* Linux warns `sched: DL replenish lagged too much`
@ 2025-02-20 10:47 Paul Menzel
2025-02-20 13:35 ` Juri Lelli
0 siblings, 1 reply; 5+ messages in thread
From: Paul Menzel @ 2025-02-20 10:47 UTC (permalink / raw)
To: Ingo Molnar, Peter Zijlstra, Juri Lelli, Vincent Guittot; +Cc: LKML
[-- Attachment #1: Type: text/plain, Size: 1345 bytes --]
Dear Linux folks,
On the Intel Kaby Lake laptop Dell XPS 13 with Linux
6.14.0-rc3-00060-g6537cfb395f3, waking it up from ACPI S3 with an LMP
USB-C mini dock connected, that had an Ethernet cable and a power
adapter plugged in, everything was lagging, and also the video in the
opened Firefox Nightly browser lagged quite a bit. This has happened in
the past, but not that bad and long. Today for the first time, Linux
logged the warning below:
sched: DL replenish lagged too much
(This is from `kernel/sched/deadline.c`.)
I have no idea, if it’s related to the hardware itself, that causes it
to lag, that a suspend/resume cycle fixes, or if it’s related to the
USB-C controller that has bugs in that early generation, or if it’s
related to GNOME/Mutter (*mutter-common* 48~beta-3) or Firefox or the
Web video player used by the site.
As often the case with this, I have no way to reliably reproduce it, and
in this case to reproduce the warning. I can only say, that this warning
has not been logged in the available log files since September 2024.
Linux “6.11-rc0” was used then. Please find the log messages attached.
In case this information is not useful, should this happen again, it’d
be great if you could suggest what and how I should collect debugging
information next time.
Kind regards,
Paul
[-- Attachment #2: 20250220--dell-xps-13-9360--linux-6.14-rc3-00060-g6537cfb395f3.txt --]
[-- Type: text/plain, Size: 509174 bytes --]
[ 0.000000] Linux version 6.14.0-rc3-00060-g6537cfb395f3 (build@bohemianrhapsody.molgen.mpg.de) (gcc (Debian 14.2.0-17) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #83 SMP PREEMPT_DYNAMIC Tue Feb 18 23:43:10 CET 2025
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.14.0-rc3-00060-g6537cfb395f3 root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer mem_sleep_default=deep log_buf_len=8M cryptomgr.notests
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000556aafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000556ab000-0x00000000556abfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000556ac000-0x00000000556acfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000556ad000-0x0000000064df3fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000064df4000-0x000000006517ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000065180000-0x00000000651c3fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000651c4000-0x000000006f871fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000006f872000-0x000000006fffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x0000000077ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000078000000-0x00000000785fffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000078600000-0x000000007c7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004817fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] e820: update [mem 0x51863018-0x51873057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000051863017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000051863018-0x0000000051873057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000051873058-0x00000000556aafff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000556ab000-0x00000000556abfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000556ac000-0x00000000556acfff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000556ad000-0x0000000064df3fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000064df4000-0x000000006517ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000065180000-0x00000000651c3fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000651c4000-0x000000006f871fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000006f872000-0x000000006fffefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000006ffff000-0x000000006fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000070000000-0x0000000077ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000078000000-0x00000000785fffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000078600000-0x000000007c7fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000004817fffff] usable
[ 0.000000] efi: EFI v2.4 by American Megatrends
[ 0.000000] efi: ACPI=0x6518d000 ACPI 2.0=0x6518d000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 TPMFinalLog=0x6f812000 ESRT=0x6fc86698 MEMATTR=0x62675018 INITRD=0x5577da98 TPMEventLog=0x65188018
[ 0.000000] efi: Remove mem36: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
[ 0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved
[ 0.000000] efi: Not removing mem37: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[ 0.000000] efi: Not removing mem38: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem39: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[ 0.000000] efi: Remove mem40: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022
[ 0.000000] DMI: Memory slots populated: 2/2
[ 0.000000] tsc: Detected 2900.000 MHz processor
[ 0.000000] tsc: Detected 2899.886 MHz TSC
[ 0.000665] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000667] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000673] last_pfn = 0x481800 max_arch_pfn = 0x400000000
[ 0.000677] MTRR map: 4 entries (3 fixed + 1 variable; max 23), built from 10 variable MTRRs
[ 0.000678] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000959] last_pfn = 0x78600 max_arch_pfn = 0x400000000
[ 0.006937] esrt: Reserving ESRT space from 0x000000006fc86698 to 0x000000006fc866d0.
[ 0.006944] Using GB pages for direct mapping
[ 0.013414] printk: log buffer data + meta data: 8388608 + 29360128 = 37748736 bytes
[ 0.013415] printk: early log buf free: 125336(95%)
[ 0.013416] Secure boot disabled
[ 0.013417] RAMDISK: [mem 0x51874000-0x52585fff]
[ 0.013421] ACPI: Early table checksum verification disabled
[ 0.013424] ACPI: RSDP 0x000000006518D000 000024 (v02 DELL )
[ 0.013427] ACPI: XSDT 0x000000006518D0C8 00010C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.013431] ACPI: FACP 0x00000000651B2A48 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.013435] ACPI: DSDT 0x000000006518D260 0257E7 (v02 DELL CBX3 01072009 INTL 20160422)
[ 0.013438] ACPI: FACS 0x000000006F86F180 000040
[ 0.013439] ACPI: APIC 0x00000000651B2B58 000084 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.013441] ACPI: FPDT 0x00000000651B2BE0 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.013443] ACPI: FIDT 0x00000000651B2C28 0000AC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.013445] ACPI: MCFG 0x00000000651B2CD8 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.013447] ACPI: HPET 0x00000000651B2D18 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
[ 0.013449] ACPI: SSDT 0x00000000651B2D50 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.013451] ACPI: BOOT 0x00000000651B30B0 000028 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.013452] ACPI: SSDT 0x00000000651B30D8 0012CF (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.013454] ACPI: HPET 0x00000000651B43A8 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F)
[ 0.013456] ACPI: SSDT 0x00000000651B43E0 000D84 (v02 INTEL xh_rvp07 00000000 INTL 20160422)
[ 0.013459] ACPI: UEFI 0x00000000651B5168 000042 (v01 00000000 00000000)
[ 0.013461] ACPI: SSDT 0x00000000651B51B0 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.013462] ACPI: LPIT 0x00000000651B6090 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
[ 0.013464] ACPI: WSMT 0x00000000651B6128 000028 (v01 DELL CBX3 00000000 MSFT 0000005F)
[ 0.013466] ACPI: SSDT 0x00000000651B6150 000161 (v02 INTEL HdaDsp 00000000 INTL 20160422)
[ 0.013468] ACPI: SSDT 0x00000000651B62B8 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.013470] ACPI: SSDT 0x00000000651B6558 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 0.013472] ACPI: SSDT 0x00000000651B9560 0000DB (v02 INTEL TbtTypeC 00000000 INTL 20160422)
[ 0.013474] ACPI: DBGP 0x00000000651B9640 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.013476] ACPI: DBG2 0x00000000651B9678 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.013478] ACPI: SSDT 0x00000000651B96D0 0007DD (v02 INTEL UsbCTabl 00001000 INTL 20160422)
[ 0.013480] ACPI: SSDT 0x00000000651B9EB0 0084F1 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[ 0.013481] ACPI: SLIC 0x00000000651C23A8 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.013483] ACPI: NHLT 0x00000000651C2520 00002D (v00 INTEL EDK2 00000002 01000013)
[ 0.013485] ACPI: BGRT 0x00000000651C2550 000038 (v00 01072009 AMI 00010013)
[ 0.013487] ACPI: TPM2 0x00000000651C2588 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
[ 0.013489] ACPI: ASF! 0x00000000651C25C0 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.013491] ACPI: DMAR 0x00000000651C2660 0000F0 (v01 INTEL KBL 00000001 INTL 00000001)
[ 0.013492] ACPI: Reserving FACP table memory at [mem 0x651b2a48-0x651b2b53]
[ 0.013494] ACPI: Reserving DSDT table memory at [mem 0x6518d260-0x651b2a46]
[ 0.013494] ACPI: Reserving FACS table memory at [mem 0x6f86f180-0x6f86f1bf]
[ 0.013495] ACPI: Reserving APIC table memory at [mem 0x651b2b58-0x651b2bdb]
[ 0.013495] ACPI: Reserving FPDT table memory at [mem 0x651b2be0-0x651b2c23]
[ 0.013496] ACPI: Reserving FIDT table memory at [mem 0x651b2c28-0x651b2cd3]
[ 0.013497] ACPI: Reserving MCFG table memory at [mem 0x651b2cd8-0x651b2d13]
[ 0.013497] ACPI: Reserving HPET table memory at [mem 0x651b2d18-0x651b2d4f]
[ 0.013498] ACPI: Reserving SSDT table memory at [mem 0x651b2d50-0x651b30a8]
[ 0.013498] ACPI: Reserving BOOT table memory at [mem 0x651b30b0-0x651b30d7]
[ 0.013499] ACPI: Reserving SSDT table memory at [mem 0x651b30d8-0x651b43a6]
[ 0.013499] ACPI: Reserving HPET table memory at [mem 0x651b43a8-0x651b43df]
[ 0.013500] ACPI: Reserving SSDT table memory at [mem 0x651b43e0-0x651b5163]
[ 0.013500] ACPI: Reserving UEFI table memory at [mem 0x651b5168-0x651b51a9]
[ 0.013501] ACPI: Reserving SSDT table memory at [mem 0x651b51b0-0x651b608d]
[ 0.013502] ACPI: Reserving LPIT table memory at [mem 0x651b6090-0x651b6123]
[ 0.013502] ACPI: Reserving WSMT table memory at [mem 0x651b6128-0x651b614f]
[ 0.013503] ACPI: Reserving SSDT table memory at [mem 0x651b6150-0x651b62b0]
[ 0.013503] ACPI: Reserving SSDT table memory at [mem 0x651b62b8-0x651b6556]
[ 0.013504] ACPI: Reserving SSDT table memory at [mem 0x651b6558-0x651b9559]
[ 0.013504] ACPI: Reserving SSDT table memory at [mem 0x651b9560-0x651b963a]
[ 0.013505] ACPI: Reserving DBGP table memory at [mem 0x651b9640-0x651b9673]
[ 0.013505] ACPI: Reserving DBG2 table memory at [mem 0x651b9678-0x651b96cb]
[ 0.013506] ACPI: Reserving SSDT table memory at [mem 0x651b96d0-0x651b9eac]
[ 0.013507] ACPI: Reserving SSDT table memory at [mem 0x651b9eb0-0x651c23a0]
[ 0.013507] ACPI: Reserving SLIC table memory at [mem 0x651c23a8-0x651c251d]
[ 0.013508] ACPI: Reserving NHLT table memory at [mem 0x651c2520-0x651c254c]
[ 0.013508] ACPI: Reserving BGRT table memory at [mem 0x651c2550-0x651c2587]
[ 0.013509] ACPI: Reserving TPM2 table memory at [mem 0x651c2588-0x651c25bb]
[ 0.013509] ACPI: Reserving ASF! table memory at [mem 0x651c25c0-0x651c265f]
[ 0.013510] ACPI: Reserving DMAR table memory at [mem 0x651c2660-0x651c274f]
[ 0.013627] No NUMA configuration found
[ 0.013628] Faking a node at [mem 0x0000000000000000-0x00000004817fffff]
[ 0.013637] NODE_DATA(0) allocated [mem 0x47f3d5680-0x47f3fffff]
[ 0.013802] Zone ranges:
[ 0.013803] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.013804] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.013805] Normal [mem 0x0000000100000000-0x00000004817fffff]
[ 0.013807] Device empty
[ 0.013807] Movable zone start for each node
[ 0.013810] Early memory node ranges
[ 0.013810] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.013811] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.013812] node 0: [mem 0x0000000000100000-0x00000000556aafff]
[ 0.013812] node 0: [mem 0x00000000556ad000-0x0000000064df3fff]
[ 0.013813] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
[ 0.013814] node 0: [mem 0x0000000078000000-0x00000000785fffff]
[ 0.013814] node 0: [mem 0x0000000100000000-0x00000004817fffff]
[ 0.013816] Initmem setup node 0 [mem 0x0000000000001000-0x00000004817fffff]
[ 0.013820] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.013821] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.013852] On node 0, zone DMA: 98 pages in unavailable ranges
[ 0.016213] On node 0, zone DMA32: 2 pages in unavailable ranges
[ 0.016650] On node 0, zone DMA32: 45579 pages in unavailable ranges
[ 0.017171] On node 0, zone Normal: 31232 pages in unavailable ranges
[ 0.017426] On node 0, zone Normal: 26624 pages in unavailable ranges
[ 0.017433] Reserving Intel graphics memory at [mem 0x7a800000-0x7c7fffff]
[ 0.017621] ACPI: PM-Timer IO Port: 0x1808
[ 0.017625] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.017627] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.017627] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.017628] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.017654] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.017656] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.017657] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.017660] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.017661] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.017667] e820: update [mem 0x6225f000-0x623ebfff] usable ==> reserved
[ 0.017674] TSC deadline timer available
[ 0.017678] CPU topo: Max. logical packages: 1
[ 0.017678] CPU topo: Max. logical dies: 1
[ 0.017679] CPU topo: Max. dies per package: 1
[ 0.017682] CPU topo: Max. threads per core: 2
[ 0.017683] CPU topo: Num. cores per package: 2
[ 0.017683] CPU topo: Num. threads per package: 4
[ 0.017684] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.017701] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.017702] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.017704] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.017705] PM: hibernation: Registered nosave memory: [mem 0x51863000-0x51863fff]
[ 0.017706] PM: hibernation: Registered nosave memory: [mem 0x51873000-0x51873fff]
[ 0.017708] PM: hibernation: Registered nosave memory: [mem 0x556ab000-0x556abfff]
[ 0.017708] PM: hibernation: Registered nosave memory: [mem 0x556ac000-0x556acfff]
[ 0.017710] PM: hibernation: Registered nosave memory: [mem 0x6225f000-0x623ebfff]
[ 0.017711] PM: hibernation: Registered nosave memory: [mem 0x64df4000-0x6517ffff]
[ 0.017711] PM: hibernation: Registered nosave memory: [mem 0x65180000-0x651c3fff]
[ 0.017712] PM: hibernation: Registered nosave memory: [mem 0x651c4000-0x6f871fff]
[ 0.017712] PM: hibernation: Registered nosave memory: [mem 0x6f872000-0x6fffefff]
[ 0.017714] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x77ffffff]
[ 0.017715] PM: hibernation: Registered nosave memory: [mem 0x78600000-0x7c7fffff]
[ 0.017715] PM: hibernation: Registered nosave memory: [mem 0x7c800000-0xfdffffff]
[ 0.017716] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.017716] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.017717] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.017717] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.017718] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.017718] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[ 0.017720] [mem 0x7c800000-0xfdffffff] available for PCI devices
[ 0.017724] Booting paravirtualized kernel on bare hardware
[ 0.017726] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.022122] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.022395] percpu: Embedded 94 pages/cpu s290816 r65536 d28672 u524288
[ 0.022401] pcpu-alloc: s290816 r65536 d28672 u524288 alloc=1*2097152
[ 0.022403] pcpu-alloc: [0] 0 1 2 3
[ 0.022425] Kernel command line: BOOT_IMAGE=/vmlinuz-6.14.0-rc3-00060-g6537cfb395f3 root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer mem_sleep_default=deep log_buf_len=8M cryptomgr.notests
[ 0.022485] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.14.0-rc3-00060-g6537cfb395f3", will be passed to user space.
[ 0.022509] random: crng init done
[ 0.024007] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.024757] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.024810] Fallback order for Node 0: 0
[ 0.024812] Built 1 zonelists, mobility grouping on. Total pages: 4090767
[ 0.024813] Policy zone: Normal
[ 0.024819] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.024826] software IO TLB: area num 4.
[ 0.043361] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.043363] kmemleak: Kernel memory leak detector disabled
[ 0.043390] ftrace: allocating 43255 entries in 169 pages
[ 0.057428] ftrace: allocated 169 pages with 4 groups
[ 0.058107] Dynamic Preempt: voluntary
[ 0.058148] rcu: Preemptible hierarchical RCU implementation.
[ 0.058148] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.058149] Trampoline variant of Tasks RCU enabled.
[ 0.058150] Rude variant of Tasks RCU enabled.
[ 0.058150] Tracing variant of Tasks RCU enabled.
[ 0.058151] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.058151] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.058156] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.058157] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.058158] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.062112] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.062320] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.062499] spurious 8259A interrupt: IRQ7.
[ 0.062524] Console: colour dummy device 80x25
[ 0.062526] printk: legacy console [tty0] enabled
[ 0.062571] ACPI: Core revision 20240827
[ 0.062710] hpet: HPET dysfunctional in PC10. Force disabled.
[ 0.062763] APIC: Switch to symmetric I/O mode setup
[ 0.062766] DMAR: Host address width 39
[ 0.062767] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.062772] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.062774] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.062778] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.062780] DMAR: RMRR base: 0x00000064ec2000 end: 0x00000064ee1fff
[ 0.062782] DMAR: RMRR base: 0x0000007a000000 end: 0x0000007c7fffff
[ 0.062783] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.062784] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.062785] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.062786] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.062787] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.064406] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.064407] x2apic enabled
[ 0.064462] APIC: Switched APIC routing to: cluster x2apic
[ 0.068380] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29ccd767b87, max_idle_ns: 440795223720 ns
[ 0.068386] Calibrating delay loop (skipped), value calculated using timer frequency.. 5799.77 BogoMIPS (lpj=11599544)
[ 0.068415] CPU0: Thermal monitoring enabled (TM1)
[ 0.068455] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.068456] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.068460] process: using mwait in idle threads
[ 0.068463] Spectre V2 : User space: Vulnerable
[ 0.068464] Speculative Store Bypass: Vulnerable
[ 0.068467] SRBDS: Vulnerable
[ 0.068471] GDS: Vulnerable
[ 0.068476] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.068477] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.068478] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.068479] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.068480] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.068481] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.068482] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.068483] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.068484] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.072384] Freeing SMP alternatives memory: 36K
[ 0.072384] pid_max: default: 32768 minimum: 301
[ 0.072384] LSM: initializing lsm=capability,landlock,apparmor,bpf
[ 0.072384] landlock: Up and running.
[ 0.072384] AppArmor: AppArmor initialized
[ 0.072384] LSM support for eBPF active
[ 0.072384] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.072384] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.072384] smpboot: CPU0: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[ 0.072384] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.072384] ... version: 4
[ 0.072384] ... bit width: 48
[ 0.072384] ... generic registers: 4
[ 0.072384] ... value mask: 0000ffffffffffff
[ 0.072384] ... max period: 00007fffffffffff
[ 0.072384] ... fixed-purpose events: 3
[ 0.072384] ... event mask: 000000070000000f
[ 0.072384] signal: max sigframe size: 1616
[ 0.072384] Estimated ratio of average max frequency by base frequency (times 1024): 1235
[ 0.072384] rcu: Hierarchical SRCU implementation.
[ 0.072384] rcu: Max phase no-delay instances is 1000.
[ 0.072384] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.072384] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.072384] smp: Bringing up secondary CPUs ...
[ 0.072384] smpboot: x86: Booting SMP configuration:
[ 0.072384] .... node #0, CPUs: #1 #2 #3
[ 0.072384] smp: Brought up 1 node, 4 CPUs
[ 0.072384] smpboot: Total of 4 processors activated (23199.08 BogoMIPS)
[ 0.092771] node 0 deferred pages initialised in 24ms
[ 0.092775] Memory: 15904000K/16363068K available (14144K kernel code, 2558K rwdata, 10220K rodata, 2920K init, 6292K bss, 448340K reserved, 0K cma-reserved)
[ 0.092844] devtmpfs: initialized
[ 0.092844] x86/mm: Memory block size: 128MB
[ 0.093460] ACPI: PM: Registering ACPI NVS region [mem 0x556ab000-0x556abfff] (4096 bytes)
[ 0.093460] ACPI: PM: Registering ACPI NVS region [mem 0x651c4000-0x6f871fff] (174776320 bytes)
[ 0.097083] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.097090] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.097141] pinctrl core: initialized pinctrl subsystem
[ 0.097582] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.097775] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.097891] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.098018] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.098034] audit: initializing netlink subsys (disabled)
[ 0.098051] audit: type=2000 audit(1739949003.000:1): state=initialized audit_enabled=0 res=1
[ 0.098051] thermal_sys: Registered thermal governor 'fair_share'
[ 0.098051] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.098051] thermal_sys: Registered thermal governor 'step_wise'
[ 0.098051] thermal_sys: Registered thermal governor 'user_space'
[ 0.098051] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.098051] cpuidle: using governor ladder
[ 0.098051] cpuidle: using governor menu
[ 0.098051] Simple Boot Flag at 0x47 set to 0x80
[ 0.098051] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.098051] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.098051] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[ 0.098051] PCI: Using configuration type 1 for base access
[ 0.098051] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.098051] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.098051] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.098051] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.098051] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.098051] ACPI: Added _OSI(Module Device)
[ 0.098051] ACPI: Added _OSI(Processor Device)
[ 0.098051] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.098051] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.133836] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.140267] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.144578] ACPI: Dynamic OEM Table Load:
[ 0.144591] ACPI: SSDT 0xFFFF9EA7C13DC400 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.145373] ACPI: Dynamic OEM Table Load:
[ 0.145378] ACPI: SSDT 0xFFFF9EA7C19E1800 0006F6 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.146765] ACPI: Dynamic OEM Table Load:
[ 0.146769] ACPI: SSDT 0xFFFF9EA7C19E6800 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.147757] ACPI: Dynamic OEM Table Load:
[ 0.147761] ACPI: SSDT 0xFFFF9EA7C13E8E00 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.150120] ACPI: EC: EC started
[ 0.150121] ACPI: EC: interrupt blocked
[ 0.154765] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.154767] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[ 0.154769] ACPI: Interpreter enabled
[ 0.154802] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.154803] ACPI: Using IOAPIC for interrupt routing
[ 0.154836] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.154837] PCI: Using E820 reservations for host bridge windows
[ 0.155343] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.159259] ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource
[ 0.159504] ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource
[ 0.159749] ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource
[ 0.159993] ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource
[ 0.160241] ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource
[ 0.160502] ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource
[ 0.161089] ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource
[ 0.161332] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource
[ 0.161576] ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource
[ 0.161820] ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource
[ 0.162062] ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource
[ 0.162308] ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource
[ 0.162553] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource
[ 0.162803] ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource
[ 0.163049] ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource
[ 0.163294] ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource
[ 0.163537] ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource
[ 0.164551] ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource
[ 0.164794] ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource
[ 0.165039] ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource
[ 0.183101] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.183107] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.183259] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ 0.183538] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR]
[ 0.183539] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.184246] PCI host bridge to bus 0000:00
[ 0.184249] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.184251] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.184253] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.184254] pci_bus 0000:00: root bus resource [mem 0x7c800000-0xdfffffff window]
[ 0.184255] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.184257] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.184271] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000 conventional PCI endpoint
[ 0.184336] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
[ 0.184348] pci 0000:00:02.0: BAR 0 [mem 0xdb000000-0xdbffffff 64bit]
[ 0.184350] pci 0000:00:02.0: BAR 2 [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.184352] pci 0000:00:02.0: BAR 4 [io 0xf000-0xf03f]
[ 0.184361] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.184483] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 conventional PCI endpoint
[ 0.184498] pci 0000:00:04.0: BAR 0 [mem 0xdc420000-0xdc427fff 64bit]
[ 0.184727] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 conventional PCI endpoint
[ 0.184760] pci 0000:00:14.0: BAR 0 [mem 0xdc410000-0xdc41ffff 64bit]
[ 0.184790] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.185221] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 conventional PCI endpoint
[ 0.185253] pci 0000:00:14.2: BAR 0 [mem 0xdc434000-0xdc434fff 64bit]
[ 0.185362] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 conventional PCI endpoint
[ 0.185413] pci 0000:00:15.0: BAR 0 [mem 0xdc433000-0xdc433fff 64bit]
[ 0.185691] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 conventional PCI endpoint
[ 0.185743] pci 0000:00:15.1: BAR 0 [mem 0xdc432000-0xdc432fff 64bit]
[ 0.186004] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 conventional PCI endpoint
[ 0.186032] pci 0000:00:16.0: BAR 0 [mem 0xdc431000-0xdc431fff 64bit]
[ 0.186060] pci 0000:00:16.0: PME# supported from D3hot
[ 0.186345] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 PCIe Root Port
[ 0.186362] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.186367] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.186374] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.186392] pci 0000:00:1c.0: broken device, retraining non-functional downstream link at 2.5GT/s
[ 1.184405] pci 0000:00:1c.0: retraining failed
[ 2.184500] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 2.184919] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400 PCIe Root Port
[ 2.184936] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 2.184940] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff]
[ 2.184990] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 2.185357] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400 PCIe Root Port
[ 2.185373] pci 0000:00:1c.5: PCI bridge to [bus 3b]
[ 2.185377] pci 0000:00:1c.5: bridge window [mem 0xdc300000-0xdc3fffff]
[ 2.185426] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 2.185800] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400 PCIe Root Port
[ 2.185816] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[ 2.185820] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 2.185869] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 2.186263] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100 conventional PCI endpoint
[ 2.186523] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 conventional PCI endpoint
[ 2.186559] pci 0000:00:1f.2: BAR 0 [mem 0xdc42c000-0xdc42ffff]
[ 2.186732] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380 conventional PCI endpoint
[ 2.186775] pci 0000:00:1f.3: BAR 0 [mem 0xdc428000-0xdc42bfff 64bit]
[ 2.186781] pci 0000:00:1f.3: BAR 4 [mem 0xdc400000-0xdc40ffff 64bit]
[ 2.186819] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 2.187337] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 conventional PCI endpoint
[ 2.187469] pci 0000:00:1f.4: BAR 0 [mem 0xdc430000-0xdc4300ff 64bit]
[ 2.187479] pci 0000:00:1f.4: BAR 4 [io 0xf040-0xf05f]
[ 2.187728] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 2.188149] pci 0000:3a:00.0: [168c:003e] type 00 class 0x028000 PCIe Endpoint
[ 2.188500] pci 0000:3a:00.0: BAR 0 [mem 0xdc000000-0xdc1fffff 64bit]
[ 2.189478] pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold
[ 2.191133] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 2.191216] pci 0000:3b:00.0: [10ec:525a] type 00 class 0xff0000 PCIe Endpoint
[ 2.191262] pci 0000:3b:00.0: BAR 1 [mem 0xdc300000-0xdc300fff]
[ 2.191342] pci 0000:3b:00.0: supports D1 D2
[ 2.191343] pci 0000:3b:00.0: PME# supported from D1 D2 D3hot D3cold
[ 2.191653] pci 0000:00:1c.5: PCI bridge to [bus 3b]
[ 2.191732] pci 0000:3c:00.0: [1c5c:1284] type 00 class 0x010802 PCIe Endpoint
[ 2.191774] pci 0000:3c:00.0: BAR 0 [mem 0xdc200000-0xdc203fff 64bit]
[ 2.191855] pci 0000:3c:00.0: PME# supported from D0 D1 D3hot
[ 2.192174] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[ 2.194988] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 2.194988] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 2.194988] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 2.194988] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 2.194988] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[ 2.194988] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[ 2.194988] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 2.194988] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[ 2.204086] ACPI: EC: interrupt unblocked
[ 2.204088] ACPI: EC: event unblocked
[ 2.204093] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 2.204094] ACPI: EC: GPE=0x14
[ 2.204096] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete
[ 2.204098] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events
[ 2.204387] iommu: Default domain type: Translated
[ 2.204390] iommu: DMA domain TLB invalidation policy: lazy mode
[ 2.204542] pps_core: LinuxPPS API ver. 1 registered
[ 2.204543] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.204545] PTP clock support registered
[ 2.204553] EDAC MC: Ver: 3.0.0
[ 2.204796] efivars: Registered efivars operations
[ 2.204796] NetLabel: Initializing
[ 2.204796] NetLabel: domain hash size = 128
[ 2.204796] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 2.204796] NetLabel: unlabeled traffic allowed by default
[ 2.204796] PCI: Using ACPI for IRQ routing
[ 2.229967] PCI: pci_cache_line_size set to 64 bytes
[ 2.230346] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 2.230348] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 2.230349] e820: reserve RAM buffer [mem 0x51863018-0x53ffffff]
[ 2.230350] e820: reserve RAM buffer [mem 0x556ab000-0x57ffffff]
[ 2.230351] e820: reserve RAM buffer [mem 0x6225f000-0x63ffffff]
[ 2.230352] e820: reserve RAM buffer [mem 0x64df4000-0x67ffffff]
[ 2.230353] e820: reserve RAM buffer [mem 0x78600000-0x7bffffff]
[ 2.230354] e820: reserve RAM buffer [mem 0x481800000-0x483ffffff]
[ 2.230383] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 2.230383] pci 0000:00:02.0: vgaarb: bridge control possible
[ 2.230383] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 2.230383] vgaarb: loaded
[ 2.230383] clocksource: Switched to clocksource tsc-early
[ 2.230383] VFS: Disk quotas dquot_6.6.0
[ 2.230383] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.230383] AppArmor: AppArmor Filesystem Enabled
[ 2.230383] pnp: PnP ACPI init
[ 2.230383] system 00:00: [io 0x0680-0x069f] has been reserved
[ 2.230383] system 00:00: [io 0xffff] has been reserved
[ 2.230383] system 00:00: [io 0xffff] has been reserved
[ 2.230383] system 00:00: [io 0xffff] has been reserved
[ 2.230383] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 2.230383] system 00:00: [io 0x164e-0x164f] has been reserved
[ 2.230383] system 00:02: [io 0x1854-0x1857] has been reserved
[ 2.230383] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 2.230383] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 2.230383] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 2.230383] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 2.230383] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 2.230383] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 2.230383] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 2.230383] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 2.230383] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 2.230383] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 2.230383] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 2.230383] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 2.230383] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 2.230383] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 2.230383] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 2.230383] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 2.230383] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 2.230383] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 2.230595] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[ 2.230597] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[ 2.233659] pnp: PnP ACPI: found 9 devices
[ 2.239003] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 2.239051] NET: Registered PF_INET protocol family
[ 2.239163] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 2.249838] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 2.249861] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 2.249918] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 2.250109] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 2.250302] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.250377] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ 2.250434] UDP hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 2.250499] UDP-Lite hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 2.250574] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 2.250579] NET: Registered PF_XDP protocol family
[ 2.250587] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-39] add_size 1000
[ 2.250596] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]: assigned
[ 2.250599] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 2.250601] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 2.250605] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 2.250607] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 2.250611] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 2.250614] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff]
[ 2.250619] pci 0000:00:1c.5: PCI bridge to [bus 3b]
[ 2.250622] pci 0000:00:1c.5: bridge window [mem 0xdc300000-0xdc3fffff]
[ 2.250626] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[ 2.250629] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 2.250634] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 2.250635] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 2.250637] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
[ 2.250638] pci_bus 0000:00: resource 7 [mem 0x7c800000-0xdfffffff window]
[ 2.250639] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 2.250640] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 2.250641] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff]
[ 2.250642] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 2.250643] pci_bus 0000:3a: resource 1 [mem 0xdc000000-0xdc1fffff]
[ 2.250644] pci_bus 0000:3b: resource 1 [mem 0xdc300000-0xdc3fffff]
[ 2.250645] pci_bus 0000:3c: resource 1 [mem 0xdc200000-0xdc2fffff]
[ 2.251219] PCI: CLS 0 bytes, default 64
[ 2.251262] pci 0000:00:1f.1: [8086:9d20] type 00 class 0x058000 conventional PCI endpoint
[ 2.251400] pci 0000:00:1f.1: BAR 0 [mem 0xfd000000-0xfdffffff 64bit]
[ 2.251531] DMAR: ACPI device "device:79" under DMAR at fed91000 as 00:15.0
[ 2.251535] DMAR: ACPI device "device:7a" under DMAR at fed91000 as 00:15.1
[ 2.251545] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.251546] software IO TLB: mapped [mem 0x000000005e25f000-0x000000006225f000] (64MB)
[ 2.251591] Unpacking initramfs...
[ 2.251593] sgx: EPC section 0x70200000-0x75f7ffff
[ 2.252525] Initialise system trusted keyrings
[ 2.252550] Key type blacklist registered
[ 2.252667] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 2.252709] zbud: loaded
[ 2.252927] fuse: init (API version 7.42)
[ 2.253193] Key type asymmetric registered
[ 2.253198] Asymmetric key parser 'x509' registered
[ 2.275069] Freeing initrd memory: 13384K
[ 2.278285] alg: self-tests disabled
[ 2.278345] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 2.278368] io scheduler mq-deadline registered
[ 2.278964] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.279654] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.281579] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.281582] ACPI: thermal: Thermal Zone [THM] (25 C)
[ 2.281741] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.282445] hpet_acpi_add: no address or irqs in _CRS
[ 2.294232] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 4)
[ 2.329417] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.329662] i8042: Warning: Keylock active
[ 2.332062] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.332079] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.332167] mousedev: PS/2 mouse device common for all mice
[ 2.332180] rtc_cmos 00:01: RTC can wake from S4
[ 2.332858] rtc_cmos 00:01: registered as rtc0
[ 2.332985] rtc_cmos 00:01: setting system clock to 2025-02-19T07:10:06 UTC (1739949006)
[ 2.333018] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[ 2.333156] intel_pstate: Intel P-state driver initializing
[ 2.333279] intel_pstate: HWP enabled
[ 2.333515] efifb: probing for efifb
[ 2.333523] efifb: framebuffer at 0x90000000, using 22500k, total 22500k
[ 2.333525] efifb: mode is 3200x1800x32, linelength=12800, pages=1
[ 2.333526] efifb: scrolling: redraw
[ 2.333526] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.333606] Console: switching to colour frame buffer device 200x56
[ 2.336879] fb0: EFI VGA frame buffer device
[ 2.337021] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.337056] NET: Registered PF_INET6 protocol family
[ 2.340719] Segment Routing with IPv6
[ 2.340732] In-situ OAM (IOAM) with IPv6
[ 2.340753] mip6: Mobile IPv6
[ 2.340757] NET: Registered PF_PACKET protocol family
[ 2.340782] mpls_gso: MPLS GSO support
[ 2.340942] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 2.340971] microcode: Current revision: 0x000000f6
[ 2.340972] microcode: Updated early from: 0x000000f0
[ 2.341040] IPI shorthand broadcast: enabled
[ 2.341894] sched_clock: Marking stable (2335091536, 5937974)->(2358893180, -17863670)
[ 2.342034] registered taskstats version 1
[ 2.342139] Loading compiled-in X.509 certificates
[ 2.343605] Demotion targets for Node 0: null
[ 2.343632] Key type .fscrypt registered
[ 2.343633] Key type fscrypt-provisioning registered
[ 2.348057] cryptd: max_cpu_qlen set to 1000
[ 2.348684] AES CTR mode by8 optimization enabled
[ 2.358048] Key type encrypted registered
[ 2.358054] AppArmor: AppArmor sha256 policy hashing enabled
[ 2.358491] RAS: Correctable Errors collector initialized.
[ 2.367079] clk: Disabling unused clocks
[ 2.367941] Freeing unused decrypted memory: 2036K
[ 2.368338] Freeing unused kernel image (initmem) memory: 2920K
[ 2.368358] Write protecting the kernel read-only data: 24576k
[ 2.368558] Freeing unused kernel image (text/rodata gap) memory: 188K
[ 2.368575] Freeing unused kernel image (rodata/data gap) memory: 20K
[ 2.379756] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.379808] Run /init as init process
[ 2.379809] with arguments:
[ 2.379810] /init
[ 2.379811] with environment:
[ 2.379812] HOME=/
[ 2.379813] TERM=linux
[ 2.379813] BOOT_IMAGE=/vmlinuz-6.14.0-rc3-00060-g6537cfb395f3
[ 2.467396] nvme nvme0: pci function 0000:3c:00.0
[ 2.484267] nvme nvme0: 4/0/0 default/read/poll queues
[ 2.492747] nvme0n1: p1 p2 p3 p4
[ 2.545196] device-mapper: uevent: version 1.0.3
[ 2.545405] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
[ 3.270191] tsc: Refined TSC clocksource calibration: 2904.009 MHz
[ 3.270214] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc0e73964, max_idle_ns: 440795294805 ns
[ 3.270286] clocksource: Switched to clocksource tsc
[ 8.681381] PM: Image not found (code -22)
[ 8.750883] EXT4-fs (dm-0): mounted filesystem 32e29882-d94d-4a92-9ee4-4d03002bfa29 ro with ordered data mode. Quota mode: none.
[ 8.862646] systemd[1]: Inserted module 'autofs4'
[ 8.901412] systemd[1]: systemd 257.3-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE)
[ 8.901426] systemd[1]: Detected architecture x86-64.
[ 8.904489] systemd[1]: Hostname set to <abreu>.
[ 9.092649] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[ 9.131588] systemd-sysv-generator[371]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[ 9.131592] systemd-sysv-generator[371]: Please update package to include a native systemd unit file.
[ 9.131594] systemd-sysv-generator[371]: ! This compatibility logic is deprecated, expect removal soon. !
[ 9.257915] systemd[1]: Queued start job for default target graphical.target.
[ 9.287165] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 9.287578] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 9.287970] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice - Encrypted Volume Units Service Slice.
[ 9.288376] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 9.288641] systemd[1]: Created slice user.slice - User and Session Slice.
[ 9.288714] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 9.288775] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 9.288970] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 9.288998] systemd[1]: Expecting device dev-disk-by\x2ddiskseq-1\x2dpart4.device - /dev/disk/by-diskseq/1-part4...
[ 9.289009] systemd[1]: Expecting device dev-disk-by\x2duuid-2d23fd4c\x2d5d03\x2d4e1a\x2d8a42\x2d0e859d1f00d8.device - /dev/disk/by-uuid/2d23fd4c-5d03-4e1a-8a42-0e859d1f00d8...
[ 9.289018] systemd[1]: Expecting device dev-disk-by\x2duuid-61be8f50\x2d69c5\x2d49a5\x2dbcad\x2d3f4521e9c7b5.device - /dev/disk/by-uuid/61be8f50-69c5-49a5-bcad-3f4521e9c7b5...
[ 9.289029] systemd[1]: Expecting device dev-disk-by\x2duuid-96BD\x2d5653.device - /dev/disk/by-uuid/96BD-5653...
[ 9.289053] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 9.289087] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[ 9.289107] systemd[1]: Reached target paths.target - Path Units.
[ 9.289131] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 9.289146] systemd[1]: Reached target slices.target - Slice Units.
[ 9.289186] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 9.290911] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
[ 9.292180] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption.
[ 9.292311] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 9.292423] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 9.292550] systemd[1]: Listening on systemd-journald.socket - Journal Sockets.
[ 9.292607] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 9.292631] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 9.292721] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 9.292791] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 9.294108] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 9.294935] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 9.296238] systemd[1]: Mounting run-lock.mount - Legacy Locks Directory /run/lock...
[ 9.302129] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 9.303364] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 9.305034] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 9.313286] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 9.314837] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[ 9.318181] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 9.319535] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 9.319662] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 9.319733] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[ 9.328028] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 9.330140] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 9.330147] pstore: Using crash dump compression: deflate
[ 9.330177] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 9.332546] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 9.332614] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 9.336603] pstore: Registered efi_pstore as persistent store backend
[ 9.337408] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials...
[ 9.338289] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 9.340359] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[ 9.340480] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 9.340568] systemd[1]: Mounted run-lock.mount - Legacy Locks Directory /run/lock.
[ 9.340654] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 9.340735] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 9.344446] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 9.344850] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 9.346006] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[ 9.346514] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 9.346714] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 9.347168] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 9.347376] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[ 9.350797] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 9.351692] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 9.356826] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[ 9.358125] ACPI: bus type drm_connector registered
[ 9.360064] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 9.360257] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[ 9.360407] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 9.360515] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 9.366051] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials.
[ 9.366709] lp: driver loaded but no devices found
[ 9.369825] ppdev: user-space parallel port driver
[ 9.372877] EXT4-fs (dm-0): re-mounted 32e29882-d94d-4a92-9ee4-4d03002bfa29 r/w. Quota mode: none.
[ 9.373895] systemd-journald[385]: Collecting audit messages is disabled.
[ 9.374188] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 9.374593] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[ 9.374651] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 9.376292] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
[ 9.376335] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 9.386491] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully.
[ 9.386665] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met.
[ 9.390344] systemd[1]: Starting systemd-timesyncd.service - Network Time Synchronization...
[ 9.391945] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[ 9.392408] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 9.398124] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 9.398465] systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed.
[ 9.403010] systemd[1]: Started systemd-journald.service - Journal Service.
[ 9.426610] systemd-journald[385]: Received client request to flush runtime journal.
[ 9.556259] ACPI: AC: AC Adapter [AC] (on-line)
[ 9.557239] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 9.567124] ACPI: bus type USB registered
[ 9.567575] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input8
[ 9.567992] usbcore: registered new interface driver usbfs
[ 9.568006] usbcore: registered new interface driver hub
[ 9.568024] usbcore: registered new device driver usb
[ 9.573615] wmi_bus wmi_bus-PNP0C14:01: [Firmware Bug]: WQBC data block query control method not found
[ 9.580405] intel_pmc_core INT33A1:00: initialized
[ 9.582107] ACPI: button: Lid Switch [LID0]
[ 9.583792] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input9
[ 9.584665] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 9.584674] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 9.585744] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[ 9.592581] ACPI: button: Power Button [PBTN]
[ 9.592647] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10
[ 9.594040] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 9.595830] ACPI: button: Sleep Button [SBTN]
[ 9.596003] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input12
[ 9.598277] input: Intel Virtual Buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input11
[ 9.605388] ACPI: button: Power Button [PWRF]
[ 9.650377] hid: raw HID events driver (C) Jiri Kosina
[ 9.651415] rtsx_pci 0000:3b:00.0: enabling device (0000 -> 0002)
[ 9.769337] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 9.769628] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 9.771281] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 9.771287] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 9.771290] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 9.771325] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[ 9.771327] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.771328] usb usb1: Product: xHCI Host Controller
[ 9.771330] usb usb1: Manufacturer: Linux 6.14.0-rc3-00060-g6537cfb395f3 xhci-hcd
[ 9.771331] usb usb1: SerialNumber: 0000:00:14.0
[ 9.771619] hub 1-0:1.0: USB hub found
[ 9.771639] hub 1-0:1.0: 12 ports detected
[ 9.774365] input: Intel HID events as /devices/platform/INT33D5:00/input/input14
[ 9.777602] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[ 9.777610] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.777611] usb usb2: Product: xHCI Host Controller
[ 9.777612] usb usb2: Manufacturer: Linux 6.14.0-rc3-00060-g6537cfb395f3 xhci-hcd
[ 9.777613] usb usb2: SerialNumber: 0000:00:14.0
[ 9.777854] hub 2-0:1.0: USB hub found
[ 9.777867] hub 2-0:1.0: 6 ports detected
[ 9.779076] intel-hid INT33D5:00: platform supports 5 button array
[ 9.779110] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input15
[ 9.788581] intel_rapl_common: Found RAPL domain package
[ 9.788584] intel_rapl_common: Found RAPL domain dram
[ 9.819603] ACPI: battery: Slot [BAT0] (battery present)
[ 9.830402] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 9.830614] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 9.933982] Setting dangerous option enable_guc - tainting kernel
[ 9.933988] Setting dangerous option enable_fbc - tainting kernel
[ 9.934731] stackdepot: allocating hash table of 1048576 entries via kvcalloc
[ 9.937517] i915 0000:00:02.0: [drm] Found kabylake/ult (device ID 5916) integrated display version 9.00 stepping B0
[ 9.967664] Console: switching to colour dummy device 80x25
[ 9.968622] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 9.968989] input: PC Speaker as /devices/platform/pcspkr/input/input16
[ 9.969195] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 9.971279] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 9.971357] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 9.972242] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 9.975369] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 9.978310] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 9.978522] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 9.980478] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[ 9.981105] Adding 8387904k swap on /dev/nvme0n1p4. Priority:-2 extents:1 across:8387904k SS
[ 10.031185] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 10.053923] intel_rapl_common: Found RAPL domain package
[ 10.053929] intel_rapl_common: Found RAPL domain core
[ 10.053930] intel_rapl_common: Found RAPL domain uncore
[ 10.053931] intel_rapl_common: Found RAPL domain dram
[ 10.053932] intel_rapl_common: Found RAPL domain psys
[ 10.091929] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[ 10.091934] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[ 10.116681] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[ 10.116698] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[ 10.116707] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[ 10.119681] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ 10.141723] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 10.141737] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 10.141744] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 10.141750] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 10.141755] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 10.141760] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 10.181488] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0
[ 10.188922] usb 1-3: New USB device found, idVendor=0cf3, idProduct=e300, bcdDevice= 0.01
[ 10.188934] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 10.196908] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 10.224193] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17
[ 10.248807] fbcon: i915drmfb (fb0) is primary device
[ 10.251562] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input18
[ 10.282167] iTCO_vendor_support: vendor-support=0
[ 10.282373] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 10.282846] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input19
[ 10.283641] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input20
[ 10.284030] hid-generic 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
[ 10.284774] Console: switching to colour frame buffer device 200x56
[ 10.285631] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 10.286080] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.300173] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 10.305726] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 10.307532] ath10k_pci 0000:3a:00.0: enabling device (0000 -> 0002)
[ 10.309638] ath10k_pci 0000:3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 10.332837] ACPI: battery: new hook: Dell Primary Battery Extension
[ 10.337977] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[ 10.342094] snd_hda_codec_realtek hdaudioC0D0: ALC3246: picked fixup (pin match)
[ 10.362882] EXT4-fs (nvme0n1p2): mounted filesystem 2d23fd4c-5d03-4e1a-8a42-0e859d1f00d8 r/w with ordered data mode. Quota mode: none.
