copy_from_user(&res, (void __user *)arg,
+			   sizeof(struct xlinkresetdevice)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)res.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	rc = xlink_reset_device(&devh);
+	if (copy_to_user((void __user *)res.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_get_device_mode(unsigned long arg)
+{
+	struct xlink_handle	devh	= {0};
+	struct xlinkdevmode	devm	= {0};
+	u32 device_mode = 0;
+	int rc = 0;
+
+	if (copy_from_user(&devm, (void __user *)arg,
+			   sizeof(struct xlinkdevmode)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)devm.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	rc = xlink_get_device_mode(&devh, &device_mode);
+	if (!rc) {
+		if (copy_to_user((void __user *)devm.device_mode, (void *)&device_mode,
+				 sizeof(device_mode)))
+			return -EFAULT;
+	}
+	if (copy_to_user((void __user *)devm.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_set_device_mode(unsigned long arg)
+{
+	struct xlink_handle	devh	= {0};
+	struct xlinkdevmode	devm	= {0};
+	u32 device_mode = 0;
+	int rc = 0;
+
+	if (copy_from_user(&devm, (void __user *)arg,
+			   sizeof(struct xlinkdevmode)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)devm.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	if (copy_from_user(&device_mode, (void __user *)devm.device_mode,
+			   sizeof(device_mode)))
+		return -EFAULT;
+	rc = xlink_set_device_mode(&devh, device_mode);
+	if (copy_to_user((void __user *)devm.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_register_device_event(unsigned long arg)
+{
+	struct xlink_handle	devh	= {0};
+	struct xlinkregdevevent	regdevevent = {0};
+	u32 num_events = 0;
+	u32 *ev_list;
+	int rc = 0;
+
+	if (copy_from_user(&regdevevent, (void __user *)arg,
+			   sizeof(struct xlinkregdevevent)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)regdevevent.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	num_events = regdevevent.num_events;
+	if (num_events > 0 && num_events <= NUM_REG_EVENTS) {
+		ev_list = kzalloc((num_events * sizeof(u32)), GFP_KERNEL);
+		if (ev_list) {
+			if (copy_from_user(ev_list,
+					   (void __user *)regdevevent.event_list,
+					   (num_events * sizeof(u32)))) {
+				kfree(ev_list);
+				return -EFAULT;
+			}
+			rc = xlink_register_device_event_user(&devh,
+							      ev_list,
+							      num_events,
+							      NULL);
+			kfree(ev_list);
+		} else {
+			rc = X_LINK_ERROR;
+		}
+	} else {
+		rc = X_LINK_ERROR;
+	}
+	if (copy_to_user((void __user *)regdevevent.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_unregister_device_event(unsigned long arg)
+{
+	struct xlink_handle	devh	= {0};
+	struct xlinkregdevevent	regdevevent = {0};
+	u32 num_events = 0;
+	u32 *ev_list;
+	int rc = 0;
+
+	if (copy_from_user(&regdevevent, (void __user *)arg,
+			   sizeof(struct xlinkregdevevent)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)regdevevent.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	num_events = regdevevent.num_events;
+	if (num_events <= NUM_REG_EVENTS) {
+		ev_list = kzalloc((num_events * sizeof(u32)), GFP_KERNEL);
+		if (copy_from_user(ev_list,
+				   (void __user *)regdevevent.event_list,
+				   (num_events * sizeof(u32)))) {
+			kfree(ev_list);
+			return -EFAULT;
+		}
+		rc = xlink_unregister_device_event(&devh, ev_list, num_events);
+		kfree(ev_list);
+	} else {
+		rc = X_LINK_ERROR;
+	}
+	if (copy_to_user((void __user *)regdevevent.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_data_ready_callback(unsigned long arg)
+{
+	struct xlink_handle	devh	= {0};
+	struct xlinkcallback	cb	= {0};
+	int rc = 0;
+
+	if (copy_from_user(&cb, (void __user *)arg,
+			   sizeof(struct xlinkcallback)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)cb.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	CHANNEL_SET_USER_BIT(cb.chan); // set MSbit for user space call
+	rc = xlink_data_available_event(&devh, cb.chan, cb.callback);
+	if (copy_to_user((void __user *)cb.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
+
+int ioctl_data_consumed_callback(unsigned long arg)
+{
+	struct xlink_handle	devh	= {0};
+	struct xlinkcallback	cb	= {0};
+	int rc = 0;
+
+	if (copy_from_user(&cb, (void __user *)arg,
+			   sizeof(struct xlinkcallback)))
+		return -EFAULT;
+	if (copy_from_user(&devh, (void __user *)cb.handle,
+			   sizeof(struct xlink_handle)))
+		return -EFAULT;
+	CHANNEL_SET_USER_BIT(cb.chan); // set MSbit for user space call
+	rc = xlink_data_consumed_event(&devh, cb.chan, cb.callback);
+	if (copy_to_user((void __user *)cb.return_code, (void *)&rc, sizeof(rc)))
+		return -EFAULT;
+	return rc;
+}
diff --git a/drivers/misc/xlink-core/xlink-ioctl.h b/drivers/misc/xlink-core/xlink-ioctl.h
new file mode 100644
index 000000000000..7818b676d488
--- /dev/null
+++ b/drivers/misc/xlink-core/xlink-ioctl.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * xlink ioctl header files.
+ *
+ * Copyright (C) 2018-2019 Intel Corporation
+ *
+ */
+
+#ifndef XLINK_IOCTL_H_
+#define XLINK_IOCTL_H_
+
+int ioctl_connect(unsigned long arg);
+int ioctl_open_channel(unsigned long arg);
+int ioctl_read_data(unsigned long arg);
+int ioctl_read_to_buffer(unsigned long arg);
+int ioctl_write_data(unsigned long arg);
+int ioctl_write_control_data(unsigned long arg);
+int ioctl_write_volatile_data(unsigned long arg);
+int ioctl_release_data(unsigned long arg);
+int ioctl_close_channel(unsigned long arg);
+int ioctl_start_vpu(unsigned long arg);
+int ioctl_stop_vpu(void);
+int ioctl_disconnect(unsigned long arg);
+int ioctl_get_device_name(unsigned long arg);
+int ioctl_get_device_list(unsigned long arg);
+int ioctl_get_device_status(unsigned long arg);
+int ioctl_boot_device(unsigned long arg);
+int ioctl_reset_device(unsigned long arg);
+int ioctl_get_device_mode(unsigned long arg);
+int ioctl_set_device_mode(unsigned long arg);
+int ioctl_register_device_event(unsigned long arg);
+int ioctl_unregister_device_event(unsigned long arg);
+int ioctl_data_ready_callback(unsigned long arg);
+int ioctl_data_consumed_callback(unsigned long arg);
+
+#endif /* XLINK_IOCTL_H_ */
-- 
2.17.1

