* [PATCH] drm: bridge: remove error message for EPROBE_DEFER in bridge_attach
@ 2021-12-03 8:59 Yannick Fertre
2021-12-03 9:31 ` Laurent Pinchart
0 siblings, 1 reply; 2+ messages in thread
From: Yannick Fertre @ 2021-12-03 8:59 UTC (permalink / raw)
To: Yannick Fertre, Philippe Cornu, Raphael Gallais-Pou,
Laurent Pinchart, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, David Airlie, Daniel Vetter, dri-devel,
linux-kernel
Probe deferred is not an error, don't print it.
Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
---
drivers/gpu/drm/drm_bridge.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c
index c96847fc0ebc..cef0a62ef5d0 100644
--- a/drivers/gpu/drm/drm_bridge.c
+++ b/drivers/gpu/drm/drm_bridge.c
@@ -288,11 +288,13 @@ int drm_bridge_attach(struct drm_encoder *encoder, struct drm_bridge *bridge,
list_del(&bridge->chain_node);
#ifdef CONFIG_OF
- DRM_ERROR("failed to attach bridge %pOF to encoder %s: %d\n",
- bridge->of_node, encoder->name, ret);
+ if (ret != -EPROBE_DEFER)
+ DRM_ERROR("failed to attach bridge %pOF to encoder %s: %d\n",
+ bridge->of_node, encoder->name, ret);
#else
- DRM_ERROR("failed to attach bridge to encoder %s: %d\n",
- encoder->name, ret);
+ if (ret != -EPROBE_DEFER)
+ DRM_ERROR("failed to attach bridge to encoder %s: %d\n",
+ encoder->name, ret);
#endif
return ret;
--
2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [PATCH] drm: bridge: remove error message for EPROBE_DEFER in bridge_attach
2021-12-03 8:59 [PATCH] drm: bridge: remove error message for EPROBE_DEFER in bridge_attach Yannick Fertre
@ 2021-12-03 9:31 ` Laurent Pinchart
0 siblings, 0 replies; 2+ messages in thread
From: Laurent Pinchart @ 2021-12-03 9:31 UTC (permalink / raw)
To: Yannick Fertre
Cc: Philippe Cornu, Raphael Gallais-Pou, Maarten Lankhorst,
Maxime Ripard, Thomas Zimmermann, David Airlie, Daniel Vetter,
dri-devel, linux-kernel
Hi Yannick,
Thank you for the patch.
On Fri, Dec 03, 2021 at 09:59:31AM +0100, Yannick Fertre wrote:
> Probe deferred is not an error, don't print it.
>
> Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
> ---
> drivers/gpu/drm/drm_bridge.c | 10 ++++++----
> 1 file changed, 6 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c
> index c96847fc0ebc..cef0a62ef5d0 100644
> --- a/drivers/gpu/drm/drm_bridge.c
> +++ b/drivers/gpu/drm/drm_bridge.c
> @@ -288,11 +288,13 @@ int drm_bridge_attach(struct drm_encoder *encoder, struct drm_bridge *bridge,
> list_del(&bridge->chain_node);
>
> #ifdef CONFIG_OF
> - DRM_ERROR("failed to attach bridge %pOF to encoder %s: %d\n",
> - bridge->of_node, encoder->name, ret);
> + if (ret != -EPROBE_DEFER)
> + DRM_ERROR("failed to attach bridge %pOF to encoder %s: %d\n",
> + bridge->of_node, encoder->name, ret);
> #else
> - DRM_ERROR("failed to attach bridge to encoder %s: %d\n",
> - encoder->name, ret);
> + if (ret != -EPROBE_DEFER)
> + DRM_ERROR("failed to attach bridge to encoder %s: %d\n",
> + encoder->name, ret);
It's useful to know about what caused a probe deferral though. There's
now a dev_err_probe() function that prints the message as an dev_err if
the error code is not -EPROBE_DEFER, and as dev_dbg otherwise. It's
meant for probe time only though, so I don't think it can be used here,
but a similar feature could be useful. Or dev_err_probe() could be
extended to support non-probe use cases, but that would be more
difficult.
> #endif
>
> return ret;
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-12-03 9:31 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-03 8:59 [PATCH] drm: bridge: remove error message for EPROBE_DEFER in bridge_attach Yannick Fertre
2021-12-03 9:31 ` Laurent Pinchart
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®