[ 10.379844] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 10.379849] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.379851] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 10.379853] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 10.379854] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 10.379855] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 10.379862] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 10.379863] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 10.387092] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input22
[ 10.387602] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input23
[ 10.387794] hid-multitouch 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
[ 10.475890] usb 1-4: New USB device found, idVendor=04f3, idProduct=2234, bcdDevice=11.11
[ 10.475897] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ 10.475900] usb 1-4: Product: Touchscreen
[ 10.475901] usb 1-4: Manufacturer: ELAN
[ 10.477488] audit: type=1400 audit(1739949014.637:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=563 comm="apparmor_parser"
[ 10.477494] audit: type=1400 audit(1739949014.637:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=563 comm="apparmor_parser"
[ 10.478285] audit: type=1400 audit(1739949014.641:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=565 comm="apparmor_parser"
[ 10.478290] audit: type=1400 audit(1739949014.641:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=565 comm="apparmor_parser"
[ 10.478292] audit: type=1400 audit(1739949014.641:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=565 comm="apparmor_parser"
[ 10.479004] audit: type=1400 audit(1739949014.641:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=562 comm="apparmor_parser"
[ 10.481592] audit: type=1400 audit(1739949014.641:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ipsec/stroke" pid=569 comm="apparmor_parser"
[ 10.484733] audit: type=1400 audit(1739949014.645:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="tcpdump" pid=566 comm="apparmor_parser"
[ 10.485150] audit: type=1400 audit(1739949014.645:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ipsec/charon" pid=568 comm="apparmor_parser"
[ 10.486371] audit: type=1400 audit(1739949014.649:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=570 comm="apparmor_parser"
[ 10.551128] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[ 10.551136] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[ 10.551233] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
[ 10.602572] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[ 10.633081] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
[ 10.648509] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[ 10.653735] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
[ 10.655626] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
[ 10.657937] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
[ 10.661203] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
[ 10.665564] nvme nvme0: using unchecked data buffer
[ 10.747943] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 10.798807] usb 1-5: New USB device found, idVendor=0c45, idProduct=670c, bcdDevice=56.26
[ 10.798812] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 10.798813] usb 1-5: Product: Integrated_Webcam_HD
[ 10.798815] usb 1-5: Manufacturer: CN09GTFMLOG008C8B7FWA01
[ 10.818047] ath: EEPROM regdomain: 0x6c
[ 10.818053] ath: EEPROM indicates we should expect a direct regpair map
[ 10.818055] ath: Country alpha2 being used: 00
[ 10.818056] ath: Regpair used: 0x6c
[ 10.829454] ath10k_pci 0000:3a:00.0 wlp58s0: renamed from wlan0
[ 10.842176] mc: Linux media interface: v0.10
[ 10.851761] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input30
[ 10.855067] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input31
[ 10.855460] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input32
[ 10.855675] hid-multitouch 0003:04F3:2234.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
[ 10.855766] usbcore: registered new interface driver usbhid
[ 10.855769] usbhid: USB HID core driver
[ 10.871727] Bluetooth: Core ver 2.22
[ 10.871749] NET: Registered PF_BLUETOOTH protocol family
[ 10.871751] Bluetooth: HCI device and connection manager initialized
[ 10.871754] Bluetooth: HCI socket layer initialized
[ 10.871756] Bluetooth: L2CAP socket layer initialized
[ 10.871760] Bluetooth: SCO socket layer initialized
[ 10.873675] videodev: Linux video capture interface: v2.00
[ 10.885894] usbcore: registered new interface driver btusb
[ 10.892134] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[ 10.892139] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[ 10.902428] usb 1-5: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c)
[ 11.033830] usbcore: registered new interface driver uvcvideo
[ 11.073732] PPP generic driver version 2.4.2
[ 11.074848] NET: Registered PF_PPPOX protocol family
[ 11.087017] l2tp_core: L2TP core driver, V2.0
[ 11.088200] l2tp_netlink: L2TP netlink interface
[ 11.089404] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 11.102761] Initializing XFRM netlink socket
[ 11.107506] IPsec XFRM device driver
[ 11.249486] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 11.271679] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 13.250538] rfkill: input handler disabled
[ 15.292786] pci 0000:01:00.0: [8086:1576] type 01 class 0x060400 PCIe Switch Upstream Port
[ 15.292818] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[ 15.292829] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 15.292841] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 15.292854] pci 0000:01:00.0: enabling Extended Tags
[ 15.293111] pci 0000:01:00.0: supports D1 D2
[ 15.293115] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 15.293197] pci 0000:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 15.293777] pci 0000:02:00.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[ 15.293810] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 15.293821] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 15.293847] pci 0000:02:00.0: enabling Extended Tags
[ 15.293964] pci 0000:02:00.0: supports D1 D2
[ 15.293966] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 15.356878] pci 0000:02:01.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[ 15.356913] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[ 15.356924] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[ 15.356936] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 15.356952] pci 0000:02:01.0: enabling Extended Tags
[ 15.357067] pci 0000:02:01.0: supports D1 D2
[ 15.357069] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 15.357414] pci 0000:02:02.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[ 15.357445] pci 0000:02:02.0: PCI bridge to [bus 39]
[ 15.357455] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[ 15.357481] pci 0000:02:02.0: enabling Extended Tags
[ 15.357584] pci 0000:02:02.0: supports D1 D2
[ 15.357586] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 15.358518] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[ 15.358610] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 15.358693] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[ 15.358827] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330 PCIe Endpoint
[ 15.358888] pci 0000:39:00.0: BAR 0 [mem 0xd9f00000-0xd9f0ffff]
[ 15.358908] pci 0000:39:00.0: enabling Extended Tags
[ 15.359041] pci 0000:39:00.0: supports D1 D2
[ 15.359042] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 15.361272] pci 0000:02:02.0: PCI bridge to [bus 39]
[ 15.361318] pci_bus 0000:02: Allocating resources
[ 15.361333] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[ 15.361336] pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 15.361339] pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 15.361342] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[ 15.361346] pci 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[ 15.361348] pci 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[ 15.361350] pci 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[ 15.361352] pci 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[ 15.361356] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 15.361358] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 15.361360] pci 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 15.361362] pci 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[ 15.361364] pci 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 15.361365] pci 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[ 15.361369] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 15.361370] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 15.361372] pci 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 15.361374] pci 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[ 15.361376] pci 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 15.361378] pci 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[ 15.361380] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 15.361386] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 15.361395] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[ 15.361400] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[ 15.361404] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 15.361411] pci 0000:02:02.0: PCI bridge to [bus 39]
[ 15.361417] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[ 15.361425] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[ 15.361431] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 15.361435] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 15.362422] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 15.362431] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[ 15.363544] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[ 15.363881] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 15.363886] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[ 15.363889] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 15.363932] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[ 15.363935] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.363937] usb usb3: Product: xHCI Host Controller
[ 15.363939] usb usb3: Manufacturer: Linux 6.14.0-rc3-00060-g6537cfb395f3 xhci-hcd
[ 15.363940] usb usb3: SerialNumber: 0000:39:00.0
[ 15.365161] hub 3-0:1.0: USB hub found
[ 15.365173] hub 3-0:1.0: 2 ports detected
[ 15.365719] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[ 15.365723] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.365725] usb usb4: Product: xHCI Host Controller
[ 15.365727] usb usb4: Manufacturer: Linux 6.14.0-rc3-00060-g6537cfb395f3 xhci-hcd
[ 15.365728] usb usb4: SerialNumber: 0000:39:00.0
[ 15.365921] hub 4-0:1.0: USB hub found
[ 15.365931] hub 4-0:1.0: 2 ports detected
[ 15.380066] pci_bus 0000:02: Allocating resources
[ 15.380087] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[ 15.380091] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 15.380094] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 15.380097] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[ 15.380102] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[ 15.380105] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[ 15.380107] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[ 15.380108] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[ 15.380113] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 15.380115] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 15.380116] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 15.380118] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[ 15.380119] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 15.380121] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[ 15.380123] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[ 15.380125] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[ 15.380127] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 15.380128] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[ 15.380130] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 15.380131] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[ 15.613956] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 15.756098] usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3
[ 15.756104] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 15.756106] usb 3-1: Product: USB2.0 Hub
[ 15.756108] usb 3-1: Manufacturer: VIA Labs, Inc.
[ 15.756109] usb 3-1: SerialNumber: 000000000
[ 15.757188] hub 3-1:1.0: USB hub found
[ 15.757399] hub 3-1:1.0: 5 ports detected
[ 15.882760] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 15.926526] usb 4-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[ 15.926532] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 15.926535] usb 4-1: Product: USB3.0 Hub
[ 15.926536] usb 4-1: Manufacturer: VIA Labs, Inc.
[ 15.926538] usb 4-1: SerialNumber: 000000000
[ 15.928342] hub 4-1:1.0: USB hub found
[ 15.928543] hub 4-1:1.0: 4 ports detected
[ 16.485958] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd
[ 16.628357] usb 3-1.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4
[ 16.628362] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 16.628364] usb 3-1.1: Product: USB2.0 Hub
[ 16.628365] usb 3-1.1: Manufacturer: VIA Labs, Inc.
[ 16.628366] usb 3-1.1: SerialNumber: 000000000
[ 16.629353] hub 3-1.1:1.0: USB hub found
[ 16.633946] hub 3-1.1:1.0: 4 ports detected
[ 16.727047] usb 4-1.1: new SuperSpeed USB device number 3 using xhci_hcd
[ 16.787863] usb 4-1.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[ 16.787880] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 16.787886] usb 4-1.1: Product: USB3.0 Hub
[ 16.787891] usb 4-1.1: Manufacturer: VIA Labs, Inc.
[ 16.787895] usb 4-1.1: SerialNumber: 000000000
[ 16.790771] hub 4-1.1:1.0: USB hub found
[ 16.791057] hub 4-1.1:1.0: 4 ports detected
[ 16.858378] usb 3-1.5: new high-speed USB device number 4 using xhci_hcd
[ 16.947464] usb 3-1.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[ 16.947480] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 16.947486] usb 3-1.5: Product: USB Billboard Device
[ 16.947491] usb 3-1.5: Manufacturer: VIA Labs, Inc.
[ 16.947496] usb 3-1.5: SerialNumber: 0000000000000001
[ 17.018157] usb 4-1.4: new SuperSpeed USB device number 4 using xhci_hcd
[ 17.036619] usb 4-1.4: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00
[ 17.036635] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 17.036641] usb 4-1.4: Product: Mass Storage Device
[ 17.036646] usb 4-1.4: Manufacturer: Generic
[ 17.036650] usb 4-1.4: SerialNumber: 058F84688461
[ 17.074995] SCSI subsystem initialized
[ 17.078607] usb-storage 4-1.4:1.0: USB Mass Storage device detected
[ 17.078839] scsi host0: usb-storage 4-1.4:1.0
[ 17.079017] usbcore: registered new interface driver usb-storage
[ 17.302781] usb 3-1.1.3: new high-speed USB device number 5 using xhci_hcd
[ 18.042358] usb 4-1.1.3: new SuperSpeed USB device number 5 using xhci_hcd
[ 18.060031] usb 4-1.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[ 18.060050] usb 4-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 18.060057] usb 4-1.1.3: Product: USB 10/100/1000 LAN
[ 18.060063] usb 4-1.1.3: Manufacturer: Realtek
[ 18.060068] usb 4-1.1.3: SerialNumber: 000001
[ 18.087586] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6
[ 18.092035] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6
[ 18.098212] usbcore: registered new device driver r8152-cfgselector
[ 18.099413] sd 0:0:0:0: [sda] Media removed, stopped polling
[ 18.100059] sd 0:0:0:1: [sdb] Media removed, stopped polling
[ 18.100134] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 18.100573] sd 0:0:0:1: [sdb] Attached SCSI removable disk
[ 18.178827] r8152-cfgselector 4-1.1.3: reset SuperSpeed USB device number 5 using xhci_hcd
[ 18.242388] r8152 4-1.1.3:1.0 eth0: v1.12.13
[ 18.242546] usbcore: registered new interface driver r8152
[ 18.259058] usbcore: registered new interface driver cdc_ether
[ 18.261267] usbcore: registered new interface driver r8153_ecm
[ 18.373351] r8152 4-1.1.3:1.0 enx00e04ceb9e75: renamed from eth0
[ 21.525418] r8152 4-1.1.3:1.0 enx00e04ceb9e75: carrier on
[ 22.387222] rfkill: input handler enabled
[ 24.494629] rfkill: input handler disabled
[ 919.939920] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=19 end=20) time 194 us, min 1788, max 1799, scanline start 1779, end 1800
[ 1033.091036] NOHZ tick-stop error: local softirq work is pending, handler #08!!!
[ 1045.085302] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=13 end=14) time 160 us, min 1788, max 1799, scanline start 1787, end 1805
[ 1047.978236] NOHZ tick-stop error: local softirq work is pending, handler #08!!!
[ 1167.537309] NOHZ tick-stop error: local softirq work is pending, handler #08!!!
[ 1286.854143] NOHZ tick-stop error: local softirq work is pending, handler #08!!!
[ 1355.994411] NOHZ tick-stop error: local softirq work is pending, handler #08!!!
[ 1460.005183] NOHZ tick-stop error: local softirq work is pending, handler #08!!!
[ 1688.084035] NOHZ tick-stop error: local softirq work is pending, handler #08!!!
[ 2108.578715] NOHZ tick-stop error: local softirq work is pending, handler #08!!!
[ 2174.019152] NOHZ tick-stop error: local softirq work is pending, handler #08!!!
[ 2699.989309] NOHZ tick-stop error: local softirq work is pending, handler #08!!!
[11374.482456] r8152 4-1.1.3:1.0 enx00e04ceb9e75: linking down
[11378.278922] xhci_hcd 0000:39:00.0: xHCI host controller not responding, assume dead
[11378.278983] xhci_hcd 0000:39:00.0: HC died; cleaning up
[11378.279950] hub 3-0:1.0: activate --> -19
[11378.284546] usb 4-1: USB disconnect, device number 2
[11378.284579] usb 4-1.1: USB disconnect, device number 3
[11378.284591] r8152-cfgselector 4-1.1.3: USB disconnect, device number 5
[11378.285394] usb 3-1: USB disconnect, device number 2
[11378.285409] usb 3-1.1: USB disconnect, device number 3
[11378.302015] usb 3-1.5: USB disconnect, device number 4
[11378.314376] xhci_hcd 0000:39:00.0: remove, state 1
[11378.314414] usb usb4: USB disconnect, device number 1
[11378.378009] usb 4-1.4: USB disconnect, device number 4
[11378.638479] xhci_hcd 0000:39:00.0: USB bus 4 deregistered
[11378.638539] xhci_hcd 0000:39:00.0: remove, state 1
[11378.638569] usb usb3: USB disconnect, device number 1
[11378.642220] xhci_hcd 0000:39:00.0: Host halt failed, -19
[11378.642255] xhci_hcd 0000:39:00.0: Host not accessible, reset failed.
[11378.643132] xhci_hcd 0000:39:00.0: USB bus 3 deregistered
[11378.691274] pci_bus 0000:02: Allocating resources
[11378.691332] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[11378.691372] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[11378.691405] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[11378.691427] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[11378.691463] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[11378.691491] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[11378.691504] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[11378.691529] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[11378.691557] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[11378.691584] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[11378.691597] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[11378.691623] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[11378.691635] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[11378.691659] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[11378.691676] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[11378.691703] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[11378.691714] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[11378.691725] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[11378.691751] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[11378.691762] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[11383.363469] pcieport 0000:02:00.0: Unable to change power state from D3hot to D0, device inaccessible
[11383.367111] pci_bus 0000:03: busn_res: [bus 03] is released
[11383.370042] pci_bus 0000:04: busn_res: [bus 04-38] is released
[11383.372265] pci_bus 0000:39: busn_res: [bus 39] is released
[11383.373727] pci_bus 0000:02: busn_res: [bus 02-39] is released
[11517.862619] PM: suspend entry (deep)
[11517.883503] Filesystems sync: 0.020 seconds
[11517.897663] Freezing user space processes
[11517.900123] Freezing user space processes completed (elapsed 0.002 seconds)
[11517.900135] OOM killer disabled.
[11517.900138] Freezing remaining freezable tasks
[11517.901860] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[11517.901973] printk: Suspending console(s) (use no_console_suspend to debug)
[11518.478216] ACPI: EC: interrupt blocked
[11518.505174] ACPI: PM: Preparing to enter system sleep state S3
[11518.515118] ACPI: EC: event blocked
[11518.515122] ACPI: EC: EC stopped
[11518.515124] ACPI: PM: Saving platform NVS memory
[11518.518194] Disabling non-boot CPUs ...
[11518.520145] smpboot: CPU 3 is now offline
[11518.524459] smpboot: CPU 2 is now offline
[11518.528395] smpboot: CPU 1 is now offline
[11518.536307] ACPI: PM: Low-level resume complete
[11518.536350] ACPI: EC: EC started
[11518.536350] ACPI: PM: Restoring platform NVS memory
[11518.538220] Enabling non-boot CPUs ...
[11518.538244] smpboot: Booting Node 0 Processor 1 APIC 0x2
[11518.538932] CPU1 is up
[11518.538947] smpboot: Booting Node 0 Processor 2 APIC 0x1
[11518.539656] CPU2 is up
[11518.539672] smpboot: Booting Node 0 Processor 3 APIC 0x3
[11518.540340] CPU3 is up
[11518.543156] ACPI: PM: Waking up from system sleep state S3
[11518.573073] ACPI: EC: interrupt unblocked
[11518.590248] ACPI: EC: event unblocked
[11518.593105] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[11518.593130] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[11518.603283] nvme nvme0: 4/0/0 default/read/poll queues
[11518.618476] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[11518.618482] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[11518.618484] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[11518.827955] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[11518.840119] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[11519.096156] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[11519.352234] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[11519.492731] OOM killer enabled.
[11519.492733] Restarting tasks ... done.
[11519.494361] random: crng reseeded on system resumption
[11519.584409] PM: suspend exit
[11519.694570] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[11519.694582] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[11519.854479] warning: `atop' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[11520.040429] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[11520.051035] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[11520.077790] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[11573.302369] PM: suspend entry (deep)
[11573.313836] Filesystems sync: 0.011 seconds
[11573.325298] Freezing user space processes
[11573.327742] Freezing user space processes completed (elapsed 0.002 seconds)
[11573.327754] OOM killer disabled.
[11573.327757] Freezing remaining freezable tasks
[11573.329563] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[11573.329682] printk: Suspending console(s) (use no_console_suspend to debug)
[11573.916594] ACPI: EC: interrupt blocked
[11573.943616] ACPI: PM: Preparing to enter system sleep state S3
[11573.954641] ACPI: EC: event blocked
[11573.954645] ACPI: EC: EC stopped
[11573.954647] ACPI: PM: Saving platform NVS memory
[11573.957916] Disabling non-boot CPUs ...
[11573.959844] smpboot: CPU 3 is now offline
[11573.963967] smpboot: CPU 2 is now offline
[11573.967966] smpboot: CPU 1 is now offline
[11573.973794] ACPI: PM: Low-level resume complete
[11573.973839] ACPI: EC: EC started
[11573.973840] ACPI: PM: Restoring platform NVS memory
[11573.975724] Enabling non-boot CPUs ...
[11573.975753] smpboot: Booting Node 0 Processor 1 APIC 0x2
[11573.976461] CPU1 is up
[11573.976476] smpboot: Booting Node 0 Processor 2 APIC 0x1
[11573.977210] CPU2 is up
[11573.977225] smpboot: Booting Node 0 Processor 3 APIC 0x3
[11573.977907] CPU3 is up
[11573.980739] ACPI: PM: Waking up from system sleep state S3
[11574.013202] ACPI: EC: interrupt unblocked
[11574.030192] ACPI: EC: event unblocked
[11574.032964] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[11574.032973] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[11574.043308] nvme nvme0: 4/0/0 default/read/poll queues
[11574.060251] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[11574.060254] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[11574.060256] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[11574.269642] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[11574.281966] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[11574.537840] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[11574.793975] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[11574.933685] OOM killer enabled.
[11574.933689] Restarting tasks ... done.
[11574.934816] random: crng reseeded on system resumption
[11575.029927] PM: suspend exit
[11575.141568] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[11575.141582] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[11575.485705] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[11575.505921] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[11575.531560] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[11583.361733] PM: suspend entry (deep)
[11583.371309] Filesystems sync: 0.009 seconds
[11583.371913] Freezing user space processes
[11583.373530] Freezing user space processes completed (elapsed 0.001 seconds)
[11583.373534] OOM killer disabled.
[11583.373535] Freezing remaining freezable tasks
[11583.467363] Freezing remaining freezable tasks completed (elapsed 0.093 seconds)
[11583.467500] printk: Suspending console(s) (use no_console_suspend to debug)
[11584.028762] ACPI: EC: interrupt blocked
[11584.070828] ACPI: PM: Preparing to enter system sleep state S3
[11584.081930] ACPI: EC: event blocked
[11584.081935] ACPI: EC: EC stopped
[11584.081937] ACPI: PM: Saving platform NVS memory
[11584.085534] Disabling non-boot CPUs ...
[11584.089125] smpboot: CPU 3 is now offline
[11584.092221] smpboot: CPU 2 is now offline
[11584.096858] smpboot: CPU 1 is now offline
[11584.104412] ACPI: PM: Low-level resume complete
[11584.104455] ACPI: EC: EC started
[11584.104456] ACPI: PM: Restoring platform NVS memory
[11584.106291] Enabling non-boot CPUs ...
[11584.106316] smpboot: Booting Node 0 Processor 1 APIC 0x2
[11584.107341] CPU1 is up
[11584.107358] smpboot: Booting Node 0 Processor 2 APIC 0x1
[11584.108088] CPU2 is up
[11584.108105] smpboot: Booting Node 0 Processor 3 APIC 0x3
[11584.108787] CPU3 is up
[11584.111623] ACPI: PM: Waking up from system sleep state S3
[11584.140884] ACPI: EC: interrupt unblocked
[11584.170759] ACPI: EC: event unblocked
[11584.173762] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[11584.173773] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[11584.183213] nvme nvme0: 4/0/0 default/read/poll queues
[11584.200383] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[11584.200389] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[11584.200392] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[11584.417832] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[11584.421993] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[11584.581748] atkbd_receive_byte: 17 callbacks suppressed
[11584.581753] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[11584.677994] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[11584.934129] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[11585.074324] OOM killer enabled.
[11585.074328] Restarting tasks ... done.
[11585.075485] random: crng reseeded on system resumption
[11585.172599] PM: suspend exit
[11585.277964] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[11585.277975] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[11585.613935] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[11585.636137] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[11585.661071] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[11619.727377] pci 0000:01:00.0: [8086:1576] type 01 class 0x060400 PCIe Switch Upstream Port
[11619.727501] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[11619.727543] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[11619.727591] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[11619.727642] pci 0000:01:00.0: enabling Extended Tags
[11619.728019] pci 0000:01:00.0: supports D1 D2
[11619.728024] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[11619.728217] pci 0000:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[11619.755157] pci 0000:02:00.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[11619.755269] pci 0000:02:00.0: PCI bridge to [bus 03]
[11619.755305] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[11619.755399] pci 0000:02:00.0: enabling Extended Tags
[11619.755720] pci 0000:02:00.0: supports D1 D2
[11619.755740] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[11619.757346] pci 0000:02:01.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[11619.757433] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[11619.757511] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[11619.757551] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[11619.757595] pci 0000:02:01.0: enabling Extended Tags
[11619.759705] pci 0000:02:01.0: supports D1 D2
[11619.759727] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[11619.769385] pci 0000:02:02.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[11619.769536] pci 0000:02:02.0: PCI bridge to [bus 39]
[11619.769560] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[11619.769635] pci 0000:02:02.0: enabling Extended Tags
[11619.778988] pci 0000:02:02.0: supports D1 D2
[11619.779016] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[11619.780011] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[11619.780350] pci 0000:02:00.0: PCI bridge to [bus 03]
[11619.781489] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[11619.782825] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330 PCIe Endpoint
[11619.782968] pci 0000:39:00.0: BAR 0 [mem 0xd9f00000-0xd9f0ffff]
[11619.783020] pci 0000:39:00.0: enabling Extended Tags
[11619.783319] pci 0000:39:00.0: supports D1 D2
[11619.783341] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[11619.786588] pci 0000:02:02.0: PCI bridge to [bus 39]
[11619.786714] pci_bus 0000:02: Allocating resources
[11619.786778] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[11619.786792] pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[11619.786816] pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[11619.786830] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[11619.786858] pci 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[11619.786867] pci 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[11619.786875] pci 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[11619.786881] pci 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[11619.786912] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[11619.786920] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[11619.786927] pci 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[11619.786947] pci 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[11619.786953] pci 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[11619.786959] pci 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[11619.786970] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[11619.786990] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[11619.786998] pci 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[11619.787005] pci 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[11619.787012] pci 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[11619.787032] pci 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[11619.787041] pci 0000:02:00.0: PCI bridge to [bus 03]
[11619.787055] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[11619.787089] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[11619.787114] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[11619.787125] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[11619.787155] pci 0000:02:02.0: PCI bridge to [bus 39]
[11619.787168] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[11619.787200] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[11619.787212] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[11619.787223] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[11619.803815] xhci_hcd 0000:39:00.0: xHCI Host Controller
[11619.803858] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[11619.805181] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[11619.862318] xhci_hcd 0000:39:00.0: xHCI Host Controller
[11619.862352] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[11619.862369] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[11619.862628] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[11619.862654] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[11619.862662] usb usb3: Product: xHCI Host Controller
[11619.862669] usb usb3: Manufacturer: Linux 6.14.0-rc3-00060-g6537cfb395f3 xhci-hcd
[11619.862676] usb usb3: SerialNumber: 0000:39:00.0
[11619.863483] hub 3-0:1.0: USB hub found
[11619.863550] hub 3-0:1.0: 2 ports detected
[11619.866184] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[11619.866212] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[11619.866220] usb usb4: Product: xHCI Host Controller
[11619.866227] usb usb4: Manufacturer: Linux 6.14.0-rc3-00060-g6537cfb395f3 xhci-hcd
[11619.866233] usb usb4: SerialNumber: 0000:39:00.0
[11619.921112] hub 4-0:1.0: USB hub found
[11619.921169] hub 4-0:1.0: 2 ports detected
[11619.960830] pci_bus 0000:02: Allocating resources
[11619.960881] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[11619.960912] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[11619.960924] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[11619.960954] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[11619.960969] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[11619.960977] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[11619.960999] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[11619.961005] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[11619.961035] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[11619.961041] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[11619.961048] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[11619.961055] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[11619.961063] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[11619.961084] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[11619.961096] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[11619.961103] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[11619.961126] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[11619.961133] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[11619.961141] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[11619.961162] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[11620.141518] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[11620.280463] usb 3-1: New USB device found, idVendor=2109, idProduct=2820, bcdDevice=30.03
[11620.280478] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[11620.280483] usb 3-1: Product: USB2.0 Hub
[11620.280488] usb 3-1: Manufacturer: VIA Labs, Inc.
[11620.284429] hub 3-1:1.0: USB hub found
[11620.284573] hub 3-1:1.0: 5 ports detected
[11620.409252] usb 4-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
[11620.425980] usb 4-1: New USB device found, idVendor=2109, idProduct=0820, bcdDevice=30.03
[11620.426015] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[11620.426025] usb 4-1: Product: USB3.1 Hub
[11620.426032] usb 4-1: Manufacturer: VIA Labs, Inc.
[11620.430612] hub 4-1:1.0: USB hub found
[11620.430916] hub 4-1:1.0: 4 ports detected
[11621.017561] usb 3-1.1: new full-speed USB device number 3 using xhci_hcd
[11621.165121] usb 3-1.1: New USB device found, idVendor=06c4, idProduct=c412, bcdDevice= 0.06
[11621.165138] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[11621.165154] usb 3-1.1: Product: DELL DA300
[11621.165159] usb 3-1.1: Manufacturer: Bizlink
[11621.165164] usb 3-1.1: SerialNumber: MCU Ver0006
[11621.184526] hid-generic 0003:06C4:C412.0003: hiddev1,hidraw2: USB HID v1.11 Device [Bizlink DELL DA300] on usb-0000:39:00.0-1.1/input0
[11621.231785] usb 4-1.2: new SuperSpeed USB device number 3 using xhci_hcd
[11621.250106] usb 4-1.2: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00
[11621.250145] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[11621.250172] usb 4-1.2: Product: USB 10/100/1000 LAN
[11621.250187] usb 4-1.2: Manufacturer: Realtek
[11621.250194] usb 4-1.2: SerialNumber: 001000001
[11621.338069] r8152-cfgselector 4-1.2: reset SuperSpeed USB device number 3 using xhci_hcd
[11621.376251] r8152 4-1.2:1.0 (unnamed net_device) (uninitialized): Using pass-thru MAC addr 18:db:f2:2d:cc:f3
[11621.382176] r8152 4-1.2:1.0 eth0: v1.12.13
[11621.668325] r8152 4-1.2:1.0 enp57s0u1u2: renamed from eth0
[11624.858055] r8152 4-1.2:1.0 enp57s0u1u2: carrier on
[11683.801131] usb 1-1: new low-speed USB device number 5 using xhci_hcd
[11683.945571] usb 1-1: New USB device found, idVendor=0bf8, idProduct=101e, bcdDevice= 1.09
[11683.945596] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[11683.945606] usb 1-1: Product: Fujitsu Keyboard
[11683.945614] usb 1-1: Manufacturer: Fujitsu
[11683.959236] input: Fujitsu Fujitsu Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:0BF8:101E.0004/input/input37
[11684.085991] hid-generic 0003:0BF8:101E.0004: input,hidraw3: USB HID v1.10 Keyboard [Fujitsu Fujitsu Keyboard] on usb-0000:00:14.0-1/input0
[11684.096452] input: Fujitsu Fujitsu Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:0BF8:101E.0005/input/input38
[11684.150328] input: Fujitsu Fujitsu Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:0BF8:101E.0005/input/input39
[11684.151343] hid-generic 0003:0BF8:101E.0005: input,hiddev2,hidraw4: USB HID v1.10 Device [Fujitsu Fujitsu Keyboard] on usb-0000:00:14.0-1/input1
[11686.480904] usb 1-2: new low-speed USB device number 6 using xhci_hcd
[11686.625717] usb 1-2: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
[11686.625742] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[11686.625751] usb 1-2: Product: USB Optical Mouse
[11686.625759] usb 1-2: Manufacturer: Logitech
[11686.632294] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C077.0006/input/input40
[11686.632899] hid-generic 0003:046D:C077.0006: input,hidraw5: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-2/input0
[12186.976621] usb 4-1.3: new SuperSpeed USB device number 4 using xhci_hcd
[12186.993400] usb 4-1.3: New USB device found, idVendor=0781, idProduct=5580, bcdDevice= 0.10
[12186.993424] usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12186.993435] usb 4-1.3: Product: Extreme
[12186.993443] usb 4-1.3: Manufacturer: SanDisk
[12186.993450] usb 4-1.3: SerialNumber: AA010316151450491977
[12186.996306] usb-storage 4-1.3:1.0: USB Mass Storage device detected
[12186.996900] scsi host0: usb-storage 4-1.3:1.0
[12188.017481] scsi 0:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6
[12188.025693] sd 0:0:0:0: [sda] 122544516 512-byte logical blocks: (62.7 GB/58.4 GiB)
[12188.026083] sd 0:0:0:0: [sda] Write Protect is off
[12188.026100] sd 0:0:0:0: [sda] Mode Sense: 53 00 00 08
[12188.026462] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[12188.061527] sda: sda1
[12188.062021] sd 0:0:0:0: [sda] Attached SCSI removable disk
[12213.913546] EXT4-fs (sda1): mounted filesystem 031e1c8a-d3d4-457e-a358-6e48111602cb r/w with ordered data mode. Quota mode: none.
[12219.094897] EXT4-fs (sda1): unmounting filesystem 031e1c8a-d3d4-457e-a358-6e48111602cb.
[12222.213578] usb 4-1.3: USB disconnect, device number 4
[12395.752984] usb 1-1: USB disconnect, device number 5
[12448.522165] usb 3-1.3: new low-speed USB device number 4 using xhci_hcd
[12448.671223] usb 3-1.3: New USB device found, idVendor=0bf8, idProduct=101e, bcdDevice= 1.09
[12448.671249] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[12448.671259] usb 3-1.3: Product: Fujitsu Keyboard
[12448.671267] usb 3-1.3: Manufacturer: Fujitsu
[12448.681829] input: Fujitsu Fujitsu Keyboard as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:0BF8:101E.0007/input/input41
[12448.806991] hid-generic 0003:0BF8:101E.0007: input,hidraw3: USB HID v1.10 Keyboard [Fujitsu Fujitsu Keyboard] on usb-0000:39:00.0-1.3/input0
[12448.815336] input: Fujitsu Fujitsu Keyboard System Control as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.3/3-1.3:1.1/0003:0BF8:101E.0008/input/input42
[12448.870879] input: Fujitsu Fujitsu Keyboard Consumer Control as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.3/3-1.3:1.1/0003:0BF8:101E.0008/input/input43
[12448.871832] hid-generic 0003:0BF8:101E.0008: input,hiddev2,hidraw4: USB HID v1.10 Device [Fujitsu Fujitsu Keyboard] on usb-0000:39:00.0-1.3/input1
[12477.845957] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[12477.862587] usb 2-1: New USB device found, idVendor=0781, idProduct=5580, bcdDevice= 0.10
[12477.862620] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12477.862636] usb 2-1: Product: Extreme
[12477.862648] usb 2-1: Manufacturer: SanDisk
[12477.862660] usb 2-1: SerialNumber: AA010107160853220053
[12477.866731] usb-storage 2-1:1.0: USB Mass Storage device detected
[12477.871452] scsi host0: usb-storage 2-1:1.0
[12478.895300] scsi 0:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6
[12478.904912] sd 0:0:0:0: [sda] 61282631 512-byte logical blocks: (31.4 GB/29.2 GiB)
[12478.906463] sd 0:0:0:0: [sda] Write Protect is off
[12478.906482] sd 0:0:0:0: [sda] Mode Sense: 53 00 00 08
[12478.906882] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[12478.946770] sda: sda1 sda2 sda3 sda4
[12478.947757] sd 0:0:0:0: [sda] Attached SCSI removable disk
[12489.734032] mmap: qtdemux0:sink (16700): VmData 634834944 exceed data ulimit 556684212. Update limits or use boot option ignore_rlimit_data.
[12489.915126] traps: multiqueue0:src[16703] trap int3 ip:7f4c9ae68537 sp:7f4c9551f790 error:0 in libglib-2.0.so.0.8303.0[65537,7f4c9ae21000+a1000]
[12497.931044] EXT4-fs (sda4): recovery complete
[12497.931203] EXT4-fs (sda4): mounted filesystem 1e7f059b-8cc6-4b3e-8b5b-901c08c0fa81 r/w with ordered data mode. Quota mode: none.
[12515.027471] EXT4-fs (sda4): unmounting filesystem 1e7f059b-8cc6-4b3e-8b5b-901c08c0fa81.
[12521.913430] usb 2-1: USB disconnect, device number 2
[12754.059482] usb 2-1: new SuperSpeed USB device number 3 using xhci_hcd
[12754.080179] usb 2-1: New USB device found, idVendor=0781, idProduct=5580, bcdDevice= 0.10
[12754.080203] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12754.080213] usb 2-1: Product: Extreme
[12754.080221] usb 2-1: Manufacturer: SanDisk
[12754.080227] usb 2-1: SerialNumber: AA010107160853220053
[12754.083202] usb-storage 2-1:1.0: USB Mass Storage device detected
[12754.083861] scsi host0: usb-storage 2-1:1.0
[12755.116997] scsi 0:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6
[12755.128708] sd 0:0:0:0: [sda] 61282631 512-byte logical blocks: (31.4 GB/29.2 GiB)
[12755.129130] sd 0:0:0:0: [sda] Write Protect is off
[12755.129150] sd 0:0:0:0: [sda] Mode Sense: 53 00 00 08
[12755.129549] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[12755.173981] sda: sda1 sda2 sda3 sda4
[12755.174753] sd 0:0:0:0: [sda] Attached SCSI removable disk
[12833.508605] sda: sda1 sda2
[12839.954571] usb 2-1: USB disconnect, device number 3
[14356.149470] usb 2-1: new SuperSpeed USB device number 4 using xhci_hcd
[14356.166259] usb 2-1: New USB device found, idVendor=0781, idProduct=5580, bcdDevice= 0.10
[14356.166284] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[14356.166295] usb 2-1: Product: Extreme
[14356.166303] usb 2-1: Manufacturer: SanDisk
[14356.166310] usb 2-1: SerialNumber: AA010107160853220053
[14356.169030] usb-storage 2-1:1.0: USB Mass Storage device detected
[14356.169674] scsi host0: usb-storage 2-1:1.0
[14357.186104] scsi 0:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6
[14357.195010] sd 0:0:0:0: [sda] 61282631 512-byte logical blocks: (31.4 GB/29.2 GiB)
[14357.195407] sd 0:0:0:0: [sda] Write Protect is off
[14357.195427] sd 0:0:0:0: [sda] Mode Sense: 53 00 00 08
[14357.195825] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[14357.226455] sda: sda1 sda2
[14357.227159] sd 0:0:0:0: [sda] Attached SCSI removable disk
[14469.890931] sda: sda1
[14469.937585] sda: sda1
[14487.596204] usb 2-1: USB disconnect, device number 4
[14491.600295] usb 2-1: new SuperSpeed USB device number 5 using xhci_hcd
[14491.617048] usb 2-1: New USB device found, idVendor=0781, idProduct=5580, bcdDevice= 0.10
[14491.617074] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[14491.617084] usb 2-1: Product: Extreme
[14491.617092] usb 2-1: Manufacturer: SanDisk
[14491.617098] usb 2-1: SerialNumber: AA010107160853220053
[14491.620331] usb-storage 2-1:1.0: USB Mass Storage device detected
[14491.620885] scsi host0: usb-storage 2-1:1.0
[14492.636946] scsi 0:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6
[14492.643916] sd 0:0:0:0: [sda] 61282631 512-byte logical blocks: (31.4 GB/29.2 GiB)
[14492.644353] sd 0:0:0:0: [sda] Write Protect is off
[14492.644373] sd 0:0:0:0: [sda] Mode Sense: 53 00 00 08
[14492.644720] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[14492.669442] sda: sda1
[14492.669883] sd 0:0:0:0: [sda] Attached SCSI removable disk
[14520.104044] usb 2-1: USB disconnect, device number 5
[20366.542986] SshMasterConnec[22535]: segfault at 7f0b68c896ef ip 00007f0cca3ae050 sp 00007f0ca1b9b7b0 error 4 in libssh.so.4.10.1[20050,7f0cca39d000+4c000] likely on CPU 1 (core 1, socket 0)
[20366.543003] Code: 00 49 8d 5e 08 48 f7 e9 48 c1 f9 3f 48 c1 fa 07 48 29 ca 8d 04 16 89 44 24 20 49 8b 06 48 85 c0 74 20 0f 1f 84 00 00 00 00 00 <48> 8b 30 4c 89 ef 48 83 c3 08 e8 a1 f7 fe ff 48 8b 43 f8 48 85 c0
[22605.559964] usb 3-1.3: USB disconnect, device number 4
[22611.101528] usb 1-1: new low-speed USB device number 7 using xhci_hcd
[22611.245214] usb 1-1: New USB device found, idVendor=0bf8, idProduct=101e, bcdDevice= 1.09
[22611.245221] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[22611.245224] usb 1-1: Product: Fujitsu Keyboard
[22611.245226] usb 1-1: Manufacturer: Fujitsu
[22611.250585] input: Fujitsu Fujitsu Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:0BF8:101E.0009/input/input44
[22611.353742] hid-generic 0003:0BF8:101E.0009: input,hidraw3: USB HID v1.10 Keyboard [Fujitsu Fujitsu Keyboard] on usb-0000:00:14.0-1/input0
[22611.360871] input: Fujitsu Fujitsu Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:0BF8:101E.000A/input/input45
[22611.413780] input: Fujitsu Fujitsu Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:0BF8:101E.000A/input/input46
[22611.414009] hid-generic 0003:0BF8:101E.000A: input,hiddev2,hidraw4: USB HID v1.10 Device [Fujitsu Fujitsu Keyboard] on usb-0000:00:14.0-1/input1
[25873.893029] usb 3-1.3: new full-speed USB device number 5 using xhci_hcd
[25874.050365] usb 3-1.3: New USB device found, idVendor=046d, idProduct=0a4d, bcdDevice= 1.19
[25874.050391] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[25874.050401] usb 3-1.3: Product: Logitech G430 Gaming Headset
[25874.050409] usb 3-1.3: Manufacturer: Logitech
[25874.057440] input: Logitech Logitech G430 Gaming Headset as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.3/3-1.3:1.3/0003:046D:0A4D.000B/input/input47
[25874.114071] hid-generic 0003:046D:0A4D.000B: input,hidraw6: USB HID v1.00 Device [Logitech Logitech G430 Gaming Headset] on usb-0000:39:00.0-1.3/input3
[25874.385698] usbcore: registered new interface driver snd-usb-audio
[30591.582919] PM: suspend entry (deep)
[30591.593025] Filesystems sync: 0.010 seconds
[30591.596206] Freezing user space processes
[30591.598008] Freezing user space processes completed (elapsed 0.001 seconds)
[30591.598019] OOM killer disabled.
[30591.598021] Freezing remaining freezable tasks
[30591.599339] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[30591.599451] printk: Suspending console(s) (use no_console_suspend to debug)
[30592.326168] ACPI: EC: interrupt blocked
[30592.352418] ACPI: PM: Preparing to enter system sleep state S3
[30592.359050] ACPI: EC: event blocked
[30592.359053] ACPI: EC: EC stopped
[30592.359055] ACPI: PM: Saving platform NVS memory
[30592.361551] Disabling non-boot CPUs ...
[30592.363303] smpboot: CPU 3 is now offline
[30592.368681] smpboot: CPU 2 is now offline
[30592.373316] smpboot: CPU 1 is now offline
[30592.379620] ACPI: PM: Low-level resume complete
[30592.379665] ACPI: EC: EC started
[30592.379666] ACPI: PM: Restoring platform NVS memory
[30592.381574] Enabling non-boot CPUs ...
[30592.381602] smpboot: Booting Node 0 Processor 1 APIC 0x2
[30592.382301] CPU1 is up
[30592.382317] smpboot: Booting Node 0 Processor 2 APIC 0x1
[30592.383057] CPU2 is up
[30592.383073] smpboot: Booting Node 0 Processor 3 APIC 0x3
[30592.383737] CPU3 is up
[30592.386589] ACPI: PM: Waking up from system sleep state S3
[30592.694812] ACPI: EC: interrupt unblocked
[30592.697933] pcieport 0000:01:00.0: Unable to change power state from unknown to D0, device inaccessible
[30592.701776] pcieport 0000:02:01.0: Unable to change power state from unknown to D0, device inaccessible
[30592.702594] pcieport 0000:02:00.0: Unable to change power state from D3hot to D0, device inaccessible
[30592.702600] pcieport 0000:02:02.0: Unable to change power state from unknown to D0, device inaccessible
[30592.706539] xhci_hcd 0000:39:00.0: Unable to change power state from D3hot to D0, device inaccessible
[30592.769568] ACPI: EC: event unblocked
[30592.770838] xhci_hcd 0000:39:00.0: Unable to change power state from D3cold to D0, device inaccessible
[30592.770878] xhci_hcd 0000:39:00.0: Controller not ready at resume -19
[30592.770881] xhci_hcd 0000:39:00.0: PCI post-resume error -19!
[30592.770883] xhci_hcd 0000:39:00.0: HC died; cleaning up
[30592.770896] xhci_hcd 0000:39:00.0: PM: dpm_run_callback(): pci_pm_resume returns -19
[30592.770904] xhci_hcd 0000:39:00.0: PM: failed to resume async: error -19
[30592.771340] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[30592.771344] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[30592.780591] nvme nvme0: 4/0/0 default/read/poll queues
[30592.795707] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[30592.795710] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[30592.795712] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[30593.017429] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[30593.273391] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[30593.533427] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[30595.340899] OOM killer enabled.
[30595.340900] Restarting tasks ...
[30595.341074] usb 3-1: USB disconnect, device number 2
[30595.341079] usb 3-1.1: USB disconnect, device number 3
[30595.341341] usb 4-1: USB disconnect, device number 2
[30595.341345] r8152-cfgselector 4-1.2: USB disconnect, device number 3
[30595.341969] usb 1-1: USB disconnect, device number 7
[30595.342936] done.
[30595.342943] random: crng reseeded on system resumption
[30595.408374] PM: suspend exit
[30595.546620] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[30595.558967] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[30595.558972] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[30595.604757] usb 1-2: USB disconnect, device number 6
[30595.914846] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[30595.938899] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[30599.294411] pci_bus 0000:02: Allocating resources
[30599.294432] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[30599.294438] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[30599.294442] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[30599.294447] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[30599.294452] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30599.294455] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30599.294458] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30599.294461] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30599.294467] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30599.294469] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30599.294472] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30599.294475] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30599.294477] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30599.294479] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30599.294483] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30599.294486] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30599.294488] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30599.294490] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30599.294493] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30599.294495] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30599.294723] pci_bus 0000:02: Allocating resources
[30599.294737] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[30599.294741] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[30599.294745] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[30599.294749] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[30599.294753] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30599.294756] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30599.294758] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30599.294761] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30599.294765] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30599.294767] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30599.294770] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30599.294772] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30599.294774] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30599.294776] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30599.294780] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30599.294782] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30599.294785] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30599.294787] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30599.294789] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30599.294791] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30599.295021] pci_bus 0000:02: Allocating resources
[30599.295035] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[30599.295039] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[30599.295043] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[30599.295047] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[30599.295051] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30599.295054] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30599.295057] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30599.295059] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30599.295064] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30599.295067] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30599.295069] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30599.295072] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30599.295074] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30599.295077] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30599.295080] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30599.295083] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30599.295085] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30599.295088] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30599.295090] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30599.295092] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30619.945877] xhci_hcd 0000:39:00.0: remove, state 4
[30619.945888] usb usb4: USB disconnect, device number 1
[30620.981291] xhci_hcd 0000:39:00.0: xHCI host controller not responding, assume dead
[30620.981451] xhci_hcd 0000:39:00.0: Timeout while waiting for configure endpoint command
[30620.982941] usb 3-1.3: USB disconnect, device number 5
[30621.002472] xhci_hcd 0000:39:00.0: USB bus 4 deregistered
[30621.002557] xhci_hcd 0000:39:00.0: remove, state 4
[30621.002593] usb usb3: USB disconnect, device number 1
[30621.070713] xhci_hcd 0000:39:00.0: Host halt failed, -19
[30621.070752] xhci_hcd 0000:39:00.0: Host not accessible, reset failed.
[30621.072389] xhci_hcd 0000:39:00.0: USB bus 3 deregistered
[30621.118866] pci_bus 0000:02: Allocating resources
[30621.118930] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[30621.118970] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[30621.119003] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[30621.119041] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[30621.119066] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30621.119094] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30621.119108] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30621.119135] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30621.119177] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30621.119189] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30621.119218] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30621.119229] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30621.119240] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30621.119267] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30621.119301] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30621.119313] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30621.119325] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30621.119352] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30621.119363] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30621.119390] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30625.136337] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330 PCIe Endpoint
[30625.136522] pci 0000:39:00.0: BAR 0 [mem 0xd9f00000-0xd9f0ffff]
[30625.136572] pci 0000:39:00.0: enabling Extended Tags
[30625.136969] pci 0000:39:00.0: supports D1 D2
[30625.136978] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[30625.138298] pci_bus 0000:02: Allocating resources
[30625.138359] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[30625.138378] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[30625.138402] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[30625.138420] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[30625.138447] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30625.138457] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30625.138468] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30625.138487] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30625.138507] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30625.138527] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30625.138538] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30625.138546] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30625.138554] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30625.138572] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30625.138589] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30625.138598] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30625.138619] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30625.138628] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30625.138637] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30625.138656] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30625.139934] xhci_hcd 0000:39:00.0: xHCI Host Controller
[30625.140192] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[30625.141555] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[30625.145419] xhci_hcd 0000:39:00.0: xHCI Host Controller
[30625.145452] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[30625.145471] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[30625.145709] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[30625.145726] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[30625.145745] usb usb3: Product: xHCI Host Controller
[30625.145753] usb usb3: Manufacturer: Linux 6.14.0-rc3-00060-g6537cfb395f3 xhci-hcd
[30625.145762] usb usb3: SerialNumber: 0000:39:00.0
[30625.147873] hub 3-0:1.0: USB hub found
[30625.147945] hub 3-0:1.0: 2 ports detected
[30625.157258] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[30625.157290] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[30625.157300] usb usb4: Product: xHCI Host Controller
[30625.157309] usb usb4: Manufacturer: Linux 6.14.0-rc3-00060-g6537cfb395f3 xhci-hcd
[30625.157318] usb usb4: SerialNumber: 0000:39:00.0
[30625.158441] hub 4-0:1.0: USB hub found
[30625.158477] hub 4-0:1.0: 2 ports detected
[30625.408928] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[30625.550017] usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3
[30625.550051] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[30625.550061] usb 3-1: Product: USB2.0 Hub
[30625.550070] usb 3-1: Manufacturer: VIA Labs, Inc.