Re: [PATCH 22/22] xlink-core: factorize xlink_ioctl function by creating sub-functions for each ioctl command

[Joe Perches]

On Tue, 2020-12-01 at 14:35 -0800, mgross@linux.intel.com wrote:
> From: Seamus Kelly <seamus.kelly@intel.com>
> 
> Refactor the too large IOCTL function to call helper functions.

This should not be sent as a known poor patch as patch 21 of 22
and then updated in patch 22 of 22 with a better style.

This should be sent in the as desired final form the first time
so that people don't give you useless notes.

> @@ -342,427 +323,84 @@ static int kmb_xlink_remove(struct platform_device *pdev)
>   * IOCTL function for User Space access to xlink kernel functions
>   *
>   */
> +int ioctl_connect(unsigned long arg);
>  
> 
>  static long xlink_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
>  {
> -	struct xlink_handle		devh	= {0};
> -	struct xlinkopenchannel		op	= {0};
> -	struct xlinkwritedata		wr	= {0};
> -	struct xlinkreaddata		rd	= {0};
> -	struct xlinkreadtobuffer	rdtobuf = {0};
> -	struct xlinkconnect		con	= {0};
> -	struct xlinkrelease		rel	= {0};
> -	struct xlinkstartvpu		startvpu = {0};
> -	struct xlinkcallback		cb	= {0};
> -	struct xlinkgetdevicename	devn	= {0};
> -	struct xlinkgetdevicelist	devl	= {0};
> -	struct xlinkgetdevicestatus	devs	= {0};
> -	struct xlinkbootdevice		boot	= {0};
> -	struct xlinkresetdevice		res	= {0};
> -	struct xlinkdevmode		devm	= {0};
> -	struct xlinkregdevevent		regdevevent = {0};
> -	u32 sw_device_id_list[XLINK_MAX_DEVICE_LIST_SIZE];
> -	char name[XLINK_MAX_DEVICE_NAME_SIZE];
> -	int interface = NULL_INTERFACE;
> -	u32 device_status = 0;
> -	u32 num_devices = 0;
> -	u32 device_mode = 0;
> -	u32 num_events = 0;
> -	char filename[64];
> -	u32 *ev_list;
> -	u8 reladdr;
> -	u8 *rdaddr;
> -	u32 size;
>  	int rc;
>  
> 
>  	switch (cmd) {
>  	case XL_CONNECT:
> -		if (copy_from_user(&con, (void __user *)arg,
> -				   sizeof(struct xlinkconnect)))
> -			return -EFAULT;
> -		if (copy_from_user(&devh, (void __user *)con.handle,
> -				   sizeof(struct xlink_handle)))
> -			return -EFAULT;
> -		rc = xlink_connect(&devh);
> -		if (rc == X_LINK_SUCCESS) {
> -			if (copy_to_user((void __user *)con.handle,
> -					 &devh, sizeof(struct xlink_handle)))
> -				return -EFAULT;
> -		}
> -		if (copy_to_user((void __user *)con.return_code, (void *)&rc,
> -				 sizeof(rc)))
> -			return -EFAULT;
> +		rc = ioctl_connect(arg);
>  		break;

