* new aic7xxx code in 2.4.9 causes kernel panics
@ 2001-08-25 17:39 Andreas Steinmetz
0 siblings, 0 replies; only message in thread
From: Andreas Steinmetz @ 2001-08-25 17:39 UTC (permalink / raw)
To: linux-kernel
Hi,
please CC me on replies as I'm not subscribed to the list.
The new aix7xxx driver in 2.4.9 panics the system during reboot. This may or
may not be related to the kernel raid code (the system in question runs a small
native ext2 partition for kernels/lilo and all other partitions are ext2/raid1
(autodetect).
What happens during reboot is that after the 'flushing signals' message from
the raid code there was a 20 to 30 second delay, then the new aic7xxx code
complained about 'ABORT' and then caused a kernel panic. This scenario was
reproducable.
Unfortunately I didn't have the time to write down the exact details as I had
to get the system working and did revert to the old aix7xxx code which works
flawlessly.
Andreas Steinmetz
D.O.M. Datenverarbeitung GmbH
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2001-08-25 17:40 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-08-25 17:39 new aic7xxx code in 2.4.9 causes kernel panics Andreas Steinmetz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®