[30625.550088] usb 3-1: SerialNumber: 000000000
[30625.559733] hub 3-1:1.0: USB hub found
[30625.559998] hub 3-1:1.0: 5 ports detected
[30625.685865] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[30625.729512] usb 4-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[30625.729542] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[30625.729551] usb 4-1: Product: USB3.0 Hub
[30625.729558] usb 4-1: Manufacturer: VIA Labs, Inc.
[30625.729565] usb 4-1: SerialNumber: 000000000
[30625.734228] hub 4-1:1.0: USB hub found
[30625.734396] hub 4-1:1.0: 4 ports detected
[30626.304946] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd
[30626.443432] usb 3-1.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4
[30626.443439] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[30626.443441] usb 3-1.1: Product: USB2.0 Hub
[30626.443443] usb 3-1.1: Manufacturer: VIA Labs, Inc.
[30626.443445] usb 3-1.1: SerialNumber: 000000000
[30626.444622] hub 3-1.1:1.0: USB hub found
[30626.444719] hub 3-1.1:1.0: 4 ports detected
[30626.540935] usb 4-1.1: new SuperSpeed USB device number 3 using xhci_hcd
[30626.600057] usb 4-1.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[30626.600066] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[30626.600069] usb 4-1.1: Product: USB3.0 Hub
[30626.600071] usb 4-1.1: Manufacturer: VIA Labs, Inc.
[30626.600072] usb 4-1.1: SerialNumber: 000000000
[30626.601941] hub 4-1.1:1.0: USB hub found
[30626.602093] hub 4-1.1:1.0: 4 ports detected
[30626.781044] usb 4-1.4: new SuperSpeed USB device number 4 using xhci_hcd
[30626.799321] usb 4-1.4: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00
[30626.799350] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[30626.799362] usb 4-1.4: Product: Mass Storage Device
[30626.799371] usb 4-1.4: Manufacturer: Generic
[30626.799380] usb 4-1.4: SerialNumber: 058F84688461
[30626.806380] usb-storage 4-1.4:1.0: USB Mass Storage device detected
[30626.807172] scsi host0: usb-storage 4-1.4:1.0
[30627.841936] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6
[30627.844679] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6
[30627.847204] sd 0:0:0:0: [sda] Media removed, stopped polling
[30627.847996] sd 0:0:0:1: [sdb] Media removed, stopped polling
[30627.850504] sd 0:0:0:1: [sdb] Attached SCSI removable disk
[30627.851596] sd 0:0:0:0: [sda] Attached SCSI removable disk
[30627.912893] usb 3-1.5: new high-speed USB device number 5 using xhci_hcd
[30628.006565] usb 3-1.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[30628.006573] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[30628.006575] usb 3-1.5: Product: USB Billboard Device
[30628.006578] usb 3-1.5: Manufacturer: VIA Labs, Inc.
[30628.006580] usb 3-1.5: SerialNumber: 0000000000000001
[30630.181200] pci_bus 0000:02: Allocating resources
[30630.181219] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[30630.181223] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[30630.181226] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[30630.181229] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[30630.181232] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30630.181234] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30630.181236] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30630.181237] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30630.181241] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30630.181242] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30630.181243] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30630.181245] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30630.181246] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30630.181247] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30630.181249] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30630.181251] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30630.181252] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30630.181253] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30630.181254] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30630.181255] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30649.732359] usb 3-1: USB disconnect, device number 2
[30649.732386] usb 3-1.1: USB disconnect, device number 3
[30649.734236] usb 3-1.5: USB disconnect, device number 5
[30649.764802] xhci_hcd 0000:39:00.0: xHCI host controller not responding, assume dead
[30649.764857] xhci_hcd 0000:39:00.0: HC died; cleaning up
[30649.873728] xhci_hcd 0000:39:00.0: remove, state 1
[30649.873768] usb usb4: USB disconnect, device number 1
[30649.892812] usb 4-1: USB disconnect, device number 2
[30649.892849] usb 4-1.1: USB disconnect, device number 3
[30649.895911] usb 4-1.4: USB disconnect, device number 4
[30650.042629] xhci_hcd 0000:39:00.0: USB bus 4 deregistered
[30650.042705] xhci_hcd 0000:39:00.0: remove, state 1
[30650.042721] usb usb3: USB disconnect, device number 1
[30650.054597] xhci_hcd 0000:39:00.0: Host halt failed, -19
[30650.054632] xhci_hcd 0000:39:00.0: Host not accessible, reset failed.
[30650.056918] xhci_hcd 0000:39:00.0: USB bus 3 deregistered
[30650.095867] pci_bus 0000:02: Allocating resources
[30650.095924] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[30650.095961] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[30650.095990] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[30650.096009] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[30650.096043] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30650.096054] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30650.096080] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30650.096089] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30650.096125] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30650.096134] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30650.096160] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30650.096170] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30650.096180] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30650.096205] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30650.096223] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30650.096247] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30650.096258] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30650.096267] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30650.096290] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30650.096299] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30654.947826] pcieport 0000:02:00.0: Unable to change power state from D3hot to D0, device inaccessible
[30654.951401] pci_bus 0000:03: busn_res: [bus 03] is released
[30654.953518] pci_bus 0000:04: busn_res: [bus 04-38] is released
[30654.954010] pci_bus 0000:39: busn_res: [bus 39] is released
[30654.954450] pci_bus 0000:02: busn_res: [bus 02-39] is released
[30660.212366] pci 0000:01:00.0: [8086:1576] type 01 class 0x060400 PCIe Switch Upstream Port
[30660.212452] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[30660.212485] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[30660.212519] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[30660.212547] pci 0000:01:00.0: enabling Extended Tags
[30660.212831] pci 0000:01:00.0: supports D1 D2
[30660.212838] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[30660.212982] pci 0000:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[30660.217228] pci 0000:02:00.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[30660.217332] pci 0000:02:00.0: PCI bridge to [bus 03]
[30660.217373] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[30660.217455] pci 0000:02:00.0: enabling Extended Tags
[30660.217747] pci 0000:02:00.0: supports D1 D2
[30660.217759] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[30660.219805] pci 0000:02:01.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[30660.219918] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[30660.219960] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[30660.220005] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[30660.220056] pci 0000:02:01.0: enabling Extended Tags
[30660.220364] pci 0000:02:01.0: supports D1 D2
[30660.220376] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[30660.222130] pci 0000:02:02.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[30660.222241] pci 0000:02:02.0: PCI bridge to [bus 39]
[30660.222273] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[30660.222357] pci 0000:02:02.0: enabling Extended Tags
[30660.222658] pci 0000:02:02.0: supports D1 D2
[30660.222680] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[30660.224311] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[30660.224920] pci 0000:02:00.0: PCI bridge to [bus 03]
[30660.230360] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[30660.230820] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330 PCIe Endpoint
[30660.230982] pci 0000:39:00.0: BAR 0 [mem 0xd9f00000-0xd9f0ffff]
[30660.231038] pci 0000:39:00.0: enabling Extended Tags
[30660.231376] pci 0000:39:00.0: supports D1 D2
[30660.231386] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[30660.259291] pci 0000:02:02.0: PCI bridge to [bus 39]
[30660.259452] pci_bus 0000:02: Allocating resources
[30660.259511] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[30660.259542] pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[30660.259570] pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[30660.259592] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[30660.259623] pci 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30660.259635] pci 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30660.259659] pci 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30660.259669] pci 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30660.259704] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30660.259716] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30660.259728] pci 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30660.259749] pci 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30660.259760] pci 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30660.259771] pci 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30660.259799] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30660.259811] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30660.259834] pci 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30660.259843] pci 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30660.259854] pci 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30660.259873] pci 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30660.259885] pci 0000:02:00.0: PCI bridge to [bus 03]
[30660.259916] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[30660.259945] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[30660.259973] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[30660.259990] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[30660.260024] pci 0000:02:02.0: PCI bridge to [bus 39]
[30660.260052] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[30660.260078] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[30660.260106] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[30660.260122] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[30660.279096] xhci_hcd 0000:39:00.0: xHCI Host Controller
[30660.279144] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[30660.280549] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[30660.282294] xhci_hcd 0000:39:00.0: xHCI Host Controller
[30660.282331] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[30660.282351] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[30660.282633] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[30660.282652] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[30660.282675] usb usb3: Product: xHCI Host Controller
[30660.282686] usb usb3: Manufacturer: Linux 6.14.0-rc3-00060-g6537cfb395f3 xhci-hcd
[30660.282696] usb usb3: SerialNumber: 0000:39:00.0
[30660.293125] hub 3-0:1.0: USB hub found
[30660.293238] hub 3-0:1.0: 2 ports detected
[30660.301269] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[30660.301305] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[30660.301317] usb usb4: Product: xHCI Host Controller
[30660.301338] usb usb4: Manufacturer: Linux 6.14.0-rc3-00060-g6537cfb395f3 xhci-hcd
[30660.301349] usb usb4: SerialNumber: 0000:39:00.0
[30660.302252] hub 4-0:1.0: USB hub found
[30660.302313] hub 4-0:1.0: 2 ports detected
[30660.544682] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[30660.687052] usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3
[30660.687085] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[30660.687096] usb 3-1: Product: USB2.0 Hub
[30660.687105] usb 3-1: Manufacturer: VIA Labs, Inc.
[30660.687122] usb 3-1: SerialNumber: 000000000
[30660.693228] hub 3-1:1.0: USB hub found
[30660.693541] hub 3-1:1.0: 5 ports detected
[30660.819085] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[30660.862030] usb 4-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[30660.862052] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[30660.862060] usb 4-1: Product: USB3.0 Hub
[30660.862067] usb 4-1: Manufacturer: VIA Labs, Inc.
[30660.862073] usb 4-1: SerialNumber: 000000000
[30660.865128] hub 4-1:1.0: USB hub found
[30660.865344] hub 4-1:1.0: 4 ports detected
[30661.396875] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd
[30661.536009] usb 3-1.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4
[30661.536041] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[30661.536057] usb 3-1.1: Product: USB2.0 Hub
[30661.536069] usb 3-1.1: Manufacturer: VIA Labs, Inc.
[30661.536076] usb 3-1.1: SerialNumber: 000000000
[30661.538237] hub 3-1.1:1.0: USB hub found
[30661.538572] hub 3-1.1:1.0: 4 ports detected
[30661.632530] usb 4-1.1: new SuperSpeed USB device number 3 using xhci_hcd
[30661.692306] usb 4-1.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[30661.692338] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[30661.692352] usb 4-1.1: Product: USB3.0 Hub
[30661.692363] usb 4-1.1: Manufacturer: VIA Labs, Inc.
[30661.692373] usb 4-1.1: SerialNumber: 000000000
[30661.699897] hub 4-1.1:1.0: USB hub found
[30661.700110] hub 4-1.1:1.0: 4 ports detected
[30661.876922] usb 4-1.4: new SuperSpeed USB device number 4 using xhci_hcd
[30661.896195] usb 4-1.4: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00
[30661.896221] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[30661.896231] usb 4-1.4: Product: Mass Storage Device
[30661.896239] usb 4-1.4: Manufacturer: Generic
[30661.896246] usb 4-1.4: SerialNumber: 058F84688461
[30661.903524] usb-storage 4-1.4:1.0: USB Mass Storage device detected
[30661.904282] scsi host0: usb-storage 4-1.4:1.0
[30662.216832] usb 3-1.1.3: new high-speed USB device number 4 using xhci_hcd
[30662.934240] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6
[30662.935579] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6
[30662.936461] sd 0:0:0:0: [sda] Media removed, stopped polling
[30662.937125] sd 0:0:0:1: [sdb] Media removed, stopped polling
[30662.938452] sd 0:0:0:0: [sda] Attached SCSI removable disk
[30662.939070] sd 0:0:0:1: [sdb] Attached SCSI removable disk
[30662.952659] usb 3-1.5: new high-speed USB device number 5 using xhci_hcd
[30663.045698] usb 3-1.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[30663.045747] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[30663.045760] usb 3-1.5: Product: USB Billboard Device
[30663.045770] usb 3-1.5: Manufacturer: VIA Labs, Inc.
[30663.045781] usb 3-1.5: SerialNumber: 0000000000000001
[30665.241515] pci_bus 0000:02: Allocating resources
[30665.241558] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[30665.241576] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[30665.241586] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[30665.241601] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[30665.241615] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30665.241622] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30665.241630] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30665.241636] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30665.241652] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30665.241659] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30665.241666] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30665.241672] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30665.241677] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30665.241683] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30665.241693] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30665.241699] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30665.241706] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30665.241711] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30665.241717] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30665.241723] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30717.750507] xhci_hcd 0000:39:00.0: Giveback URB 0000000088e6e88b, len = 18, expected = 96, status = 0
[30717.750716] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30717.750738] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30717.750753] xhci_hcd 0000:39:00.0: // Ding dong!
[30717.750774] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30717.750782] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x122e43730 (dma) in stream 0 URB 00000000c460f8ab
[30717.750799] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x122e43740, cycle 1
[30717.750807] xhci_hcd 0000:39:00.0: // Ding dong!
[30717.750814] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000c460f8ab TD as cancel_status is 2
[30717.750828] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @122e43740
[30717.750837] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000c460f8ab TD
[30717.750846] xhci_hcd 0000:39:00.0: Giveback URB 00000000c460f8ab, len = 0, expected = 13, status = -32
[30717.750862] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30717.780896] xhci_hcd 0000:39:00.0: Giveback URB 0000000088e6e88b, len = 18, expected = 96, status = 0
[30717.781098] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30717.781121] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30717.781136] xhci_hcd 0000:39:00.0: // Ding dong!
[30717.781157] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30717.781165] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x122e43770 (dma) in stream 0 URB 00000000c460f8ab
[30717.781181] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x122e43780, cycle 1
[30717.781190] xhci_hcd 0000:39:00.0: // Ding dong!
[30717.781197] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000c460f8ab TD as cancel_status is 2
[30717.781211] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @122e43780
[30717.781220] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000c460f8ab TD
[30717.781229] xhci_hcd 0000:39:00.0: Giveback URB 00000000c460f8ab, len = 0, expected = 13, status = -32
[30717.781245] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30719.764414] xhci_hcd 0000:39:00.0: Giveback URB 000000004c019869, len = 18, expected = 96, status = 0
[30719.764503] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30719.764522] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30719.764539] xhci_hcd 0000:39:00.0: // Ding dong!
[30719.764569] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30719.764578] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x122e437b0 (dma) in stream 0 URB 00000000c460f8ab
[30719.764592] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x122e437c0, cycle 1
[30719.764599] xhci_hcd 0000:39:00.0: // Ding dong!
[30719.764606] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000c460f8ab TD as cancel_status is 2
[30719.764618] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @122e437c0
[30719.764626] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000c460f8ab TD
[30719.764633] xhci_hcd 0000:39:00.0: Giveback URB 00000000c460f8ab, len = 0, expected = 13, status = -32
[30719.764644] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30719.796519] xhci_hcd 0000:39:00.0: Giveback URB 000000001db5981e, len = 18, expected = 96, status = 0
[30719.796623] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30719.796636] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30719.796647] xhci_hcd 0000:39:00.0: // Ding dong!
[30719.796666] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30719.796673] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x122e437f0 (dma) in stream 0 URB 00000000c460f8ab
[30719.796686] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x122e43800, cycle 1
[30719.796693] xhci_hcd 0000:39:00.0: // Ding dong!
[30719.796700] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000c460f8ab TD as cancel_status is 2
[30719.796711] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @122e43800
[30719.796719] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000c460f8ab TD
[30719.796726] xhci_hcd 0000:39:00.0: Giveback URB 00000000c460f8ab, len = 0, expected = 13, status = -32
[30719.796737] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30721.145369] xhci_hcd 0000:39:00.0: Port change event, 3-1, id 1, portsc: 0x202a0
[30721.145399] xhci_hcd 0000:39:00.0: handle_port_status: starting usb3 port polling.
[30721.145514] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002
[30721.145542] xhci_hcd 0000:39:00.0: Get port status 3-1 read: 0x202a0, return 0x10100
[30721.145599] xhci_hcd 0000:39:00.0: clear port1 connect change, portsc: 0x2a0
[30721.145621] usb usb3-port1: status 0100, change 0001, 12 Mb/s
[30721.145646] usb 3-1: USB disconnect, device number 2
[30721.145657] usb 3-1.1: USB disconnect, device number 3
[30721.145664] usb 3-1.1: unregistering device
[30721.145672] usb 3-1.1: unregistering interface 3-1.1:1.0
[30721.146205] usb 3-1.1: usb_disable_device nuking all URBs
[30721.146220] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 00000000e711bb7f
[30721.146278] xhci_hcd 0000:39:00.0: drop ep 0x81, slot id 3, new drop flags = 0x8, new add flags = 0x0
[30721.146294] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 00000000e711bb7f
[30721.146314] xhci_hcd 0000:39:00.0: // Ding dong!
[30721.146790] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command
[30721.147447] xhci_hcd 0000:39:00.0: // Ding dong!
[30721.147537] usb 3-1.5: USB disconnect, device number 5
[30721.147550] usb 3-1.5: unregistering device
[30721.147561] usb 3-1.5: unregistering interface 3-1.5:1.0
[30721.147792] usb 3-1.5: usb_disable_device nuking all URBs
[30721.147813] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 000000008135a62e
[30721.148516] xhci_hcd 0000:39:00.0: // Ding dong!
[30721.148606] usb 3-1: unregistering device
[30721.148618] usb 3-1: unregistering interface 3-1:1.0
[30721.148810] xhci_hcd 0000:39:00.0: Cancel URB 000000002d66577d, dev 1, ep 0x81, starting at offset 0x2bedf0010
[30721.148839] xhci_hcd 0000:39:00.0: // Ding dong!
[30721.148850] xhci_hcd 0000:39:00.0: shutdown urb 000000002d66577d ep1in-intr
[30721.148875] xhci_hcd 0000:39:00.0: Stopped on Transfer TRB for slot 1 ep 2
[30721.148891] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x2bedf0010 (dma) in stream 0 URB 000000002d66577d
[30721.148912] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x2bedf0020, cycle 1
[30721.148924] xhci_hcd 0000:39:00.0: // Ding dong!
[30721.148935] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 000000002d66577d TD as cancel_status is 2
[30721.148954] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @2bedf0020
[30721.148967] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 000000002d66577d TD
[30721.148980] xhci_hcd 0000:39:00.0: Giveback URB 000000002d66577d, len = 0, expected = 1, status = -115
[30721.149000] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30721.149817] usb 3-1: usb_disable_device nuking all URBs
[30721.149839] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 00000000c8246c9d
[30721.149895] xhci_hcd 0000:39:00.0: drop ep 0x81, slot id 1, new drop flags = 0x8, new add flags = 0x0
[30721.149914] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 00000000c8246c9d
[30721.149935] xhci_hcd 0000:39:00.0: // Ding dong!
[30721.150313] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command
[30721.150949] xhci_hcd 0000:39:00.0: // Ding dong!
[30721.151047] xhci_hcd 0000:39:00.0: Get port status 3-1 read: 0x2a0, return 0x100
[30721.156523] xhci_hcd 0000:39:00.0: Port change event, 4-1, id 3, portsc: 0x4202c0
[30721.156552] xhci_hcd 0000:39:00.0: handle_port_status: starting usb4 port polling.
[30721.156629] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002
[30721.156664] xhci_hcd 0000:39:00.0: Get port status 4-1 read: 0x4202c0, return 0x4102c0
[30721.156726] xhci_hcd 0000:39:00.0: clear port1 connect change, portsc: 0x4002c0
[30721.156758] usb usb4-port1: link state change
[30721.156774] xhci_hcd 0000:39:00.0: clear port1 link state change, portsc: 0x2c0
[30721.229938] xhci_hcd 0000:39:00.0: xHCI host controller not responding, assume dead
[30721.229980] xhci_hcd 0000:39:00.0: Killing URBs for slot ID 2, ep index 0
[30721.230009] xhci_hcd 0000:39:00.0: Killing URBs for slot ID 2, ep index 2
[30721.230047] xhci_hcd 0000:39:00.0: Killing URBs for slot ID 4, ep index 0
[30721.230057] xhci_hcd 0000:39:00.0: Killing URBs for slot ID 4, ep index 2
[30721.230067] xhci_hcd 0000:39:00.0: Killing URBs for slot ID 5, ep index 0
[30721.230091] xhci_hcd 0000:39:00.0: Killing URBs for slot ID 5, ep index 1
[30721.230099] xhci_hcd 0000:39:00.0: Killing URBs for slot ID 5, ep index 4
[30721.230110] xhci_hcd 0000:39:00.0: HC died; cleaning up
[30721.230153] xhci_hcd 0000:39:00.0: CTRL: TypeReq=0xa300 val=0x0 idx=0x1 len=4 ==> -19
[30721.230201] usb usb4-port1: Wait for inactive link disconnect detect
[30721.288709] xhci_hcd 0000:39:00.0: xhci_hub_status_data: stopping usb4 port polling
[30721.288741] xhci_hcd 0000:39:00.0: xhci_hub_status_data: stopping usb3 port polling
[30721.288837] hub 3-0:1.0: state 0 ports 2 chg 0000 evt 0000
[30721.289081] usb usb4-port1: Wait for inactive link disconnect detect
[30721.312080] usb usb4-port1: Wait for inactive link disconnect detect
[30721.336164] usb usb4-port1: Wait for inactive link disconnect detect
[30721.354598] xhci_hcd 0000:39:00.0: remove, state 1
[30721.354638] xhci_hcd 0000:39:00.0: roothub graceful disconnect
[30721.354671] usb usb4: USB disconnect, device number 1
[30721.360194] usb usb4-port1: Wait for inactive link disconnect detect
[30721.360230] usb usb4-port1: do warm reset, port only
[30721.360265] usb usb4-port1: status 02c0, change 0041, 10.0 Gb/s
[30721.360285] usb 4-1: USB disconnect, device number 2
[30721.360314] usb 4-1.1: USB disconnect, device number 3
[30721.360326] usb 4-1.1: unregistering device
[30721.360334] usb 4-1.1: unregistering interface 4-1.1:1.0
[30721.361968] usb 4-1.1: usb_disable_device nuking all URBs
[30721.362971] usb 4-1.4: USB disconnect, device number 4
[30721.362986] usb 4-1.4: unregistering device
[30721.363009] usb 4-1.4: unregistering interface 4-1.4:1.0
[30721.553435] usb 4-1.4: usb_disable_device nuking all URBs
[30721.555327] usb 4-1: unregistering device
[30721.555345] usb 4-1: unregistering interface 4-1:1.0
[30721.558861] usb 4-1: usb_disable_device nuking all URBs
[30721.560175] hub 4-0:1.0: state 0 ports 2 chg 0000 evt 0000
[30721.560202] usb usb4: unregistering device
[30721.560237] usb usb4: unregistering interface 4-0:1.0
[30721.560711] xhci_hcd 0000:39:00.0: shutdown urb 00000000d78f67dc ep1in-intr
[30721.561281] usb usb4: usb_disable_device nuking all URBs
[30721.561314] xHCI xhci_drop_endpoint called for root hub
[30721.561325] xHCI xhci_check_bandwidth called for root hub
[30721.564936] xhci_hcd 0000:39:00.0: USB bus 4 deregistered
[30721.565012] xhci_hcd 0000:39:00.0: remove, state 1
[30721.565024] xhci_hcd 0000:39:00.0: roothub graceful disconnect
[30721.565053] usb usb3: USB disconnect, device number 1
[30721.565066] usb usb3: unregistering device
[30721.565075] usb usb3: unregistering interface 3-0:1.0
[30721.566709] usb usb3: usb_disable_device nuking all URBs
[30721.566726] xHCI xhci_drop_endpoint called for root hub
[30721.566753] xHCI xhci_check_bandwidth called for root hub
[30721.567424] xhci_hcd 0000:39:00.0: // Halt the HC
[30721.567461] xhci_hcd 0000:39:00.0: Host halt failed, -19
[30721.567474] xhci_hcd 0000:39:00.0: Host not accessible, reset failed.
[30721.567498] xhci_hcd 0000:39:00.0: // Disabling event ring interrupts
[30721.567511] xhci_hcd 0000:39:00.0: cleaning up memory
[30721.567548] xhci_hcd 0000:39:00.0: Freed interrupters
[30721.567559] xhci_hcd 0000:39:00.0: Freed command ring
[30721.567646] xhci_hcd 0000:39:00.0: Freed segment pool
[30721.567688] xhci_hcd 0000:39:00.0: Freed device context pool
[30721.567714] xhci_hcd 0000:39:00.0: Freed small stream array pool
[30721.567724] xhci_hcd 0000:39:00.0: Freed medium stream array pool
[30721.568082] xhci_hcd 0000:39:00.0: xhci_stop completed - status = ffffffff
[30721.568517] xhci_hcd 0000:39:00.0: USB bus 3 deregistered
[30721.617681] pci_bus 0000:02: Allocating resources
[30721.617763] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[30721.617803] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[30721.617835] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[30721.617875] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[30721.617899] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30721.617928] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30721.617942] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30721.617968] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30721.618012] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30721.618025] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30721.618053] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30721.618064] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30721.618076] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30721.618102] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30721.618136] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30721.618149] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30721.618161] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30721.618187] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30721.618199] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30721.618226] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30726.522584] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330 PCIe Endpoint
[30726.522780] pci 0000:39:00.0: BAR 0 [mem 0xd9f00000-0xd9f0ffff]
[30726.522839] pci 0000:39:00.0: enabling Extended Tags
[30726.524785] pci 0000:39:00.0: supports D1 D2
[30726.524794] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[30726.528858] pcieport 0000:02:02.0: ASPM: current common clock configuration is inconsistent, reconfiguring
[30726.530821] pci_bus 0000:02: Allocating resources
[30726.530912] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[30726.530949] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[30726.530965] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[30726.530998] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[30726.531016] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30726.531040] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30726.531052] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30726.531060] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30726.531097] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30726.531122] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30726.531133] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30726.531142] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30726.531166] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30726.531175] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30726.531206] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30726.531216] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30726.531226] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30726.531250] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30726.531259] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30726.531268] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30726.534370] xhci_hcd 0000:39:00.0: xHCI Host Controller
[30726.534431] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[30726.534483] xhci_hcd 0000:39:00.0: // Halt the HC
[30726.534498] xhci_hcd 0000:39:00.0: Resetting HCD
[30726.534521] xhci_hcd 0000:39:00.0: // Reset the HC
[30726.535526] xhci_hcd 0000:39:00.0: Wait for controller to be ready for doorbell rings
[30726.535554] xhci_hcd 0000:39:00.0: Reset complete
[30726.535561] xhci_hcd 0000:39:00.0: Enabling 64-bit DMA addresses.
[30726.535569] xhci_hcd 0000:39:00.0: Calling HCD init
[30726.535576] xhci_hcd 0000:39:00.0: xhci_init
[30726.535600] xhci_hcd 0000:39:00.0: Supported page size register = 0x1
[30726.535610] xhci_hcd 0000:39:00.0: Supported page size of 8K
[30726.535618] xhci_hcd 0000:39:00.0: HCD page size set to 4K
[30726.535643] xhci_hcd 0000:39:00.0: // xHC can handle at most 64 device slots.
[30726.535653] xhci_hcd 0000:39:00.0: // Setting Max device slots reg = 0x40.
[30726.535684] xhci_hcd 0000:39:00.0: // Device context base array address = 0x0x0000000106e0a000 (DMA), 00000000bfcee585 (virt)
[30726.535726] xhci_hcd 0000:39:00.0: Allocated command ring at 00000000a82b1335
[30726.535735] xhci_hcd 0000:39:00.0: First segment DMA is 0x0x0000000122784000
[30726.535747] xhci_hcd 0000:39:00.0: // Setting command ring address to 0x0000000122784001
[30726.535773] xhci_hcd 0000:39:00.0: // Doorbell array is located at offset 0x3000 from cap regs base addr
[30726.535782] xhci_hcd 0000:39:00.0: Allocating primary event ring
[30726.535826] xhci_hcd 0000:39:00.0: // Write event ring dequeue pointer, preserving EHB bit
[30726.535836] xhci_hcd 0000:39:00.0: Allocating 34 scratchpad buffers
[30726.539755] xhci_hcd 0000:39:00.0: Ext Cap 00000000f7e53b7f, port offset = 1, count = 2, revision = 0x2
[30726.539791] xhci_hcd 0000:39:00.0: PSIV:1 PSIE:2 PLT:0 PFD:0 LP:0 PSIM:12
[30726.539820] xhci_hcd 0000:39:00.0: PSIV:2 PSIE:1 PLT:0 PFD:0 LP:0 PSIM:1500
[30726.539833] xhci_hcd 0000:39:00.0: PSIV:3 PSIE:2 PLT:0 PFD:0 LP:0 PSIM:480
[30726.539858] xhci_hcd 0000:39:00.0: xHCI 1.0: support USB2 hardware lpm
[30726.539927] xhci_hcd 0000:39:00.0: Ext Cap 00000000c2fe80fb, port offset = 3, count = 2, revision = 0x3
[30726.539954] xhci_hcd 0000:39:00.0: PSIV:4 PSIE:3 PLT:0 PFD:1 LP:0 PSIM:5
[30726.539963] xhci_hcd 0000:39:00.0: PSIV:5 PSIE:3 PLT:0 PFD:1 LP:0 PSIM:10
[30726.540003] xhci_hcd 0000:39:00.0: Found 2 USB 2.0 ports and 2 USB 3.0 ports.
[30726.540030] xhci_hcd 0000:39:00.0: Finished xhci_init
[30726.540036] xhci_hcd 0000:39:00.0: Called HCD init
[30726.540042] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[30726.540056] xhci_hcd 0000:39:00.0: Got SBRN 48
[30726.540085] xhci_hcd 0000:39:00.0: MWI active
[30726.540090] xhci_hcd 0000:39:00.0: Finished xhci_pci_reinit
[30726.540096] xhci_hcd 0000:39:00.0: supports USB remote wakeup
[30726.540590] xhci_hcd 0000:39:00.0: xhci_run
[30726.540600] xhci_hcd 0000:39:00.0: ERST deq = 64'h26ff5b000
[30726.540608] xhci_hcd 0000:39:00.0: Finished xhci_run for main hcd
[30726.541201] xhci_hcd 0000:39:00.0: xHCI Host Controller
[30726.541215] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[30726.541243] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[30726.541250] xhci_hcd 0000:39:00.0: supports USB remote wakeup
[30726.541255] xhci_hcd 0000:39:00.0: Enable interrupts
[30726.541263] xhci_hcd 0000:39:00.0: Enable primary interrupter
[30726.541287] xhci_hcd 0000:39:00.0: // Turn on HC, cmd = 0x5.
[30726.542984] usb usb3: default language 0x0409
[30726.543072] usb usb3: udev 1, busnum 3, minor = 256
[30726.543101] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[30726.543113] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[30726.543137] usb usb3: Product: xHCI Host Controller
[30726.543146] usb usb3: Manufacturer: Linux 6.14.0-rc3-00060-g6537cfb395f3 xhci-hcd
[30726.543154] usb usb3: SerialNumber: 0000:39:00.0
[30726.546002] usb usb3: usb_probe_device
[30726.546015] usb usb3: configuration #1 chosen from 1 choice
[30726.546042] xHCI xhci_add_endpoint called for root hub
[30726.546049] xHCI xhci_check_bandwidth called for root hub
[30726.546102] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[30726.546271] hub 3-0:1.0: usb_probe_interface
[30726.546278] hub 3-0:1.0: usb_probe_interface - got id
[30726.546301] hub 3-0:1.0: USB hub found
[30726.546347] hub 3-0:1.0: 2 ports detected
[30726.546356] hub 3-0:1.0: standalone hub
[30726.546361] hub 3-0:1.0: no power switching (usb 1.0)
[30726.546366] hub 3-0:1.0: individual port over-current protection
[30726.546387] hub 3-0:1.0: Single TT
[30726.546393] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
[30726.546402] hub 3-0:1.0: power on to power good time: 20ms
[30726.546445] hub 3-0:1.0: local power source is good
[30726.554906] hub 3-0:1.0: trying to enable port power on non-switchable hub
[30726.554956] xhci_hcd 0000:39:00.0: set port power 3-1 ON, portsc: 0x2a0
[30726.555009] xhci_hcd 0000:39:00.0: set port power 3-2 ON, portsc: 0x2a0
[30726.555654] xhci_hcd 0000:39:00.0: Port change event, 3-1, id 1, portsc: 0x206e1
[30726.555688] xhci_hcd 0000:39:00.0: handle_port_status: starting usb3 port polling.
[30726.555916] usb usb4: skipped 1 descriptor after endpoint
[30726.555959] usb usb4: default language 0x0409
[30726.556108] usb usb4: udev 1, busnum 4, minor = 384
[30726.556121] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[30726.556134] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[30726.556157] usb usb4: Product: xHCI Host Controller
[30726.556164] usb usb4: Manufacturer: Linux 6.14.0-rc3-00060-g6537cfb395f3 xhci-hcd
[30726.556172] usb usb4: SerialNumber: 0000:39:00.0
[30726.558412] usb usb4: usb_probe_device
[30726.558426] usb usb4: configuration #1 chosen from 1 choice
[30726.558455] xHCI xhci_add_endpoint called for root hub
[30726.558464] xHCI xhci_check_bandwidth called for root hub
[30726.558549] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[30726.558771] hub 4-0:1.0: usb_probe_interface
[30726.558796] hub 4-0:1.0: usb_probe_interface - got id
[30726.558808] hub 4-0:1.0: USB hub found
[30726.560385] hub 4-0:1.0: 2 ports detected
[30726.560400] hub 4-0:1.0: standalone hub
[30726.560408] hub 4-0:1.0: no power switching (usb 1.0)
[30726.560429] hub 4-0:1.0: individual port over-current protection
[30726.560436] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns)
[30726.560446] hub 4-0:1.0: power on to power good time: 100ms
[30726.560534] hub 4-0:1.0: local power source is good
[30726.566902] usb usb4-port1: peered to usb3-port1
[30726.568410] usb usb4: port-1 no _DSM function 5
[30726.568440] usb usb4: port-1 disable U1/U2 _DSM: -19
[30726.569778] usb usb4: port-2 no _DSM function 5
[30726.569788] usb usb4: port-2 disable U1/U2 _DSM: -19
[30726.569796] hub 4-0:1.0: trying to enable port power on non-switchable hub
[30726.569824] xhci_hcd 0000:39:00.0: set port power 4-1 ON, portsc: 0x210
[30726.569875] xhci_hcd 0000:39:00.0: set port power 4-2 ON, portsc: 0x2a0
[30726.580075] xhci_hcd 0000:39:00.0: Get port status 3-1 read: 0x206e1, return 0x10101
[30726.580166] usb usb3-port1: status 0101 change 0001
[30726.580202] xhci_hcd 0000:39:00.0: clear port1 connect change, portsc: 0x6e1
[30726.580248] xhci_hcd 0000:39:00.0: Get port status 3-2 read: 0x2a0, return 0x100
[30726.639114] xhci_hcd 0000:39:00.0: Port change event, 4-1, id 3, portsc: 0x221203
[30726.639155] xhci_hcd 0000:39:00.0: handle_port_status: starting usb4 port polling.
[30726.672087] xhci_hcd 0000:39:00.0: Get port status 4-1 read: 0x221203, return 0x110203
[30726.672176] usb usb4-port1: status 0203 change 0011
[30726.672215] xhci_hcd 0000:39:00.0: clear port1 connect change, portsc: 0x201203
[30726.672267] xhci_hcd 0000:39:00.0: clear port1 reset change, portsc: 0x1203
[30726.672310] xhci_hcd 0000:39:00.0: Get port status 4-2 read: 0x2a0, return 0x2a0
[30726.688171] hub 3-0:1.0: state 7 ports 2 chg 0002 evt 0000
[30726.688216] xhci_hcd 0000:39:00.0: Get port status 3-1 read: 0x6e1, return 0x101
[30726.688270] usb usb3-port1: status 0101, change 0000, 12 Mb/s
[30726.688309] xhci_hcd 0000:39:00.0: // Ding dong!
[30726.688399] xhci_hcd 0000:39:00.0: Slot 1 output ctx = 0x0x000000013b07f000 (dma)
[30726.688431] xhci_hcd 0000:39:00.0: Slot 1 input ctx = 0x0x000000011d17e000 (dma)
[30726.688453] xhci_hcd 0000:39:00.0: Set slot id 1 dcbaa entry 00000000e61753d7 to 0x13b07f000
[30726.688582] xhci_hcd 0000:39:00.0: set port reset, actual port 3-1 status = 0x791
[30726.743731] xhci_hcd 0000:39:00.0: Port change event, 3-1, id 1, portsc: 0x200e03
[30726.743769] xhci_hcd 0000:39:00.0: handle_port_status: starting usb3 port polling.
[30726.756111] xhci_hcd 0000:39:00.0: Get port status 3-1 read: 0x200e03, return 0x100503
[30726.756167] xhci_hcd 0000:39:00.0: clear port1 reset change, portsc: 0xe03
[30726.776089] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000
[30726.776114] xhci_hcd 0000:39:00.0: Get port status 4-1 read: 0x1203, return 0x203
[30726.776156] usb usb4-port1: status 0203, change 0000, 10.0 Gb/s
[30726.812073] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[30726.812107] xhci_hcd 0000:39:00.0: Slot ID 1: HW portnum 0, hcd portnum 0
[30726.812118] xhci_hcd 0000:39:00.0: udev->tt = 0000000000000000
[30726.812136] xhci_hcd 0000:39:00.0: udev->ttport = 0x0
[30726.812145] xhci_hcd 0000:39:00.0: // Ding dong!
[30726.812196] xhci_hcd 0000:39:00.0: Successful setup context command
[30726.812206] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x00000106e0a000
[30726.812224] xhci_hcd 0000:39:00.0: Slot ID 1 dcbaa entry @00000000e61753d7 = 0x0000013b07f000
[30726.812232] xhci_hcd 0000:39:00.0: Output Context DMA address = 0x13b07f000
[30726.812238] xhci_hcd 0000:39:00.0: Internal device address = 0
[30726.812482] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30726.812558] xhci_hcd 0000:39:00.0: set port reset, actual port 3-1 status = 0xf91
[30726.867652] xhci_hcd 0000:39:00.0: Port change event, 3-1, id 1, portsc: 0x200e03
[30726.867686] xhci_hcd 0000:39:00.0: handle_port_status: starting usb3 port polling.
[30726.877300] xhci_hcd 0000:39:00.0: Get port status 3-1 read: 0x200e03, return 0x100503
[30726.877374] xhci_hcd 0000:39:00.0: clear port1 reset change, portsc: 0xe03
[30726.932073] xhci_hcd 0000:39:00.0: Resetting device with slot ID 1
[30726.932107] xhci_hcd 0000:39:00.0: // Ding dong!
[30726.932130] xhci_hcd 0000:39:00.0: Completed reset device command.
[30726.932159] xhci_hcd 0000:39:00.0: Can't reset device (slot ID 1) in default state
[30726.932165] xhci_hcd 0000:39:00.0: Not freeing device rings.
[30726.932182] xhci_hcd 0000:39:00.0: // Ding dong!
[30726.932387] xhci_hcd 0000:39:00.0: Successful setup address command
[30726.932399] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x00000106e0a000
[30726.932417] xhci_hcd 0000:39:00.0: Slot ID 1 dcbaa entry @00000000e61753d7 = 0x0000013b07f000
[30726.932428] xhci_hcd 0000:39:00.0: Output Context DMA address = 0x13b07f000
[30726.932434] xhci_hcd 0000:39:00.0: Internal device address = 1
[30726.948753] xhci_hcd 0000:39:00.0: // Ding dong!
[30726.948879] xhci_hcd 0000:39:00.0: Slot 2 output ctx = 0x0x000000045483a000 (dma)
[30726.948912] xhci_hcd 0000:39:00.0: Slot 2 input ctx = 0x0x000000013688f000 (dma)
[30726.948948] xhci_hcd 0000:39:00.0: Set slot id 2 dcbaa entry 000000008608b667 to 0x45483a000
[30726.949061] xhci_hcd 0000:39:00.0: Get port status 4-1 read: 0x1203, return 0x203
[30726.949139] xhci_hcd 0000:39:00.0: set port reset, actual port 4-1 status = 0x1311
[30726.949651] xhci_hcd 0000:39:00.0: Port change event, 4-1, id 3, portsc: 0x201203
[30726.949668] xhci_hcd 0000:39:00.0: handle_port_status: starting usb4 port polling.
[30726.949906] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30726.949959] usb 3-1: default language 0x0409
[30726.950101] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30726.950315] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30726.950513] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30726.953613] usb 3-1: udev 2, busnum 3, minor = 257
[30726.953633] usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3
[30726.953657] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[30726.953667] usb 3-1: Product: USB2.0 Hub
[30726.953677] usb 3-1: Manufacturer: VIA Labs, Inc.
[30726.953696] usb 3-1: SerialNumber: 000000000
[30726.955083] usb 3-1: usb_probe_device
[30726.955098] usb 3-1: configuration #1 chosen from 1 choice
[30726.955144] xhci_hcd 0000:39:00.0: add ep 0x81, slot id 1, new drop flags = 0x0, new add flags = 0x8
[30726.955168] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 000000009182f890
[30726.955198] xhci_hcd 0000:39:00.0: // Ding dong!
[30726.955503] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command
[30726.955586] xhci_hcd 0000:39:00.0: // Ding dong!
[30726.955611] xhci_hcd 0000:39:00.0: Stopped on No-op or Link TRB for slot 1 ep 2
[30726.955744] xhci_hcd 0000:39:00.0: // Ding dong!
[30726.956369] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
[30726.957328] hub 3-1:1.0: usb_probe_interface
[30726.957352] hub 3-1:1.0: usb_probe_interface - got id
[30726.957366] hub 3-1:1.0: USB hub found
[30726.957482] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30726.957532] hub 3-1:1.0: 5 ports detected
[30726.957543] hub 3-1:1.0: standalone hub
[30726.957549] hub 3-1:1.0: individual port power switching
[30726.957557] hub 3-1:1.0: individual port over-current protection
[30726.957577] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 000000009182f890
[30726.957635] xhci_hcd 0000:39:00.0: drop ep 0x81, slot id 1, new drop flags = 0x8, new add flags = 0x0
[30726.957676] xhci_hcd 0000:39:00.0: add ep 0x81, slot id 1, new drop flags = 0x8, new add flags = 0x8
[30726.957698] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 000000009182f890
[30726.957714] xhci_hcd 0000:39:00.0: // Ding dong!
[30726.957999] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command
[30726.958185] xhci_hcd 0000:39:00.0: // Ding dong!
[30726.958217] xhci_hcd 0000:39:00.0: Stopped on No-op or Link TRB for slot 1 ep 2
[30726.958242] xhci_hcd 0000:39:00.0: // Ding dong!
[30726.958596] hub 3-1:1.0: TT per port
[30726.958616] hub 3-1:1.0: TT requires at most 32 FS bit times (2664 ns)
[30726.958626] hub 3-1:1.0: Port indicators are supported
[30726.958633] hub 3-1:1.0: power on to power good time: 350ms
[30726.959002] hub 3-1:1.0: local power source is good
[30726.959413] xhci_hcd 0000:39:00.0: xHCI version 110 needs hub TT think time and number of ports
[30726.959434] xhci_hcd 0000:39:00.0: Set up configure endpoint for hub device.
[30726.959445] xhci_hcd 0000:39:00.0: // Ding dong!
[30726.959708] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command
[30726.959733] hub 3-1:1.0: enabling power on all ports
[30727.012058] xhci_hcd 0000:39:00.0: Get port status 4-1 read: 0x201203, return 0x100203
[30727.016041] xhci_hcd 0000:39:00.0: clear port1 reset change, portsc: 0x1203
[30727.016118] xhci_hcd 0000:39:00.0: clear port1 warm(BH) reset change, portsc: 0x1203
[30727.016159] xhci_hcd 0000:39:00.0: clear port1 link state change, portsc: 0x1203
[30727.016198] xhci_hcd 0000:39:00.0: clear port1 connect change, portsc: 0x1203
[30727.016236] xhci_hcd 0000:39:00.0: Get port status 4-1 read: 0x1203, return 0x203
[30727.072064] xhci_hcd 0000:39:00.0: Slot ID 2: HW portnum 2, hcd portnum 0
[30727.072081] xhci_hcd 0000:39:00.0: udev->tt = 0000000000000000
[30727.072099] xhci_hcd 0000:39:00.0: udev->ttport = 0x0
[30727.072108] xhci_hcd 0000:39:00.0: // Ding dong!
[30727.086007] xhci_hcd 0000:39:00.0: Successful setup address command
[30727.086035] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x00000106e0a000
[30727.086044] xhci_hcd 0000:39:00.0: Slot ID 2 dcbaa entry @000000008608b667 = 0x0000045483a000
[30727.086065] xhci_hcd 0000:39:00.0: Output Context DMA address = 0x45483a000
[30727.086072] xhci_hcd 0000:39:00.0: Internal device address = 2
[30727.086085] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[30727.086417] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[30727.127584] usb 4-1: link tunnel state unknown
[30727.127927] usb 4-1: skipped 1 descriptor after endpoint
[30727.128088] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30727.128126] usb 4-1: default language 0x0409
[30727.128305] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30727.128525] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30727.128724] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30727.128743] usb 4-1: udev 2, busnum 4, minor = 385
[30727.128764] usb 4-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[30727.128773] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[30727.128779] usb 4-1: Product: USB3.0 Hub
[30727.128785] usb 4-1: Manufacturer: VIA Labs, Inc.
[30727.128789] usb 4-1: SerialNumber: 000000000
[30727.133538] usb 4-1: usb_probe_device
[30727.133565] usb 4-1: configuration #1 chosen from 1 choice
[30727.133603] xhci_hcd 0000:39:00.0: add ep 0x81, slot id 2, new drop flags = 0x0, new add flags = 0x8
[30727.133619] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 000000002dd2d892
[30727.133648] xhci_hcd 0000:39:00.0: // Ding dong!
[30727.133908] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command
[30727.133974] xhci_hcd 0000:39:00.0: // Ding dong!
[30727.134008] xhci_hcd 0000:39:00.0: Stopped on No-op or Link TRB for slot 2 ep 2
[30727.134042] xhci_hcd 0000:39:00.0: // Ding dong!
[30727.134565] xhci_hcd 0000:39:00.0: Set up evaluate context for LPM MEL change.
[30727.134590] xhci_hcd 0000:39:00.0: // Ding dong!
[30727.134644] xhci_hcd 0000:39:00.0: Successful evaluate context command
[30727.134816] xhci_hcd 0000:39:00.0: Set up evaluate context for LPM MEL change.