etc...

Re: [PATCH 22/22] xlink-core: factorize xlink_ioctl function by creating sub-functions for each ioctl command

[mark gross]

On Sun, Dec 06, 2020 at 07:05:34PM -0800, Joe Perches wrote:
> On Tue, 2020-12-01 at 14:35 -0800, mgross@linux.intel.com wrote:
> > From: Seamus Kelly <seamus.kelly@intel.com>
> > 
> > Refactor the too large IOCTL function to call helper functions.
> 
> This should not be sent as a known poor patch as patch 21 of 22
> and then updated in patch 22 of 22 with a better style.
> 
> This should be sent in the as desired final form the first time
> so that people don't give you useless notes.

We will re-work the changes to better integrate this one in the earlier
changes.

--mark

> 
> > @@ -342,427 +323,84 @@ static int kmb_xlink_remove(struct platform_device *pdev)
> >   * IOCTL function for User Space access to xlink kernel functions
> >   *
> >   */
> > +int ioctl_connect(unsigned long arg);
> >  
> > 
> >  static long xlink_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
> >  {
> > -	struct xlink_handle		devh	= {0};
> > -	struct xlinkopenchannel		op	= {0};
> > -	struct xlinkwritedata		wr	= {0};
> > -	struct xlinkreaddata		rd	= {0};
> > -	struct xlinkreadtobuffer	rdtobuf = {0};
> > -	struct xlinkconnect		con	= {0};
> > -	struct xlinkrelease		rel	= {0};
> > -	struct xlinkstartvpu		startvpu = {0};
> > -	struct xlinkcallback		cb	= {0};
> > -	struct xlinkgetdevicename	devn	= {0};
> > -	struct xlinkgetdevicelist	devl	= {0};
> > -	struct xlinkgetdevicestatus	devs	= {0};
> > -	struct xlinkbootdevice		boot	= {0};
> > -	struct xlinkresetdevice		res	= {0};
> > -	struct xlinkdevmode		devm	= {0};
> > -	struct xlinkregdevevent		regdevevent = {0};
> > -	u32 sw_device_id_list[XLINK_MAX_DEVICE_LIST_SIZE];
> > -	char name[XLINK_MAX_DEVICE_NAME_SIZE];
> > -	int interface = NULL_INTERFACE;
> > -	u32 device_status = 0;
> > -	u32 num_devices = 0;
> > -	u32 device_mode = 0;
> > -	u32 num_events = 0;
> > -	char filename[64];
> > -	u32 *ev_list;
> > -	u8 reladdr;
> > -	u8 *rdaddr;
> > -	u32 size;
> >  	int rc;
> >  
> > 
> >  	switch (cmd) {
> >  	case XL_CONNECT:
> > -		if (copy_from_user(&con, (void __user *)arg,
> > -				   sizeof(struct xlinkconnect)))
> > -			return -EFAULT;
> > -		if (copy_from_user(&devh, (void __user *)con.handle,
> > -				   sizeof(struct xlink_handle)))
> > -			return -EFAULT;
> > -		rc = xlink_connect(&devh);
> > -		if (rc == X_LINK_SUCCESS) {
> > -			if (copy_to_user((void __user *)con.handle,
> > -					 &devh, sizeof(struct xlink_handle)))
> > -				return -EFAULT;
> > -		}
> > -		if (copy_to_user((void __user *)con.return_code, (void *)&rc,
> > -				 sizeof(rc)))
> > -			return -EFAULT;
> > +		rc = ioctl_connect(arg);
> >  		break;
> 
> etc...
> 

