* make menuconfig versus make xconfig, Kernel 2.4
@ 2001-05-11 5:50 Joachim Backes
2001-05-11 6:10 ` Andrzej Krzysztofowicz
0 siblings, 1 reply; 2+ messages in thread
From: Joachim Backes @ 2001-05-11 5:50 UTC (permalink / raw)
To: LINUX Kernel
I made an update from Kernel 2.2.19 to 2.4.4, and I made
a copy from the 2.2.19 .config file into the 2.4.4 directory.
After that, I was wondering about the following fact:
"make menuconfig" for kernel 2.4.4 showed (what seems to
be correct) for ATA/IDE the same kernel configuration, as it
was shown in 2.2.19, when using the 2.2.19 ".config".
But: 2.4.4 "make xconfig" using the 2.2.19 .config showed
a disabled ATA/IDE configuration.
Only after saving the 2.4.4 configuration produced by "make menuconfig",
then the configuration for ATA/IDE was correctly displayed by "make xconfig".
Regards
Joachim Backes
--
Joachim Backes <backes@rhrk.uni-kl.de> | Univ. of Kaiserslautern
Computer Center, High Performance Computing | Phone: +49-631-205-2438
D-67653 Kaiserslautern, PO Box 3049, Germany | Fax: +49-631-205-3056
---------------------------------------------+------------------------
WWW: http://hlrwm.rhrk.uni-kl.de/home/staff/backes.html
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: make menuconfig versus make xconfig, Kernel 2.4
2001-05-11 5:50 make menuconfig versus make xconfig, Kernel 2.4 Joachim Backes
@ 2001-05-11 6:10 ` Andrzej Krzysztofowicz
0 siblings, 0 replies; 2+ messages in thread
From: Andrzej Krzysztofowicz @ 2001-05-11 6:10 UTC (permalink / raw)
To: backes; +Cc: LINUX Kernel
"Joachim Backes wrote:"
> I made an update from Kernel 2.2.19 to 2.4.4, and I made
> a copy from the 2.2.19 .config file into the 2.4.4 directory.
>
> After that, I was wondering about the following fact:
>
> "make menuconfig" for kernel 2.4.4 showed (what seems to
> be correct) for ATA/IDE the same kernel configuration, as it
> was shown in 2.2.19, when using the 2.2.19 ".config".
>
> But: 2.4.4 "make xconfig" using the 2.2.19 .config showed
> a disabled ATA/IDE configuration.
>
> Only after saving the 2.4.4 configuration produced by "make menuconfig",
> then the configuration for ATA/IDE was correctly displayed by "make xconfig".
The Menuconfig behaviour is probably incorrect. CONFIG_IDE is missing.
Try
make oldconfig
first.
--
=======================================================================
Andrzej M. Krzysztofowicz ankry@mif.pg.gda.pl
phone (48)(58) 347 14 61
Faculty of Applied Phys. & Math., Technical University of Gdansk
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2001-05-11 6:10 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-05-11 5:50 make menuconfig versus make xconfig, Kernel 2.4 Joachim Backes
2001-05-11 6:10 ` Andrzej Krzysztofowicz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®