[30727.134829] xhci_hcd 0000:39:00.0: // Ding dong!
[30727.134860] xhci_hcd 0000:39:00.0: Successful evaluate context command
[30727.135007] usb 4-1: adding 4-1:1.0 (config #1, interface 0)
[30727.135636] hub 4-1:1.0: usb_probe_interface
[30727.135648] hub 4-1:1.0: usb_probe_interface - got id
[30727.135670] hub 4-1:1.0: USB hub found
[30727.135830] hub 4-1:1.0: 4 ports detected
[30727.135851] hub 4-1:1.0: standalone hub
[30727.135855] hub 4-1:1.0: individual port power switching
[30727.135860] hub 4-1:1.0: individual port over-current protection
[30727.135864] hub 4-1:1.0: TT requires at most 8 FS bit times (666 ns)
[30727.135870] hub 4-1:1.0: power on to power good time: 350ms
[30727.136195] hub 4-1:1.0: local power source is good
[30727.137797] usb 4-1-port1: peered to 3-1-port1
[30727.137864] usb 4-1-port2: peered to 3-1-port2
[30727.137932] usb 4-1-port3: peered to 3-1-port3
[30727.137993] usb 4-1-port4: peered to 3-1-port4
[30727.138016] xhci_hcd 0000:39:00.0: xHCI version 110 needs hub TT think time and number of ports
[30727.138023] xhci_hcd 0000:39:00.0: Set up configure endpoint for hub device.
[30727.138032] xhci_hcd 0000:39:00.0: // Ding dong!
[30727.138340] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command
[30727.188018] xhci_hcd 0000:39:00.0: xhci_hub_status_data: stopping usb3 port polling
[30727.188045] xhci_hcd 0000:39:00.0: xhci_hub_status_data: stopping usb4 port polling
[30727.238935] hub 4-1:1.0: enabling power on all ports
[30727.240034] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[30727.444321] usb 3-1-port1: status 0101 change 0001
[30727.548067] hub 3-1:1.0: state 7 ports 5 chg 0002 evt 0000
[30727.548358] usb 3-1-port1: status 0101, change 0000, 12 Mb/s
[30727.548671] usb 3-1-port1: indicator auto status 0
[30727.548713] xhci_hcd 0000:39:00.0: // Ding dong!
[30727.548798] xhci_hcd 0000:39:00.0: Slot 3 output ctx = 0x0x000000013c637000 (dma)
[30727.548831] xhci_hcd 0000:39:00.0: Slot 3 input ctx = 0x0x0000000277e38000 (dma)
[30727.548866] xhci_hcd 0000:39:00.0: Set slot id 3 dcbaa entry 00000000a4bdf2f9 to 0x13c637000
[30727.604316] usb 4-1-port1: status 0203 change 0011
[30727.605454] usb 4-1-port4: status 0203 change 0011
[30727.676059] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd
[30727.676099] xhci_hcd 0000:39:00.0: Slot ID 3: HW portnum 0, hcd portnum 0
[30727.676113] xhci_hcd 0000:39:00.0: udev->tt = 0000000000000000
[30727.676133] xhci_hcd 0000:39:00.0: udev->ttport = 0x0
[30727.676147] xhci_hcd 0000:39:00.0: // Ding dong!
[30727.676213] xhci_hcd 0000:39:00.0: Successful setup context command
[30727.676226] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x00000106e0a000
[30727.676237] xhci_hcd 0000:39:00.0: Slot ID 3 dcbaa entry @00000000a4bdf2f9 = 0x0000013c637000
[30727.676260] xhci_hcd 0000:39:00.0: Output Context DMA address = 0x13c637000
[30727.676269] xhci_hcd 0000:39:00.0: Internal device address = 0
[30727.676489] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30727.708071] hub 4-1:1.0: state 7 ports 4 chg 0012 evt 0000
[30727.727131] usb 4-1-port1: status 0203, change 0000, 5.0 Gb/s
[30727.804038] xhci_hcd 0000:39:00.0: Resetting device with slot ID 3
[30727.804081] xhci_hcd 0000:39:00.0: // Ding dong!
[30727.804143] xhci_hcd 0000:39:00.0: Completed reset device command.
[30727.804211] xhci_hcd 0000:39:00.0: Can't reset device (slot ID 3) in default state
[30727.804223] xhci_hcd 0000:39:00.0: Not freeing device rings.
[30727.804258] xhci_hcd 0000:39:00.0: // Ding dong!
[30727.804426] xhci_hcd 0000:39:00.0: Successful setup address command
[30727.804442] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x00000106e0a000
[30727.804465] xhci_hcd 0000:39:00.0: Slot ID 3 dcbaa entry @00000000a4bdf2f9 = 0x0000013c637000
[30727.804482] xhci_hcd 0000:39:00.0: Output Context DMA address = 0x13c637000
[30727.804493] xhci_hcd 0000:39:00.0: Internal device address = 3
[30727.824760] xhci_hcd 0000:39:00.0: // Ding dong!
[30727.824846] xhci_hcd 0000:39:00.0: Slot 4 output ctx = 0x0x00000001afcaf000 (dma)
[30727.824898] xhci_hcd 0000:39:00.0: Slot 4 input ctx = 0x0x00000001032ec000 (dma)
[30727.824938] xhci_hcd 0000:39:00.0: Set slot id 4 dcbaa entry 0000000052f4671a to 0x1afcaf000
[30727.828992] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30727.829044] usb 3-1.1: default language 0x0409
[30727.829211] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30727.829431] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30727.829673] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30727.829729] usb 3-1.1: udev 3, busnum 3, minor = 258
[30727.829745] usb 3-1.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4
[30727.829772] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[30727.829784] usb 3-1.1: Product: USB2.0 Hub
[30727.829795] usb 3-1.1: Manufacturer: VIA Labs, Inc.
[30727.829816] usb 3-1.1: SerialNumber: 000000000
[30727.830406] usb 3-1.1: usb_probe_device
[30727.830431] usb 3-1.1: configuration #1 chosen from 1 choice
[30727.830480] xhci_hcd 0000:39:00.0: add ep 0x81, slot id 3, new drop flags = 0x0, new add flags = 0x8
[30727.830498] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 0000000002d1665d
[30727.830530] xhci_hcd 0000:39:00.0: // Ding dong!
[30727.830891] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command
[30727.830994] xhci_hcd 0000:39:00.0: // Ding dong!
[30727.831019] xhci_hcd 0000:39:00.0: Stopped on No-op or Link TRB for slot 3 ep 2
[30727.831059] xhci_hcd 0000:39:00.0: // Ding dong!
[30727.831674] usb 3-1.1: adding 3-1.1:1.0 (config #1, interface 0)
[30727.831886] hub 3-1.1:1.0: usb_probe_interface
[30727.831908] hub 3-1.1:1.0: usb_probe_interface - got id
[30727.831922] hub 3-1.1:1.0: USB hub found
[30727.832135] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30727.832186] hub 3-1.1:1.0: 4 ports detected
[30727.832199] hub 3-1.1:1.0: standalone hub
[30727.832218] hub 3-1.1:1.0: individual port power switching
[30727.832227] hub 3-1.1:1.0: individual port over-current protection
[30727.832239] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 0000000002d1665d
[30727.832313] xhci_hcd 0000:39:00.0: drop ep 0x81, slot id 3, new drop flags = 0x8, new add flags = 0x0
[30727.832357] xhci_hcd 0000:39:00.0: add ep 0x81, slot id 3, new drop flags = 0x8, new add flags = 0x8
[30727.832369] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 0000000002d1665d
[30727.832395] xhci_hcd 0000:39:00.0: // Ding dong!
[30727.832760] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command
[30727.832962] xhci_hcd 0000:39:00.0: // Ding dong!
[30727.832985] xhci_hcd 0000:39:00.0: Stopped on No-op or Link TRB for slot 3 ep 2
[30727.833021] xhci_hcd 0000:39:00.0: // Ding dong!
[30727.833592] hub 3-1.1:1.0: TT per port
[30727.833614] hub 3-1.1:1.0: TT requires at most 32 FS bit times (2664 ns)
[30727.833627] hub 3-1.1:1.0: Port indicators are supported
[30727.833636] hub 3-1.1:1.0: power on to power good time: 350ms
[30727.834112] hub 3-1.1:1.0: local power source is good
[30727.836187] xhci_hcd 0000:39:00.0: xHCI version 110 needs hub TT think time and number of ports
[30727.836205] xhci_hcd 0000:39:00.0: Set up configure endpoint for hub device.
[30727.836231] xhci_hcd 0000:39:00.0: // Ding dong!
[30727.837295] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command
[30727.837325] hub 3-1.1:1.0: enabling power on all ports
[30727.901232] xhci_hcd 0000:39:00.0: Slot ID 4: HW portnum 2, hcd portnum 0
[30727.901263] xhci_hcd 0000:39:00.0: udev->tt = 0000000000000000
[30727.901272] xhci_hcd 0000:39:00.0: udev->ttport = 0x0
[30727.901281] xhci_hcd 0000:39:00.0: // Ding dong!
[30727.928530] xhci_hcd 0000:39:00.0: Successful setup address command
[30727.928563] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x00000106e0a000
[30727.928574] xhci_hcd 0000:39:00.0: Slot ID 4 dcbaa entry @0000000052f4671a = 0x000001afcaf000
[30727.928596] xhci_hcd 0000:39:00.0: Output Context DMA address = 0x1afcaf000
[30727.928604] xhci_hcd 0000:39:00.0: Internal device address = 4
[30727.928631] usb 4-1.1: new SuperSpeed USB device number 3 using xhci_hcd
[30727.986778] usb 4-1.1: skipped 1 descriptor after endpoint
[30727.986941] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30727.987018] usb 4-1.1: default language 0x0409
[30727.987196] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30727.987431] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30727.987657] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30727.987725] usb 4-1.1: udev 3, busnum 4, minor = 386
[30727.987741] usb 4-1.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[30727.987769] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[30727.987780] usb 4-1.1: Product: USB3.0 Hub
[30727.987791] usb 4-1.1: Manufacturer: VIA Labs, Inc.
[30727.987812] usb 4-1.1: SerialNumber: 000000000
[30727.989605] usb 4-1.1: usb_probe_device
[30727.989623] usb 4-1.1: configuration #1 chosen from 1 choice
[30727.989665] xhci_hcd 0000:39:00.0: add ep 0x81, slot id 4, new drop flags = 0x0, new add flags = 0x8
[30727.989693] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 00000000fc2c7b5a
[30727.989727] xhci_hcd 0000:39:00.0: // Ding dong!
[30727.990098] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command
[30727.990185] xhci_hcd 0000:39:00.0: // Ding dong!
[30727.990222] xhci_hcd 0000:39:00.0: Stopped on No-op or Link TRB for slot 4 ep 2
[30727.990266] xhci_hcd 0000:39:00.0: // Ding dong!
[30727.991388] xhci_hcd 0000:39:00.0: Set up evaluate context for LPM MEL change.
[30727.991406] xhci_hcd 0000:39:00.0: // Ding dong!
[30727.991455] xhci_hcd 0000:39:00.0: Successful evaluate context command
[30727.991868] xhci_hcd 0000:39:00.0: Set up evaluate context for LPM MEL change.
[30727.991882] xhci_hcd 0000:39:00.0: // Ding dong!
[30727.991924] xhci_hcd 0000:39:00.0: Successful evaluate context command
[30727.992272] usb 4-1.1: adding 4-1.1:1.0 (config #1, interface 0)
[30727.992624] hub 4-1.1:1.0: usb_probe_interface
[30727.992650] hub 4-1.1:1.0: usb_probe_interface - got id
[30727.992664] hub 4-1.1:1.0: USB hub found
[30727.992868] hub 4-1.1:1.0: 4 ports detected
[30727.992882] hub 4-1.1:1.0: standalone hub
[30727.992890] hub 4-1.1:1.0: individual port power switching
[30727.992909] hub 4-1.1:1.0: individual port over-current protection
[30727.992917] hub 4-1.1:1.0: TT requires at most 8 FS bit times (666 ns)
[30727.992928] hub 4-1.1:1.0: power on to power good time: 350ms
[30727.993287] hub 4-1.1:1.0: local power source is good
[30728.004180] usb 4-1.1-port1: peered to 3-1.1-port1
[30728.004353] usb 4-1.1-port2: peered to 3-1.1-port2
[30728.004477] usb 4-1.1-port3: peered to 3-1.1-port3
[30728.004603] usb 4-1.1-port4: peered to 3-1.1-port4
[30728.004632] xhci_hcd 0000:39:00.0: xHCI version 110 needs hub TT think time and number of ports
[30728.004656] xhci_hcd 0000:39:00.0: Set up configure endpoint for hub device.
[30728.004674] xhci_hcd 0000:39:00.0: // Ding dong!
[30728.005047] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command
[30728.105848] hub 4-1.1:1.0: enabling power on all ports
[30728.112022] usb 4-1-port4: status 0203, change 0000, 5.0 Gb/s
[30728.112082] xhci_hcd 0000:39:00.0: // Ding dong!
[30728.112170] xhci_hcd 0000:39:00.0: Slot 5 output ctx = 0x0x00000001a3010000 (dma)
[30728.112198] xhci_hcd 0000:39:00.0: Slot 5 input ctx = 0x0x0000000166d26000 (dma)
[30728.112237] xhci_hcd 0000:39:00.0: Set slot id 5 dcbaa entry 000000001d652769 to 0x1a3010000
[30728.184311] xhci_hcd 0000:39:00.0: Slot ID 5: HW portnum 2, hcd portnum 0
[30728.184342] xhci_hcd 0000:39:00.0: udev->tt = 0000000000000000
[30728.184351] xhci_hcd 0000:39:00.0: udev->ttport = 0x0
[30728.184363] xhci_hcd 0000:39:00.0: // Ding dong!
[30728.184443] xhci_hcd 0000:39:00.0: Successful setup address command
[30728.184454] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x00000106e0a000
[30728.184474] xhci_hcd 0000:39:00.0: Slot ID 5 dcbaa entry @000000001d652769 = 0x000001a3010000
[30728.184484] xhci_hcd 0000:39:00.0: Output Context DMA address = 0x1a3010000
[30728.184491] xhci_hcd 0000:39:00.0: Internal device address = 5
[30728.184516] usb 4-1.4: new SuperSpeed USB device number 4 using xhci_hcd
[30728.202489] usb 4-1.4: skipped 1 descriptor after endpoint
[30728.202522] usb 4-1.4: skipped 1 descriptor after endpoint
[30728.202694] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30728.202770] usb 4-1.4: default language 0x0409
[30728.203113] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30728.203380] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30728.203704] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30728.203784] usb 4-1.4: udev 4, busnum 4, minor = 387
[30728.203807] usb 4-1.4: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00
[30728.203819] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[30728.203827] usb 4-1.4: Product: Mass Storage Device
[30728.203833] usb 4-1.4: Manufacturer: Generic
[30728.203850] usb 4-1.4: SerialNumber: 058F84688461
[30728.204619] usb 4-1.4: usb_probe_device
[30728.204653] usb 4-1.4: configuration #1 chosen from 1 choice
[30728.204731] xhci_hcd 0000:39:00.0: add ep 0x1, slot id 5, new drop flags = 0x0, new add flags = 0x4
[30728.204782] xhci_hcd 0000:39:00.0: add ep 0x82, slot id 5, new drop flags = 0x0, new add flags = 0x24
[30728.204798] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 0000000005095cdf
[30728.204840] xhci_hcd 0000:39:00.0: // Ding dong!
[30728.207845] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command
[30728.207937] xhci_hcd 0000:39:00.0: // Ding dong!
[30728.208017] xhci_hcd 0000:39:00.0: Stopped on No-op or Link TRB for slot 5 ep 1
[30728.208076] xhci_hcd 0000:39:00.0: // Ding dong!
[30728.208832] xhci_hcd 0000:39:00.0: // Ding dong!
[30728.208879] xhci_hcd 0000:39:00.0: Stopped on No-op or Link TRB for slot 5 ep 4
[30728.208915] xhci_hcd 0000:39:00.0: // Ding dong!
[30728.209841] xhci_hcd 0000:39:00.0: Set up evaluate context for LPM MEL change.
[30728.209874] xhci_hcd 0000:39:00.0: // Ding dong!
[30728.209927] xhci_hcd 0000:39:00.0: Successful evaluate context command
[30728.210419] xhci_hcd 0000:39:00.0: Set up evaluate context for LPM MEL change.
[30728.210438] xhci_hcd 0000:39:00.0: // Ding dong!
[30728.210476] xhci_hcd 0000:39:00.0: Successful evaluate context command
[30728.210940] usb 4-1.4: adding 4-1.4:1.0 (config #1, interface 0)
[30728.211245] usb-storage 4-1.4:1.0: usb_probe_interface
[30728.211263] usb-storage 4-1.4:1.0: usb_probe_interface - got id
[30728.211274] usb-storage 4-1.4:1.0: USB Mass Storage device detected
[30728.212318] scsi host0: usb-storage 4-1.4:1.0
[30728.212817] usb-storage 4-1.4:1.0: waiting for device to settle before scanning
[30728.216042] hub 4-1:1.0: state 7 ports 4 chg 0000 evt 0002
[30728.344726] usb 3-1.1-port3: status 0101 change 0001
[30728.448071] hub 3-1.1:1.0: state 7 ports 4 chg 0008 evt 0000
[30728.448385] usb 3-1.1-port3: status 0101, change 0000, 12 Mb/s
[30728.448580] usb 3-1.1-port3: indicator auto status 0
[30728.448617] xhci_hcd 0000:39:00.0: // Ding dong!
[30728.448676] xhci_hcd 0000:39:00.0: Slot 6 output ctx = 0x0x000000013b1fd000 (dma)
[30728.448707] xhci_hcd 0000:39:00.0: Slot 6 input ctx = 0x0x000000027706a000 (dma)
[30728.448730] xhci_hcd 0000:39:00.0: Set slot id 6 dcbaa entry 000000005cae5269 to 0x13b1fd000
[30728.524033] usb 3-1.1.3: new high-speed USB device number 4 using xhci_hcd
[30728.524075] xhci_hcd 0000:39:00.0: Slot ID 6: HW portnum 0, hcd portnum 0
[30728.524087] xhci_hcd 0000:39:00.0: udev->tt = 0000000000000000
[30728.524096] xhci_hcd 0000:39:00.0: udev->ttport = 0x0
[30728.524118] xhci_hcd 0000:39:00.0: // Ding dong!
[30728.524178] xhci_hcd 0000:39:00.0: Successful setup context command
[30728.524191] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x00000106e0a000
[30728.524211] xhci_hcd 0000:39:00.0: Slot ID 6 dcbaa entry @000000005cae5269 = 0x0000013b1fd000
[30728.524224] xhci_hcd 0000:39:00.0: Output Context DMA address = 0x13b1fd000
[30728.524234] xhci_hcd 0000:39:00.0: Internal device address = 0
[30728.524312] xhci_hcd 0000:39:00.0: Transfer error for slot 6 ep 0 on endpoint
[30728.524334] xhci_hcd 0000:39:00.0: TRB error 4, halted endpoint index = 0
[30728.524345] xhci_hcd 0000:39:00.0: Hard-reset ep 0, slot 6
[30728.524355] xhci_hcd 0000:39:00.0: // Ding dong!
[30728.524384] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30728.524393] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x3fe3cd000 (dma) in stream 0 URB 00000000b76b6ab2
[30728.524408] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x3fe3cd030, cycle 1
[30728.524428] xhci_hcd 0000:39:00.0: // Ding dong!
[30728.524437] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000b76b6ab2 TD as cancel_status is 2
[30728.524451] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @3fe3cd030
[30728.524471] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000b76b6ab2 TD
[30728.524481] xhci_hcd 0000:39:00.0: Giveback URB 00000000b76b6ab2, len = 0, expected = 64, status = -71
[30728.524507] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30728.524605] xhci_hcd 0000:39:00.0: Transfer error for slot 6 ep 0 on endpoint
[30728.524617] xhci_hcd 0000:39:00.0: TRB error 4, halted endpoint index = 0
[30728.524636] xhci_hcd 0000:39:00.0: Hard-reset ep 0, slot 6
[30728.524646] xhci_hcd 0000:39:00.0: // Ding dong!
[30728.524664] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30728.524682] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x3fe3cd030 (dma) in stream 0 URB 00000000b76b6ab2
[30728.524695] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x3fe3cd060, cycle 1
[30728.524702] xhci_hcd 0000:39:00.0: // Ding dong!
[30728.524710] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000b76b6ab2 TD as cancel_status is 2
[30728.524733] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @3fe3cd060
[30728.524741] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000b76b6ab2 TD
[30728.524750] xhci_hcd 0000:39:00.0: Giveback URB 00000000b76b6ab2, len = 0, expected = 64, status = -71
[30728.524772] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30728.524861] xhci_hcd 0000:39:00.0: Transfer error for slot 6 ep 0 on endpoint
[30728.524873] xhci_hcd 0000:39:00.0: TRB error 4, halted endpoint index = 0
[30728.524892] xhci_hcd 0000:39:00.0: Hard-reset ep 0, slot 6
[30728.524901] xhci_hcd 0000:39:00.0: // Ding dong!
[30728.524942] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30728.524950] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x3fe3cd060 (dma) in stream 0 URB 00000000b76b6ab2
[30728.524962] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x3fe3cd090, cycle 1
[30728.524981] xhci_hcd 0000:39:00.0: // Ding dong!
[30728.524988] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000b76b6ab2 TD as cancel_status is 2
[30728.525000] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @3fe3cd090
[30728.525008] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000b76b6ab2 TD
[30728.525025] xhci_hcd 0000:39:00.0: Giveback URB 00000000b76b6ab2, len = 0, expected = 64, status = -71
[30728.525038] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30728.544168] usb 3-1.1-port3: not reset yet, waiting 10ms
[30728.564118] usb 3-1.1-port3: not reset yet, waiting 10ms
[30728.576101] hub 4-1.1:1.0: state 7 ports 4 chg 0000 evt 0000
[30728.577086] hub 4-1.1:1.0: hub_suspend
[30728.577116] xhci_hcd 0000:39:00.0: Cancel URB 00000000b91b74e4, dev 1.1, ep 0x81, starting at offset 0x14e6b2000
[30728.577148] xhci_hcd 0000:39:00.0: // Ding dong!
[30728.577168] xhci_hcd 0000:39:00.0: Stopped on Transfer TRB for slot 4 ep 2
[30728.577178] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x14e6b2000 (dma) in stream 0 URB 00000000b91b74e4
[30728.577200] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x14e6b2010, cycle 1
[30728.577206] xhci_hcd 0000:39:00.0: // Ding dong!
[30728.577212] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000b91b74e4 TD as cancel_status is 2
[30728.577222] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @14e6b2010
[30728.577239] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000b91b74e4 TD
[30728.577245] xhci_hcd 0000:39:00.0: Giveback URB 00000000b91b74e4, len = 0, expected = 2, status = -115
[30728.577254] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30728.577753] usb 4-1.1: usb auto-suspend, wakeup 1
[30728.584290] usb 3-1.1-port3: not reset yet, waiting 200ms
[30728.788794] usb 3-1.1-port3: not reset yet, waiting 200ms
[30728.992466] usb 3-1.1-port3: not reset yet, waiting 200ms
[30729.196552] usb 3-1.1-port3: not reset yet, waiting 200ms
[30729.197548] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.198063] hub 3-1.1:1.0: state 7 ports 4 chg 0000 evt 0008
[30729.198772] usb 3-1.1-port3: status 0100, change 0001, 12 Mb/s
[30729.198991] usb 3-1.1-port3: indicator auto status 0
[30729.236246] usb-storage 4-1.4:1.0: starting scan
[30729.238690] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6
[30729.239927] xhci_hcd 0000:39:00.0: Giveback URB 00000000af653d05, len = 18, expected = 96, status = 0
[30729.240056] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.240078] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.240096] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.240122] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.240134] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0080 (dma) in stream 0 URB 0000000020351fd3
[30729.240156] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0090, cycle 1
[30729.240171] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.240183] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.240206] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0090
[30729.240221] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.240237] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.240259] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.240555] sd 0:0:0:0: [sda] Media removed, stopped polling
[30729.241310] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6
[30729.242025] usb-storage 4-1.4:1.0: scan complete
[30729.242875] xhci_hcd 0000:39:00.0: Giveback URB 00000000c0749efd, len = 18, expected = 96, status = 0
[30729.242915] sd 0:0:0:0: [sda] Attached SCSI removable disk
[30729.242943] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.242961] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.242977] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.243003] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.243016] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c00e0 (dma) in stream 0 URB 0000000020351fd3
[30729.243036] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c00f0, cycle 1
[30729.243049] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.243060] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.243079] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c00f0
[30729.243092] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.243107] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.243127] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.244126] sd 0:0:0:1: [sdb] Media removed, stopped polling
[30729.244398] xhci_hcd 0000:39:00.0: Giveback URB 00000000d2ca1738, len = 18, expected = 96, status = 0
[30729.244478] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.244491] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.244502] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.244520] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.244528] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0120 (dma) in stream 0 URB 0000000020351fd3
[30729.244540] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0130, cycle 1
[30729.244548] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.244555] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.244567] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0130
[30729.244576] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.244584] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.244596] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.247889] sd 0:0:0:1: [sdb] Attached SCSI removable disk
[30729.248400] xhci_hcd 0000:39:00.0: Giveback URB 00000000c892a191, len = 18, expected = 96, status = 0
[30729.248478] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.248495] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.248511] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.248534] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.248546] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0160 (dma) in stream 0 URB 0000000020351fd3
[30729.248568] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0170, cycle 1
[30729.248580] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.248590] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.248609] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0170
[30729.248622] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.248635] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.248655] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.264230] xhci_hcd 0000:39:00.0: Giveback URB 00000000c892a191, len = 18, expected = 96, status = 0
[30729.264308] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.264327] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.264342] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.264365] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.264376] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c01a0 (dma) in stream 0 URB 0000000020351fd3
[30729.264395] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c01b0, cycle 1
[30729.264407] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.264417] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.264435] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c01b0
[30729.264447] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.264460] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.264478] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.268300] xhci_hcd 0000:39:00.0: Giveback URB 00000000c892a191, len = 18, expected = 96, status = 0
[30729.268370] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.268386] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.268401] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.268422] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.268433] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c01e0 (dma) in stream 0 URB 0000000020351fd3
[30729.268451] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c01f0, cycle 1
[30729.268464] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.268474] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.268490] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c01f0
[30729.268502] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.268514] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.268532] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.268978] xhci_hcd 0000:39:00.0: Giveback URB 00000000de1f5537, len = 18, expected = 96, status = 0
[30729.269035] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.269048] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.269062] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.269083] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.269094] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0220 (dma) in stream 0 URB 0000000020351fd3
[30729.269109] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0230, cycle 1
[30729.269118] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.269128] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.269142] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0230
[30729.269152] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.269162] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.269177] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.271535] xhci_hcd 0000:39:00.0: Giveback URB 00000000de1f5537, len = 18, expected = 96, status = 0
[30729.271601] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.271615] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.271628] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.271649] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.271659] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0260 (dma) in stream 0 URB 0000000020351fd3
[30729.271674] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0270, cycle 1
[30729.271685] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.271694] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.271708] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0270
[30729.271719] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.271730] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.271744] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.292352] xhci_hcd 0000:39:00.0: Giveback URB 000000001c307a94, len = 18, expected = 96, status = 0
[30729.292430] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.292447] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.292463] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.292485] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.292495] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c02a0 (dma) in stream 0 URB 0000000020351fd3
[30729.292513] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c02b0, cycle 1
[30729.292524] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.292534] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.292551] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c02b0
[30729.292562] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.292574] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.292590] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.293109] xhci_hcd 0000:39:00.0: Giveback URB 000000000d949572, len = 18, expected = 96, status = 0
[30729.293173] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.293186] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.293200] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.293222] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.293231] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c02e0 (dma) in stream 0 URB 0000000020351fd3
[30729.293247] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c02f0, cycle 1
[30729.293257] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.293266] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.293279] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c02f0
[30729.293290] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.293301] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.293316] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.296352] xhci_hcd 0000:39:00.0: Giveback URB 000000000d949572, len = 18, expected = 96, status = 0
[30729.296425] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.296441] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.296456] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.296479] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.296490] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0320 (dma) in stream 0 URB 0000000020351fd3
[30729.296508] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0330, cycle 1
[30729.296518] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.296528] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.296544] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0330
[30729.296554] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.296565] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.296582] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.297058] xhci_hcd 0000:39:00.0: Giveback URB 000000003eab3d5a, len = 18, expected = 96, status = 0
[30729.297122] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.297135] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.297147] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.297169] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.297178] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0360 (dma) in stream 0 URB 0000000020351fd3
[30729.297193] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0370, cycle 1
[30729.297203] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.297212] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.297226] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0370
[30729.297237] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.297248] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.297264] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.303996] xhci_hcd 0000:39:00.0: Giveback URB 00000000015e2c6f, len = 18, expected = 96, status = 0
[30729.304075] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.304091] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.304107] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.304127] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.304137] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c03a0 (dma) in stream 0 URB 0000000020351fd3
[30729.304153] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c03b0, cycle 1
[30729.304163] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.304171] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.304186] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c03b0
[30729.304196] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.304205] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.304221] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.306400] xhci_hcd 0000:39:00.0: Giveback URB 00000000015e2c6f, len = 18, expected = 96, status = 0
[30729.306470] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.306485] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.306499] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.306520] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.306530] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c03e0 (dma) in stream 0 URB 0000000020351fd3
[30729.306548] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c03f0, cycle 1
[30729.306559] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.306569] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.306585] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c03f0
[30729.306596] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.306606] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.306622] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.307082] xhci_hcd 0000:39:00.0: Giveback URB 000000000d949572, len = 18, expected = 96, status = 0
[30729.307147] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.307161] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.307173] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.307194] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.307204] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0420 (dma) in stream 0 URB 0000000020351fd3
[30729.307220] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0430, cycle 1
[30729.307230] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.307239] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.307254] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0430
[30729.307264] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.307274] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.307289] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.307772] xhci_hcd 0000:39:00.0: Giveback URB 000000000d949572, len = 18, expected = 96, status = 0
[30729.307841] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.307855] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.307867] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.307888] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.307897] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0460 (dma) in stream 0 URB 0000000020351fd3
[30729.307913] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0470, cycle 1
[30729.307923] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.307933] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.307948] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0470
[30729.307958] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.307967] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.307981] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.328137] usb 3-1.1-port3: debounce total 100ms stable 100ms status 0x100
[30729.328186] hub 3-1.1:1.0: hub_suspend
[30729.328206] xhci_hcd 0000:39:00.0: Cancel URB 000000000f03686a, dev 1.1, ep 0x81, starting at offset 0x14ed6e030
[30729.328234] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.328259] xhci_hcd 0000:39:00.0: Stopped on Transfer TRB for slot 3 ep 2
[30729.328277] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x14ed6e030 (dma) in stream 0 URB 000000000f03686a
[30729.328296] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x14ed6e040, cycle 1
[30729.328307] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.328316] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 000000000f03686a TD as cancel_status is 2
[30729.328332] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @14ed6e040
[30729.328344] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 000000000f03686a TD
[30729.328355] xhci_hcd 0000:39:00.0: Giveback URB 000000000f03686a, len = 0, expected = 1, status = -115
[30729.328372] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.328574] usb 3-1.1: usb auto-suspend, wakeup 1
[30729.344045] hub 3-1:1.0: hub_suspend
[30729.344075] xhci_hcd 0000:39:00.0: Cancel URB 0000000066534d44, dev 1, ep 0x81, starting at offset 0x122e43000
[30729.344107] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.344142] xhci_hcd 0000:39:00.0: Stopped on Transfer TRB for slot 1 ep 2
[30729.344159] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x122e43000 (dma) in stream 0 URB 0000000066534d44
[30729.344178] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x122e43010, cycle 1
[30729.344189] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.344199] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000066534d44 TD as cancel_status is 2
[30729.344215] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @122e43010
[30729.344228] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000066534d44 TD
[30729.344241] xhci_hcd 0000:39:00.0: Giveback URB 0000000066534d44, len = 0, expected = 1, status = -115
[30729.344260] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.344498] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.344524] xhci_hcd 0000:39:00.0: Stopped on No-op or Link TRB for slot 1 ep 0
[30729.344554] xhci_hcd 0000:39:00.0: Set port 3-1 link state, portsc: 0xe03, write 0x10e61
[30729.360035] usb 3-1: usb auto-suspend, wakeup 1
[30729.376042] hub 3-0:1.0: hub_suspend
[30729.376107] usb usb3: bus auto-suspend, wakeup 1
[30729.376133] xhci_hcd 0000:39:00.0: xhci_hub_status_data: stopping usb3 port polling
[30729.385090] xhci_hcd 0000:39:00.0: Giveback URB 000000001e45e5c9, len = 18, expected = 96, status = 0
[30729.385164] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.385180] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.385196] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.385220] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.385231] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c04a0 (dma) in stream 0 URB 0000000020351fd3
[30729.385250] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c04b0, cycle 1
[30729.385263] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.385273] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.385291] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c04b0
[30729.385303] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.385316] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.385333] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.388164] xhci_hcd 0000:39:00.0: Giveback URB 000000001e45e5c9, len = 18, expected = 96, status = 0
[30729.388236] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.388250] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.388264] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.388285] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.388296] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c04e0 (dma) in stream 0 URB 0000000020351fd3
[30729.388314] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c04f0, cycle 1
[30729.388326] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.388336] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.388352] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c04f0
[30729.388364] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.388376] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.388392] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.399384] xhci_hcd 0000:39:00.0: Giveback URB 00000000ffaf46af, len = 18, expected = 96, status = 0
[30729.399452] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.399471] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.399487] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.399508] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.399518] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0520 (dma) in stream 0 URB 0000000020351fd3
[30729.399537] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0530, cycle 1
[30729.399547] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.399556] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.399573] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0530
[30729.399584] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.399596] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.399612] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.424219] xhci_hcd 0000:39:00.0: Giveback URB 00000000ffaf46af, len = 18, expected = 96, status = 0
[30729.424287] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.424304] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.424320] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.424344] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.424356] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0560 (dma) in stream 0 URB 0000000020351fd3
[30729.424375] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0570, cycle 1
[30729.424388] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.424399] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.424416] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0570
[30729.424429] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.424442] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.424459] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.430324] xhci_hcd 0000:39:00.0: Giveback URB 00000000ffaf46af, len = 18, expected = 96, status = 0
[30729.430385] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.430402] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.430418] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.430440] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.430451] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c05a0 (dma) in stream 0 URB 0000000020351fd3
[30729.430470] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c05b0, cycle 1
[30729.430482] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.430492] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.430509] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c05b0
[30729.430521] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.430534] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.430548] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.469339] xhci_hcd 0000:39:00.0: Giveback URB 00000000015e2c6f, len = 18, expected = 96, status = 0
[30729.469416] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.469434] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.469451] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.469474] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.469485] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c05e0 (dma) in stream 0 URB 0000000020351fd3
[30729.469503] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c05f0, cycle 1
[30729.469514] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.469523] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.469540] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c05f0
[30729.469552] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.469564] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.469580] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.481936] xhci_hcd 0000:39:00.0: Giveback URB 00000000ffaf46af, len = 18, expected = 96, status = 0
[30729.482006] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.482024] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.482039] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.482062] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.482073] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0620 (dma) in stream 0 URB 0000000020351fd3
[30729.482091] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0630, cycle 1
[30729.482102] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.482112] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.482128] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0630
[30729.482139] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.482151] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.482167] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.482944] xhci_hcd 0000:39:00.0: Giveback URB 00000000ffaf46af, len = 18, expected = 96, status = 0
[30729.483003] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.483016] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.483028] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.483050] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.483061] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0660 (dma) in stream 0 URB 0000000020351fd3
[30729.483078] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0670, cycle 1
[30729.483089] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.483099] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.483115] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0670
[30729.483127] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.483137] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.483153] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.496239] xhci_hcd 0000:39:00.0: Giveback URB 00000000ffaf46af, len = 18, expected = 96, status = 0
[30729.496314] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.496333] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.496349] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.496372] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.496384] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c06a0 (dma) in stream 0 URB 0000000020351fd3
[30729.496403] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c06b0, cycle 1
[30729.496414] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.496425] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.496443] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c06b0
[30729.496454] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.496465] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.496481] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.497321] xhci_hcd 0000:39:00.0: Giveback URB 00000000ffaf46af, len = 18, expected = 96, status = 0
[30729.497381] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.497393] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.497406] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.497428] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.497437] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c06e0 (dma) in stream 0 URB 0000000020351fd3
[30729.497452] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c06f0, cycle 1
[30729.497462] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.497472] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.497487] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c06f0
[30729.497499] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.497509] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.497524] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.506492] xhci_hcd 0000:39:00.0: Giveback URB 00000000015e2c6f, len = 18, expected = 96, status = 0
[30729.506543] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.506554] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.506564] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.506583] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.506589] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0720 (dma) in stream 0 URB 0000000020351fd3
[30729.506601] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0730, cycle 1
[30729.506607] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.506613] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.506622] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0730
[30729.506628] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.506635] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.506644] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.509543] xhci_hcd 0000:39:00.0: Giveback URB 00000000015e2c6f, len = 18, expected = 96, status = 0
[30729.509586] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.509594] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.509601] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.509626] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.509631] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0760 (dma) in stream 0 URB 0000000020351fd3
[30729.509640] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0770, cycle 1
[30729.509645] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.509650] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.509658] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0770
[30729.509663] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.509669] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.509676] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.520632] xhci_hcd 0000:39:00.0: Giveback URB 00000000015e2c6f, len = 18, expected = 96, status = 0
[30729.520668] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.520675] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.520681] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.520708] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.520712] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c07a0 (dma) in stream 0 URB 0000000020351fd3
[30729.520719] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c07b0, cycle 1
[30729.520722] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.520726] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.520732] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c07b0
[30729.520737] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.520740] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.520747] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.524340] xhci_hcd 0000:39:00.0: Giveback URB 00000000015e2c6f, len = 18, expected = 96, status = 0
[30729.524377] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.524384] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.524389] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.524417] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.524421] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c07e0 (dma) in stream 0 URB 0000000020351fd3
[30729.524428] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c07f0, cycle 1
[30729.524432] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.524436] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.524442] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c07f0
[30729.524446] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.524450] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.524456] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.525870] xhci_hcd 0000:39:00.0: Giveback URB 00000000015e2c6f, len = 18, expected = 96, status = 0
[30729.525908] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.525913] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.525917] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.525947] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.525951] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0820 (dma) in stream 0 URB 0000000020351fd3
[30729.525957] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0830, cycle 1
[30729.525960] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.525964] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.525987] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0830
[30729.525991] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.525994] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.525999] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.527112] xhci_hcd 0000:39:00.0: Giveback URB 00000000015e2c6f, len = 18, expected = 96, status = 0
[30729.527150] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.527155] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.527159] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.527191] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.527194] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0860 (dma) in stream 0 URB 0000000020351fd3
[30729.527199] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0870, cycle 1
[30729.527202] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.527206] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.527230] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0870
[30729.527234] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.527237] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.527242] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.591576] xhci_hcd 0000:39:00.0: Giveback URB 00000000015e2c6f, len = 18, expected = 96, status = 0
[30729.591601] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.591604] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.591607] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.591641] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.591643] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c08a0 (dma) in stream 0 URB 0000000020351fd3
[30729.591646] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c08b0, cycle 1
[30729.591648] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.591650] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.591681] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c08b0
[30729.591683] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.591684] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.591687] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.599755] xhci_hcd 0000:39:00.0: Giveback URB 00000000015e2c6f, len = 18, expected = 96, status = 0
[30729.599793] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.599796] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.599799] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.599834] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.599836] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c08e0 (dma) in stream 0 URB 0000000020351fd3
[30729.599839] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c08f0, cycle 1
[30729.599840] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.599843] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.599873] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c08f0
[30729.599875] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.599877] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.599879] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.617888] xhci_hcd 0000:39:00.0: Giveback URB 00000000cc06e0a3, len = 18, expected = 96, status = 0
[30729.617988] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.617993] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.617996] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.618008] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.618010] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0920 (dma) in stream 0 URB 0000000020351fd3
[30729.618013] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0930, cycle 1
[30729.618015] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.618018] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.618124] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0930
[30729.618128] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.618130] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.618134] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.622930] xhci_hcd 0000:39:00.0: Giveback URB 00000000cc06e0a3, len = 18, expected = 96, status = 0
[30729.623025] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.623028] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.623031] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.623046] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.623047] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0960 (dma) in stream 0 URB 0000000020351fd3
[30729.623050] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0970, cycle 1
[30729.623052] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.623055] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.623130] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0970
[30729.623132] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.623134] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.623137] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.631187] xhci_hcd 0000:39:00.0: Giveback URB 00000000cc06e0a3, len = 18, expected = 96, status = 0
[30729.631216] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.631221] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.631225] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.631257] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.631259] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c09a0 (dma) in stream 0 URB 0000000020351fd3
[30729.631264] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c09b0, cycle 1
[30729.631267] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.631270] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.631296] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c09b0
[30729.631299] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.631301] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.631305] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30729.649172] xhci_hcd 0000:39:00.0: Giveback URB 00000000cc06e0a3, len = 18, expected = 96, status = 0
[30729.649276] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30729.649281] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30729.649284] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.649296] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30729.649297] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c09e0 (dma) in stream 0 URB 0000000020351fd3
[30729.649301] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c09f0, cycle 1
[30729.649302] xhci_hcd 0000:39:00.0: // Ding dong!
[30729.649305] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30729.649394] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c09f0
[30729.649398] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30729.649401] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30729.649404] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30730.660566] xhci_hcd 0000:39:00.0: Port change event, 3-1, id 1, portsc: 0xc400fe3
[30730.660588] xhci_hcd 0000:39:00.0: resume root hub
[30730.660605] xhci_hcd 0000:39:00.0: port resume event for port 1
[30730.660614] xhci_hcd 0000:39:00.0: resume HS port 1
[30730.660637] usb usb3: usb wakeup-resume
[30730.660649] usb usb3: usb auto-resume
[30730.660669] hub 3-0:1.0: hub_resume
[30730.660685] xhci_hcd 0000:39:00.0: Get port status 3-1 read: 0xfe3, return 0x507
[30730.660721] usb usb3-port1: status 0507 change 0000
[30730.660734] xhci_hcd 0000:39:00.0: Get port status 3-2 read: 0x2a0, return 0x100
[30730.660760] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[30730.704130] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002
[30730.704165] xhci_hcd 0000:39:00.0: resume USB2 port 3-1
[30730.704179] xhci_hcd 0000:39:00.0: Set port 3-1 link state, portsc: 0xfe3, write 0x10e01
[30730.704198] xhci_hcd 0000:39:00.0: Port change event, 3-1, id 1, portsc: 0x400e03
[30730.704220] xhci_hcd 0000:39:00.0: Get port status 3-1 read: 0xfe3, return 0x40503
[30730.704259] xhci_hcd 0000:39:00.0: clear port1 suspend/resume change, portsc: 0xe03
[30730.720323] usb 3-1: usb wakeup-resume
[30730.720381] xhci_hcd 0000:39:00.0: Get port status 3-1 read: 0xe03, return 0x503
[30730.736028] usb 3-1: Waited 0ms for CONNECT
[30730.736053] usb 3-1: finish resume
[30730.737669] hub 3-1:1.0: hub_resume
[30730.737940] usb 3-1-port1: status 0507 change 0000
[30730.738681] usb 3-1-port5: status 0501 change 0001
[30730.840083] usb usb3-port1: resume, status 0
[30730.840123] hub 3-1:1.0: state 7 ports 5 chg 0020 evt 0000
[30730.840289] usb 3-1-port5: status 0501, change 0000, 480 Mb/s
[30730.840425] usb 3-1-port5: indicator auto status 0
[30730.840452] xhci_hcd 0000:39:00.0: // Ding dong!
[30730.840515] xhci_hcd 0000:39:00.0: Slot 7 output ctx = 0x0x000000013b1fd000 (dma)
[30730.840534] xhci_hcd 0000:39:00.0: Slot 7 input ctx = 0x0x000000027706a000 (dma)
[30730.840555] xhci_hcd 0000:39:00.0: Set slot id 7 dcbaa entry 00000000f2802a70 to 0x13b1fd000
[30730.903991] xhci_hcd 0000:39:00.0: xhci_hub_status_data: stopping usb3 port polling
[30730.912089] usb 3-1.5: new high-speed USB device number 5 using xhci_hcd
[30730.912120] xhci_hcd 0000:39:00.0: Slot ID 7: HW portnum 0, hcd portnum 0
[30730.912132] xhci_hcd 0000:39:00.0: udev->tt = 0000000000000000
[30730.912142] xhci_hcd 0000:39:00.0: udev->ttport = 0x0
[30730.912154] xhci_hcd 0000:39:00.0: // Ding dong!
[30730.912224] xhci_hcd 0000:39:00.0: Successful setup context command
[30730.912236] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x00000106e0a000
[30730.912246] xhci_hcd 0000:39:00.0: Slot ID 7 dcbaa entry @00000000f2802a70 = 0x0000013b1fd000
[30730.912258] xhci_hcd 0000:39:00.0: Output Context DMA address = 0x13b1fd000
[30730.912267] xhci_hcd 0000:39:00.0: Internal device address = 0
[30730.912443] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30730.984548] xhci_hcd 0000:39:00.0: Resetting device with slot ID 7
[30730.984578] xhci_hcd 0000:39:00.0: // Ding dong!
[30730.984625] xhci_hcd 0000:39:00.0: Completed reset device command.
[30730.984641] xhci_hcd 0000:39:00.0: Can't reset device (slot ID 7) in default state
[30730.984652] xhci_hcd 0000:39:00.0: Not freeing device rings.
[30730.984673] xhci_hcd 0000:39:00.0: // Ding dong!
[30730.984768] xhci_hcd 0000:39:00.0: Successful setup address command
[30730.984785] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x00000106e0a000
[30730.984798] xhci_hcd 0000:39:00.0: Slot ID 7 dcbaa entry @00000000f2802a70 = 0x0000013b1fd000
[30730.984812] xhci_hcd 0000:39:00.0: Output Context DMA address = 0x13b1fd000
[30730.984823] xhci_hcd 0000:39:00.0: Internal device address = 7
[30731.007281] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30731.007335] usb 3-1.5: default language 0x0409
[30731.007481] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30731.007612] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30731.007736] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30731.007773] usb 3-1.5: udev 5, busnum 3, minor = 260
[30731.007792] usb 3-1.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[30731.007812] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[30731.007826] usb 3-1.5: Product: USB Billboard Device
[30731.007839] usb 3-1.5: Manufacturer: VIA Labs, Inc.
[30731.007850] usb 3-1.5: SerialNumber: 0000000000000001
[30731.008489] usb 3-1.5: usb_probe_device
[30731.008508] usb 3-1.5: configuration #1 chosen from 1 choice
[30731.008529] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 00000000db7a0f72
[30731.008748] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30731.008789] usb 3-1.5: adding 3-1.5:1.0 (config #1, interface 0)
[30731.008979] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30731.509163] pci_bus 0000:02: Allocating resources
[30731.509211] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[30731.509233] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[30731.509246] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[30731.509263] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[30731.509279] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30731.509289] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30731.509298] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30731.509305] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30731.509325] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30731.509333] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30731.509341] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30731.509347] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30731.509356] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30731.509362] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30731.509376] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30731.509384] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30731.509392] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30731.509399] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30731.509406] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30731.509412] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30731.636929] xhci_hcd 0000:39:00.0: Giveback URB 00000000b3d845b8, len = 18, expected = 96, status = 0
[30731.637144] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30731.637167] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30731.637182] xhci_hcd 0000:39:00.0: // Ding dong!