Re: [PATCH 22/22] xlink-core: factorize xlink_ioctl function by creating sub-functions for each ioctl command

[Joe Perches]

On Tue, 2020-12-01 at 14:35 -0800, mgross@linux.intel.com wrote:
> Refactor the too large IOCTL function to call helper functions.
[]
> diff --git a/drivers/misc/xlink-core/xlink-ioctl.c b/drivers/misc/xlink-core/xlink-ioctl.c
[]
> +int ioctl_write_data(unsigned long arg)
> +{
> +	struct xlink_handle	devh	= {0};
> +	struct xlinkwritedata		wr	= {0};
> +	int rc = 0;
> +
> +	if (copy_from_user(&wr, (void __user *)arg,
> +			   sizeof(struct xlinkwritedata)))
> +		return -EFAULT;
> +	if (copy_from_user(&devh, (void __user *)wr.handle,
> +			   sizeof(struct xlink_handle)))
> +		return -EFAULT;
> +	if (wr.size <= XLINK_MAX_DATA_SIZE) {
> +		rc = xlink_write_data_user(&devh, wr.chan, wr.pmessage,
> +					   wr.size);
> +		if (copy_to_user((void __user *)wr.return_code, (void *)&rc,
> +				 sizeof(rc)))
> +			return -EFAULT;
> +	} else {
> +		return -EFAULT;
> +	}

Please reverse the test to reduce indentation

	if (wr.size > XLINK_MAX_DATA_SIZE)
		return -EFAULT;
	rc = xlink_write_data_user(&devh, wr.chan, wr.pmessage, wr.size);
	if (copy_to_user((void __user *)wr.return_code, (void *)&rc, sizeof(rc)))
		return -EFAULT;
	return rc;

The last 3 lines here are repeated multiple times in many functions.
It might be sensible to add something like:

int copy_result_to_user(u32 *where, int rc)
{
	if (copy_to_user((void __user *)where, &rc, sizeof(rc)))
		return -EFAULT;
	return rc;
}

so this could be written

	rc = xlink_write_data_user(&devh, wr.chan, wr.pmessage, wr.size);

	return copy_result_to_user(wr.return_code, rc);

IMO: return_code isn't a great name for a pointer as it rather
indicates a value not an address and there's an awful lot of
casting to __user in all this code that perhaps should be marked
in the struct definitions rather than inside the function uses.

> +}
> +
> +int ioctl_write_control_data(unsigned long arg)
> +{
> +	struct xlink_handle	devh	= {0};

All of these initializations with {0} should use {} instead as
the first element of whatever struct is not guaranteed to be
assignable as an int and gcc/clang guarantee 0 initialization

> +	struct xlinkwritedata		wr	= {0};
> +	u8 volbuf[XLINK_MAX_BUF_SIZE];
> +	int rc = 0;
> +
> +	if (copy_from_user(&wr, (void __user *)arg,
> +			   sizeof(struct xlinkwritedata)))
> +		return -EFAULT;
> +	if (copy_from_user(&devh, (void __user *)wr.handle,
> +			   sizeof(struct xlink_handle)))
> +		return -EFAULT;
> +	if (wr.size <= XLINK_MAX_CONTROL_DATA_SIZE) {
> +		if (copy_from_user(volbuf, (void __user *)wr.pmessage,
> +				   wr.size))
> +			return -EFAULT;
> +		rc = xlink_write_control_data(&devh, wr.chan, volbuf,
> +					      wr.size);
> +		if (copy_to_user((void __user *)wr.return_code,
> +				 (void *)&rc, sizeof(rc)))
> +			return -EFAULT;
> +	} else {
> +		return -EFAULT;

Same test reversal and deindentation please.

> +	}
> +	return rc;
> +}
> +

RE: [PATCH 22/22] xlink-core: factorize xlink_ioctl function by creating sub-functions for each ioctl command

[Kelly, Seamus]

-----Original Message-----
From: Joe Perches <joe@perches.com> 
Sent: Wednesday, December 9, 2020 8:31 AM
To: mgross@linux.intel.com; markgross@kernel.org; arnd@arndb.de; bp@suse.de; damien.lemoal@wdc.com; dragan.cvetic@xilinx.com; gregkh@linuxfoundation.org; corbet@lwn.net; leonard.crestez@nxp.com; palmerdabbelt@google.com; paul.walmsley@sifive.com; peng.fan@nxp.com; robh+dt@kernel.org; shawnguo@kernel.org
Cc: linux-kernel@vger.kernel.org; Kelly, Seamus <seamus.kelly@intel.com>
Subject: Re: [PATCH 22/22] xlink-core: factorize xlink_ioctl function by creating sub-functions for each ioctl command

On Tue, 2020-12-01 at 14:35 -0800, mgross@linux.intel.com wrote:
> Refactor the too large IOCTL function to call helper functions.
[]
> diff --git a/drivers/misc/xlink-core/xlink-ioctl.c 
> b/drivers/misc/xlink-core/xlink-ioctl.c
[]
> +int ioctl_write_data(unsigned long arg) {
> +	struct xlink_handle	devh	= {0};
> +	struct xlinkwritedata		wr	= {0};
> +	int rc = 0;
> +
> +	if (copy_from_user(&wr, (void __user *)arg,
> +			   sizeof(struct xlinkwritedata)))
> +		return -EFAULT;
> +	if (copy_from_user(&devh, (void __user *)wr.handle,
> +			   sizeof(struct xlink_handle)))
> +		return -EFAULT;
> +	if (wr.size <= XLINK_MAX_DATA_SIZE) {
> +		rc = xlink_write_data_user(&devh, wr.chan, wr.pmessage,
> +					   wr.size);
> +		if (copy_to_user((void __user *)wr.return_code, (void *)&rc,
> +				 sizeof(rc)))
> +			return -EFAULT;
> +	} else {
> +		return -EFAULT;
> +	}

Please reverse the test to reduce indentation
[Kelly, Seamus]  Thank you!  will do.

	if (wr.size > XLINK_MAX_DATA_SIZE)
		return -EFAULT;
	rc = xlink_write_data_user(&devh, wr.chan, wr.pmessage, wr.size);
	if (copy_to_user((void __user *)wr.return_code, (void *)&rc, sizeof(rc)))
		return -EFAULT;
	return rc;

The last 3 lines here are repeated multiple times in many functions.
It might be sensible to add something like:

int copy_result_to_user(u32 *where, int rc) {
	if (copy_to_user((void __user *)where, &rc, sizeof(rc)))
		return -EFAULT;
	return rc;
}

so this could be written

	rc = xlink_write_data_user(&devh, wr.chan, wr.pmessage, wr.size);

	return copy_result_to_user(wr.return_code, rc);

[Kelly, Seamus] Thank you!  will do.

IMO: return_code isn't a great name for a pointer as it rather indicates a value not an address and there's an awful lot of casting to __user in all this code that perhaps should be marked in the struct definitions rather than inside the function uses.

[Kelly, Seamus] Thank you!  will do.
> +}
> +
> +int ioctl_write_control_data(unsigned long arg) {
> +	struct xlink_handle	devh	= {0};

All of these initializations with {0} should use {} instead as the first element of whatever struct is not guaranteed to be assignable as an int and gcc/clang guarantee 0 initialization
[Kelly, Seamus] Thank you!  will do.

> +	struct xlinkwritedata		wr	= {0};
> +	u8 volbuf[XLINK_MAX_BUF_SIZE];
> +	int rc = 0;
> +
> +	if (copy_from_user(&wr, (void __user *)arg,
> +			   sizeof(struct xlinkwritedata)))
> +		return -EFAULT;
> +	if (copy_from_user(&devh, (void __user *)wr.handle,
> +			   sizeof(struct xlink_handle)))
> +		return -EFAULT;
> +	if (wr.size <= XLINK_MAX_CONTROL_DATA_SIZE) {
> +		if (copy_from_user(volbuf, (void __user *)wr.pmessage,
> +				   wr.size))
> +			return -EFAULT;
> +		rc = xlink_write_control_data(&devh, wr.chan, volbuf,
> +					      wr.size);
> +		if (copy_to_user((void __user *)wr.return_code,
> +				 (void *)&rc, sizeof(rc)))
> +			return -EFAULT;
> +	} else {
> +		return -EFAULT;

Same test reversal and deindentation please.
[Kelly, Seamus] Thank you!  will do.

> +	}
> +	return rc;
> +}
> +


--------------------------------------------------------------
Intel Research and Development Ireland Limited
Registered in Ireland
Registered Office: Collinstown Industrial Park, Leixlip, County Kildare
Registered Number: 308263


This e-mail and any attachments may contain confidential material for the sole
use of the intended recipient(s). Any review or distribution by others is
strictly prohibited. If you are not the intended recipient, please contact the
sender and delete all copies.