[30731.637203] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30731.637211] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0a20 (dma) in stream 0 URB 0000000020351fd3
[30731.637227] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0a30, cycle 1
[30731.637236] xhci_hcd 0000:39:00.0: // Ding dong!
[30731.637244] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30731.637258] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0a30
[30731.637267] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30731.637276] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30731.637291] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30731.668931] xhci_hcd 0000:39:00.0: Giveback URB 00000000b3d845b8, len = 18, expected = 96, status = 0
[30731.669114] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30731.669130] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30731.669144] xhci_hcd 0000:39:00.0: // Ding dong!
[30731.669164] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30731.669172] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0a60 (dma) in stream 0 URB 0000000020351fd3
[30731.669187] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0a70, cycle 1
[30731.669196] xhci_hcd 0000:39:00.0: // Ding dong!
[30731.669203] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30731.669217] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0a70
[30731.669226] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30731.669235] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30731.669247] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30733.652743] xhci_hcd 0000:39:00.0: Giveback URB 00000000b2464c41, len = 18, expected = 96, status = 0
[30733.652850] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30733.652867] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30733.652880] xhci_hcd 0000:39:00.0: // Ding dong!
[30733.652900] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30733.652909] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0aa0 (dma) in stream 0 URB 0000000020351fd3
[30733.652925] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0ab0, cycle 1
[30733.652938] xhci_hcd 0000:39:00.0: // Ding dong!
[30733.652951] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30733.652970] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0ab0
[30733.652982] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30733.652993] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30733.653010] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30733.684989] xhci_hcd 0000:39:00.0: Giveback URB 00000000cc06e0a3, len = 18, expected = 96, status = 0
[30733.685176] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30733.685193] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30733.685207] xhci_hcd 0000:39:00.0: // Ding dong!
[30733.685227] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30733.685236] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0ae0 (dma) in stream 0 URB 0000000020351fd3
[30733.685251] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0af0, cycle 1
[30733.685260] xhci_hcd 0000:39:00.0: // Ding dong!
[30733.685267] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30733.685280] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0af0
[30733.685290] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30733.685298] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30733.685311] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30735.668936] xhci_hcd 0000:39:00.0: Giveback URB 00000000cc06e0a3, len = 18, expected = 96, status = 0
[30735.669057] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30735.669072] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30735.669085] xhci_hcd 0000:39:00.0: // Ding dong!
[30735.669127] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30735.669137] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0b20 (dma) in stream 0 URB 0000000020351fd3
[30735.669154] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0b30, cycle 1
[30735.669164] xhci_hcd 0000:39:00.0: // Ding dong!
[30735.669172] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30735.669186] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0b30
[30735.669195] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30735.669206] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30735.669219] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30735.700752] xhci_hcd 0000:39:00.0: Giveback URB 00000000391f54fc, len = 18, expected = 96, status = 0
[30735.700847] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30735.700861] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30735.700874] xhci_hcd 0000:39:00.0: // Ding dong!
[30735.700914] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30735.700924] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0b60 (dma) in stream 0 URB 0000000020351fd3
[30735.700939] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0b70, cycle 1
[30735.700948] xhci_hcd 0000:39:00.0: // Ding dong!
[30735.700956] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30735.700969] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0b70
[30735.700978] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30735.700987] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30735.700999] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30737.684307] xhci_hcd 0000:39:00.0: Giveback URB 00000000abe14a07, len = 18, expected = 96, status = 0
[30737.684384] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30737.684400] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30737.684414] xhci_hcd 0000:39:00.0: // Ding dong!
[30737.684435] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30737.684444] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0ba0 (dma) in stream 0 URB 0000000020351fd3
[30737.684459] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0bb0, cycle 1
[30737.684468] xhci_hcd 0000:39:00.0: // Ding dong!
[30737.684475] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30737.684488] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0bb0
[30737.684497] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30737.684506] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30737.684518] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30737.716390] xhci_hcd 0000:39:00.0: Giveback URB 00000000abe14a07, len = 18, expected = 96, status = 0
[30737.716481] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30737.716497] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30737.716510] xhci_hcd 0000:39:00.0: // Ding dong!
[30737.716533] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30737.716542] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0be0 (dma) in stream 0 URB 0000000020351fd3
[30737.716557] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0bf0, cycle 1
[30737.716566] xhci_hcd 0000:39:00.0: // Ding dong!
[30737.716573] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30737.716587] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0bf0
[30737.716596] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30737.716605] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30737.716618] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30739.700485] xhci_hcd 0000:39:00.0: Giveback URB 00000000f809542a, len = 18, expected = 96, status = 0
[30739.700583] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30739.700599] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30739.700612] xhci_hcd 0000:39:00.0: // Ding dong!
[30739.700635] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30739.700644] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0c20 (dma) in stream 0 URB 0000000020351fd3
[30739.700660] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0c30, cycle 1
[30739.700670] xhci_hcd 0000:39:00.0: // Ding dong!
[30739.700677] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30739.700691] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0c30
[30739.700700] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30739.700709] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30739.700723] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30739.732575] xhci_hcd 0000:39:00.0: Giveback URB 00000000f809542a, len = 18, expected = 96, status = 0
[30739.732667] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30739.732683] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30739.732697] xhci_hcd 0000:39:00.0: // Ding dong!
[30739.732721] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30739.732730] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0c60 (dma) in stream 0 URB 0000000020351fd3
[30739.732747] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0c70, cycle 1
[30739.732756] xhci_hcd 0000:39:00.0: // Ding dong!
[30739.732764] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30739.732778] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0c70
[30739.732787] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30739.732797] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30739.732811] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30741.716385] xhci_hcd 0000:39:00.0: Giveback URB 00000000f809542a, len = 18, expected = 96, status = 0
[30741.716479] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30741.716492] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30741.716502] xhci_hcd 0000:39:00.0: // Ding dong!
[30741.716521] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30741.716527] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0ca0 (dma) in stream 0 URB 0000000020351fd3
[30741.716538] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0cb0, cycle 1
[30741.716544] xhci_hcd 0000:39:00.0: // Ding dong!
[30741.716550] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30741.716559] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0cb0
[30741.716566] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30741.716572] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30741.716581] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30741.748352] xhci_hcd 0000:39:00.0: Giveback URB 00000000f809542a, len = 18, expected = 96, status = 0
[30741.748445] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30741.748460] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30741.748470] xhci_hcd 0000:39:00.0: // Ding dong!
[30741.748488] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30741.748494] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0ce0 (dma) in stream 0 URB 0000000020351fd3
[30741.748505] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0cf0, cycle 1
[30741.748511] xhci_hcd 0000:39:00.0: // Ding dong!
[30741.748517] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30741.748527] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0cf0
[30741.748533] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30741.748539] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30741.748549] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30743.732585] xhci_hcd 0000:39:00.0: Giveback URB 00000000f809542a, len = 18, expected = 96, status = 0
[30743.732695] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30743.732712] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30743.732725] xhci_hcd 0000:39:00.0: // Ding dong!
[30743.732746] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30743.732755] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0d20 (dma) in stream 0 URB 0000000020351fd3
[30743.732770] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0d30, cycle 1
[30743.732779] xhci_hcd 0000:39:00.0: // Ding dong!
[30743.732786] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30743.732799] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0d30
[30743.732808] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30743.732817] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30743.732830] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30743.764500] xhci_hcd 0000:39:00.0: Giveback URB 00000000f809542a, len = 18, expected = 96, status = 0
[30743.764655] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30743.764677] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30743.764696] xhci_hcd 0000:39:00.0: // Ding dong!
[30743.764724] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30743.764738] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0d60 (dma) in stream 0 URB 0000000020351fd3
[30743.764762] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0d70, cycle 1
[30743.764778] xhci_hcd 0000:39:00.0: // Ding dong!
[30743.764793] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30743.764816] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0d70
[30743.764835] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30743.764851] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30743.764877] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30745.748182] xhci_hcd 0000:39:00.0: Giveback URB 000000009e85e227, len = 18, expected = 96, status = 0
[30745.748316] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30745.748328] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30745.748338] xhci_hcd 0000:39:00.0: // Ding dong!
[30745.748356] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30745.748362] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0da0 (dma) in stream 0 URB 0000000020351fd3
[30745.748372] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0db0, cycle 1
[30745.748379] xhci_hcd 0000:39:00.0: // Ding dong!
[30745.748384] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30745.748394] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0db0
[30745.748401] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30745.748407] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30745.748416] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30745.780184] xhci_hcd 0000:39:00.0: Giveback URB 000000009e85e227, len = 18, expected = 96, status = 0
[30745.780274] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30745.780291] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30745.780303] xhci_hcd 0000:39:00.0: // Ding dong!
[30745.780322] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30745.780328] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0de0 (dma) in stream 0 URB 0000000020351fd3
[30745.780341] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0df0, cycle 1
[30745.780348] xhci_hcd 0000:39:00.0: // Ding dong!
[30745.780354] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30745.780365] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0df0
[30745.780373] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30745.780380] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30745.780391] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30747.764532] xhci_hcd 0000:39:00.0: Giveback URB 00000000157f68c2, len = 18, expected = 96, status = 0
[30747.764640] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30747.764657] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30747.764669] xhci_hcd 0000:39:00.0: // Ding dong!
[30747.764690] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30747.764698] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0e20 (dma) in stream 0 URB 0000000020351fd3
[30747.764713] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0e30, cycle 1
[30747.764722] xhci_hcd 0000:39:00.0: // Ding dong!
[30747.764729] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30747.764742] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0e30
[30747.764751] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30747.764759] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30747.764772] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30747.796511] xhci_hcd 0000:39:00.0: Giveback URB 00000000157f68c2, len = 18, expected = 96, status = 0
[30747.796609] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30747.796626] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30747.796640] xhci_hcd 0000:39:00.0: // Ding dong!
[30747.796660] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30747.796668] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0e60 (dma) in stream 0 URB 0000000020351fd3
[30747.796682] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0e70, cycle 1
[30747.796691] xhci_hcd 0000:39:00.0: // Ding dong!
[30747.796698] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30747.796712] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0e70
[30747.796721] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30747.796730] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30747.796741] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30749.780416] xhci_hcd 0000:39:00.0: Giveback URB 00000000157f68c2, len = 18, expected = 96, status = 0
[30749.780520] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30749.780536] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30749.780549] xhci_hcd 0000:39:00.0: // Ding dong!
[30749.780570] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30749.780578] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0ea0 (dma) in stream 0 URB 0000000020351fd3
[30749.780592] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0eb0, cycle 1
[30749.780601] xhci_hcd 0000:39:00.0: // Ding dong!
[30749.780608] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30749.780621] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0eb0
[30749.780630] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30749.780639] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30749.780653] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30749.816148] xhci_hcd 0000:39:00.0: Giveback URB 00000000157f68c2, len = 18, expected = 96, status = 0
[30749.816218] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30749.816233] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30749.816247] xhci_hcd 0000:39:00.0: // Ding dong!
[30749.816267] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30749.816276] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0ee0 (dma) in stream 0 URB 0000000020351fd3
[30749.816291] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0ef0, cycle 1
[30749.816299] xhci_hcd 0000:39:00.0: // Ding dong!
[30749.816307] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30749.816320] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0ef0
[30749.816329] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30749.816338] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30749.816350] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30751.796305] xhci_hcd 0000:39:00.0: Giveback URB 00000000157f68c2, len = 18, expected = 96, status = 0
[30751.796406] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30751.796420] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30751.796432] xhci_hcd 0000:39:00.0: // Ding dong!
[30751.796467] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30751.796476] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0f20 (dma) in stream 0 URB 0000000020351fd3
[30751.796492] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0f30, cycle 1
[30751.796501] xhci_hcd 0000:39:00.0: // Ding dong!
[30751.796509] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30751.796522] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0f30
[30751.796532] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30751.796541] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30751.796555] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30751.828218] xhci_hcd 0000:39:00.0: Giveback URB 00000000a5566429, len = 18, expected = 96, status = 0
[30751.828300] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30751.828311] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30751.828321] xhci_hcd 0000:39:00.0: // Ding dong!
[30751.828356] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30751.828363] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0f60 (dma) in stream 0 URB 0000000020351fd3
[30751.828376] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0f70, cycle 1
[30751.828383] xhci_hcd 0000:39:00.0: // Ding dong!
[30751.828390] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30751.828401] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0f70
[30751.828408] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30751.828416] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30751.828426] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30753.812061] xhci_hcd 0000:39:00.0: Giveback URB 00000000707f1f90, len = 18, expected = 96, status = 0
[30753.812119] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30753.812132] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30753.812142] xhci_hcd 0000:39:00.0: // Ding dong!
[30753.812160] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30753.812167] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0fa0 (dma) in stream 0 URB 0000000020351fd3
[30753.812180] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0fb0, cycle 1
[30753.812188] xhci_hcd 0000:39:00.0: // Ding dong!
[30753.812194] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30753.812206] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0fb0
[30753.812214] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30753.812221] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30753.812231] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30753.844124] xhci_hcd 0000:39:00.0: Giveback URB 00000000707f1f90, len = 18, expected = 96, status = 0
[30753.844240] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30753.844260] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30753.844275] xhci_hcd 0000:39:00.0: // Ding dong!
[30753.844297] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30753.844308] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1016c0fe0 (dma) in stream 0 URB 0000000020351fd3
[30753.844327] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1016c0ff0, cycle 1
[30753.844340] xhci_hcd 0000:39:00.0: // Ding dong!
[30753.844350] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30753.844369] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1016c0ff0
[30753.844382] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30753.844395] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30753.844413] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30755.832213] xhci_hcd 0000:39:00.0: Giveback URB 00000000cf266899, len = 18, expected = 96, status = 0
[30755.832326] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30755.832338] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30755.832349] xhci_hcd 0000:39:00.0: // Ding dong!
[30755.832371] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30755.832378] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562030 (dma) in stream 0 URB 0000000020351fd3
[30755.832390] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562040, cycle 1
[30755.832397] xhci_hcd 0000:39:00.0: // Ding dong!
[30755.832403] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30755.832414] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562040
[30755.832422] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30755.832429] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30755.832439] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30755.860306] xhci_hcd 0000:39:00.0: Giveback URB 00000000cf266899, len = 18, expected = 96, status = 0
[30755.860407] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30755.860423] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30755.860438] xhci_hcd 0000:39:00.0: // Ding dong!
[30755.860464] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30755.860475] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562070 (dma) in stream 0 URB 0000000020351fd3
[30755.860492] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562080, cycle 1
[30755.860502] xhci_hcd 0000:39:00.0: // Ding dong!
[30755.860510] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30755.860526] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562080
[30755.860537] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30755.860548] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30755.860564] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30757.844120] xhci_hcd 0000:39:00.0: Giveback URB 00000000da68f555, len = 18, expected = 96, status = 0
[30757.844206] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30757.844221] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30757.844235] xhci_hcd 0000:39:00.0: // Ding dong!
[30757.844259] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30757.844270] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1795620b0 (dma) in stream 0 URB 0000000020351fd3
[30757.844286] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1795620c0, cycle 1
[30757.844295] xhci_hcd 0000:39:00.0: // Ding dong!
[30757.844304] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30757.844320] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1795620c0
[30757.844330] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30757.844340] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30757.844356] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30757.876239] xhci_hcd 0000:39:00.0: Giveback URB 00000000da68f555, len = 18, expected = 96, status = 0
[30757.876400] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30757.876418] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30757.876434] xhci_hcd 0000:39:00.0: // Ding dong!
[30757.876461] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30757.876472] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1795620f0 (dma) in stream 0 URB 0000000020351fd3
[30757.876491] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562100, cycle 1
[30757.876503] xhci_hcd 0000:39:00.0: // Ding dong!
[30757.876513] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30757.876531] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562100
[30757.876543] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30757.876555] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30757.876572] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30759.860089] xhci_hcd 0000:39:00.0: Giveback URB 000000004f265fa6, len = 18, expected = 96, status = 0
[30759.860165] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30759.860179] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30759.860190] xhci_hcd 0000:39:00.0: // Ding dong!
[30759.860211] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30759.860219] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562130 (dma) in stream 0 URB 0000000020351fd3
[30759.860233] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562140, cycle 1
[30759.860242] xhci_hcd 0000:39:00.0: // Ding dong!
[30759.860249] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30759.860262] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562140
[30759.860271] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30759.860281] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30759.860295] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30759.892056] xhci_hcd 0000:39:00.0: Giveback URB 000000004f265fa6, len = 18, expected = 96, status = 0
[30759.892127] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30759.892141] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30759.892153] xhci_hcd 0000:39:00.0: // Ding dong!
[30759.892175] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30759.892184] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562170 (dma) in stream 0 URB 0000000020351fd3
[30759.892199] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562180, cycle 1
[30759.892208] xhci_hcd 0000:39:00.0: // Ding dong!
[30759.892217] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30759.892231] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562180
[30759.892241] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30759.892251] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30759.892266] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30761.876199] xhci_hcd 0000:39:00.0: Giveback URB 00000000c0e8217f, len = 18, expected = 96, status = 0
[30761.876264] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30761.876277] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30761.876288] xhci_hcd 0000:39:00.0: // Ding dong!
[30761.876307] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30761.876314] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1795621b0 (dma) in stream 0 URB 0000000020351fd3
[30761.876327] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1795621c0, cycle 1
[30761.876334] xhci_hcd 0000:39:00.0: // Ding dong!
[30761.876340] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30761.876351] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1795621c0
[30761.876359] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30761.876366] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30761.876376] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30761.908214] xhci_hcd 0000:39:00.0: Giveback URB 00000000d48c33a3, len = 18, expected = 96, status = 0
[30761.908319] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30761.908332] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30761.908343] xhci_hcd 0000:39:00.0: // Ding dong!
[30761.908379] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30761.908386] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1795621f0 (dma) in stream 0 URB 0000000020351fd3
[30761.908400] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562200, cycle 1
[30761.908408] xhci_hcd 0000:39:00.0: // Ding dong!
[30761.908414] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30761.908426] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562200
[30761.908434] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30761.908442] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30761.908452] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30763.892097] xhci_hcd 0000:39:00.0: Giveback URB 00000000a2341831, len = 18, expected = 96, status = 0
[30763.892192] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30763.892212] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30763.892232] xhci_hcd 0000:39:00.0: // Ding dong!
[30763.892273] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30763.892287] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562230 (dma) in stream 0 URB 0000000020351fd3
[30763.892311] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562240, cycle 1
[30763.892326] xhci_hcd 0000:39:00.0: // Ding dong!
[30763.892338] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30763.892359] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562240
[30763.892374] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30763.892390] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30763.892410] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30763.924319] xhci_hcd 0000:39:00.0: Giveback URB 000000004f265fa6, len = 18, expected = 96, status = 0
[30763.924403] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30763.924420] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30763.924436] xhci_hcd 0000:39:00.0: // Ding dong!
[30763.924458] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30763.924473] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562270 (dma) in stream 0 URB 0000000020351fd3
[30763.924492] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562280, cycle 1
[30763.924504] xhci_hcd 0000:39:00.0: // Ding dong!
[30763.924515] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30763.924533] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562280
[30763.924546] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30763.924559] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30763.924576] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30765.908662] xhci_hcd 0000:39:00.0: Giveback URB 000000004f265fa6, len = 18, expected = 96, status = 0
[30765.908852] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30765.908874] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30765.908892] xhci_hcd 0000:39:00.0: // Ding dong!
[30765.908922] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30765.908935] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1795622b0 (dma) in stream 0 URB 0000000020351fd3
[30765.908958] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1795622c0, cycle 1
[30765.908971] xhci_hcd 0000:39:00.0: // Ding dong!
[30765.908983] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30765.909005] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1795622c0
[30765.909020] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30765.909034] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30765.909055] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30765.940639] xhci_hcd 0000:39:00.0: Giveback URB 000000004f265fa6, len = 18, expected = 96, status = 0
[30765.940820] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30765.940842] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30765.940859] xhci_hcd 0000:39:00.0: // Ding dong!
[30765.940889] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30765.940903] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1795622f0 (dma) in stream 0 URB 0000000020351fd3
[30765.940926] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562300, cycle 1
[30765.940939] xhci_hcd 0000:39:00.0: // Ding dong!
[30765.940951] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30765.940973] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562300
[30765.940987] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30765.941001] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30765.941023] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30767.924153] xhci_hcd 0000:39:00.0: Giveback URB 000000006d2122ff, len = 18, expected = 96, status = 0
[30767.924236] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30767.924249] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30767.924259] xhci_hcd 0000:39:00.0: // Ding dong!
[30767.924294] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30767.924302] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562330 (dma) in stream 0 URB 0000000020351fd3
[30767.924315] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562340, cycle 1
[30767.924322] xhci_hcd 0000:39:00.0: // Ding dong!
[30767.924329] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30767.924340] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562340
[30767.924348] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30767.924356] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30767.924366] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30767.956131] xhci_hcd 0000:39:00.0: Giveback URB 000000006d2122ff, len = 18, expected = 96, status = 0
[30767.956233] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30767.956248] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30767.956263] xhci_hcd 0000:39:00.0: // Ding dong!
[30767.956305] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30767.956316] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562370 (dma) in stream 0 URB 0000000020351fd3
[30767.956333] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562380, cycle 1
[30767.956342] xhci_hcd 0000:39:00.0: // Ding dong!
[30767.956351] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30767.956368] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562380
[30767.956378] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30767.956390] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30767.956405] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30769.939974] xhci_hcd 0000:39:00.0: Giveback URB 00000000af8e7104, len = 18, expected = 96, status = 0
[30769.940040] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30769.940053] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30769.940064] xhci_hcd 0000:39:00.0: // Ding dong!
[30769.940083] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30769.940090] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1795623b0 (dma) in stream 0 URB 0000000020351fd3
[30769.940103] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1795623c0, cycle 1
[30769.940110] xhci_hcd 0000:39:00.0: // Ding dong!
[30769.940116] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30769.940127] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1795623c0
[30769.940135] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30769.940142] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30769.940152] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30769.971958] xhci_hcd 0000:39:00.0: Giveback URB 00000000af8e7104, len = 18, expected = 96, status = 0
[30769.972021] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30769.972033] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30769.972045] xhci_hcd 0000:39:00.0: // Ding dong!
[30769.972064] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30769.972071] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1795623f0 (dma) in stream 0 URB 0000000020351fd3
[30769.972084] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562400, cycle 1
[30769.972091] xhci_hcd 0000:39:00.0: // Ding dong!
[30769.972098] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30769.972109] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562400
[30769.972117] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30769.972124] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30769.972134] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30771.956045] xhci_hcd 0000:39:00.0: Giveback URB 00000000dc7f3f8a, len = 18, expected = 96, status = 0
[30771.956153] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30771.956171] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30771.956188] xhci_hcd 0000:39:00.0: // Ding dong!
[30771.956209] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30771.956219] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562430 (dma) in stream 0 URB 0000000020351fd3
[30771.956235] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562440, cycle 1
[30771.956244] xhci_hcd 0000:39:00.0: // Ding dong!
[30771.956253] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30771.956268] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562440
[30771.956278] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30771.956288] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30771.956304] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30771.988000] xhci_hcd 0000:39:00.0: Giveback URB 000000001c8d1e78, len = 18, expected = 96, status = 0
[30771.988078] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30771.988089] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30771.988099] xhci_hcd 0000:39:00.0: // Ding dong!
[30771.988132] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30771.988139] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562470 (dma) in stream 0 URB 0000000020351fd3
[30771.988151] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562480, cycle 1
[30771.988159] xhci_hcd 0000:39:00.0: // Ding dong!
[30771.988165] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30771.988176] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562480
[30771.988183] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30771.988191] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30771.988200] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30773.972372] xhci_hcd 0000:39:00.0: Giveback URB 00000000a2341831, len = 18, expected = 96, status = 0
[30773.972467] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30773.972482] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30773.972494] xhci_hcd 0000:39:00.0: // Ding dong!
[30773.972533] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30773.972542] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1795624b0 (dma) in stream 0 URB 0000000020351fd3
[30773.972557] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1795624c0, cycle 1
[30773.972566] xhci_hcd 0000:39:00.0: // Ding dong!
[30773.972573] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30773.972587] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1795624c0
[30773.972596] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30773.972605] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30773.972617] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30774.004306] xhci_hcd 0000:39:00.0: Giveback URB 00000000a2341831, len = 18, expected = 96, status = 0
[30774.004409] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30774.004423] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30774.004436] xhci_hcd 0000:39:00.0: // Ding dong!
[30774.004459] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30774.004469] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1795624f0 (dma) in stream 0 URB 0000000020351fd3
[30774.004484] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562500, cycle 1
[30774.004493] xhci_hcd 0000:39:00.0: // Ding dong!
[30774.004501] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30774.004516] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562500
[30774.004527] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30774.004537] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30774.004549] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30775.988113] xhci_hcd 0000:39:00.0: Giveback URB 00000000a2341831, len = 18, expected = 96, status = 0
[30775.988214] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30775.988226] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30775.988236] xhci_hcd 0000:39:00.0: // Ding dong!
[30775.988266] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30775.988273] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562530 (dma) in stream 0 URB 0000000020351fd3
[30775.988286] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562540, cycle 1
[30775.988293] xhci_hcd 0000:39:00.0: // Ding dong!
[30775.988299] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30775.988310] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562540
[30775.988318] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30775.988325] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30775.988335] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30776.019991] xhci_hcd 0000:39:00.0: Giveback URB 00000000a2341831, len = 18, expected = 96, status = 0
[30776.020038] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30776.020047] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30776.020055] xhci_hcd 0000:39:00.0: // Ding dong!
[30776.020077] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30776.020083] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562570 (dma) in stream 0 URB 0000000020351fd3
[30776.020093] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562580, cycle 1
[30776.020099] xhci_hcd 0000:39:00.0: // Ding dong!
[30776.020105] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30776.020114] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562580
[30776.020121] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30776.020127] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30776.020136] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30778.004259] xhci_hcd 0000:39:00.0: Giveback URB 00000000a87f615d, len = 18, expected = 96, status = 0
[30778.004355] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30778.004369] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30778.004382] xhci_hcd 0000:39:00.0: // Ding dong!
[30778.004422] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30778.004430] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1795625b0 (dma) in stream 0 URB 0000000020351fd3
[30778.004446] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1795625c0, cycle 1
[30778.004454] xhci_hcd 0000:39:00.0: // Ding dong!
[30778.004462] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30778.004475] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1795625c0
[30778.004484] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30778.004493] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30778.004505] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30778.036203] xhci_hcd 0000:39:00.0: Giveback URB 00000000a87f615d, len = 18, expected = 96, status = 0
[30778.036266] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30778.036279] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30778.036292] xhci_hcd 0000:39:00.0: // Ding dong!
[30778.036318] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30778.036326] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1795625f0 (dma) in stream 0 URB 0000000020351fd3
[30778.036340] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562600, cycle 1
[30778.036349] xhci_hcd 0000:39:00.0: // Ding dong!
[30778.036356] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30778.036369] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562600
[30778.036378] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30778.036388] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30778.036400] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30780.020014] xhci_hcd 0000:39:00.0: Giveback URB 000000006d2122ff, len = 18, expected = 96, status = 0
[30780.020086] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30780.020096] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30780.020105] xhci_hcd 0000:39:00.0: // Ding dong!
[30780.020137] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30780.020143] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562630 (dma) in stream 0 URB 0000000020351fd3
[30780.020154] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562640, cycle 1
[30780.020161] xhci_hcd 0000:39:00.0: // Ding dong!
[30780.020166] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30780.020176] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562640
[30780.020182] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30780.020189] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30780.020198] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30780.052014] xhci_hcd 0000:39:00.0: Giveback URB 000000006d2122ff, len = 18, expected = 96, status = 0
[30780.052082] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30780.052092] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30780.052101] xhci_hcd 0000:39:00.0: // Ding dong!
[30780.052130] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30780.052136] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562670 (dma) in stream 0 URB 0000000020351fd3
[30780.052147] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562680, cycle 1
[30780.052153] xhci_hcd 0000:39:00.0: // Ding dong!
[30780.052159] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30780.052168] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562680
[30780.052174] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30780.052181] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30780.052190] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30782.036073] xhci_hcd 0000:39:00.0: Giveback URB 000000008856682b, len = 18, expected = 96, status = 0
[30782.036146] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30782.036156] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30782.036166] xhci_hcd 0000:39:00.0: // Ding dong!
[30782.036196] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30782.036203] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1795626b0 (dma) in stream 0 URB 0000000020351fd3
[30782.036213] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1795626c0, cycle 1
[30782.036220] xhci_hcd 0000:39:00.0: // Ding dong!
[30782.036225] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30782.036235] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1795626c0
[30782.036242] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30782.036248] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30782.036257] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30782.067871] xhci_hcd 0000:39:00.0: Giveback URB 000000004c30af7a, len = 18, expected = 96, status = 0
[30782.067978] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30782.067995] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30782.068006] xhci_hcd 0000:39:00.0: // Ding dong!
[30782.068030] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30782.068038] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1795626f0 (dma) in stream 0 URB 0000000020351fd3
[30782.068050] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562700, cycle 1
[30782.068057] xhci_hcd 0000:39:00.0: // Ding dong!
[30782.068064] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30782.068075] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562700
[30782.068083] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30782.068090] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30782.068101] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30784.051943] xhci_hcd 0000:39:00.0: Giveback URB 00000000d48c33a3, len = 18, expected = 96, status = 0
[30784.052015] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30784.052025] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30784.052035] xhci_hcd 0000:39:00.0: // Ding dong!
[30784.052066] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30784.052072] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562730 (dma) in stream 0 URB 0000000020351fd3
[30784.052083] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562740, cycle 1
[30784.052089] xhci_hcd 0000:39:00.0: // Ding dong!
[30784.052095] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30784.052104] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562740
[30784.052111] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30784.052118] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30784.052127] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30784.083998] xhci_hcd 0000:39:00.0: Giveback URB 00000000d48c33a3, len = 18, expected = 96, status = 0
[30784.084096] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30784.084109] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30784.084121] xhci_hcd 0000:39:00.0: // Ding dong!
[30784.084142] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30784.084149] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562770 (dma) in stream 0 URB 0000000020351fd3
[30784.084161] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562780, cycle 1
[30784.084169] xhci_hcd 0000:39:00.0: // Ding dong!
[30784.084176] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30784.084187] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562780
[30784.084194] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30784.084202] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30784.084212] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30786.067957] xhci_hcd 0000:39:00.0: Giveback URB 00000000a2341831, len = 18, expected = 96, status = 0
[30786.068027] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30786.068038] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30786.068047] xhci_hcd 0000:39:00.0: // Ding dong!
[30786.068072] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30786.068078] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1795627b0 (dma) in stream 0 URB 0000000020351fd3
[30786.068089] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1795627c0, cycle 1
[30786.068095] xhci_hcd 0000:39:00.0: // Ding dong!
[30786.068101] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30786.068110] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1795627c0
[30786.068117] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30786.068123] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30786.068132] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30786.099942] xhci_hcd 0000:39:00.0: Giveback URB 00000000a2341831, len = 18, expected = 96, status = 0
[30786.100023] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30786.100034] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30786.100042] xhci_hcd 0000:39:00.0: // Ding dong!
[30786.100073] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30786.100079] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1795627f0 (dma) in stream 0 URB 0000000020351fd3
[30786.100089] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562800, cycle 1
[30786.100095] xhci_hcd 0000:39:00.0: // Ding dong!
[30786.100101] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30786.100110] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562800
[30786.100116] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30786.100123] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30786.100131] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30788.084125] xhci_hcd 0000:39:00.0: Giveback URB 00000000a2341831, len = 18, expected = 96, status = 0
[30788.084187] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30788.084201] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30788.084214] xhci_hcd 0000:39:00.0: // Ding dong!
[30788.084239] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30788.084247] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562830 (dma) in stream 0 URB 0000000020351fd3
[30788.084262] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562840, cycle 1
[30788.084270] xhci_hcd 0000:39:00.0: // Ding dong!
[30788.084278] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30788.084291] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562840
[30788.084300] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30788.084309] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30788.084320] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30788.115926] xhci_hcd 0000:39:00.0: Giveback URB 00000000a2341831, len = 18, expected = 96, status = 0
[30788.116029] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30788.116045] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30788.116057] xhci_hcd 0000:39:00.0: // Ding dong!
[30788.116080] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30788.116090] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562870 (dma) in stream 0 URB 0000000020351fd3
[30788.116107] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562880, cycle 1
[30788.116116] xhci_hcd 0000:39:00.0: // Ding dong!
[30788.116124] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30788.116138] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562880
[30788.116147] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30788.116158] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30788.116171] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30790.100218] xhci_hcd 0000:39:00.0: Giveback URB 000000005316dcb9, len = 18, expected = 96, status = 0
[30790.100296] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30790.100310] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30790.100323] xhci_hcd 0000:39:00.0: // Ding dong!
[30790.100356] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30790.100365] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1795628b0 (dma) in stream 0 URB 0000000020351fd3
[30790.100379] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1795628c0, cycle 1
[30790.100388] xhci_hcd 0000:39:00.0: // Ding dong!
[30790.100396] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30790.100408] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1795628c0
[30790.100418] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30790.100427] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30790.100439] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30790.132105] xhci_hcd 0000:39:00.0: Giveback URB 000000005316dcb9, len = 18, expected = 96, status = 0
[30790.132206] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30790.132221] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30790.132234] xhci_hcd 0000:39:00.0: // Ding dong!
[30790.132257] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30790.132267] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1795628f0 (dma) in stream 0 URB 0000000020351fd3
[30790.132284] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562900, cycle 1
[30790.132293] xhci_hcd 0000:39:00.0: // Ding dong!
[30790.132302] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30790.132316] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562900
[30790.132326] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30790.132336] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30790.132349] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30792.115939] xhci_hcd 0000:39:00.0: Giveback URB 000000002232a9e5, len = 18, expected = 96, status = 0
[30792.116017] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30792.116031] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30792.116044] xhci_hcd 0000:39:00.0: // Ding dong!
[30792.116076] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30792.116084] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562930 (dma) in stream 0 URB 0000000020351fd3
[30792.116100] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562940, cycle 1
[30792.116109] xhci_hcd 0000:39:00.0: // Ding dong!
[30792.116116] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30792.116128] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562940
[30792.116137] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30792.116146] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30792.116158] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30792.148121] xhci_hcd 0000:39:00.0: Giveback URB 000000002232a9e5, len = 18, expected = 96, status = 0
[30792.148183] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30792.148196] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30792.148209] xhci_hcd 0000:39:00.0: // Ding dong!
[30792.148234] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30792.148243] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562970 (dma) in stream 0 URB 0000000020351fd3
[30792.148258] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562980, cycle 1
[30792.148267] xhci_hcd 0000:39:00.0: // Ding dong!
[30792.148274] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30792.148287] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562980
[30792.148296] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30792.148304] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30792.148316] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30794.132037] xhci_hcd 0000:39:00.0: Giveback URB 000000008856682b, len = 18, expected = 96, status = 0
[30794.132110] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30794.132124] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30794.132137] xhci_hcd 0000:39:00.0: // Ding dong!
[30794.132170] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30794.132179] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1795629b0 (dma) in stream 0 URB 0000000020351fd3
[30794.132194] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x1795629c0, cycle 1
[30794.132203] xhci_hcd 0000:39:00.0: // Ding dong!
[30794.132210] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30794.132223] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @1795629c0
[30794.132232] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30794.132241] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30794.132252] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30794.164223] xhci_hcd 0000:39:00.0: Giveback URB 000000008856682b, len = 18, expected = 96, status = 0
[30794.164324] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30794.164337] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30794.164348] xhci_hcd 0000:39:00.0: // Ding dong!
[30794.164386] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30794.164394] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x1795629f0 (dma) in stream 0 URB 0000000020351fd3
[30794.164407] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562a00, cycle 1
[30794.164415] xhci_hcd 0000:39:00.0: // Ding dong!
[30794.164421] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30794.164433] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562a00
[30794.164442] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30794.164450] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30794.164461] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30796.148005] xhci_hcd 0000:39:00.0: Giveback URB 000000001c8d1e78, len = 18, expected = 96, status = 0
[30796.148085] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30796.148100] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30796.148112] xhci_hcd 0000:39:00.0: // Ding dong!
[30796.148145] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30796.148154] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562a30 (dma) in stream 0 URB 0000000020351fd3
[30796.148169] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562a40, cycle 1
[30796.148178] xhci_hcd 0000:39:00.0: // Ding dong!
[30796.148185] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30796.148198] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562a40
[30796.148207] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30796.148216] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30796.148228] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30796.180006] xhci_hcd 0000:39:00.0: Giveback URB 000000001c8d1e78, len = 18, expected = 96, status = 0
[30796.180075] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30796.180089] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30796.180101] xhci_hcd 0000:39:00.0: // Ding dong!
[30796.180130] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30796.180140] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562a70 (dma) in stream 0 URB 0000000020351fd3
[30796.180154] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562a80, cycle 1
[30796.180163] xhci_hcd 0000:39:00.0: // Ding dong!
[30796.180170] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30796.180183] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562a80
[30796.180193] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30796.180202] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30796.180214] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30798.164431] xhci_hcd 0000:39:00.0: Giveback URB 00000000dc7f3f8a, len = 18, expected = 96, status = 0
[30798.164554] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30798.164569] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30798.164583] xhci_hcd 0000:39:00.0: // Ding dong!
[30798.164624] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30798.164634] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562ab0 (dma) in stream 0 URB 0000000020351fd3
[30798.164651] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562ac0, cycle 1
[30798.164663] xhci_hcd 0000:39:00.0: // Ding dong!
[30798.164671] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30798.164686] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562ac0
[30798.164698] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30798.164707] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30798.164721] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30798.196029] xhci_hcd 0000:39:00.0: Giveback URB 000000001c8d1e78, len = 18, expected = 96, status = 0
[30798.196092] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30798.196104] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30798.196117] xhci_hcd 0000:39:00.0: // Ding dong!
[30798.196142] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30798.196151] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562af0 (dma) in stream 0 URB 0000000020351fd3
[30798.196166] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562b00, cycle 1
[30798.196175] xhci_hcd 0000:39:00.0: // Ding dong!
[30798.196182] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30798.196195] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562b00
[30798.196205] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30798.196214] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30798.196225] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30800.183759] xhci_hcd 0000:39:00.0: Giveback URB 00000000cef4071b, len = 18, expected = 96, status = 0
[30800.184080] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30800.184100] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30800.184115] xhci_hcd 0000:39:00.0: // Ding dong!
[30800.184156] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30800.184168] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562b30 (dma) in stream 0 URB 0000000020351fd3
[30800.184188] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562b40, cycle 1
[30800.184200] xhci_hcd 0000:39:00.0: // Ding dong!
[30800.184209] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30800.184225] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562b40
[30800.184237] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30800.184249] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30800.184267] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30800.211635] xhci_hcd 0000:39:00.0: Giveback URB 00000000cef4071b, len = 18, expected = 96, status = 0
[30800.211686] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30800.211696] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30800.211704] xhci_hcd 0000:39:00.0: // Ding dong!
[30800.211724] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30800.211730] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562b70 (dma) in stream 0 URB 0000000020351fd3
[30800.211741] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562b80, cycle 1
[30800.211747] xhci_hcd 0000:39:00.0: // Ding dong!
[30800.211752] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30800.211760] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562b80
[30800.211767] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30800.211773] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30800.211781] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30802.195825] xhci_hcd 0000:39:00.0: Giveback URB 00000000cef4071b, len = 18, expected = 96, status = 0
[30802.195910] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30802.195920] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30802.195930] xhci_hcd 0000:39:00.0: // Ding dong!
[30802.195956] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30802.195962] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562bb0 (dma) in stream 0 URB 0000000020351fd3
[30802.195973] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562bc0, cycle 1
[30802.195980] xhci_hcd 0000:39:00.0: // Ding dong!
[30802.195985] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30802.195995] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562bc0
[30802.196002] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30802.196008] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30802.196017] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30802.227807] xhci_hcd 0000:39:00.0: Giveback URB 00000000cef4071b, len = 18, expected = 96, status = 0
[30802.227889] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30802.227899] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30802.227908] xhci_hcd 0000:39:00.0: // Ding dong!
[30802.227939] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30802.227945] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562bf0 (dma) in stream 0 URB 0000000020351fd3
[30802.227956] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562c00, cycle 1
[30802.227962] xhci_hcd 0000:39:00.0: // Ding dong!
[30802.227968] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30802.227977] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562c00
[30802.227984] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30802.227990] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30802.227999] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30804.211777] xhci_hcd 0000:39:00.0: Giveback URB 00000000661d7d6b, len = 18, expected = 96, status = 0
[30804.211849] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30804.211860] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30804.211869] xhci_hcd 0000:39:00.0: // Ding dong!
[30804.211899] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30804.211906] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562c30 (dma) in stream 0 URB 0000000020351fd3
[30804.211917] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562c40, cycle 1
[30804.211924] xhci_hcd 0000:39:00.0: // Ding dong!
[30804.211929] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30804.211939] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562c40
[30804.211945] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30804.211952] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30804.211961] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30804.243722] xhci_hcd 0000:39:00.0: Giveback URB 00000000661d7d6b, len = 18, expected = 96, status = 0
[30804.243791] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30804.243801] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30804.243810] xhci_hcd 0000:39:00.0: // Ding dong!
[30804.243830] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30804.243836] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562c70 (dma) in stream 0 URB 0000000020351fd3
[30804.243848] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562c80, cycle 1
[30804.243854] xhci_hcd 0000:39:00.0: // Ding dong!
[30804.243860] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30804.243869] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562c80
[30804.243876] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30804.243882] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30804.243892] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30806.228051] xhci_hcd 0000:39:00.0: Giveback URB 00000000de0a5ea1, len = 18, expected = 96, status = 0
[30806.228151] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30806.228165] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30806.228177] xhci_hcd 0000:39:00.0: // Ding dong!
[30806.228198] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30806.228206] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562cb0 (dma) in stream 0 URB 0000000020351fd3
[30806.228219] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562cc0, cycle 1
[30806.228227] xhci_hcd 0000:39:00.0: // Ding dong!
[30806.228233] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30806.228246] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562cc0
[30806.228254] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30806.228262] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30806.228274] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30806.260170] xhci_hcd 0000:39:00.0: Giveback URB 00000000de0a5ea1, len = 18, expected = 96, status = 0
[30806.260344] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30806.260366] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30806.260379] xhci_hcd 0000:39:00.0: // Ding dong!
[30806.260404] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30806.260412] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562cf0 (dma) in stream 0 URB 0000000020351fd3
[30806.260427] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562d00, cycle 1
[30806.260436] xhci_hcd 0000:39:00.0: // Ding dong!
[30806.260443] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30806.260456] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562d00
[30806.260464] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30806.260473] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30806.260487] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30808.244317] xhci_hcd 0000:39:00.0: Giveback URB 00000000de0a5ea1, len = 18, expected = 96, status = 0
[30808.244552] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30808.244577] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30808.244592] xhci_hcd 0000:39:00.0: // Ding dong!
[30808.244619] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30808.244629] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562d30 (dma) in stream 0 URB 0000000020351fd3
[30808.244647] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562d40, cycle 1
[30808.244656] xhci_hcd 0000:39:00.0: // Ding dong!
[30808.244665] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30808.244681] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562d40
[30808.244692] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30808.244702] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30808.244719] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30808.276271] xhci_hcd 0000:39:00.0: Giveback URB 00000000de0a5ea1, len = 18, expected = 96, status = 0
[30808.276483] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30808.276505] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30808.276519] xhci_hcd 0000:39:00.0: // Ding dong!
[30808.276544] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30808.276553] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562d70 (dma) in stream 0 URB 0000000020351fd3
[30808.276569] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562d80, cycle 1
[30808.276577] xhci_hcd 0000:39:00.0: // Ding dong!
[30808.276584] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30808.276597] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562d80
[30808.276606] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30808.276614] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30808.276630] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30810.259492] xhci_hcd 0000:39:00.0: Giveback URB 00000000751d06ad, len = 18, expected = 96, status = 0
[30810.259529] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30810.259534] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30810.259539] xhci_hcd 0000:39:00.0: // Ding dong!
[30810.259569] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30810.259572] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562db0 (dma) in stream 0 URB 0000000020351fd3
[30810.259577] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562dc0, cycle 1
[30810.259580] xhci_hcd 0000:39:00.0: // Ding dong!
[30810.259584] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30810.259609] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562dc0
[30810.259612] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30810.259615] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30810.259619] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30810.291499] xhci_hcd 0000:39:00.0: Giveback URB 00000000751d06ad, len = 18, expected = 96, status = 0
[30810.292014] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30810.292021] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30810.292025] xhci_hcd 0000:39:00.0: // Ding dong!
[30810.292052] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30810.292056] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562df0 (dma) in stream 0 URB 0000000020351fd3
[30810.292061] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562e00, cycle 1
[30810.292064] xhci_hcd 0000:39:00.0: // Ding dong!
[30810.292068] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30810.292091] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562e00
[30810.292095] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30810.292098] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30810.292103] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30812.275711] xhci_hcd 0000:39:00.0: Giveback URB 00000000b1db0361, len = 18, expected = 96, status = 0
[30812.275804] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30812.275824] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30812.275841] xhci_hcd 0000:39:00.0: // Ding dong!
[30812.275864] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30812.275876] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562e30 (dma) in stream 0 URB 0000000020351fd3
[30812.275896] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562e40, cycle 1
[30812.275908] xhci_hcd 0000:39:00.0: // Ding dong!
[30812.275919] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30812.275939] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562e40
[30812.275954] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30812.275968] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30812.275989] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30812.307945] xhci_hcd 0000:39:00.0: Giveback URB 00000000b1db0361, len = 18, expected = 96, status = 0
[30812.308018] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 5 ep 4
[30812.308031] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 5
[30812.308043] xhci_hcd 0000:39:00.0: // Ding dong!
[30812.308074] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30812.308083] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x179562e70 (dma) in stream 0 URB 0000000020351fd3
[30812.308097] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x179562e80, cycle 1
[30812.308106] xhci_hcd 0000:39:00.0: // Ding dong!
[30812.308113] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30812.308125] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @179562e80
[30812.308134] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30812.308142] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30812.308155] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30813.347850] PM: suspend entry (deep)
[30813.367027] Filesystems sync: 0.019 seconds
[30813.382737] Freezing user space processes
[30813.385884] Freezing user space processes completed (elapsed 0.003 seconds)
[30813.385900] OOM killer disabled.
[30813.385903] Freezing remaining freezable tasks
[30813.387784] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[30813.387924] printk: Suspending console(s) (use no_console_suspend to debug)
[30813.429271] usb 3-1.5: usb suspend, wakeup 0
[30813.429893] usb 1-3: usb suspend, wakeup 0
[30813.429894] xhci_hcd 0000:00:14.0: Get port status 1-4 read: 0x663, return 0x107
[30813.429954] xhci_hcd 0000:00:14.0: clear USB_PORT_FEAT_SUSPEND
[30813.429963] xhci_hcd 0000:00:14.0: PORTSC 0663
[30813.429965] usb 4-1.1: usb auto-resume
[30813.429975] xhci_hcd 0000:00:14.0: Set port 1-4 link state, portsc: 0x663, write 0x107e1
[30813.429997] usb 3-1.1: usb auto-resume
[30813.429998] xhci_hcd 0000:00:14.0: Port change event, 1-4, id 4, portsc: 0x4007e3
[30813.430009] xhci_hcd 0000:00:14.0: port resume event for port 4
[30813.430019] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling.
[30813.430470] usb usb2: usb auto-resume
[30813.430537] hub 2-0:1.0: hub_resume
[30813.448350] usb 4-1.4: usb suspend, wakeup 0
[30813.455282] xhci_hcd 0000:00:14.0: Get port status 2-1 read: 0x2a0, return 0x2a0
[30813.455781] xhci_hcd 0000:00:14.0: Get port status 2-2 read: 0x2a0, return 0x2a0
[30813.455806] xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2a0, return 0x2a0
[30813.455825] xhci_hcd 0000:00:14.0: Get port status 2-4 read: 0x2a0, return 0x2a0
[30813.455864] xhci_hcd 0000:00:14.0: Get port status 2-5 read: 0x2a0, return 0x2a0
[30813.455894] xhci_hcd 0000:00:14.0: Get port status 2-6 read: 0x2a0, return 0x2a0
[30813.455913] hub 2-0:1.0: hub_suspend
[30813.455932] usb usb2: bus suspend, wakeup 0
[30813.475381] xhci_hcd 0000:00:14.0: Set port 1-4 link state, portsc: 0x7e3, write 0x10601
[30813.475415] xhci_hcd 0000:00:14.0: Port change event, 1-4, id 4, portsc: 0x400603
[30813.475425] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling.
[30813.475492] usb 1-4: usb auto-resume
[30813.487445] usb 4-1.1: Waited 0ms for CONNECT
[30813.487445] usb 3-1.1: Waited 0ms for CONNECT
[30813.487463] usb 3-1.1: finish resume
[30813.487464] usb 4-1.1: finish resume
[30813.487774] hub 3-1.1:1.0: hub_resume
[30813.488284] hub 4-1.1:1.0: hub_resume
[30813.488627] hub 3-1.1:1.0: hub_suspend
[30813.488643] xhci_hcd 0000:39:00.0: Cancel URB 000000000f03686a, dev 1.1, ep 0x81, starting at offset 0x14ed6e040
[30813.488665] xhci_hcd 0000:39:00.0: // Ding dong!
[30813.488688] xhci_hcd 0000:39:00.0: Stopped on Transfer TRB for slot 3 ep 2
[30813.488698] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x14ed6e040 (dma) in stream 0 URB 000000000f03686a
[30813.488710] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x14ed6e050, cycle 1
[30813.488717] xhci_hcd 0000:39:00.0: // Ding dong!
[30813.488723] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 000000000f03686a TD as cancel_status is 2
[30813.488735] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @14ed6e050
[30813.488742] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 000000000f03686a TD
[30813.488748] xhci_hcd 0000:39:00.0: Giveback URB 000000000f03686a, len = 0, expected = 1, status = -115
[30813.488759] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30813.488783] usb 3-1.1: usb suspend, wakeup 0
[30813.488845] hub 3-1:1.0: hub_suspend
[30813.488863] xhci_hcd 0000:39:00.0: Cancel URB 0000000066534d44, dev 1, ep 0x81, starting at offset 0x122e43010
[30813.488880] xhci_hcd 0000:39:00.0: // Ding dong!
[30813.488904] xhci_hcd 0000:39:00.0: Stopped on Transfer TRB for slot 1 ep 2
[30813.488915] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x122e43010 (dma) in stream 0 URB 0000000066534d44
[30813.488925] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x122e43020, cycle 1
[30813.488930] xhci_hcd 0000:39:00.0: // Ding dong!
[30813.488936] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000066534d44 TD as cancel_status is 2
[30813.488946] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @122e43020
[30813.488951] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000066534d44 TD
[30813.488957] xhci_hcd 0000:39:00.0: Giveback URB 0000000066534d44, len = 0, expected = 1, status = -115
[30813.488966] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30813.489001] usb 3-1: usb suspend, wakeup 0
[30813.489113] hub 3-0:1.0: hub_suspend
[30813.489154] usb usb3: bus suspend, wakeup 0
[30813.489168] xhci_hcd 0000:39:00.0: port 3-1 not suspended
[30813.489183] xhci_hcd 0000:39:00.0: // Ding dong!
[30813.489256] xhci_hcd 0000:39:00.0: Stopped on No-op or Link TRB for slot 1 ep 0
[30813.512359] usb 4-1.1-port3: status 0203 change 0001
[30813.519489] xhci_hcd 0000:00:14.0: Get port status 1-4 read: 0x603, return 0x40103
[30813.519555] xhci_hcd 0000:00:14.0: clear port4 suspend/resume change, portsc: 0x603
[30813.535488] usb 1-4: Waited 0ms for CONNECT
[30813.535510] usb 1-4: finish resume
[30813.536403] xhci_hcd 0000:00:14.0: Cancel URB 00000000da0fed81, dev 4, ep 0x81, starting at offset 0x11e2c4020
[30813.536432] xhci_hcd 0000:00:14.0: // Ding dong!
[30813.536453] xhci_hcd 0000:00:14.0: Stopped on Transfer TRB for slot 2 ep 2
[30813.536464] xhci_hcd 0000:00:14.0: Removing canceled TD starting at 0x11e2c4020 (dma) in stream 0 URB 00000000da0fed81
[30813.536475] xhci_hcd 0000:00:14.0: Set TR Deq ptr 0x11e2c4030, cycle 1
[30813.536483] xhci_hcd 0000:00:14.0: // Ding dong!
[30813.536488] xhci_hcd 0000:00:14.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000da0fed81 TD as cancel_status is 2
[30813.536499] xhci_hcd 0000:00:14.0: Successful Set TR Deq Ptr cmd, deq = @11e2c4030
[30813.536505] xhci_hcd 0000:00:14.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000da0fed81 TD
[30813.536512] xhci_hcd 0000:00:14.0: Giveback URB 00000000da0fed81, len = 0, expected = 116, status = -115
[30813.536522] xhci_hcd 0000:00:14.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30813.536545] usb 1-4: usb suspend, wakeup 0
[30813.536666] hub 1-0:1.0: hub_suspend
[30813.536717] usb usb1: bus suspend, wakeup 0
[30813.536737] xhci_hcd 0000:00:14.0: port 1-4 not suspended
[30813.536745] xhci_hcd 0000:00:14.0: port 1-3 not suspended
[30813.536761] xhci_hcd 0000:00:14.0: // Ding dong!
[30813.536828] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 2 ep 3
[30813.536849] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 2 ep 0
[30813.536943] xhci_hcd 0000:00:14.0: // Ding dong!
[30813.537018] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 1 ep 6
[30813.537038] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 1 ep 5
[30813.537046] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 1 ep 3
[30813.537052] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 1 ep 0
[30813.543639] xhci_hcd 0000:00:14.0: config port 2-1 wake bits, portsc: 0x2a0, write: 0x202a0
[30813.543661] xhci_hcd 0000:00:14.0: config port 2-2 wake bits, portsc: 0x2a0, write: 0x202a0
[30813.543671] xhci_hcd 0000:00:14.0: config port 2-3 wake bits, portsc: 0x2a0, write: 0x202a0
[30813.543679] xhci_hcd 0000:00:14.0: config port 2-4 wake bits, portsc: 0x2a0, write: 0x202a0
[30813.543686] xhci_hcd 0000:00:14.0: config port 2-5 wake bits, portsc: 0x2a0, write: 0x202a0
[30813.543693] xhci_hcd 0000:00:14.0: config port 2-6 wake bits, portsc: 0x2a0, write: 0x202a0
[30813.543700] xhci_hcd 0000:00:14.0: config port 1-1 wake bits, portsc: 0x2a0, write: 0x202a0
[30813.543707] xhci_hcd 0000:00:14.0: config port 1-2 wake bits, portsc: 0x2a0, write: 0x202a0
[30813.543717] xhci_hcd 0000:00:14.0: config port 1-6 wake bits, portsc: 0x2a0, write: 0x202a0
[30813.543723] xhci_hcd 0000:00:14.0: config port 1-7 wake bits, portsc: 0x2a0, write: 0x202a0
[30813.543731] xhci_hcd 0000:00:14.0: config port 1-8 wake bits, portsc: 0x2a0, write: 0x202a0
[30813.543738] xhci_hcd 0000:00:14.0: config port 1-9 wake bits, portsc: 0x2a0, write: 0x202a0
[30813.543745] xhci_hcd 0000:00:14.0: config port 1-10 wake bits, portsc: 0x2a0, write: 0x202a0
[30813.543753] xhci_hcd 0000:00:14.0: config port 1-11 wake bits, portsc: 0x2a0, write: 0x202a0
[30813.543759] xhci_hcd 0000:00:14.0: config port 1-12 wake bits, portsc: 0x2a0, write: 0x202a0
[30813.543764] xhci_hcd 0000:00:14.0: xhci_suspend: stopping usb1 port polling.
[30813.543780] xhci_hcd 0000:00:14.0: // Setting command ring address to 0x10560b001
[30813.615557] hub 4-1.1:1.0: hub_suspend
[30813.615579] xhci_hcd 0000:39:00.0: Cancel URB 00000000b91b74e4, dev 1.1, ep 0x81, starting at offset 0x14e6b2010
[30813.615602] xhci_hcd 0000:39:00.0: // Ding dong!
[30813.615684] xhci_hcd 0000:39:00.0: Stopped on Transfer TRB for slot 4 ep 2
[30813.615703] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x14e6b2010 (dma) in stream 0 URB 00000000b91b74e4
[30813.615719] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x14e6b2020, cycle 1
[30813.615727] xhci_hcd 0000:39:00.0: // Ding dong!
[30813.615733] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000b91b74e4 TD as cancel_status is 2
[30813.615748] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @14e6b2020
[30813.615755] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000b91b74e4 TD
[30813.615762] xhci_hcd 0000:39:00.0: Giveback URB 00000000b91b74e4, len = 0, expected = 2, status = -115
[30813.615775] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30813.616095] usb 4-1.1: usb suspend, wakeup 0
[30813.631640] hub 4-1:1.0: hub_suspend
[30813.631667] xhci_hcd 0000:39:00.0: Cancel URB 000000000337bcc1, dev 1, ep 0x81, starting at offset 0x166c14040
[30813.631692] xhci_hcd 0000:39:00.0: // Ding dong!
[30813.631724] xhci_hcd 0000:39:00.0: Stopped on Transfer TRB for slot 2 ep 2
[30813.631741] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x166c14040 (dma) in stream 0 URB 000000000337bcc1
[30813.631755] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x166c14050, cycle 1
[30813.631762] xhci_hcd 0000:39:00.0: // Ding dong!
[30813.631768] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 000000000337bcc1 TD as cancel_status is 2
[30813.631781] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @166c14050
[30813.631787] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 000000000337bcc1 TD
[30813.631794] xhci_hcd 0000:39:00.0: Giveback URB 000000000337bcc1, len = 0, expected = 2, status = -115
[30813.631807] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30813.631866] xhci_hcd 0000:39:00.0: // Ding dong!
[30813.631892] xhci_hcd 0000:39:00.0: Stopped on No-op or Link TRB for slot 2 ep 0
[30813.631922] xhci_hcd 0000:39:00.0: Set port 4-1 link state, portsc: 0x1243, write 0x11261
[30813.639534] usb 4-1: usb suspend, wakeup 0
[30813.659547] hub 4-0:1.0: hub_suspend
[30813.659605] usb usb4: bus suspend, wakeup 0
[30813.659728] xhci_hcd 0000:39:00.0: config port 4-2 wake bits, portsc: 0x2a0, write: 0x202a0
[30813.659752] xhci_hcd 0000:39:00.0: config port 3-2 wake bits, portsc: 0x2a0, write: 0x202a0
[30813.659762] xhci_hcd 0000:39:00.0: xhci_suspend: stopping usb3 port polling.
[30813.659781] xhci_hcd 0000:39:00.0: // Setting command ring address to 0x122784001
[30813.998496] xhci_hcd 0000:39:00.0: wakeup: 1
[30814.002433] ACPI: EC: interrupt blocked
[30814.006977] xhci_hcd 0000:00:14.0: wakeup: 1
[30814.010677] xhci_hcd 0000:39:00.0: --> PCI D3hot
[30814.030520] xhci_hcd 0000:00:14.0: --> PCI D3hot
[30814.031408] ACPI: PM: Preparing to enter system sleep state S3
[30814.042436] ACPI: EC: event blocked
[30814.042441] ACPI: EC: EC stopped
[30814.042443] ACPI: PM: Saving platform NVS memory
[30814.046029] Disabling non-boot CPUs ...
[30814.048240] smpboot: CPU 3 is now offline
[30814.053310] smpboot: CPU 2 is now offline
[30814.056580] smpboot: CPU 1 is now offline
[30814.063896] ACPI: PM: Low-level resume complete
[30814.063940] ACPI: EC: EC started
[30814.063940] ACPI: PM: Restoring platform NVS memory
[30814.065801] Enabling non-boot CPUs ...
[30814.065826] smpboot: Booting Node 0 Processor 1 APIC 0x2
[30814.066550] CPU1 is up
[30814.066565] smpboot: Booting Node 0 Processor 2 APIC 0x1
[30814.067323] CPU2 is up
[30814.067339] smpboot: Booting Node 0 Processor 3 APIC 0x3
[30814.068046] CPU3 is up
[30814.070880] ACPI: PM: Waking up from system sleep state S3
[30814.386631] ACPI: EC: interrupt unblocked
[30814.406101] ACPI: EC: event unblocked
[30814.406205] xhci_hcd 0000:00:14.0: // Setting command ring address to 0x10560b001
[30814.406419] xhci_hcd 0000:00:14.0: xhci_resume: starting usb1 port polling.
[30814.406419] xhci_hcd 0000:00:14.0: Port change event, 1-3, id 3, portsc: 0x206e1
[30814.406438] xhci_hcd 0000:00:14.0: resume root hub
[30814.406444] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling.
[30814.406478] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb2 port polling
[30814.406652] xhci_hcd 0000:00:14.0: Port change event, 1-4, id 4, portsc: 0x206e1
[30814.406659] xhci_hcd 0000:00:14.0: resume root hub
[30814.406660] usb usb1: usb resume
[30814.406664] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling.
[30814.406706] xhci_hcd 0000:00:14.0: Port change event, 1-5, id 5, portsc: 0x206e1
[30814.406720] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling.
[30814.406810] usb usb2: usb resume
[30814.406850] hub 2-0:1.0: hub_resume
[30814.407188] xhci_hcd 0000:39:00.0: // Setting command ring address to 0x122784001
[30814.407450] xhci_hcd 0000:39:00.0: xHC error in resume, USBSTS 0x411, Reinit
[30814.407726] usb usb3: root hub lost power or was reset
[30814.408031] usb usb4: root hub lost power or was reset
[30814.408039] xhci_hcd 0000:39:00.0: Stop HCD
[30814.408043] xhci_hcd 0000:39:00.0: // Halt the HC
[30814.408060] xhci_hcd 0000:39:00.0: // Reset the HC
[30814.409060] xhci_hcd 0000:39:00.0: Wait for controller to be ready for doorbell rings
[30814.409792] xhci_hcd 0000:39:00.0: // Disabling event ring interrupts
[30814.409800] xhci_hcd 0000:39:00.0: cleaning up memory
[30814.410530] xhci_hcd 0000:39:00.0: Freed interrupters
[30814.410536] xhci_hcd 0000:39:00.0: Freed command ring
[30814.410779] xhci_hcd 0000:39:00.0: Freed segment pool
[30814.410788] xhci_hcd 0000:39:00.0: Freed device context pool
[30814.410790] xhci_hcd 0000:39:00.0: Freed small stream array pool
[30814.410792] xhci_hcd 0000:39:00.0: Freed medium stream array pool
[30814.410870] xhci_hcd 0000:39:00.0: xhci_stop completed - status = 1
[30814.410872] xhci_hcd 0000:39:00.0: Initialize the xhci_hcd
[30814.410875] xhci_hcd 0000:39:00.0: xhci_init
[30814.410885] xhci_hcd 0000:39:00.0: Supported page size register = 0x1
[30814.410888] xhci_hcd 0000:39:00.0: Supported page size of 8K
[30814.410890] xhci_hcd 0000:39:00.0: HCD page size set to 4K
[30814.410893] xhci_hcd 0000:39:00.0: // xHC can handle at most 64 device slots.
[30814.410896] xhci_hcd 0000:39:00.0: // Setting Max device slots reg = 0x40.
[30814.410901] xhci_hcd 0000:39:00.0: // Device context base array address = 0x0x0000000101652000 (DMA), 00000000ba4548ca (virt)
[30814.410910] xhci_hcd 0000:39:00.0: Allocated command ring at 00000000d7c62cf0
[30814.410913] xhci_hcd 0000:39:00.0: First segment DMA is 0x0x000000011c8e9000
[30814.410918] xhci_hcd 0000:39:00.0: // Setting command ring address to 0x000000011c8e9001
[30814.410930] xhci_hcd 0000:39:00.0: // Doorbell array is located at offset 0x3000 from cap regs base addr
[30814.410933] xhci_hcd 0000:39:00.0: Allocating primary event ring
[30814.410946] xhci_hcd 0000:39:00.0: // Write event ring dequeue pointer, preserving EHB bit
[30814.410949] xhci_hcd 0000:39:00.0: Allocating 34 scratchpad buffers
[30814.411013] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[30814.411020] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[30814.411038] xhci_hcd 0000:39:00.0: Ext Cap 00000000f7e53b7f, port offset = 1, count = 2, revision = 0x2
[30814.411044] xhci_hcd 0000:39:00.0: PSIV:1 PSIE:2 PLT:0 PFD:0 LP:0 PSIM:12
[30814.411056] xhci_hcd 0000:39:00.0: PSIV:2 PSIE:1 PLT:0 PFD:0 LP:0 PSIM:1500
[30814.411061] xhci_hcd 0000:39:00.0: PSIV:3 PSIE:2 PLT:0 PFD:0 LP:0 PSIM:480
[30814.411063] xhci_hcd 0000:39:00.0: xHCI 1.0: support USB2 hardware lpm
[30814.411098] xhci_hcd 0000:39:00.0: Ext Cap 00000000c2fe80fb, port offset = 3, count = 2, revision = 0x3
[30814.411104] xhci_hcd 0000:39:00.0: PSIV:4 PSIE:3 PLT:0 PFD:1 LP:0 PSIM:5
[30814.411108] xhci_hcd 0000:39:00.0: PSIV:5 PSIE:3 PLT:0 PFD:1 LP:0 PSIM:10
[30814.411110] xhci_hcd 0000:39:00.0: Found 2 USB 2.0 ports and 2 USB 3.0 ports.
[30814.411114] xhci_hcd 0000:39:00.0: Finished xhci_init
[30814.411117] xhci_hcd 0000:39:00.0: Start the primary HCD
[30814.411118] xhci_hcd 0000:39:00.0: xhci_run
[30814.411124] xhci_hcd 0000:39:00.0: ERST deq = 64'h1a14de000
[30814.411127] xhci_hcd 0000:39:00.0: Finished xhci_run for main hcd
[30814.411291] xhci_hcd 0000:39:00.0: Start the secondary HCD
[30814.411293] xhci_hcd 0000:39:00.0: Enable interrupts
[30814.411296] xhci_hcd 0000:39:00.0: Enable primary interrupter
[30814.411308] xhci_hcd 0000:39:00.0: // Turn on HC, cmd = 0x5.
[30814.411315] xhci_hcd 0000:39:00.0: xhci_resume: starting usb3 port polling.
[30814.411345] usb usb3: usb resume
[30814.411342] usb usb4: usb resume
[30814.411373] hub 4-0:1.0: hub_reset_resume
[30814.411409] usb usb4: port-1 no _DSM function 5
[30814.411413] usb usb4: port-1 disable U1/U2 _DSM: -19
[30814.411419] usb usb4: port-2 no _DSM function 5
[30814.411421] usb usb4: port-2 disable U1/U2 _DSM: -19
[30814.411423] hub 4-0:1.0: trying to enable port power on non-switchable hub
[30814.411438] xhci_hcd 0000:39:00.0: set port power 4-1 ON, portsc: 0x250
[30814.411461] xhci_hcd 0000:39:00.0: set port power 4-2 ON, portsc: 0x2a0
[30814.417713] hub 1-0:1.0: hub_resume
[30814.417722] xhci_hcd 0000:00:14.0: Get port status 1-1 read: 0x2a0, return 0x100
[30814.417735] xhci_hcd 0000:00:14.0: Get port status 1-2 read: 0x2a0, return 0x100
[30814.417748] xhci_hcd 0000:00:14.0: Get port status 1-3 read: 0x206e1, return 0x10101
[30814.417752] usb usb1-port3: status 0101 change 0001
[30814.417757] xhci_hcd 0000:00:14.0: clear port3 connect change, portsc: 0x6e1
[30814.417762] xhci_hcd 0000:00:14.0: Get port status 1-4 read: 0x206e1, return 0x10101
[30814.417765] usb usb1-port4: status 0101 change 0001
[30814.417769] xhci_hcd 0000:00:14.0: clear port4 connect change, portsc: 0x6e1
[30814.417774] xhci_hcd 0000:00:14.0: Get port status 1-5 read: 0x206e1, return 0x10101
[30814.417777] usb usb1-port5: status 0101 change 0001
[30814.417787] xhci_hcd 0000:00:14.0: clear port5 connect change, portsc: 0x6e1
[30814.417791] xhci_hcd 0000:00:14.0: Get port status 1-6 read: 0x2a0, return 0x100
[30814.417796] xhci_hcd 0000:00:14.0: Get port status 1-7 read: 0x2a0, return 0x100
[30814.417799] xhci_hcd 0000:00:14.0: Get port status 1-8 read: 0x2a0, return 0x100
[30814.417803] xhci_hcd 0000:00:14.0: Get port status 1-9 read: 0x2a0, return 0x100
[30814.417807] xhci_hcd 0000:00:14.0: Get port status 1-10 read: 0x2a0, return 0x100
[30814.417812] xhci_hcd 0000:00:14.0: Get port status 1-11 read: 0x2a0, return 0x100
[30814.417815] xhci_hcd 0000:00:14.0: Get port status 1-12 read: 0x2a0, return 0x100
[30814.420185] nvme nvme0: 4/0/0 default/read/poll queues
[30814.422425] hub 3-0:1.0: hub_reset_resume
[30814.422427] hub 3-0:1.0: trying to enable port power on non-switchable hub
[30814.422433] xhci_hcd 0000:39:00.0: set port power 3-1 ON, portsc: 0x2a0
[30814.422786] xhci_hcd 0000:39:00.0: set port power 3-2 ON, portsc: 0x2a0
[30814.429177] xhci_hcd 0000:39:00.0: Port change event, 3-1, id 1, portsc: 0x206e1
[30814.429181] xhci_hcd 0000:39:00.0: handle_port_status: starting usb3 port polling.
[30814.431415] xhci_hcd 0000:00:14.0: Get port status 2-1 read: 0x2a0, return 0x2a0
[30814.431430] xhci_hcd 0000:00:14.0: Get port status 2-2 read: 0x2a0, return 0x2a0
[30814.431436] xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2a0, return 0x2a0
[30814.431441] xhci_hcd 0000:00:14.0: Get port status 2-4 read: 0x2a0, return 0x2a0
[30814.431446] xhci_hcd 0000:00:14.0: Get port status 2-5 read: 0x2a0, return 0x2a0
[30814.431458] xhci_hcd 0000:00:14.0: Get port status 2-6 read: 0x2a0, return 0x2a0
[30814.473939] xhci_hcd 0000:39:00.0: Get port status 3-1 read: 0x206e1, return 0x10101
[30814.473956] usb usb3-port1: status 0101 change 0001
[30814.473963] xhci_hcd 0000:39:00.0: clear port1 connect change, portsc: 0x6e1
[30814.473969] xhci_hcd 0000:39:00.0: Get port status 3-2 read: 0x2a0, return 0x100
[30814.473978] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[30814.473980] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[30814.473981] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[30814.512380] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb1 port polling
[30814.513265] xhci_hcd 0000:39:00.0: Port change event, 4-1, id 3, portsc: 0x221203
[30814.513267] xhci_hcd 0000:39:00.0: handle_port_status: starting usb4 port polling.
[30814.515402] xhci_hcd 0000:39:00.0: Get port status 4-1 read: 0x221203, return 0x110203
[30814.515415] usb usb4-port1: status 0203 change 0011
[30814.515421] xhci_hcd 0000:39:00.0: clear port1 connect change, portsc: 0x201203
[30814.515428] xhci_hcd 0000:39:00.0: clear port1 reset change, portsc: 0x1203
[30814.515432] xhci_hcd 0000:39:00.0: Get port status 4-2 read: 0x2a0, return 0x2a0
[30814.519439] xhci_hcd 0000:00:14.0: Get port status 1-3 read: 0x6e1, return 0x101
[30814.519472] xhci_hcd 0000:00:14.0: Get port status 1-4 read: 0x6e1, return 0x101
[30814.519481] xhci_hcd 0000:00:14.0: Get port status 1-5 read: 0x6e1, return 0x101
[30814.523409] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb1 port polling
[30814.535397] usb 1-5: Waited 0ms for CONNECT
[30814.535400] usb 1-4: Waited 0ms for CONNECT
[30814.535400] usb 1-5: finish reset-resume
[30814.535402] usb 1-4: finish reset-resume
[30814.535402] usb 1-3: Waited 0ms for CONNECT
[30814.535404] usb 1-3: finish reset-resume
[30814.535412] xhci_hcd 0000:00:14.0: set port reset, actual port 1-3 status = 0x791
[30814.575880] xhci_hcd 0000:39:00.0: Get port status 3-1 read: 0x6e1, return 0x101
[30814.591392] usb 3-1: Waited 0ms for CONNECT
[30814.591395] usb 3-1: finish reset-resume
[30814.591408] xhci_hcd 0000:39:00.0: set port reset, actual port 3-1 status = 0x791
[30814.592856] xhci_hcd 0000:00:14.0: Port change event, 1-3, id 3, portsc: 0x200603
[30814.592859] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling.
[30814.599431] xhci_hcd 0000:00:14.0: Get port status 1-3 read: 0x200603, return 0x100103
[30814.599453] xhci_hcd 0000:00:14.0: clear port3 reset change, portsc: 0x603
[30814.619435] xhci_hcd 0000:39:00.0: Get port status 4-1 read: 0x1203, return 0x203
[30814.635426] usb 4-1: Waited 0ms for CONNECT
[30814.635429] usb 4-1: finish reset-resume
[30814.646537] xhci_hcd 0000:39:00.0: Port change event, 3-1, id 1, portsc: 0x200e03
[30814.646547] xhci_hcd 0000:39:00.0: handle_port_status: starting usb3 port polling.
[30814.655429] xhci_hcd 0000:00:14.0: Resetting device with slot ID 1
[30814.655434] xhci_hcd 0000:39:00.0: Get port status 3-1 read: 0x200e03, return 0x100503
[30814.655435] xhci_hcd 0000:00:14.0: // Ding dong!
[30814.655446] xhci_hcd 0000:39:00.0: clear port1 reset change, portsc: 0xe03
[30814.655601] xhci_hcd 0000:00:14.0: Completed reset device command.
[30814.655641] xhci_hcd 0000:00:14.0: Successful reset device command.
[30814.655706] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[30814.655709] xhci_hcd 0000:00:14.0: Slot already in default state
[30814.655786] xhci_hcd 0000:00:14.0: Waiting for status stage event
[30814.655871] xhci_hcd 0000:00:14.0: set port reset, actual port 1-3 status = 0x791
[30814.711428] xhci_hcd 0000:39:00.0: The device to be reset with slot ID 0 does not exist. Re-allocate the device
[30814.711432] xhci_hcd 0000:39:00.0: // Ding dong!
[30814.711501] xhci_hcd 0000:39:00.0: Slot 1 output ctx = 0x0x00000002bf5c9000 (dma)
[30814.711505] xhci_hcd 0000:39:00.0: Slot 1 input ctx = 0x0x00000001b55ab000 (dma)
[30814.711509] xhci_hcd 0000:39:00.0: Set slot id 1 dcbaa entry 0000000063de9869 to 0x2bf5c9000
[30814.711549] usb 3-1: reset high-speed USB device number 2 using xhci_hcd
[30814.711551] xhci_hcd 0000:39:00.0: Slot ID 1: HW portnum 0, hcd portnum 0
[30814.711553] xhci_hcd 0000:39:00.0: udev->tt = 0000000000000000
[30814.711554] xhci_hcd 0000:39:00.0: udev->ttport = 0x0
[30814.711555] xhci_hcd 0000:39:00.0: // Ding dong!
[30814.711623] xhci_hcd 0000:39:00.0: Successful setup context command
[30814.711631] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x00000101652000
[30814.711632] xhci_hcd 0000:39:00.0: Slot ID 1 dcbaa entry @0000000063de9869 = 0x000002bf5c9000
[30814.711634] xhci_hcd 0000:39:00.0: Output Context DMA address = 0x2bf5c9000
[30814.711636] xhci_hcd 0000:39:00.0: Internal device address = 0
[30814.711796] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30814.711851] xhci_hcd 0000:39:00.0: set port reset, actual port 3-1 status = 0xf91
[30814.713167] xhci_hcd 0000:00:14.0: Port change event, 1-3, id 3, portsc: 0x200603
[30814.713170] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling.
[30814.719434] xhci_hcd 0000:00:14.0: Get port status 1-3 read: 0x200603, return 0x100103
[30814.719444] xhci_hcd 0000:00:14.0: clear port3 reset change, portsc: 0x603
[30814.735404] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb1 port polling
[30814.766880] xhci_hcd 0000:39:00.0: Port change event, 3-1, id 1, portsc: 0x200e03
[30814.766883] xhci_hcd 0000:39:00.0: handle_port_status: starting usb3 port polling.
[30814.775425] xhci_hcd 0000:00:14.0: Resetting device with slot ID 1
[30814.775427] xhci_hcd 0000:39:00.0: Get port status 3-1 read: 0x200e03, return 0x100503
[30814.775429] xhci_hcd 0000:00:14.0: // Ding dong!
[30814.775439] xhci_hcd 0000:00:14.0: Completed reset device command.
[30814.775443] xhci_hcd 0000:39:00.0: clear port1 reset change, portsc: 0xe03
[30814.775445] xhci_hcd 0000:00:14.0: Can't reset device (slot ID 1) in default state
[30814.775446] xhci_hcd 0000:00:14.0: Not freeing device rings.
[30814.775455] xhci_hcd 0000:00:14.0: // Ding dong!
[30814.775519] xhci_hcd 0000:00:14.0: Successful setup address command
[30814.775522] xhci_hcd 0000:00:14.0: Op regs DCBAA ptr = 0x00000105609000
[30814.775529] xhci_hcd 0000:00:14.0: Slot ID 1 dcbaa entry @00000000ad208c58 = 0x00000104f57000
[30814.775531] xhci_hcd 0000:00:14.0: Output Context DMA address = 0x104f57000
[30814.775532] xhci_hcd 0000:00:14.0: Internal device address = 1
[30814.791655] xhci_hcd 0000:00:14.0: set port reset, actual port 1-5 status = 0x791
[30814.791927] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 00000000a36966bd
[30814.791929] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 00000000a36966bd
[30814.791930] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 00000000a36966bd
[30814.791931] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 00000000a36966bd
[30814.791932] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 00000000a36966bd
[30814.791935] xhci_hcd 0000:00:14.0: add ep 0x81, slot id 1, new drop flags = 0x0, new add flags = 0x8
[30814.791937] xhci_hcd 0000:00:14.0: add ep 0x82, slot id 1, new drop flags = 0x0, new add flags = 0x28
[30814.791951] xhci_hcd 0000:00:14.0: add ep 0x2, slot id 1, new drop flags = 0x0, new add flags = 0x38
[30814.791953] xhci_hcd 0000:00:14.0: add ep 0x83, slot id 1, new drop flags = 0x0, new add flags = 0xb8
[30814.791955] xhci_hcd 0000:00:14.0: add ep 0x3, slot id 1, new drop flags = 0x0, new add flags = 0xf8
[30814.791957] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 00000000a36966bd
[30814.791958] xhci_hcd 0000:00:14.0: // Ding dong!
[30814.792144] xhci_hcd 0000:00:14.0: Successful Endpoint Configure command
[30814.792376] btusb 1-3:1.0: no reset_resume for driver btusb?
[30814.792378] btusb 1-3:1.1: no reset_resume for driver btusb?
[30814.792379] btusb 1-3:1.0: forced unbind
[30814.831426] xhci_hcd 0000:39:00.0: Resetting device with slot ID 1
[30814.831429] xhci_hcd 0000:39:00.0: // Ding dong!
[30814.831436] xhci_hcd 0000:39:00.0: Completed reset device command.
[30814.831439] xhci_hcd 0000:39:00.0: Can't reset device (slot ID 1) in default state
[30814.831440] xhci_hcd 0000:39:00.0: Not freeing device rings.
[30814.831443] xhci_hcd 0000:39:00.0: // Ding dong!
[30814.831551] xhci_hcd 0000:39:00.0: Successful setup address command
[30814.831555] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x00000101652000
[30814.831557] xhci_hcd 0000:39:00.0: Slot ID 1 dcbaa entry @0000000063de9869 = 0x000002bf5c9000
[30814.831558] xhci_hcd 0000:39:00.0: Output Context DMA address = 0x2bf5c9000
[30814.831559] xhci_hcd 0000:39:00.0: Internal device address = 1
[30814.848079] xhci_hcd 0000:39:00.0: Get port status 4-1 read: 0x1203, return 0x203
[30814.848091] xhci_hcd 0000:39:00.0: set port reset, actual port 4-1 status = 0x1311
[30814.848551] xhci_hcd 0000:39:00.0: Port change event, 4-1, id 3, portsc: 0x201203
[30814.848553] xhci_hcd 0000:39:00.0: handle_port_status: starting usb4 port polling.
[30814.848922] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30814.848970] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 000000009182f890
[30814.848971] xhci_hcd 0000:00:14.0: Port change event, 1-5, id 5, portsc: 0x200e03
[30814.848973] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling.
[30814.848976] xhci_hcd 0000:39:00.0: add ep 0x81, slot id 1, new drop flags = 0x0, new add flags = 0x8
[30814.848979] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 000000009182f890
[30814.848981] xhci_hcd 0000:39:00.0: // Ding dong!
[30814.849188] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command
[30814.849330] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 000000009182f890
[30814.849337] xhci_hcd 0000:39:00.0: drop ep 0x81, slot id 1, new drop flags = 0x8, new add flags = 0x0
[30814.849342] xhci_hcd 0000:39:00.0: add ep 0x81, slot id 1, new drop flags = 0x8, new add flags = 0x8
[30814.849349] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 000000009182f890
[30814.849351] xhci_hcd 0000:39:00.0: // Ding dong!
[30814.849578] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command
[30814.849975] hub 3-1:1.0: hub_reset_resume
[30814.849982] xhci_hcd 0000:39:00.0: xHCI version 110 needs hub TT think time and number of ports
[30814.849984] xhci_hcd 0000:39:00.0: Set up configure endpoint for hub device.
[30814.849985] xhci_hcd 0000:39:00.0: // Ding dong!
[30814.850196] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command
[30814.850198] hub 3-1:1.0: enabling power on all ports
[30814.859434] xhci_hcd 0000:00:14.0: Get port status 1-5 read: 0x200e03, return 0x100503
[30814.859444] xhci_hcd 0000:00:14.0: clear port5 reset change, portsc: 0xe03
[30814.911426] xhci_hcd 0000:39:00.0: Get port status 4-1 read: 0x201203, return 0x100203
[30814.911440] xhci_hcd 0000:39:00.0: clear port1 reset change, portsc: 0x1203
[30814.911447] xhci_hcd 0000:39:00.0: clear port1 warm(BH) reset change, portsc: 0x1203
[30814.911460] xhci_hcd 0000:39:00.0: clear port1 link state change, portsc: 0x1203
[30814.911467] xhci_hcd 0000:39:00.0: clear port1 connect change, portsc: 0x1203
[30814.911471] xhci_hcd 0000:39:00.0: Get port status 4-1 read: 0x1203, return 0x203
[30814.915427] xhci_hcd 0000:00:14.0: Resetting device with slot ID 3
[30814.915432] xhci_hcd 0000:00:14.0: // Ding dong!
[30814.915582] xhci_hcd 0000:00:14.0: Completed reset device command.
[30814.915623] xhci_hcd 0000:00:14.0: Successful reset device command.
[30814.915644] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[30814.915646] xhci_hcd 0000:00:14.0: Slot already in default state
[30814.916219] xhci_hcd 0000:00:14.0: Waiting for status stage event
[30814.916472] xhci_hcd 0000:00:14.0: set port reset, actual port 1-5 status = 0xf91
[30814.967436] xhci_hcd 0000:39:00.0: The device to be reset with slot ID 0 does not exist. Re-allocate the device
[30814.967440] xhci_hcd 0000:39:00.0: // Ding dong!
[30814.967507] xhci_hcd 0000:39:00.0: Slot 2 output ctx = 0x0x00000001a3010000 (dma)
[30814.967511] xhci_hcd 0000:39:00.0: Slot 2 input ctx = 0x0x00000001b52c6000 (dma)
[30814.967514] xhci_hcd 0000:39:00.0: Set slot id 2 dcbaa entry 0000000039581918 to 0x1a3010000
[30814.967551] xhci_hcd 0000:39:00.0: Slot ID 2: HW portnum 2, hcd portnum 0
[30814.967552] xhci_hcd 0000:39:00.0: udev->tt = 0000000000000000
[30814.967553] xhci_hcd 0000:39:00.0: udev->ttport = 0x0
[30814.967555] xhci_hcd 0000:39:00.0: // Ding dong!
[30814.971320] xhci_hcd 0000:39:00.0: Successful setup address command
[30814.971332] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x00000101652000
[30814.971334] xhci_hcd 0000:39:00.0: Slot ID 2 dcbaa entry @0000000039581918 = 0x000001a3010000
[30814.971336] xhci_hcd 0000:39:00.0: Output Context DMA address = 0x1a3010000
[30814.971338] xhci_hcd 0000:39:00.0: Internal device address = 2
[30814.971344] usb 4-1: reset SuperSpeed USB device number 2 using xhci_hcd
[30814.973779] xhci_hcd 0000:00:14.0: Port change event, 1-5, id 5, portsc: 0x200e03
[30814.973782] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling.
[30814.979428] xhci_hcd 0000:00:14.0: Get port status 1-5 read: 0x200e03, return 0x100503
[30814.979440] xhci_hcd 0000:00:14.0: clear port5 reset change, portsc: 0xe03
[30814.983394] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb1 port polling
[30814.983399] xhci_hcd 0000:39:00.0: xhci_hub_status_data: stopping usb4 port polling
[30814.983425] xhci_hcd 0000:39:00.0: xhci_hub_status_data: stopping usb3 port polling
[30815.010743] usb 4-1: link tunnel state unknown
[30815.011076] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30815.011122] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 000000002dd2d892
[30815.011129] xhci_hcd 0000:39:00.0: add ep 0x81, slot id 2, new drop flags = 0x0, new add flags = 0x8
[30815.011131] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 000000002dd2d892
[30815.011134] xhci_hcd 0000:39:00.0: // Ding dong!
[30815.011379] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command
[30815.011639] xhci_hcd 0000:39:00.0: Set up evaluate context for LPM MEL change.
[30815.011650] xhci_hcd 0000:39:00.0: // Ding dong!
[30815.011716] xhci_hcd 0000:39:00.0: Successful evaluate context command
[30815.012192] hub 4-1:1.0: hub_reset_resume
[30815.035430] xhci_hcd 0000:00:14.0: Resetting device with slot ID 3
[30815.035434] xhci_hcd 0000:00:14.0: // Ding dong!
[30815.035439] xhci_hcd 0000:00:14.0: Completed reset device command.
[30815.035443] xhci_hcd 0000:00:14.0: Can't reset device (slot ID 3) in default state
[30815.035444] xhci_hcd 0000:00:14.0: Not freeing device rings.
[30815.035450] xhci_hcd 0000:00:14.0: // Ding dong!
[30815.035480] xhci_hcd 0000:00:14.0: Successful setup address command
[30815.035484] xhci_hcd 0000:00:14.0: Op regs DCBAA ptr = 0x00000105609000
[30815.035486] xhci_hcd 0000:00:14.0: Slot ID 3 dcbaa entry @000000008cba9298 = 0x00000147990000
[30815.035488] xhci_hcd 0000:00:14.0: Output Context DMA address = 0x147990000
[30815.035489] xhci_hcd 0000:00:14.0: Internal device address = 3
[30815.054092] xhci_hcd 0000:00:14.0: set port reset, actual port 1-4 status = 0x791
[30815.102066] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 000000006d668efc
[30815.102069] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 000000006d668efc
[30815.102073] xhci_hcd 0000:00:14.0: add ep 0x83, slot id 3, new drop flags = 0x0, new add flags = 0x80
[30815.102077] xhci_hcd 0000:00:14.0: add ep 0x82, slot id 3, new drop flags = 0x0, new add flags = 0xa0
[30815.102078] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 000000006d668efc
[30815.102080] xhci_hcd 0000:00:14.0: // Ding dong!
[30815.102292] xhci_hcd 0000:00:14.0: Successful Endpoint Configure command
[30815.103611] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 000000006d668efc
[30815.103619] xhci_hcd 0000:00:14.0: drop ep 0x82, slot id 3, new drop flags = 0x20, new add flags = 0x0
[30815.103623] xhci_hcd 0000:00:14.0: add ep 0x82, slot id 3, new drop flags = 0x20, new add flags = 0x20
[30815.103625] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 000000006d668efc
[30815.103627] xhci_hcd 0000:00:14.0: // Ding dong!
[30815.103851] xhci_hcd 0000:00:14.0: Successful Endpoint Configure command
[30815.111401] xhci_hcd 0000:00:14.0: Port change event, 1-4, id 4, portsc: 0x200603
[30815.111404] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling.
[30815.112653] xhci_hcd 0000:39:00.0: xHCI version 110 needs hub TT think time and number of ports
[30815.112655] xhci_hcd 0000:39:00.0: Set up configure endpoint for hub device.
[30815.112657] xhci_hcd 0000:39:00.0: // Ding dong!
[30815.112914] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command
[30815.112917] hub 4-1:1.0: enabling power on all ports
[30815.115400] xhci_hcd 0000:00:14.0: Get port status 1-4 read: 0x200603, return 0x100103
[30815.115410] xhci_hcd 0000:00:14.0: clear port4 reset change, portsc: 0x603
[30815.171386] xhci_hcd 0000:00:14.0: Resetting device with slot ID 2
[30815.171389] xhci_hcd 0000:00:14.0: // Ding dong!
[30815.171537] xhci_hcd 0000:00:14.0: Completed reset device command.
[30815.171542] xhci_hcd 0000:00:14.0: Successful reset device command.
[30815.171584] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[30815.171587] xhci_hcd 0000:00:14.0: Slot already in default state
[30815.171722] xhci_hcd 0000:00:14.0: Waiting for status stage event
[30815.171778] xhci_hcd 0000:00:14.0: set port reset, actual port 1-4 status = 0x791
[30815.229074] xhci_hcd 0000:00:14.0: Port change event, 1-4, id 4, portsc: 0x200603
[30815.229077] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling.
[30815.235387] xhci_hcd 0000:00:14.0: Get port status 1-4 read: 0x200603, return 0x100103
[30815.235397] xhci_hcd 0000:00:14.0: clear port4 reset change, portsc: 0x603
[30815.291386] xhci_hcd 0000:00:14.0: Resetting device with slot ID 2
[30815.291395] xhci_hcd 0000:00:14.0: // Ding dong!
[30815.291401] xhci_hcd 0000:00:14.0: Completed reset device command.
[30815.291406] xhci_hcd 0000:00:14.0: Can't reset device (slot ID 2) in default state
[30815.291407] xhci_hcd 0000:00:14.0: Not freeing device rings.
[30815.291412] xhci_hcd 0000:00:14.0: // Ding dong!
[30815.291445] xhci_hcd 0000:00:14.0: Successful setup address command
[30815.291448] xhci_hcd 0000:00:14.0: Op regs DCBAA ptr = 0x00000105609000
[30815.291450] xhci_hcd 0000:00:14.0: Slot ID 2 dcbaa entry @0000000056265f8d = 0x00000105588000
[30815.291451] xhci_hcd 0000:00:14.0: Output Context DMA address = 0x105588000
[30815.291453] xhci_hcd 0000:00:14.0: Internal device address = 2
[30815.307811] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 00000000d6b8c9fa
[30815.307813] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 00000000d6b8c9fa
[30815.307818] xhci_hcd 0000:00:14.0: add ep 0x81, slot id 2, new drop flags = 0x0, new add flags = 0x8
[30815.307821] xhci_hcd 0000:00:14.0: add ep 0x2, slot id 2, new drop flags = 0x0, new add flags = 0x18
[30815.307823] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 00000000d6b8c9fa
[30815.307833] xhci_hcd 0000:00:14.0: // Ding dong!
[30815.308008] xhci_hcd 0000:00:14.0: Successful Endpoint Configure command
[30815.355678] usb 3-1-port1: status 0101 change 0001
[30815.356583] usb 3-1-port5: status 0501 change 0001
[30815.475384] usb 3-1.5: Waited 0ms for CONNECT
[30815.475384] usb 3-1.1: Waited 0ms for CONNECT
[30815.475393] usb 3-1.1: finish reset-resume
[30815.475393] usb 3-1.5: finish reset-resume
[30815.479399] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb1 port polling
[30815.483625] usb 4-1-port1: status 0203 change 0011
[30815.484574] usb 4-1-port4: status 0203 change 0011
[30815.547380] xhci_hcd 0000:39:00.0: The device to be reset with slot ID 0 does not exist. Re-allocate the device
[30815.547400] xhci_hcd 0000:39:00.0: // Ding dong!
[30815.547426] xhci_hcd 0000:39:00.0: Slot 3 output ctx = 0x0x000000026ff1d000 (dma)
[30815.547429] xhci_hcd 0000:39:00.0: Slot 3 input ctx = 0x0x00000001e0b4a000 (dma)
[30815.547441] xhci_hcd 0000:39:00.0: Set slot id 3 dcbaa entry 000000001a9d05b8 to 0x26ff1d000
[30815.547460] usb 3-1.5: reset high-speed USB device number 5 using xhci_hcd
[30815.547462] xhci_hcd 0000:39:00.0: Slot ID 3: HW portnum 0, hcd portnum 0
[30815.547464] xhci_hcd 0000:39:00.0: udev->tt = 0000000000000000
[30815.547465] xhci_hcd 0000:39:00.0: udev->ttport = 0x0
[30815.547466] xhci_hcd 0000:39:00.0: // Ding dong!
[30815.547493] xhci_hcd 0000:39:00.0: Successful setup context command
[30815.547503] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x00000101652000
[30815.547504] xhci_hcd 0000:39:00.0: Slot ID 3 dcbaa entry @000000001a9d05b8 = 0x0000026ff1d000
[30815.547506] xhci_hcd 0000:39:00.0: Output Context DMA address = 0x26ff1d000
[30815.547507] xhci_hcd 0000:39:00.0: Internal device address = 0
[30815.547561] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30815.603385] usb 4-1.1: Waited 0ms for CONNECT
[30815.603387] usb 4-1.1: finish reset-resume
[30815.603423] usb 4-1.4: Waited 0ms for CONNECT
[30815.603426] usb 4-1.4: finish reset-resume
[30815.619380] xhci_hcd 0000:39:00.0: Resetting device with slot ID 3
[30815.619382] xhci_hcd 0000:39:00.0: // Ding dong!
[30815.619399] xhci_hcd 0000:39:00.0: Completed reset device command.
[30815.619403] xhci_hcd 0000:39:00.0: Can't reset device (slot ID 3) in default state
[30815.619404] xhci_hcd 0000:39:00.0: Not freeing device rings.
[30815.619408] xhci_hcd 0000:39:00.0: // Ding dong!
[30815.619454] xhci_hcd 0000:39:00.0: Successful setup address command
[30815.619457] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x00000101652000
[30815.619471] xhci_hcd 0000:39:00.0: Slot ID 3 dcbaa entry @000000001a9d05b8 = 0x0000026ff1d000
[30815.619473] xhci_hcd 0000:39:00.0: Output Context DMA address = 0x26ff1d000
[30815.619474] xhci_hcd 0000:39:00.0: Internal device address = 3
[30815.685999] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30815.686008] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 00000000db7a0f72
[30815.755383] xhci_hcd 0000:39:00.0: The device to be reset with slot ID 0 does not exist. Re-allocate the device
[30815.755388] xhci_hcd 0000:39:00.0: // Ding dong!
[30815.755420] xhci_hcd 0000:39:00.0: Slot 4 output ctx = 0x0x0000000104f85000 (dma)
[30815.755423] xhci_hcd 0000:39:00.0: Slot 4 input ctx = 0x0x000000015eaf1000 (dma)
[30815.755426] xhci_hcd 0000:39:00.0: Set slot id 4 dcbaa entry 000000004bea193f to 0x104f85000
[30815.755464] usb 3-1.1: reset high-speed USB device number 3 using xhci_hcd
[30815.755466] xhci_hcd 0000:39:00.0: Slot ID 4: HW portnum 0, hcd portnum 0
[30815.755468] xhci_hcd 0000:39:00.0: udev->tt = 0000000000000000
[30815.755469] xhci_hcd 0000:39:00.0: udev->ttport = 0x0
[30815.755471] xhci_hcd 0000:39:00.0: // Ding dong!
[30815.755492] xhci_hcd 0000:39:00.0: Successful setup context command
[30815.755497] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x00000101652000
[30815.755498] xhci_hcd 0000:39:00.0: Slot ID 4 dcbaa entry @000000004bea193f = 0x00000104f85000
[30815.755501] xhci_hcd 0000:39:00.0: Output Context DMA address = 0x104f85000
[30815.755502] xhci_hcd 0000:39:00.0: Internal device address = 0
[30815.755564] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30815.875379] xhci_hcd 0000:39:00.0: Resetting device with slot ID 4
[30815.875381] xhci_hcd 0000:39:00.0: // Ding dong!
[30815.875388] xhci_hcd 0000:39:00.0: Completed reset device command.
[30815.875393] xhci_hcd 0000:39:00.0: Can't reset device (slot ID 4) in default state
[30815.875395] xhci_hcd 0000:39:00.0: Not freeing device rings.
[30815.875399] xhci_hcd 0000:39:00.0: // Ding dong!
[30815.875535] xhci_hcd 0000:39:00.0: Successful setup address command
[30815.875539] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x00000101652000
[30815.875541] xhci_hcd 0000:39:00.0: Slot ID 4 dcbaa entry @000000004bea193f = 0x00000104f85000
[30815.875543] xhci_hcd 0000:39:00.0: Output Context DMA address = 0x104f85000
[30815.875544] xhci_hcd 0000:39:00.0: Internal device address = 4
[30815.892940] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30815.892955] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 0000000002d1665d
[30815.892960] xhci_hcd 0000:39:00.0: add ep 0x81, slot id 4, new drop flags = 0x0, new add flags = 0x8
[30815.892968] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 0000000002d1665d
[30815.892971] xhci_hcd 0000:39:00.0: // Ding dong!
[30815.893287] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command
[30815.893429] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 0000000002d1665d
[30815.893438] xhci_hcd 0000:39:00.0: drop ep 0x81, slot id 4, new drop flags = 0x8, new add flags = 0x0
[30815.893447] xhci_hcd 0000:39:00.0: add ep 0x81, slot id 4, new drop flags = 0x8, new add flags = 0x8
[30815.893450] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 0000000002d1665d
[30815.893452] xhci_hcd 0000:39:00.0: // Ding dong!
[30815.893791] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command
[30815.894253] hub 3-1.1:1.0: hub_reset_resume
[30815.894257] xhci_hcd 0000:39:00.0: xHCI version 110 needs hub TT think time and number of ports
[30815.894258] xhci_hcd 0000:39:00.0: Set up configure endpoint for hub device.
[30815.894260] xhci_hcd 0000:39:00.0: // Ding dong!
[30815.894578] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command
[30815.894580] hub 3-1.1:1.0: enabling power on all ports
[30815.963377] xhci_hcd 0000:39:00.0: The device to be reset with slot ID 0 does not exist. Re-allocate the device
[30815.963380] xhci_hcd 0000:39:00.0: // Ding dong!
[30815.963412] xhci_hcd 0000:39:00.0: Slot 5 output ctx = 0x0x00000003fe3ad000 (dma)
[30815.963415] xhci_hcd 0000:39:00.0: Slot 5 input ctx = 0x0x000000013b0ca000 (dma)
[30815.963417] xhci_hcd 0000:39:00.0: Set slot id 5 dcbaa entry 0000000052f57d98 to 0x3fe3ad000
[30815.963472] xhci_hcd 0000:39:00.0: Slot ID 5: HW portnum 2, hcd portnum 0
[30815.963473] xhci_hcd 0000:39:00.0: udev->tt = 0000000000000000
[30815.963474] xhci_hcd 0000:39:00.0: udev->ttport = 0x0
[30815.963476] xhci_hcd 0000:39:00.0: // Ding dong!
[30815.985579] xhci_hcd 0000:39:00.0: Successful setup address command
[30815.985590] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x00000101652000
[30815.985591] xhci_hcd 0000:39:00.0: Slot ID 5 dcbaa entry @0000000052f57d98 = 0x000003fe3ad000
[30815.985592] xhci_hcd 0000:39:00.0: Output Context DMA address = 0x3fe3ad000
[30815.985594] xhci_hcd 0000:39:00.0: Internal device address = 5
[30815.985598] usb 4-1.1: reset SuperSpeed USB device number 3 using xhci_hcd
[30816.043687] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30816.043699] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 00000000fc2c7b5a
[30816.043704] xhci_hcd 0000:39:00.0: add ep 0x81, slot id 5, new drop flags = 0x0, new add flags = 0x8
[30816.043706] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 00000000fc2c7b5a
[30816.043720] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.044095] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command
[30816.044342] xhci_hcd 0000:39:00.0: Set up evaluate context for LPM MEL change.
[30816.044344] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.044363] xhci_hcd 0000:39:00.0: Successful evaluate context command
[30816.045218] hub 4-1.1:1.0: hub_reset_resume
[30816.115426] xhci_hcd 0000:39:00.0: The device to be reset with slot ID 0 does not exist. Re-allocate the device
[30816.115430] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.115449] xhci_hcd 0000:39:00.0: Slot 6 output ctx = 0x0x000000014a90d000 (dma)
[30816.115452] xhci_hcd 0000:39:00.0: Slot 6 input ctx = 0x0x0000000166d26000 (dma)
[30816.115462] xhci_hcd 0000:39:00.0: Set slot id 6 dcbaa entry 00000000b832f51b to 0x14a90d000
[30816.115476] xhci_hcd 0000:39:00.0: Slot ID 6: HW portnum 2, hcd portnum 0
[30816.115477] xhci_hcd 0000:39:00.0: udev->tt = 0000000000000000
[30816.115478] xhci_hcd 0000:39:00.0: udev->ttport = 0x0
[30816.115480] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.115560] xhci_hcd 0000:39:00.0: Successful setup address command
[30816.115565] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x00000101652000
[30816.115567] xhci_hcd 0000:39:00.0: Slot ID 6 dcbaa entry @00000000b832f51b = 0x0000014a90d000
[30816.115569] xhci_hcd 0000:39:00.0: Output Context DMA address = 0x14a90d000
[30816.115571] xhci_hcd 0000:39:00.0: Internal device address = 6
[30816.115577] usb 4-1.4: reset SuperSpeed USB device number 4 using xhci_hcd
[30816.132523] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30816.132537] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 0000000005095cdf
[30816.132540] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 0000000005095cdf
[30816.132546] xhci_hcd 0000:39:00.0: add ep 0x1, slot id 6, new drop flags = 0x0, new add flags = 0x4
[30816.132552] xhci_hcd 0000:39:00.0: add ep 0x82, slot id 6, new drop flags = 0x0, new add flags = 0x24
[30816.132553] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 0000000005095cdf
[30816.132555] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.132971] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command
[30816.133104] xhci_hcd 0000:39:00.0: Set up evaluate context for LPM MEL change.
[30816.133107] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.133172] xhci_hcd 0000:39:00.0: Successful evaluate context command
[30816.145768] xhci_hcd 0000:39:00.0: xHCI version 110 needs hub TT think time and number of ports
[30816.145770] xhci_hcd 0000:39:00.0: Set up configure endpoint for hub device.
[30816.145771] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.146185] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command
[30816.146186] hub 4-1.1:1.0: enabling power on all ports
[30816.508128] usb 4-1.1-port3: status 0203 change 0011
[30816.613792] OOM killer enabled.
[30816.613795] Restarting tasks ...
[30816.613809] pci_bus 0000:02: Allocating resources
[30816.613836] hub 4-1:1.0: state 7 ports 4 chg 0000 evt 0010
[30816.613836] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[30816.613846] hub 3-1:1.0: state 7 ports 5 chg 0000 evt 0000
[30816.613857] hub 3-1.1:1.0: state 7 ports 4 chg 0000 evt 0000
[30816.613907] hub 1-0:1.0: state 7 ports 12 chg 0000 evt 0010
[30816.613918] xhci_hcd 0000:00:14.0: Get port status 1-4 read: 0x603, return 0x103
[30816.613938] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[30816.613945] hub 4-1.1:1.0: state 7 ports 4 chg 0008 evt 0000
[30816.613986] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[30816.614104] xhci_hcd 0000:39:00.0: Giveback URB 000000002883b784, len = 18, expected = 96, status = 0
[30816.614140] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 6 ep 4
[30816.614144] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 6
[30816.614148] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.614181] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30816.614184] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x111d6e020 (dma) in stream 0 URB 0000000020351fd3
[30816.614190] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x111d6e030, cycle 1
[30816.614193] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.614197] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30816.614221] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @111d6e030
[30816.614225] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30816.614228] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30816.614233] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30816.614253] usb 4-1.1-port3: status 0203, change 0000, 5.0 Gb/s
[30816.614259] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.614265] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[30816.614288] xhci_hcd 0000:39:00.0: Slot 7 output ctx = 0x0x0000000145d87000 (dma)
[30816.614301] xhci_hcd 0000:39:00.0: Slot 7 input ctx = 0x0x00000002c1a7e000 (dma)
[30816.614308] xhci_hcd 0000:39:00.0: Set slot id 7 dcbaa entry 000000008a9486e8 to 0x145d87000
[30816.614357] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[30816.614365] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[30816.614378] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30816.614382] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30816.614386] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30816.614388] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30816.614427] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30816.614431] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30816.614434] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30816.614436] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30816.614476] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30816.614481] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30816.614503] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30816.614522] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30816.614526] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30816.614529] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30816.614533] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30816.614536] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30816.614579] hub 3-1.1:1.0: hub_suspend
[30816.614588] xhci_hcd 0000:39:00.0: Cancel URB 000000000f03686a, dev 1.1, ep 0x81, starting at offset 0x16c999000
[30816.614596] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.614610] xhci_hcd 0000:39:00.0: Stopped on Transfer TRB for slot 4 ep 2
[30816.614616] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x16c999000 (dma) in stream 0 URB 000000000f03686a
[30816.614622] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x16c999010, cycle 1
[30816.614626] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.614630] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 000000000f03686a TD as cancel_status is 2
[30816.614637] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @16c999010
[30816.614641] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 000000000f03686a TD
[30816.614644] xhci_hcd 0000:39:00.0: Giveback URB 000000000f03686a, len = 0, expected = 1, status = -115
[30816.614650] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30816.614959] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2-1 status = 0xe0002a0
[30816.615219] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[30816.615361] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2-2 status = 0xe0002a0
[30816.615390] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2-3 status = 0xe0002a0
[30816.615407] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2-4 status = 0xe0002a0
[30816.615423] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2-5 status = 0xe0002a0
[30816.615443] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2-6 status = 0xe0002a0
[30816.615454] hub 2-0:1.0: hub_suspend
[30816.615466] usb usb2: bus auto-suspend, wakeup 1
[30816.615484] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb2 port polling
[30816.615507] done.
[30816.615516] random: crng reseeded on system resumption
[30816.615690] usb 3-1.1: usb auto-suspend, wakeup 1
[30816.617261] xhci_hcd 0000:39:00.0: Giveback URB 000000007e7a96bf, len = 18, expected = 96, status = 0
[30816.617314] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 6 ep 4
[30816.617321] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 6
[30816.617328] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.617354] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30816.617357] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x111d6e060 (dma) in stream 0 URB 0000000020351fd3
[30816.617363] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x111d6e070, cycle 1
[30816.617367] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.617371] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30816.617378] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @111d6e070
[30816.617382] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30816.617387] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30816.617394] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30816.619140] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[30816.639804] pci_bus 0000:02: Allocating resources
[30816.639829] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[30816.639834] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[30816.639838] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[30816.639842] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[30816.639847] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30816.639850] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30816.639853] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[30816.639855] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[30816.639861] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30816.639863] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30816.639865] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30816.639866] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30816.639868] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30816.639870] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30816.639873] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[30816.639876] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[30816.639879] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[30816.639881] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[30816.639883] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[30816.639885] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[30816.674991] PM: suspend exit
[30816.683670] xhci_hcd 0000:39:00.0: Slot ID 7: HW portnum 2, hcd portnum 0
[30816.683681] xhci_hcd 0000:39:00.0: udev->tt = 0000000000000000
[30816.683690] xhci_hcd 0000:39:00.0: udev->ttport = 0x0
[30816.683693] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.683921] xhci_hcd 0000:39:00.0: Successful setup address command
[30816.683927] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x00000101652000
[30816.683936] xhci_hcd 0000:39:00.0: Slot ID 7 dcbaa entry @000000008a9486e8 = 0x00000145d87000
[30816.683939] xhci_hcd 0000:39:00.0: Output Context DMA address = 0x145d87000
[30816.683942] xhci_hcd 0000:39:00.0: Internal device address = 7
[30816.683947] usb 4-1.1.3: new SuperSpeed USB device number 5 using xhci_hcd
[30816.700002] usb 4-1.1.3: USB quirks for this device: 400
[30816.700211] usb 4-1.1.3: skipped 1 descriptor after endpoint
[30816.700215] usb 4-1.1.3: skipped 1 descriptor after endpoint
[30816.700218] usb 4-1.1.3: skipped 1 descriptor after endpoint
[30816.700299] usb 4-1.1.3: skipped 3 descriptors after interface
[30816.700302] usb 4-1.1.3: skipped 1 descriptor after endpoint
[30816.700310] usb 4-1.1.3: skipped 1 descriptor after endpoint
[30816.700312] usb 4-1.1.3: skipped 1 descriptor after endpoint
[30816.700342] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30816.700391] usb 4-1.1.3: default language 0x0409
[30816.700422] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30816.700502] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30816.700542] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30816.700556] usb 4-1.1.3: udev 5, busnum 4, minor = 388
[30816.700559] usb 4-1.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[30816.700562] usb 4-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[30816.700565] usb 4-1.1.3: Product: USB 10/100/1000 LAN
[30816.700566] usb 4-1.1.3: Manufacturer: Realtek
[30816.700568] usb 4-1.1.3: SerialNumber: 000001
[30816.700733] r8152-cfgselector 4-1.1.3: usb_probe_device
[30816.701055] xhci_hcd 0000:39:00.0: add ep 0x81, slot id 7, new drop flags = 0x0, new add flags = 0x8
[30816.701063] xhci_hcd 0000:39:00.0: add ep 0x2, slot id 7, new drop flags = 0x0, new add flags = 0x18
[30816.701076] xhci_hcd 0000:39:00.0: add ep 0x83, slot id 7, new drop flags = 0x0, new add flags = 0x98
[30816.701079] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 00000000a45e1905
[30816.701084] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.701655] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command
[30816.701698] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.701714] xhci_hcd 0000:39:00.0: Stopped on No-op or Link TRB for slot 7 ep 2
[30816.701747] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.702196] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.702228] xhci_hcd 0000:39:00.0: Stopped on No-op or Link TRB for slot 7 ep 3
[30816.702464] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.702913] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.702937] xhci_hcd 0000:39:00.0: Stopped on No-op or Link TRB for slot 7 ep 6
[30816.702953] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.703635] r8152-cfgselector 4-1.1.3: adding 4-1.1.3:1.0 (config #1, interface 0)
[30816.703722] r8152 4-1.1.3:1.0: usb_probe_interface
[30816.703727] r8152 4-1.1.3:1.0: usb_probe_interface - got id
[30816.775409] xhci_hcd 0000:39:00.0: Resetting device with slot ID 7
[30816.775419] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.775621] xhci_hcd 0000:39:00.0: Completed reset device command.
[30816.775631] xhci_hcd 0000:39:00.0: Successful reset device command.
[30816.775749] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.775796] xhci_hcd 0000:39:00.0: Successful setup address command
[30816.775801] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x00000101652000
[30816.775804] xhci_hcd 0000:39:00.0: Slot ID 7 dcbaa entry @000000008a9486e8 = 0x00000145d87000
[30816.775807] xhci_hcd 0000:39:00.0: Output Context DMA address = 0x145d87000
[30816.775815] xhci_hcd 0000:39:00.0: Internal device address = 7
[30816.775819] r8152-cfgselector 4-1.1.3: reset SuperSpeed USB device number 5 using xhci_hcd
[30816.791525] r8152-cfgselector 4-1.1.3: USB quirks for this device: 400
[30816.791729] xhci_hcd 0000:39:00.0: Waiting for status stage event
[30816.791782] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 00000000a45e1905
[30816.791787] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 00000000a45e1905
[30816.791789] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 00000000a45e1905
[30816.791802] xhci_hcd 0000:39:00.0: add ep 0x81, slot id 7, new drop flags = 0x0, new add flags = 0x8
[30816.791807] xhci_hcd 0000:39:00.0: add ep 0x2, slot id 7, new drop flags = 0x0, new add flags = 0x18
[30816.791812] xhci_hcd 0000:39:00.0: add ep 0x83, slot id 7, new drop flags = 0x0, new add flags = 0x98
[30816.791814] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 00000000a45e1905
[30816.791825] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.792312] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command
[30816.832685] btusb 1-3:1.0: usb_probe_interface
[30816.832693] btusb 1-3:1.0: usb_probe_interface - got id
[30816.834983] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[30816.834989] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[30816.848815] r8152 4-1.1.3:1.0 eth0: v1.12.13
[30816.848962] hub 4-1.1:1.0: state 7 ports 4 chg 0000 evt 0008
[30816.929965] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 7 ep 0
[30816.929973] xhci_hcd 0000:39:00.0: Hard-reset ep 0, slot 7
[30816.929977] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.929996] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30816.929999] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x299233570 (dma) in stream 0 URB 00000000da68f555
[30816.930004] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x2992335a0, cycle 0
[30816.930007] xhci_hcd 0000:39:00.0: // Ding dong!
[30816.930010] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000da68f555 TD as cancel_status is 2
[30816.930045] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @2992335a0
[30816.930048] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000da68f555 TD
[30816.930051] xhci_hcd 0000:39:00.0: Giveback URB 00000000da68f555, len = 0, expected = 1024, status = -32
[30816.930056] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30816.959617] r8152 4-1.1.3:1.0 enx00e04ceb9e75: renamed from eth0
[30817.005825] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 7 ep 0
[30817.005833] xhci_hcd 0000:39:00.0: Hard-reset ep 0, slot 7
[30817.005838] xhci_hcd 0000:39:00.0: // Ding dong!
[30817.005863] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30817.005866] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x299233f90 (dma) in stream 0 URB 0000000078112b72
[30817.005871] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x299233fc0, cycle 0
[30817.005874] xhci_hcd 0000:39:00.0: // Ding dong!
[30817.005877] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000078112b72 TD as cancel_status is 2
[30817.005903] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @299233fc0
[30817.005906] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000078112b72 TD
[30817.005909] xhci_hcd 0000:39:00.0: Giveback URB 0000000078112b72, len = 0, expected = 1024, status = -32
[30817.005913] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30817.190512] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[30817.213216] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[30817.518007] xhci_hcd 0000:00:14.0: Cancel URB 0000000021133d26, dev 3, ep 0x81, starting at offset 0x103419270
[30817.518034] xhci_hcd 0000:00:14.0: // Ding dong!
[30817.518056] xhci_hcd 0000:00:14.0: Stopped on Transfer TRB for slot 1 ep 2
[30817.518068] xhci_hcd 0000:00:14.0: Removing canceled TD starting at 0x103419270 (dma) in stream 0 URB 0000000021133d26
[30817.518080] xhci_hcd 0000:00:14.0: Set TR Deq ptr 0x103419280, cycle 1
[30817.518086] xhci_hcd 0000:00:14.0: // Ding dong!
[30817.518091] xhci_hcd 0000:00:14.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000021133d26 TD as cancel_status is 2
[30817.518101] xhci_hcd 0000:00:14.0: Successful Set TR Deq Ptr cmd, deq = @103419280
[30817.518107] xhci_hcd 0000:00:14.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000021133d26 TD
[30817.518113] xhci_hcd 0000:00:14.0: Giveback URB 0000000021133d26, len = 0, expected = 260, status = -115
[30817.518122] xhci_hcd 0000:00:14.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30817.518159] xhci_hcd 0000:00:14.0: Cancel URB 000000003fe69f8e, dev 3, ep 0x82, starting at offset 0x1047dd010
[30817.518171] xhci_hcd 0000:00:14.0: // Ding dong!
[30817.518189] xhci_hcd 0000:00:14.0: Stopped on Transfer TRB for slot 1 ep 4
[30817.518195] xhci_hcd 0000:00:14.0: Removing canceled TD starting at 0x1047dd010 (dma) in stream 0 URB 000000003fe69f8e
[30817.518202] xhci_hcd 0000:00:14.0: xhci_giveback_invalidated_tds: Giveback cancelled URB 000000003fe69f8e TD
[30817.518235] xhci_hcd 0000:00:14.0: Cancel URB 0000000091cd1dd5, dev 3, ep 0x82, starting at offset 0x1047dd000
[30817.518245] xhci_hcd 0000:00:14.0: // Ding dong!
[30817.518258] xhci_hcd 0000:00:14.0: Stopped on Transfer TRB for slot 1 ep 4
[30817.518265] xhci_hcd 0000:00:14.0: Removing canceled TD starting at 0x1047dd000 (dma) in stream 0 URB 0000000091cd1dd5
[30817.518272] xhci_hcd 0000:00:14.0: Set TR Deq ptr 0x1047dd010, cycle 1
[30817.518276] xhci_hcd 0000:00:14.0: // Ding dong!
[30817.518281] xhci_hcd 0000:00:14.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000091cd1dd5 TD as cancel_status is 2
[30817.518288] xhci_hcd 0000:00:14.0: Successful Set TR Deq Ptr cmd, deq = @1047dd010
[30817.518292] xhci_hcd 0000:00:14.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000091cd1dd5 TD
[30817.518297] xhci_hcd 0000:00:14.0: Giveback URB 0000000091cd1dd5, len = 0, expected = 1028, status = -115
[30817.518304] xhci_hcd 0000:00:14.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30817.615653] xhci_hcd 0000:00:14.0: // Ding dong!
[30817.615675] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 3 ep 6
[30817.615687] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 3 ep 4
[30817.615693] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 3 ep 0
[30817.615711] xhci_hcd 0000:00:14.0: Set port 1-5 link state, portsc: 0xe03, write 0x10e61
[30817.631415] usb 1-5: usb auto-suspend, wakeup 0
[30817.811443] xhci_hcd 0000:00:14.0: Cancel URB 00000000da0fed81, dev 4, ep 0x81, starting at offset 0x147991000
[30817.811473] xhci_hcd 0000:00:14.0: // Ding dong!
[30817.811493] xhci_hcd 0000:00:14.0: Stopped on Transfer TRB for slot 2 ep 2
[30817.811505] xhci_hcd 0000:00:14.0: Removing canceled TD starting at 0x147991000 (dma) in stream 0 URB 00000000da0fed81
[30817.811517] xhci_hcd 0000:00:14.0: Set TR Deq ptr 0x147991010, cycle 1
[30817.811523] xhci_hcd 0000:00:14.0: // Ding dong!
[30817.811527] xhci_hcd 0000:00:14.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000da0fed81 TD as cancel_status is 2
[30817.811538] xhci_hcd 0000:00:14.0: Successful Set TR Deq Ptr cmd, deq = @147991010
[30817.811544] xhci_hcd 0000:00:14.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000da0fed81 TD
[30817.811549] xhci_hcd 0000:00:14.0: Giveback URB 00000000da0fed81, len = 0, expected = 116, status = -115
[30817.811559] xhci_hcd 0000:00:14.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30817.811663] xhci_hcd 0000:00:14.0: // Ding dong!
[30817.811683] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 2 ep 3
[30817.811692] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 2 ep 0
[30817.811709] xhci_hcd 0000:00:14.0: Set port 1-4 link state, portsc: 0x603, write 0x10661
[30817.827429] usb 1-4: usb auto-suspend, wakeup 1
[30818.624080] xhci_hcd 0000:39:00.0: Giveback URB 000000005f7e2f13, len = 18, expected = 96, status = 0
[30818.624280] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 6 ep 4
[30818.624303] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 6
[30818.624317] xhci_hcd 0000:39:00.0: // Ding dong!
[30818.624338] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30818.624347] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x111d6e0a0 (dma) in stream 0 URB 0000000020351fd3
[30818.624363] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x111d6e0b0, cycle 1
[30818.624372] xhci_hcd 0000:39:00.0: // Ding dong!
[30818.624380] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30818.624394] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @111d6e0b0
[30818.624403] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30818.624412] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30818.624428] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30818.625269] xhci_hcd 0000:39:00.0: Giveback URB 000000005f7e2f13, len = 18, expected = 96, status = 0
[30818.625401] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 6 ep 4
[30818.625420] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 6
[30818.625432] xhci_hcd 0000:39:00.0: // Ding dong!
[30818.625450] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30818.625456] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x111d6e0e0 (dma) in stream 0 URB 0000000020351fd3
[30818.625469] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x111d6e0f0, cycle 1
[30818.625477] xhci_hcd 0000:39:00.0: // Ding dong!
[30818.625483] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30818.625495] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @111d6e0f0
[30818.625502] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30818.625510] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30818.625523] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30820.268683] r8152 4-1.1.3:1.0 enx00e04ceb9e75: carrier on
[30820.636358] xhci_hcd 0000:39:00.0: Giveback URB 000000003fe69f8e, len = 18, expected = 96, status = 0
[30820.636582] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 6 ep 4
[30820.636607] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 6
[30820.636623] xhci_hcd 0000:39:00.0: // Ding dong!
[30820.636651] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30820.636661] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x111d6e120 (dma) in stream 0 URB 0000000020351fd3
[30820.636678] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x111d6e130, cycle 1
[30820.636687] xhci_hcd 0000:39:00.0: // Ding dong!
[30820.636695] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30820.636710] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @111d6e130
[30820.636722] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30820.636732] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30820.636749] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30820.639790] xhci_hcd 0000:39:00.0: Giveback URB 000000003fe69f8e, len = 18, expected = 96, status = 0
[30820.639864] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 6 ep 4
[30820.639877] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 6
[30820.639890] xhci_hcd 0000:39:00.0: // Ding dong!
[30820.639909] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30820.639918] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x111d6e160 (dma) in stream 0 URB 0000000020351fd3
[30820.639933] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x111d6e170, cycle 1
[30820.639941] xhci_hcd 0000:39:00.0: // Ding dong!
[30820.639949] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30820.639961] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @111d6e170
[30820.639970] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30820.639978] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30820.639991] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30822.651669] xhci_hcd 0000:39:00.0: Giveback URB 00000000d48d1d64, len = 18, expected = 96, status = 0
[30822.651706] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 6 ep 4
[30822.651710] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 6
[30822.651713] xhci_hcd 0000:39:00.0: // Ding dong!
[30822.651741] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30822.651743] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x111d6e1a0 (dma) in stream 0 URB 0000000020351fd3
[30822.651747] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x111d6e1b0, cycle 1
[30822.651749] xhci_hcd 0000:39:00.0: // Ding dong!
[30822.651751] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30822.651781] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @111d6e1b0
[30822.651783] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30822.651785] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30822.651787] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30822.652105] xhci_hcd 0000:39:00.0: Giveback URB 00000000d48d1d64, len = 18, expected = 96, status = 0
[30822.652145] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 6 ep 4
[30822.652147] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 6
[30822.652149] xhci_hcd 0000:39:00.0: // Ding dong!
[30822.652185] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30822.652186] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x111d6e1e0 (dma) in stream 0 URB 0000000020351fd3
[30822.652189] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x111d6e1f0, cycle 1
[30822.652190] xhci_hcd 0000:39:00.0: // Ding dong!
[30822.652193] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30822.652225] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @111d6e1f0
[30822.652227] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30822.652228] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30822.652231] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30824.667525] xhci_hcd 0000:39:00.0: Giveback URB 00000000ad900f18, len = 18, expected = 96, status = 0
[30824.667561] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 6 ep 4
[30824.667564] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 6
[30824.667567] xhci_hcd 0000:39:00.0: // Ding dong!
[30824.667602] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30824.667604] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x111d6e220 (dma) in stream 0 URB 0000000020351fd3
[30824.667607] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x111d6e230, cycle 1
[30824.667608] xhci_hcd 0000:39:00.0: // Ding dong!
[30824.667611] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30824.667641] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @111d6e230
[30824.667643] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30824.667644] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30824.667647] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30824.667954] xhci_hcd 0000:39:00.0: Giveback URB 00000000ad900f18, len = 18, expected = 96, status = 0
[30824.667994] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 6 ep 4
[30824.667996] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 6
[30824.667997] xhci_hcd 0000:39:00.0: // Ding dong!
[30824.668034] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30824.668035] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x111d6e260 (dma) in stream 0 URB 0000000020351fd3
[30824.668037] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x111d6e270, cycle 1
[30824.668039] xhci_hcd 0000:39:00.0: // Ding dong!
[30824.668041] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30824.668074] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @111d6e270
[30824.668075] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30824.668077] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30824.668078] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30826.684008] xhci_hcd 0000:39:00.0: Giveback URB 00000000e47166e2, len = 18, expected = 96, status = 0
[30826.684091] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 6 ep 4
[30826.684104] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 6
[30826.684114] xhci_hcd 0000:39:00.0: // Ding dong!
[30826.684149] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30826.684157] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x111d6e2a0 (dma) in stream 0 URB 0000000020351fd3
[30826.684169] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x111d6e2b0, cycle 1
[30826.684177] xhci_hcd 0000:39:00.0: // Ding dong!
[30826.684183] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30826.684195] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @111d6e2b0
[30826.684203] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30826.684210] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30826.684221] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[30826.684723] xhci_hcd 0000:39:00.0: Giveback URB 00000000e47166e2, len = 18, expected = 96, status = 0
[30826.684774] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 6 ep 4
[30826.684785] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 6
[30826.684795] xhci_hcd 0000:39:00.0: // Ding dong!
[30826.684817] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1
[30826.684824] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0x111d6e2e0 (dma) in stream 0 URB 0000000020351fd3
[30826.684835] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0x111d6e2f0, cycle 1
[30826.684843] xhci_hcd 0000:39:00.0: // Ding dong!
[30826.684849] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 0000000020351fd3 TD as cancel_status is 2
[30826.684859] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @111d6e2f0
[30826.684867] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 0000000020351fd3 TD
[30826.684874] xhci_hcd 0000:39:00.0: Giveback URB 0000000020351fd3, len = 0, expected = 13, status = -32
[30826.684884] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell
[33514.096275] audit: type=1400 audit(1739986594.607:29): apparmor="DENIED" operation="open" class="file" profile="/usr/bin/evince" name="/home/pmenzel/dmesg-efi-158345625503001" pid=35414 comm="pool-1" requested_mask="r" denied_mask="r" fsuid=5272 ouid=0
[33514.096333] audit: type=1400 audit(1739986594.607:30): apparmor="DENIED" operation="open" class="file" profile="/usr/bin/evince" name="/home/pmenzel/dmesg-efi-158345625504001" pid=35414 comm="pool-1" requested_mask="r" denied_mask="r" fsuid=5272 ouid=0
[33514.096375] audit: type=1400 audit(1739986594.607:31): apparmor="DENIED" operation="open" class="file" profile="/usr/bin/evince" name="/home/pmenzel/dmesg-efi-158345625605001" pid=35414 comm="pool-1" requested_mask="r" denied_mask="r" fsuid=5272 ouid=0
[33514.096414] audit: type=1400 audit(1739986594.607:32): apparmor="DENIED" operation="open" class="file" profile="/usr/bin/evince" name="/home/pmenzel/dmesg-efi-158345625606001" pid=35414 comm="pool-1" requested_mask="r" denied_mask="r" fsuid=5272 ouid=0
[33514.096454] audit: type=1400 audit(1739986594.607:33): apparmor="DENIED" operation="open" class="file" profile="/usr/bin/evince" name="/home/pmenzel/dmesg-efi-158345625607001" pid=35414 comm="pool-1" requested_mask="r" denied_mask="r" fsuid=5272 ouid=0
[33514.096492] audit: type=1400 audit(1739986594.607:34): apparmor="DENIED" operation="open" class="file" profile="/usr/bin/evince" name="/home/pmenzel/dmesg-efi-158345625608001" pid=35414 comm="pool-1" requested_mask="r" denied_mask="r" fsuid=5272 ouid=0
[33514.102930] audit: type=1400 audit(1739986594.615:35): apparmor="DENIED" operation="open" class="file" profile="/usr/bin/evince" name="/home/pmenzel/plymouth-quit-wait.service" pid=35414 comm="pool-1" requested_mask="r" denied_mask="r" fsuid=5272 ouid=0
[33514.129266] audit: type=1400 audit(1739986594.639:36): apparmor="DENIED" operation="open" class="file" profile="/usr/bin/evince" name="/home/pmenzel/dmesg-efi-158345625501001" pid=35414 comm="pool-1" requested_mask="r" denied_mask="r" fsuid=5272 ouid=0
[33514.129307] audit: type=1400 audit(1739986594.639:37): apparmor="DENIED" operation="open" class="file" profile="/usr/bin/evince" name="/home/pmenzel/dmesg-efi-158345625502001" pid=35414 comm="pool-1" requested_mask="r" denied_mask="r" fsuid=5272 ouid=0
[33514.129335] audit: type=1400 audit(1739986594.639:38): apparmor="DENIED" operation="open" class="file" profile="/usr/bin/evince" name="/home/pmenzel/dmesg-efi-158345625609001" pid=35414 comm="pool-1" requested_mask="r" denied_mask="r" fsuid=5272 ouid=0
[34066.500163] r8152 4-1.1.3:1.0 enx00e04ceb9e75: carrier off
[34070.952114] usb 3-1: USB disconnect, device number 2
[34070.952135] usb 3-1.1: USB disconnect, device number 3
[34070.953912] usb 3-1.5: USB disconnect, device number 5
[34070.989022] xhci_hcd 0000:39:00.0: xHCI host controller not responding, assume dead
[34070.989090] xhci_hcd 0000:39:00.0: HC died; cleaning up
[34070.989154] r8152 4-1.1.3:1.0 enx00e04ceb9e75: Stop submitting intr, status -108
[34071.117576] xhci_hcd 0000:39:00.0: remove, state 1
[34071.117614] usb usb4: USB disconnect, device number 1
[34071.134850] usb 4-1: USB disconnect, device number 2
[34071.134868] usb 4-1.1: USB disconnect, device number 3
[34071.134892] r8152-cfgselector 4-1.1.3: USB disconnect, device number 5
[34071.242805] usb 4-1.4: USB disconnect, device number 4
[34071.503992] xhci_hcd 0000:39:00.0: USB bus 4 deregistered
[34071.504066] xhci_hcd 0000:39:00.0: remove, state 1
[34071.504081] usb usb3: USB disconnect, device number 1
[34071.507190] xhci_hcd 0000:39:00.0: Host halt failed, -19
[34071.507229] xhci_hcd 0000:39:00.0: Host not accessible, reset failed.
[34071.508132] xhci_hcd 0000:39:00.0: USB bus 3 deregistered
[34071.537034] pci_bus 0000:02: Allocating resources
[34071.537115] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[34071.537155] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[34071.537188] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[34071.537211] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[34071.537248] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[34071.537274] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[34071.537287] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[34071.537332] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[34071.537373] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[34071.537385] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[34071.537398] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[34071.537421] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[34071.537431] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[34071.537441] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[34071.537474] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[34071.537484] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[34071.537511] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[34071.537520] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[34071.537546] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[34071.537556] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[34076.179487] pcieport 0000:02:00.0: Unable to change power state from D3hot to D0, device inaccessible
[34076.182426] pci_bus 0000:03: busn_res: [bus 03] is released
[34076.182977] pci_bus 0000:04: busn_res: [bus 04-38] is released
[34076.183205] pci_bus 0000:39: busn_res: [bus 39] is released
[34076.183383] pci_bus 0000:02: busn_res: [bus 02-39] is released
[34086.007400] PM: suspend entry (deep)
[34086.037965] Filesystems sync: 0.030 seconds
[34086.049413] Freezing user space processes
[34086.052026] Freezing user space processes completed (elapsed 0.002 seconds)
[34086.052037] OOM killer disabled.
[34086.052040] Freezing remaining freezable tasks
[34086.054027] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[34086.054142] printk: Suspending console(s) (use no_console_suspend to debug)
[34086.627437] ACPI: EC: interrupt blocked
[34086.654849] ACPI: PM: Preparing to enter system sleep state S3
[34086.664770] ACPI: EC: event blocked
[34086.664774] ACPI: EC: EC stopped
[34086.664776] ACPI: PM: Saving platform NVS memory
[34086.668021] Disabling non-boot CPUs ...
[34086.669930] smpboot: CPU 3 is now offline
[34086.674068] smpboot: CPU 2 is now offline
[34086.679594] smpboot: CPU 1 is now offline
[34086.689662] ACPI: PM: Low-level resume complete
[34086.689708] ACPI: EC: EC started
[34086.689708] ACPI: PM: Restoring platform NVS memory
[34086.691638] Enabling non-boot CPUs ...
[34086.691661] smpboot: Booting Node 0 Processor 1 APIC 0x2
[34086.692347] CPU1 is up
[34086.692363] smpboot: Booting Node 0 Processor 2 APIC 0x1
[34086.693093] CPU2 is up
[34086.693110] smpboot: Booting Node 0 Processor 3 APIC 0x3
[34086.693773] CPU3 is up
[34086.696621] ACPI: PM: Waking up from system sleep state S3
[34086.725982] ACPI: EC: interrupt unblocked
[34086.741897] ACPI: EC: event unblocked
[34086.744461] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[34086.744476] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[34086.757697] nvme nvme0: 4/0/0 default/read/poll queues
[34086.769602] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[34086.769610] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[34086.769614] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[34086.995119] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[34087.002926] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[34087.251109] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[34087.507250] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[34087.646518] OOM killer enabled.
[34087.646521] Restarting tasks ... done.
[34087.648004] random: crng reseeded on system resumption
[34087.756390] PM: suspend exit
[34087.859154] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[34087.859179] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[34088.192103] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[34088.223794] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[34088.249415] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[34098.278877] usb 1-1: new full-speed USB device number 8 using xhci_hcd
[34098.420092] usb 1-1: New USB device found, idVendor=1395, idProduct=0025, bcdDevice= 1.00
[34098.420111] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[34098.420119] usb 1-1: Product: Sennheiser USB headset
[34098.420134] usb 1-1: Manufacturer: Sennheiser Communications
[34098.443667] input: Sennheiser Communications Sennheiser USB headset as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3/0003:1395:0025.000C/input/input51
[34098.499215] hid-generic 0003:1395:0025.000C: input,hidraw2: USB HID v1.00 Device [Sennheiser Communications Sennheiser USB headset] on usb-0000:00:14.0-1/input3
[34173.123751] wlp58s0: authenticate with 00:81:c4:7c:a1:ff (local address=9c:b6:d0:d1:6a:b1)
[34173.123835] wlp58s0: send auth to 00:81:c4:7c:a1:ff (try 1/3)
[34173.124702] wlp58s0: authenticated
[34173.126975] wlp58s0: associate with 00:81:c4:7c:a1:ff (try 1/3)
[34173.129070] wlp58s0: RX AssocResp from 00:81:c4:7c:a1:ff (capab=0x101 status=0 aid=36)
[34173.133655] wlp58s0: associated
[34173.164550] wlp58s0: Limiting TX power to 17 dBm as advertised by 00:81:c4:7c:a1:ff
[34197.798281] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[34197.835655] wlp58s0: Connection to AP 00:00:00:00:00:00 lost
[34203.176472] wlp58s0: authenticate with 00:81:c4:7c:a0:bf (local address=9c:b6:d0:d1:6a:b1)
[34203.176498] wlp58s0: send auth to 00:81:c4:7c:a0:bf (try 1/3)
[34203.177646] wlp58s0: send auth to 00:81:c4:7c:a0:bf (try 2/3)
[34203.180511] wlp58s0: send auth to 00:81:c4:7c:a0:bf (try 3/3)
[34203.181836] wlp58s0: authentication with 00:81:c4:7c:a0:bf timed out
[34204.232890] wlp58s0: authenticate with 00:81:c4:e7:0e:3f (local address=9c:b6:d0:d1:6a:b1)
[34204.232913] wlp58s0: send auth to 00:81:c4:e7:0e:3f (try 1/3)
[34204.234264] wlp58s0: send auth to 00:81:c4:e7:0e:3f (try 2/3)
[34204.235579] wlp58s0: send auth to 00:81:c4:e7:0e:3f (try 3/3)
[34204.237234] wlp58s0: authentication with 00:81:c4:e7:0e:3f timed out
[34205.435585] wlp58s0: authenticate with 00:81:c4:e7:0e:30 (local address=9c:b6:d0:d1:6a:b1)
[34205.435649] wlp58s0: send auth to 00:81:c4:e7:0e:30 (try 1/3)
[34205.437306] wlp58s0: send auth to 00:81:c4:e7:0e:30 (try 2/3)
[34205.438968] wlp58s0: send auth to 00:81:c4:e7:0e:30 (try 3/3)
[34205.440648] wlp58s0: authentication with 00:81:c4:e7:0e:30 timed out
[34231.352162] wlp58s0: authenticate with 00:f6:63:9f:77:ff (local address=9c:b6:d0:d1:6a:b1)
[34231.352171] wlp58s0: send auth to 00:f6:63:9f:77:ff (try 1/3)
[34231.352752] wlp58s0: authenticated
[34231.354013] wlp58s0: associate with 00:f6:63:9f:77:ff (try 1/3)
[34231.355795] wlp58s0: RX AssocResp from 00:f6:63:9f:77:ff (capab=0x101 status=0 aid=193)
[34231.358630] wlp58s0: associated
[34231.375482] wlp58s0: Limiting TX power to 17 dBm as advertised by 00:f6:63:9f:77:ff
[34266.661792] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[34266.668950] wlp58s0: Connection to AP 00:00:00:00:00:00 lost
[34267.036073] wlp58s0: authenticate with 00:f6:63:d7:2a:7f (local address=9c:b6:d0:d1:6a:b1)
[34267.036081] wlp58s0: send auth to 00:f6:63:d7:2a:7f (try 1/3)
[34267.038510] wlp58s0: send auth to 00:f6:63:d7:2a:7f (try 2/3)
[34267.039697] wlp58s0: send auth to 00:f6:63:d7:2a:7f (try 3/3)
[34267.040727] wlp58s0: authentication with 00:f6:63:d7:2a:7f timed out
[34267.688721] wlp58s0: authenticate with 00:f6:63:9f:77:f0 (local address=9c:b6:d0:d1:6a:b1)
[34267.688728] wlp58s0: send auth to 00:f6:63:9f:77:f0 (try 1/3)
[34267.699394] wlp58s0: send auth to 00:f6:63:9f:77:f0 (try 2/3)
[34267.703699] wlp58s0: send auth to 00:f6:63:9f:77:f0 (try 3/3)
[34267.708564] wlp58s0: authentication with 00:f6:63:9f:77:f0 timed out
[34273.624985] wlp58s0: authenticate with 00:f6:63:9f:77:ff (local address=9c:b6:d0:d1:6a:b1)
[34273.624997] wlp58s0: send auth to 00:f6:63:9f:77:ff (try 1/3)
[34273.626134] wlp58s0: send auth to 00:f6:63:9f:77:ff (try 2/3)
[34273.628273] wlp58s0: send auth to 00:f6:63:9f:77:ff (try 3/3)
[34273.629388] wlp58s0: authentication with 00:f6:63:9f:77:ff timed out
[34293.933574] wlp58s0: authenticate with 00:f6:63:af:fb:0f (local address=9c:b6:d0:d1:6a:b1)
[34293.933625] wlp58s0: send auth to 00:f6:63:af:fb:0f (try 1/3)
[34293.934335] wlp58s0: authenticated
[34293.937690] wlp58s0: associate with 00:f6:63:af:fb:0f (try 1/3)
[34293.939562] wlp58s0: RX AssocResp from 00:f6:63:af:fb:0f (capab=0x101 status=0 aid=19)
[34293.942950] wlp58s0: associated
[34294.004805] wlp58s0: Limiting TX power to 17 dBm as advertised by 00:f6:63:af:fb:0f
[34331.286004] wlp58s0: disconnect from AP 00:f6:63:af:fb:0f for new auth to 00:f6:63:9f:3c:9f
[34331.451381] wlp58s0: authenticate with 00:f6:63:9f:3c:9f (local address=9c:b6:d0:d1:6a:b1)
[34331.451407] wlp58s0: send auth to 00:f6:63:9f:3c:9f (try 1/3)
[34331.452147] wlp58s0: authenticated
[34331.482995] wlp58s0: associate with 00:f6:63:9f:3c:9f (try 1/3)
[34331.484731] wlp58s0: RX ReassocResp from 00:f6:63:9f:3c:9f (capab=0x101 status=0 aid=138)
[34331.487772] wlp58s0: associated
[34331.516969] wlp58s0: Limiting TX power to 17 dBm as advertised by 00:f6:63:9f:3c:9f
[34346.789298] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[34346.796901] wlp58s0: Connection to AP 00:00:00:00:00:00 lost
[34347.690092] wlp58s0: authenticate with 00:f6:63:af:fb:0f (local address=9c:b6:d0:d1:6a:b1)
[34347.690116] wlp58s0: send auth to 00:f6:63:af:fb:0f (try 1/3)
[34347.691267] wlp58s0: send auth to 00:f6:63:af:fb:0f (try 2/3)
[34347.692488] wlp58s0: send auth to 00:f6:63:af:fb:0f (try 3/3)
[34347.693730] wlp58s0: authentication with 00:f6:63:af:fb:0f timed out
[34348.638068] wlp58s0: authenticate with 00:f6:63:cb:fe:4f (local address=9c:b6:d0:d1:6a:b1)
[34348.638092] wlp58s0: send auth to 00:f6:63:cb:fe:4f (try 1/3)
[34348.639252] wlp58s0: send auth to 00:f6:63:cb:fe:4f (try 2/3)
[34348.640436] wlp58s0: send auth to 00:f6:63:cb:fe:4f (try 3/3)
[34348.641683] wlp58s0: authentication with 00:f6:63:cb:fe:4f timed out
[34349.967973] wlp58s0: authenticate with 00:f6:63:9f:3c:90 (local address=9c:b6:d0:d1:6a:b1)
[34349.967993] wlp58s0: send auth to 00:f6:63:9f:3c:90 (try 1/3)
[34349.970895] wlp58s0: send auth to 00:f6:63:9f:3c:90 (try 2/3)
[34349.975684] wlp58s0: send auth to 00:f6:63:9f:3c:90 (try 3/3)
[34349.978703] wlp58s0: authentication with 00:f6:63:9f:3c:90 timed out
[34425.503193] wlp58s0: authenticate with 4c:a6:4d:7c:ee:2f (local address=9c:b6:d0:d1:6a:b1)
[34425.503217] wlp58s0: send auth to 4c:a6:4d:7c:ee:2f (try 1/3)
[34425.504494] wlp58s0: authenticated
[34425.512783] wlp58s0: associate with 4c:a6:4d:7c:ee:2f (try 1/3)
[34425.517675] wlp58s0: RX AssocResp from 4c:a6:4d:7c:ee:2f (capab=0x101 status=0 aid=122)
[34425.521044] wlp58s0: associated
[34425.536832] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 4c:a6:4d:7c:ee:2f
[34451.635459] wlp58s0: disconnect from AP 4c:a6:4d:7c:ee:2f for new auth to 4c:a6:4d:7b:fd:8f
[34456.868523] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[34456.911772] wlp58s0: authenticate with 4c:a6:4d:7b:fd:8f (local address=9c:b6:d0:d1:6a:b1)
[34456.911779] wlp58s0: send auth to 4c:a6:4d:7b:fd:8f (try 1/3)
[34456.913008] wlp58s0: send auth to 4c:a6:4d:7b:fd:8f (try 2/3)
[34456.914396] wlp58s0: send auth to 4c:a6:4d:7b:fd:8f (try 3/3)
[34456.915532] wlp58s0: authentication with 4c:a6:4d:7b:fd:8f timed out
[34457.614200] wlp58s0: authenticate with 4c:a6:4d:7c:ee:2f (local address=9c:b6:d0:d1:6a:b1)
[34457.614207] wlp58s0: send auth to 4c:a6:4d:7c:ee:2f (try 1/3)
[34457.615291] wlp58s0: send auth to 4c:a6:4d:7c:ee:2f (try 2/3)
[34457.616373] wlp58s0: send auth to 4c:a6:4d:7c:ee:2f (try 3/3)
[34457.617442] wlp58s0: authentication with 4c:a6:4d:7c:ee:2f timed out
[34458.506436] wlp58s0: authenticate with 4c:a6:4d:7c:f2:0f (local address=9c:b6:d0:d1:6a:b1)
[34458.506443] wlp58s0: send auth to 4c:a6:4d:7c:f2:0f (try 1/3)
[34458.507455] wlp58s0: send auth to 4c:a6:4d:7c:f2:0f (try 2/3)
[34458.508565] wlp58s0: send auth to 4c:a6:4d:7c:f2:0f (try 3/3)
[34458.509645] wlp58s0: authentication with 4c:a6:4d:7c:f2:0f timed out
[34498.744661] wlp58s0: authenticate with 00:81:c4:91:2e:5f (local address=9c:b6:d0:d1:6a:b1)
[34498.744678] wlp58s0: send auth to 00:81:c4:91:2e:5f (try 1/3)
[34498.745347] wlp58s0: authenticated
[34498.752444] wlp58s0: associate with 00:81:c4:91:2e:5f (try 1/3)
[34498.754418] wlp58s0: RX AssocResp from 00:81:c4:91:2e:5f (capab=0x101 status=0 aid=11)
[34498.757414] wlp58s0: associated
[34498.796159] wlp58s0: Limiting TX power to 17 dBm as advertised by 00:81:c4:91:2e:5f
[34509.215440] wlp58s0: deauthenticating from 00:81:c4:91:2e:5f by local choice (Reason: 3=DEAUTH_LEAVING)
[34518.487662] wlp58s0: authenticate with 00:81:c4:f6:25:7f (local address=9c:b6:d0:d1:6a:b1)
[34518.487683] wlp58s0: send auth to 00:81:c4:f6:25:7f (try 1/3)
[34518.488340] wlp58s0: authenticated
[34518.492192] wlp58s0: associate with 00:81:c4:f6:25:7f (try 1/3)
[34518.493873] wlp58s0: RX AssocResp from 00:81:c4:f6:25:7f (capab=0x101 status=0 aid=197)
[34518.496812] wlp58s0: associated
[34518.521565] wlp58s0: Limiting TX power to 17 dBm as advertised by 00:81:c4:f6:25:7f
[34542.737602] wlp58s0: disconnect from AP 00:81:c4:f6:25:7f for new auth to 00:81:c4:e7:18:1f
[34548.004082] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[34548.048666] wlp58s0: authenticate with 00:81:c4:e7:18:1f (local address=9c:b6:d0:d1:6a:b1)
[34548.048689] wlp58s0: send auth to 00:81:c4:e7:18:1f (try 1/3)
[34548.049898] wlp58s0: send auth to 00:81:c4:e7:18:1f (try 2/3)
[34548.051108] wlp58s0: send auth to 00:81:c4:e7:18:1f (try 3/3)
[34548.056045] wlp58s0: authentication with 00:81:c4:e7:18:1f timed out
[34548.915417] wlp58s0: authenticate with 00:81:c4:f6:25:7f (local address=9c:b6:d0:d1:6a:b1)
[34548.915441] wlp58s0: send auth to 00:81:c4:f6:25:7f (try 1/3)
[34548.916637] wlp58s0: send auth to 00:81:c4:f6:25:7f (try 2/3)
[34548.917780] wlp58s0: send auth to 00:81:c4:f6:25:7f (try 3/3)
[34548.918929] wlp58s0: authentication with 00:81:c4:f6:25:7f timed out
[34589.411100] wlp58s0: authenticate with 00:81:c4:91:2f:6f (local address=9c:b6:d0:d1:6a:b1)
[34589.411116] wlp58s0: send auth to 00:81:c4:91:2f:6f (try 1/3)
[34589.411838] wlp58s0: authenticated
[34589.415719] wlp58s0: associate with 00:81:c4:91:2f:6f (try 1/3)
[34589.417593] wlp58s0: RX AssocResp from 00:81:c4:91:2f:6f (capab=0x101 status=0 aid=100)
[34589.420486] wlp58s0: associated
[34589.517378] wlp58s0: Limiting TX power to 17 dBm as advertised by 00:81:c4:91:2f:6f
[34610.796168] wlp58s0: deauthenticating from 00:81:c4:91:2f:6f by local choice (Reason: 3=DEAUTH_LEAVING)
[34668.836355] wlp58s0: authenticate with 00:81:c4:7c:ca:af (local address=9c:b6:d0:d1:6a:b1)
[34668.836372] wlp58s0: send auth to 00:81:c4:7c:ca:af (try 1/3)
[34668.837047] wlp58s0: authenticated
[34668.843191] wlp58s0: associate with 00:81:c4:7c:ca:af (try 1/3)
[34668.844985] wlp58s0: RX AssocResp from 00:81:c4:7c:ca:af (capab=0x101 status=0 aid=18)
[34668.848335] wlp58s0: associated
[34668.873294] wlp58s0: Limiting TX power to 17 dBm as advertised by 00:81:c4:7c:ca:af
[34678.667562] wlp58s0: deauthenticating from 00:81:c4:7c:ca:af by local choice (Reason: 3=DEAUTH_LEAVING)
[34683.683088] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[34683.690090] wlp58s0: Connection to AP 00:00:00:00:00:00 lost
[34738.987431] wlp58s0: authenticate with 00:81:c4:93:c6:ef (local address=9c:b6:d0:d1:6a:b1)
[34738.987446] wlp58s0: send auth to 00:81:c4:93:c6:ef (try 1/3)
[34738.988375] wlp58s0: authenticated
[34738.990687] wlp58s0: associate with 00:81:c4:93:c6:ef (try 1/3)
[34738.992405] wlp58s0: RX AssocResp from 00:81:c4:93:c6:ef (capab=0x101 status=0 aid=25)
[34738.995650] wlp58s0: associated
[34739.068412] wlp58s0: Limiting TX power to 17 dBm as advertised by 00:81:c4:93:c6:ef
[34763.956494] wlp58s0: disconnect from AP 00:81:c4:93:c6:ef for new auth to 00:81:c4:91:06:7f
[34769.186464] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[34769.226313] wlp58s0: authenticate with 00:81:c4:91:06:7f (local address=9c:b6:d0:d1:6a:b1)
[34769.226319] wlp58s0: send auth to 00:81:c4:91:06:7f (try 1/3)
[34769.227447] wlp58s0: send auth to 00:81:c4:91:06:7f (try 2/3)
[34769.228592] wlp58s0: send auth to 00:81:c4:91:06:7f (try 3/3)
[34769.229725] wlp58s0: authentication with 00:81:c4:91:06:7f timed out
[34769.994103] wlp58s0: authenticate with 00:81:c4:91:06:70 (local address=9c:b6:d0:d1:6a:b1)
[34769.994123] wlp58s0: send auth to 00:81:c4:91:06:70 (try 1/3)
[34769.996021] wlp58s0: send auth to 00:81:c4:91:06:70 (try 2/3)
[34769.997828] wlp58s0: send auth to 00:81:c4:91:06:70 (try 3/3)
[34769.999377] wlp58s0: authentication with 00:81:c4:91:06:70 timed out
[34771.102500] wlp58s0: authenticate with 00:81:c4:90:cf:4f (local address=9c:b6:d0:d1:6a:b1)
[34771.102520] wlp58s0: send auth to 00:81:c4:90:cf:4f (try 1/3)
[34771.103883] wlp58s0: send auth to 00:81:c4:90:cf:4f (try 2/3)
[34771.105167] wlp58s0: send auth to 00:81:c4:90:cf:4f (try 3/3)
[34771.106359] wlp58s0: authentication with 00:81:c4:90:cf:4f timed out
[34772.354366] wlp58s0: authenticate with 00:81:c4:93:c6:ef (local address=9c:b6:d0:d1:6a:b1)
[34772.354376] wlp58s0: send auth to 00:81:c4:93:c6:ef (try 1/3)
[34772.355543] wlp58s0: send auth to 00:81:c4:93:c6:ef (try 2/3)
[34772.356548] wlp58s0: send auth to 00:81:c4:93:c6:ef (try 3/3)
[34772.357729] wlp58s0: authentication with 00:81:c4:93:c6:ef timed out
[34790.078581] usb 1-1: USB disconnect, device number 8
[34790.292592] PM: suspend entry (deep)
[34790.346991] Filesystems sync: 0.054 seconds
[34790.360415] Freezing user space processes
[34790.362893] Freezing user space processes completed (elapsed 0.002 seconds)
[34790.362906] OOM killer disabled.
[34790.362909] Freezing remaining freezable tasks
[34790.364961] Freezing remaining freezable tasks completed (elapsed 0.002 seconds)
[34790.365093] printk: Suspending console(s) (use no_console_suspend to debug)
[34790.961132] ACPI: EC: interrupt blocked
[34790.989733] ACPI: PM: Preparing to enter system sleep state S3
[34791.000753] ACPI: EC: event blocked
[34791.000758] ACPI: EC: EC stopped
[34791.000760] ACPI: PM: Saving platform NVS memory
[34791.004170] Disabling non-boot CPUs ...
[34791.006207] smpboot: CPU 3 is now offline
[34791.009674] smpboot: CPU 2 is now offline
[34791.013586] smpboot: CPU 1 is now offline
[34791.018761] ACPI: PM: Low-level resume complete
[34791.018806] ACPI: EC: EC started
[34791.018806] ACPI: PM: Restoring platform NVS memory
[34791.020710] Enabling non-boot CPUs ...
[34791.020740] smpboot: Booting Node 0 Processor 1 APIC 0x2
[34791.021436] CPU1 is up
[34791.021451] smpboot: Booting Node 0 Processor 2 APIC 0x1
[34791.022188] CPU2 is up
[34791.022205] smpboot: Booting Node 0 Processor 3 APIC 0x3
[34791.022879] CPU3 is up
[34791.025717] ACPI: PM: Waking up from system sleep state S3
[34791.072697] ACPI: EC: interrupt unblocked
[34791.088129] ACPI: EC: event unblocked
[34791.090501] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[34791.090510] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[34791.103137] nvme nvme0: 4/0/0 default/read/poll queues
[34791.115180] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[34791.115184] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[34791.115185] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[34791.332574] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[34791.340720] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[34791.497044] atkbd_receive_byte: 3 callbacks suppressed
[34791.497048] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[34791.600793] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[34791.856791] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[34791.996331] OOM killer enabled.
[34791.996335] Restarting tasks ... done.
[34792.004337] random: crng reseeded on system resumption
[34792.119511] PM: suspend exit
[34792.202521] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[34792.202545] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[34792.520607] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[34792.561049] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[34792.586443] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[34792.947262] traps: fwupd[2133] trap int3 ip:7fc2101e6cda sp:7ffc5cb592b0 error:0 in libglib-2.0.so.0.8303.0[65cda,7fc21019f000+a1000]
[36693.756567] PM: suspend entry (deep)
[36693.763733] Filesystems sync: 0.007 seconds
[36693.767148] Freezing user space processes
[36693.768862] Freezing user space processes completed (elapsed 0.001 seconds)
[36693.768866] OOM killer disabled.
[36693.768867] Freezing remaining freezable tasks
[36693.770456] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[36693.770555] printk: Suspending console(s) (use no_console_suspend to debug)
[36694.362760] ACPI: EC: interrupt blocked
[36694.390908] ACPI: PM: Preparing to enter system sleep state S3
[36694.400365] ACPI: EC: event blocked
[36694.400369] ACPI: EC: EC stopped
[36694.400371] ACPI: PM: Saving platform NVS memory
[36694.403567] Disabling non-boot CPUs ...
[36694.405487] smpboot: CPU 3 is now offline
[36694.409621] smpboot: CPU 2 is now offline
[36694.413531] smpboot: CPU 1 is now offline
[36694.420679] ACPI: PM: Low-level resume complete
[36694.420725] ACPI: EC: EC started
[36694.420725] ACPI: PM: Restoring platform NVS memory
[36694.422590] Enabling non-boot CPUs ...
[36694.422615] smpboot: Booting Node 0 Processor 1 APIC 0x2
[36694.423307] CPU1 is up
[36694.423323] smpboot: Booting Node 0 Processor 2 APIC 0x1
[36694.424044] CPU2 is up
[36694.424060] smpboot: Booting Node 0 Processor 3 APIC 0x3
[36694.424727] CPU3 is up
[36694.427548] ACPI: PM: Waking up from system sleep state S3
[36694.456866] ACPI: EC: interrupt unblocked
[36694.472727] ACPI: EC: event unblocked
[36694.475054] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[36694.475065] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[36694.485246] nvme nvme0: 4/0/0 default/read/poll queues
[36694.502398] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[36694.502402] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[36694.502404] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[36694.715855] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[36694.724070] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[36694.885765] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[36694.979996] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[36695.236068] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[36695.438178] OOM killer enabled.
[36695.438182] Restarting tasks ... done.
[36695.439747] random: crng reseeded on system resumption
[36695.567838] PM: suspend exit
[36695.644107] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[36695.644122] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[36695.925131] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[36696.007994] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[36696.033682] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[36707.389851] pci 0000:01:00.0: [8086:1576] type 01 class 0x060400 PCIe Switch Upstream Port
[36707.389929] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[36707.389956] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[36707.389985] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[36707.390015] pci 0000:01:00.0: enabling Extended Tags
[36707.390214] pci 0000:01:00.0: supports D1 D2
[36707.390222] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[36707.390367] pci 0000:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[36707.392784] pci 0000:02:00.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[36707.392857] pci 0000:02:00.0: PCI bridge to [bus 03]
[36707.392886] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[36707.392940] pci 0000:02:00.0: enabling Extended Tags
[36707.393144] pci 0000:02:00.0: supports D1 D2
[36707.393153] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[36707.396824] pci 0000:02:01.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[36707.396908] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[36707.396938] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[36707.396971] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[36707.397011] pci 0000:02:01.0: enabling Extended Tags
[36707.397246] pci 0000:02:01.0: supports D1 D2
[36707.397256] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[36707.398185] pci 0000:02:02.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[36707.398262] pci 0000:02:02.0: PCI bridge to [bus 39]
[36707.398290] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[36707.398352] pci 0000:02:02.0: enabling Extended Tags
[36707.398573] pci 0000:02:02.0: supports D1 D2
[36707.398583] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[36707.405080] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[36707.406127] pci 0000:02:00.0: PCI bridge to [bus 03]
[36707.406320] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[36707.406629] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330 PCIe Endpoint
[36707.406750] pci 0000:39:00.0: BAR 0 [mem 0xd9f00000-0xd9f0ffff]
[36707.406797] pci 0000:39:00.0: enabling Extended Tags
[36707.408417] pci 0000:39:00.0: supports D1 D2
[36707.408431] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[36707.409201] pci 0000:02:02.0: PCI bridge to [bus 39]
[36707.409300] pci_bus 0000:02: Allocating resources
[36707.409341] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[36707.409358] pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[36707.409371] pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[36707.409388] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[36707.409405] pci 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[36707.409416] pci 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[36707.409427] pci 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[36707.409436] pci 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[36707.409458] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[36707.409468] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[36707.409478] pci 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[36707.409486] pci 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[36707.409494] pci 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[36707.409501] pci 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[36707.409515] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[36707.409523] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[36707.409532] pci 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[36707.409541] pci 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[36707.409549] pci 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[36707.409557] pci 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[36707.409569] pci 0000:02:00.0: PCI bridge to [bus 03]
[36707.409586] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[36707.409612] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[36707.409627] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[36707.409641] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[36707.409663] pci 0000:02:02.0: PCI bridge to [bus 39]
[36707.409677] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[36707.409700] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[36707.409714] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[36707.409728] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[36707.424728] xhci_hcd 0000:39:00.0: xHCI Host Controller
[36707.424764] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[36707.426055] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[36707.426950] xhci_hcd 0000:39:00.0: xHCI Host Controller
[36707.426973] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[36707.426990] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[36707.427148] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[36707.427164] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[36707.427173] usb usb3: Product: xHCI Host Controller
[36707.427180] usb usb3: Manufacturer: Linux 6.14.0-rc3-00060-g6537cfb395f3 xhci-hcd
[36707.427188] usb usb3: SerialNumber: 0000:39:00.0
[36707.428111] hub 3-0:1.0: USB hub found
[36707.428155] hub 3-0:1.0: 2 ports detected
[36707.434731] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[36707.434751] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[36707.434763] usb usb4: Product: xHCI Host Controller
[36707.434770] usb usb4: Manufacturer: Linux 6.14.0-rc3-00060-g6537cfb395f3 xhci-hcd
[36707.434777] usb usb4: SerialNumber: 0000:39:00.0
[36707.435371] hub 4-0:1.0: USB hub found
[36707.435411] hub 4-0:1.0: 2 ports detected
[36707.439085] pci_bus 0000:02: Allocating resources
[36707.439136] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[36707.439155] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[36707.439169] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[36707.439185] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[36707.439201] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[36707.439211] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[36707.439220] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[36707.439227] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[36707.439247] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[36707.439258] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[36707.439265] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[36707.439274] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[36707.439283] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[36707.439288] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[36707.439304] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[36707.439311] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[36707.439320] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[36707.439329] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[36707.439337] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[36707.439345] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[36707.679809] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[36707.822232] usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3
[36707.822249] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[36707.822256] usb 3-1: Product: USB2.0 Hub
[36707.822262] usb 3-1: Manufacturer: VIA Labs, Inc.
[36707.822267] usb 3-1: SerialNumber: 000000000
[36707.824442] hub 3-1:1.0: USB hub found
[36707.824557] hub 3-1:1.0: 5 ports detected
[36707.947756] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[36707.992786] usb 4-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[36707.992810] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[36707.992820] usb 4-1: Product: USB3.0 Hub
[36707.992829] usb 4-1: Manufacturer: VIA Labs, Inc.
[36707.992838] usb 4-1: SerialNumber: 000000000
[36707.997182] hub 4-1:1.0: USB hub found
[36707.997328] hub 4-1:1.0: 4 ports detected
[36708.547741] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd
[36708.686358] usb 3-1.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4
[36708.686375] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[36708.686391] usb 3-1.1: Product: USB2.0 Hub
[36708.686397] usb 3-1.1: Manufacturer: VIA Labs, Inc.
[36708.686402] usb 3-1.1: SerialNumber: 000000000
[36708.688624] hub 3-1.1:1.0: USB hub found
[36708.688892] hub 3-1.1:1.0: 4 ports detected
[36708.782425] usb 4-1.1: new SuperSpeed USB device number 3 using xhci_hcd
[36708.841546] usb 4-1.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[36708.841566] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[36708.841574] usb 4-1.1: Product: USB3.0 Hub
[36708.841582] usb 4-1.1: Manufacturer: VIA Labs, Inc.
[36708.841588] usb 4-1.1: SerialNumber: 000000000
[36708.843829] hub 4-1.1:1.0: USB hub found
[36708.844097] hub 4-1.1:1.0: 4 ports detected
[36708.912236] usb 3-1.5: new high-speed USB device number 4 using xhci_hcd
[36709.001403] usb 3-1.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[36709.001430] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[36709.001437] usb 3-1.5: Product: USB Billboard Device
[36709.001452] usb 3-1.5: Manufacturer: VIA Labs, Inc.
[36709.001457] usb 3-1.5: SerialNumber: 0000000000000001
[36709.079839] usb 4-1.4: new SuperSpeed USB device number 4 using xhci_hcd
[36709.097776] usb 4-1.4: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00
[36709.097787] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[36709.097792] usb 4-1.4: Product: Mass Storage Device
[36709.097795] usb 4-1.4: Manufacturer: Generic
[36709.097799] usb 4-1.4: SerialNumber: 058F84688461
[36709.105645] usb-storage 4-1.4:1.0: USB Mass Storage device detected
[36709.105940] scsi host0: usb-storage 4-1.4:1.0
[36709.363728] usb 3-1.1.3: new high-speed USB device number 5 using xhci_hcd
[36710.095882] usb 4-1.1.3: new SuperSpeed USB device number 5 using xhci_hcd
[36710.113035] usb 4-1.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[36710.113050] usb 4-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[36710.113065] usb 4-1.1.3: Product: USB 10/100/1000 LAN
[36710.113071] usb 4-1.1.3: Manufacturer: Realtek
[36710.113085] usb 4-1.1.3: SerialNumber: 000001
[36710.116927] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6
[36710.120220] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6
[36710.120914] sd 0:0:0:0: [sda] Media removed, stopped polling
[36710.121525] sd 0:0:0:1: [sdb] Media removed, stopped polling
[36710.122809] sd 0:0:0:0: [sda] Attached SCSI removable disk
[36710.123171] sd 0:0:0:1: [sdb] Attached SCSI removable disk
[36710.188583] r8152-cfgselector 4-1.1.3: reset SuperSpeed USB device number 5 using xhci_hcd
[36710.268637] r8152 4-1.1.3:1.0 eth0: v1.12.13
[36710.378187] r8152 4-1.1.3:1.0 enx00e04ceb9e75: renamed from eth0
[36713.908477] r8152 4-1.1.3:1.0 enx00e04ceb9e75: carrier on
[36983.193017] systemd-sysv-generator[40724]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[36983.193025] systemd-sysv-generator[40724]: Please update package to include a native systemd unit file.
[36983.193027] systemd-sysv-generator[40724]: ! This compatibility logic is deprecated, expect removal soon. !
[38609.557361] dell_wmi: Unknown key with type 0x0012 and code 0x0000 pressed
[38859.905317] PM: suspend entry (deep)
[38859.919672] Filesystems sync: 0.014 seconds
[38859.926256] Freezing user space processes
[38859.928143] Freezing user space processes completed (elapsed 0.001 seconds)
[38859.928148] OOM killer disabled.
[38859.928149] Freezing remaining freezable tasks
[38859.929666] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[38859.929723] printk: Suspending console(s) (use no_console_suspend to debug)
[38860.536065] ACPI: EC: interrupt blocked
[38860.562380] ACPI: PM: Preparing to enter system sleep state S3
[38860.573401] ACPI: EC: event blocked
[38860.573406] ACPI: EC: EC stopped
[38860.573408] ACPI: PM: Saving platform NVS memory
[38860.576927] Disabling non-boot CPUs ...
[38860.578996] smpboot: CPU 3 is now offline
[38860.582987] smpboot: CPU 2 is now offline
[38860.585898] smpboot: CPU 1 is now offline
[38860.592084] ACPI: PM: Low-level resume complete
[38860.592129] ACPI: EC: EC started
[38860.592129] ACPI: PM: Restoring platform NVS memory
[38860.593997] Enabling non-boot CPUs ...
[38860.594032] smpboot: Booting Node 0 Processor 1 APIC 0x2
[38860.594773] CPU1 is up
[38860.594789] smpboot: Booting Node 0 Processor 2 APIC 0x1
[38860.595510] CPU2 is up
[38860.595526] smpboot: Booting Node 0 Processor 3 APIC 0x3
[38860.596207] CPU3 is up
[38860.599060] ACPI: PM: Waking up from system sleep state S3
[38860.895920] ACPI: EC: interrupt unblocked
[38860.907975] ACPI: EC: event unblocked
[38860.909381] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[38860.909387] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[38860.909596] xhci_hcd 0000:39:00.0: xHC error in resume, USBSTS 0x411, Reinit
[38860.909598] usb usb3: root hub lost power or was reset
[38860.909600] usb usb4: root hub lost power or was reset
[38860.923176] nvme nvme0: 4/0/0 default/read/poll queues
[38860.964027] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[38860.964031] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[38860.964032] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[38861.206729] usb 3-1: reset high-speed USB device number 2 using xhci_hcd
[38861.234889] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[38861.466456] usb 4-1: reset SuperSpeed USB device number 2 using xhci_hcd
[38861.490952] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[38861.746829] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[38862.058731] usb 3-1.1: reset high-speed USB device number 3 using xhci_hcd
[38862.266752] usb 3-1.5: reset high-speed USB device number 4 using xhci_hcd
[38862.426959] usb 4-1.1: reset SuperSpeed USB device number 3 using xhci_hcd
[38862.538861] usb 4-1.4: reset SuperSpeed USB device number 4 using xhci_hcd
[38863.130897] r8152-cfgselector 4-1.1.3: reset SuperSpeed USB device number 5 using xhci_hcd
[38863.147208] r8152-cfgselector 4-1.1.3: device firmware changed
[38863.149475] OOM killer enabled.
[38863.149478] Restarting tasks ... done.
[38863.150562] random: crng reseeded on system resumption
[38863.151159] r8152-cfgselector 4-1.1.3: USB disconnect, device number 5
[38863.152496] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[38863.175154] pci_bus 0000:02: Allocating resources
[38863.175179] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[38863.175184] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[38863.175187] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[38863.175191] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[38863.175196] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[38863.175198] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[38863.175201] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[38863.175203] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[38863.175208] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[38863.175210] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[38863.175212] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[38863.175214] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[38863.175216] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[38863.175218] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[38863.175221] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[38863.175223] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[38863.175225] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[38863.175227] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[38863.175229] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[38863.175230] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[38863.175471] pci_bus 0000:02: Allocating resources
[38863.175487] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[38863.175490] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[38863.175493] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[38863.175496] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[38863.175500] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[38863.175502] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[38863.175504] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[38863.175506] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[38863.175510] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[38863.175512] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[38863.175514] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[38863.175515] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[38863.175517] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[38863.175519] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[38863.175522] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[38863.175524] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[38863.175526] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[38863.175527] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[38863.175529] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[38863.175531] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[38863.190897] PM: suspend exit
[38863.383857] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[38863.551673] usb 4-1.1.3: new SuperSpeed USB device number 6 using xhci_hcd
[38863.567218] usb 4-1.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[38863.567225] usb 4-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[38863.567227] usb 4-1.1.3: Product: USB 10/100/1000 LAN
[38863.567229] usb 4-1.1.3: Manufacturer: Realtek
[38863.567231] usb 4-1.1.3: SerialNumber: 000001
[38863.639840] r8152-cfgselector 4-1.1.3: reset SuperSpeed USB device number 6 using xhci_hcd
[38863.699188] r8152 4-1.1.3:1.0 eth0: v1.12.13
[38863.786159] r8152 4-1.1.3:1.0 enx00e04ceb9e75: renamed from eth0
[38867.168820] r8152 4-1.1.3:1.0 enx00e04ceb9e75: carrier on
[39165.715417] PM: suspend entry (deep)
[39165.727439] Filesystems sync: 0.012 seconds
[39165.731296] Freezing user space processes
[39165.733064] Freezing user space processes completed (elapsed 0.001 seconds)
[39165.733068] OOM killer disabled.
[39165.733068] Freezing remaining freezable tasks
[39165.734585] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[39165.734631] printk: Suspending console(s) (use no_console_suspend to debug)
[39166.356125] ACPI: EC: interrupt blocked
[39166.381533] ACPI: PM: Preparing to enter system sleep state S3
[39166.393660] ACPI: EC: event blocked
[39166.393666] ACPI: EC: EC stopped
[39166.393668] ACPI: PM: Saving platform NVS memory
[39166.397161] Disabling non-boot CPUs ...
[39166.399259] smpboot: CPU 3 is now offline
[39166.405779] smpboot: CPU 2 is now offline
[39166.412899] smpboot: CPU 1 is now offline
[39166.420982] ACPI: PM: Low-level resume complete
[39166.421025] ACPI: EC: EC started
[39166.421025] ACPI: PM: Restoring platform NVS memory
[39166.422883] Enabling non-boot CPUs ...
[39166.422908] smpboot: Booting Node 0 Processor 1 APIC 0x2
[39166.423617] CPU1 is up
[39166.423633] smpboot: Booting Node 0 Processor 2 APIC 0x1
[39166.424358] CPU2 is up
[39166.424374] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39166.425080] CPU3 is up
[39166.427906] ACPI: PM: Waking up from system sleep state S3
[39166.726031] ACPI: EC: interrupt unblocked
[39166.740762] ACPI: EC: event unblocked
[39166.743137] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[39166.743146] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[39166.743600] xhci_hcd 0000:39:00.0: xHC error in resume, USBSTS 0x411, Reinit
[39166.743606] usb usb3: root hub lost power or was reset
[39166.743608] usb usb4: root hub lost power or was reset
[39166.755218] nvme nvme0: 4/0/0 default/read/poll queues
[39166.767475] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[39166.767478] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[39166.767480] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[39167.040961] usb 3-1: reset high-speed USB device number 2 using xhci_hcd
[39167.073077] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[39167.300703] usb 4-1: reset SuperSpeed USB device number 2 using xhci_hcd
[39167.329174] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[39167.585126] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[39167.872947] usb 3-1.5: reset high-speed USB device number 4 using xhci_hcd
[39168.081010] usb 3-1.1: reset high-speed USB device number 3 using xhci_hcd
[39168.311495] usb 4-1.1: reset SuperSpeed USB device number 3 using xhci_hcd
[39168.441089] usb 4-1.4: reset SuperSpeed USB device number 4 using xhci_hcd
[39169.025099] r8152-cfgselector 4-1.1.3: reset SuperSpeed USB device number 6 using xhci_hcd
[39169.044674] r8152 4-1.1.3:1.0: skip request firmware
[39169.091469] OOM killer enabled.
[39169.091473] Restarting tasks ... done.
[39169.092694] random: crng reseeded on system resumption
[39169.094470] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[39169.119985] pci_bus 0000:02: Allocating resources
[39169.120373] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[39169.120379] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[39169.120382] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[39169.120387] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[39169.120399] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[39169.120402] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[39169.120422] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[39169.120430] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[39169.120460] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[39169.120462] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[39169.120664] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[39169.120666] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[39169.120667] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[39169.120669] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[39169.121920] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[39169.121925] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[39169.121928] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[39169.121929] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[39169.121931] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[39169.121932] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[39169.122263] pci_bus 0000:02: Allocating resources
[39169.122296] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[39169.122300] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[39169.122303] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[39169.122307] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[39169.122310] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[39169.122313] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[39169.122315] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[39169.122317] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[39169.122321] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[39169.122323] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[39169.122325] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[39169.122327] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[39169.122329] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[39169.122331] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[39169.122334] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[39169.122336] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[39169.122338] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[39169.122339] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[39169.122341] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[39169.122342] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[39169.151064] PM: suspend exit
[39169.313022] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[39172.714401] r8152 4-1.1.3:1.0 enx00e04ceb9e75: carrier on
[39414.087720] sched: DL replenish lagged too much
[40535.433513] usb 3-1: USB disconnect, device number 2
[40535.433519] usb 3-1.1: USB disconnect, device number 3
[40535.434420] usb 3-1.5: USB disconnect, device number 4
[40535.508684] xhci_hcd 0000:39:00.0: xHCI host controller not responding, assume dead
[40535.508709] xhci_hcd 0000:39:00.0: HC died; cleaning up
[40535.508734] usb 4-1: USB disconnect, device number 2
[40535.508739] usb 4-1.1: USB disconnect, device number 3
[40535.508741] r8152-cfgselector 4-1.1.3: USB disconnect, device number 6
[40535.527250] xhci_hcd 0000:39:00.0: remove, state 1
[40535.527257] usb usb4: USB disconnect, device number 1
[40535.578091] usb 4-1.4: USB disconnect, device number 4
[40535.775454] xhci_hcd 0000:39:00.0: USB bus 4 deregistered
[40535.777758] xhci_hcd 0000:39:00.0: remove, state 1
[40535.777797] usb usb3: USB disconnect, device number 1
[40535.789815] xhci_hcd 0000:39:00.0: Host halt failed, -19
[40535.789854] xhci_hcd 0000:39:00.0: Host not accessible, reset failed.
[40535.791039] xhci_hcd 0000:39:00.0: USB bus 3 deregistered
[40535.859687] pci_bus 0000:02: Allocating resources
[40535.859773] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[40535.859814] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[40535.859826] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[40535.859860] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[40535.859878] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[40535.859903] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[40535.859913] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[40535.859920] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[40535.859956] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[40535.859965] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[40535.859989] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[40535.859997] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[40535.860004] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[40535.860011] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[40535.860041] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[40535.860048] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[40535.860057] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[40535.860079] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[40535.860087] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[40535.860094] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[40540.662013] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330 PCIe Endpoint
[40540.662082] pci 0000:39:00.0: BAR 0 [mem 0xd9f00000-0xd9f0ffff]
[40540.662105] pci 0000:39:00.0: enabling Extended Tags
[40540.662239] pci 0000:39:00.0: supports D1 D2
[40540.662241] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[40540.662574] pcieport 0000:02:02.0: ASPM: current common clock configuration is inconsistent, reconfiguring
[40540.662637] pci_bus 0000:02: Allocating resources
[40540.662657] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[40540.662661] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[40540.662664] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[40540.662668] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[40540.662673] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[40540.662675] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[40540.662677] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[40540.662679] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[40540.662684] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[40540.662686] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[40540.662689] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[40540.662691] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[40540.662692] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[40540.662694] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[40540.662698] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[40540.662700] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[40540.662702] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[40540.662704] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[40540.662707] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[40540.662708] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Linux warns `sched: DL replenish lagged too much`
2025-02-20 10:47 Linux warns `sched: DL replenish lagged too much` Paul Menzel
@ 2025-02-20 13:35 ` Juri Lelli
2025-02-20 20:18 ` Paul Menzel
0 siblings, 1 reply; 5+ messages in thread
From: Juri Lelli @ 2025-02-20 13:35 UTC (permalink / raw)
To: Paul Menzel; +Cc: Ingo Molnar, Peter Zijlstra, Vincent Guittot, LKML
Dear Paul,
On 20/02/25 11:47, Paul Menzel wrote:
> Dear Linux folks,
>
>
> On the Intel Kaby Lake laptop Dell XPS 13 with Linux
> 6.14.0-rc3-00060-g6537cfb395f3, waking it up from ACPI S3 with an LMP USB-C
> mini dock connected, that had an Ethernet cable and a power adapter plugged
> in, everything was lagging, and also the video in the opened Firefox Nightly
> browser lagged quite a bit. This has happened in the past, but not that bad
> and long. Today for the first time, Linux logged the warning below:
>
> sched: DL replenish lagged too much
>
> (This is from `kernel/sched/deadline.c`.)
>
> I have no idea, if it’s related to the hardware itself, that causes it to
> lag, that a suspend/resume cycle fixes, or if it’s related to the USB-C
> controller that has bugs in that early generation, or if it’s related to
> GNOME/Mutter (*mutter-common* 48~beta-3) or Firefox or the Web video player
> used by the site.
>
> As often the case with this, I have no way to reliably reproduce it, and in
> this case to reproduce the warning. I can only say, that this warning has
> not been logged in the available log files since September 2024. Linux
> “6.11-rc0” was used then. Please find the log messages attached.
>
> In case this information is not useful, should this happen again, it’d be
> great if you could suggest what and how I should collect debugging
> information next time.
Assuming no explicit usage of SCHED_DEADLINE, I would say the warning
message might be related to the recently introduced deadline servers:
5f6bd380c7bd ("sched/rt: Remove default bandwidth control") and related
commits.
They were merged in v6.12 (IIRC), though, so I would expect you had
noticed already before if they introduced issues on your setup? That
said, it might also be the case that something else changed more
recently that now triggers a corner case.
The warning message per-se it's not fatal, it just warns that the kernel
is recovering from an unexpected situation. Did you notice that things
went back to normal (no lag from a user perspective) right after that
message was printed?
Thanks,
Juri
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Linux warns `sched: DL replenish lagged too much`
2025-02-20 13:35 ` Juri Lelli
@ 2025-02-20 20:18 ` Paul Menzel
2025-02-21 22:13 ` Paul Menzel
0 siblings, 1 reply; 5+ messages in thread
From: Paul Menzel @ 2025-02-20 20:18 UTC (permalink / raw)
To: Juri Lelli; +Cc: Ingo Molnar, Peter Zijlstra, Vincent Guittot, LKML
Dear Juri,
Thank you for your quick reply.
Am 20.02.25 um 14:35 schrieb Juri Lelli:
> On 20/02/25 11:47, Paul Menzel wrote:
>> On the Intel Kaby Lake laptop Dell XPS 13 with Linux
>> 6.14.0-rc3-00060-g6537cfb395f3, waking it up from ACPI S3 with an LMP USB-C
>> mini dock connected, that had an Ethernet cable and a power adapter plugged
>> in, everything was lagging, and also the video in the opened Firefox Nightly
>> browser lagged quite a bit. This has happened in the past, but not that bad
>> and long. Today for the first time, Linux logged the warning below:
>>
>> sched: DL replenish lagged too much
>>
>> (This is from `kernel/sched/deadline.c`.)
>>
>> I have no idea, if it’s related to the hardware itself, that causes it to
>> lag, that a suspend/resume cycle fixes, or if it’s related to the USB-C
>> controller that has bugs in that early generation, or if it’s related to
>> GNOME/Mutter (*mutter-common* 48~beta-3) or Firefox or the Web video player
>> used by the site.
>>
>> As often the case with this, I have no way to reliably reproduce it, and in
>> this case to reproduce the warning. I can only say, that this warning has
>> not been logged in the available log files since September 2024. Linux
>> “6.11-rc0” was used then. Please find the log messages attached.
>>
>> In case this information is not useful, should this happen again, it’d be
>> great if you could suggest what and how I should collect debugging
>> information next time.
>
> Assuming no explicit usage of SCHED_DEADLINE, I would say the warning
> message might be related to the recently introduced deadline servers:
> 5f6bd380c7bd ("sched/rt: Remove default bandwidth control") and related
> commits.
>
> They were merged in v6.12 (IIRC), though,
Indeed, it first appeared in v6.12-rc1.
> so I would expect you had noticed already before if they introduced
> issues on your setup? That said, it might also be the case that
> something else changed more recently that now triggers a corner
> case.
On this device, I sometimes experience lags after resuming from ACPI S3,
and, although I cannot prove it, using USB-C mini docks (LMP USB-C mini
Dock [1] or Dell DA300) seems to increase the chances of hitting the
problem. Re-plugging and doing ACPI S3 suspend/resume again often helps.
> The warning message per-se it's not fatal, it just warns that the kernel
> is recovering from an unexpected situation. Did you notice that things
> went back to normal (no lag from a user perspective) right after that
> message was printed?
As far as I remember, the lagging stayed even after the log was printed.
In this case, I had to reboot the device, and until now – with no ACPI
S3 suspend/resume – it works fine.
Kind regards,
Paul
[1]: https://lmp-adapter.com/product/lmp-usb-c-mini-dock/
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Linux warns `sched: DL replenish lagged too much`
2025-02-20 20:18 ` Paul Menzel
@ 2025-02-21 22:13 ` Paul Menzel
2025-02-24 9:50 ` Juri Lelli
0 siblings, 1 reply; 5+ messages in thread
From: Paul Menzel @ 2025-02-21 22:13 UTC (permalink / raw)
To: Juri Lelli; +Cc: Ingo Molnar, Peter Zijlstra, Vincent Guittot, LKML
Dear Juri,
Am 20.02.25 um 21:18 schrieb Paul Menzel:
> Am 20.02.25 um 14:35 schrieb Juri Lelli:
>
>> On 20/02/25 11:47, Paul Menzel wrote:
>
>>> On the Intel Kaby Lake laptop Dell XPS 13 with Linux
>>> 6.14.0-rc3-00060-g6537cfb395f3, waking it up from ACPI S3 with an LMP USB-C
>>> mini dock connected, that had an Ethernet cable and a power adapter plugged
>>> in, everything was lagging, and also the video in the opened Firefox Nightly
>>> browser lagged quite a bit. This has happened in the past, but not that bad
>>> and long. Today for the first time, Linux logged the warning below:
>>>
>>> sched: DL replenish lagged too much
>>>
>>> (This is from `kernel/sched/deadline.c`.)
>>>
>>> I have no idea, if it’s related to the hardware itself, that causes it to
>>> lag, that a suspend/resume cycle fixes, or if it’s related to the USB-C
>>> controller that has bugs in that early generation, or if it’s related to
>>> GNOME/Mutter (*mutter-common* 48~beta-3) or Firefox or the Web video player
>>> used by the site.
>>>
>>> As often the case with this, I have no way to reliably reproduce it, and in
>>> this case to reproduce the warning. I can only say, that this warning has
>>> not been logged in the available log files since September 2024. Linux
>>> “6.11-rc0” was used then. Please find the log messages attached.
>>>
>>> In case this information is not useful, should this happen again, it’d be
>>> great if you could suggest what and how I should collect debugging
>>> information next time.
>>
>> Assuming no explicit usage of SCHED_DEADLINE, I would say the warning
>> message might be related to the recently introduced deadline servers:
>> 5f6bd380c7bd ("sched/rt: Remove default bandwidth control") and related
>> commits.
>>
>> They were merged in v6.12 (IIRC), though,
>
> Indeed, it first appeared in v6.12-rc1.
>
>> so I would expect you had noticed already before if they introduced
>> issues on your setup? That said, it might also be the case that
>> something else changed more recently that now triggers a corner
>> case.
>
> On this device, I sometimes experience lags after resuming from ACPI S3,
> and, although I cannot prove it, using USB-C mini docks (LMP USB-C mini
> Dock [1] or Dell DA300) seems to increase the chances of hitting the
> problem. Re-plugging and doing ACPI S3 suspend/resume again often helps.
I guess, I didn’t see this yet, as I haven’t been using the USB-C
charger with the USB-C mini dock up until now as the laptop also has a
barel jack for charging.
>> The warning message per-se it's not fatal, it just warns that the kernel
>> is recovering from an unexpected situation. Did you notice that things
>> went back to normal (no lag from a user perspective) right after that
>> message was printed?
>
> As far as I remember, the lagging stayed even after the log was printed.
> In this case, I had to reboot the device, and until now – with no ACPI
> S3 suspend/resume – it works fine.
I was able to reproduce this today. The same behavior after resuming
from ACPI S3.
Feb 21 17:20:19 abreu gnome-shell[1775]:
meta_wayland_buffer_process_damage: assertion 'buffer->resource' failed
Feb 21 17:20:19 abreu gnome-shell[1775]:
(../src/wayland/meta-wayland-buffer.c:709):meta_wayland_buffer_inc_use_count:
runtime check failed: (buffer->resource)
Feb 21 17:20:21 abreu rtkit-daemon[1017]: Supervising 7 threads of
5 processes of 1 users.
Feb 21 17:20:21 abreu rtkit-daemon[1017]: Supervising 7 threads of
5 processes of 1 users.
Feb 21 17:20:59 abreu kernel: sched: DL replenish lagged too much
Feb 21 17:21:01 abreu systemd[1588]: Started
app-gnome-ptyxis-26577.scope - Application launched by gsd-media-keys.
[…]
Feb 21 17:23:43 abreu gnome-shell[1775]: libinput error: event11 -
DLL075B:01 06CB:76AF Touchpad: client bug: event processing lagging
behind by 31ms, your system is too slow
Move lags sometimes, and also switching GNOME virtual desktops, or just
opening a new window takes several seconds.
Can I set an option so more stuff is logged, once the scheduler warning
is logged?
Kind regards,
Paul
> [1]: https://lmp-adapter.com/product/lmp-usb-c-mini-dock/
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Linux warns `sched: DL replenish lagged too much`
2025-02-21 22:13 ` Paul Menzel
@ 2025-02-24 9:50 ` Juri Lelli
0 siblings, 0 replies; 5+ messages in thread
From: Juri Lelli @ 2025-02-24 9:50 UTC (permalink / raw)
To: Paul Menzel; +Cc: Ingo Molnar, Peter Zijlstra, Vincent Guittot, LKML
On 21/02/25 23:13, Paul Menzel wrote:
> Dear Juri,
>
> Am 20.02.25 um 21:18 schrieb Paul Menzel:
...
> I was able to reproduce this today. The same behavior after resuming from
> ACPI S3.
>
> Feb 21 17:20:19 abreu gnome-shell[1775]:
> meta_wayland_buffer_process_damage: assertion 'buffer->resource' failed
> Feb 21 17:20:19 abreu gnome-shell[1775]:
> (../src/wayland/meta-wayland-buffer.c:709):meta_wayland_buffer_inc_use_count:
> runtime check failed: (buffer->resource)
> Feb 21 17:20:21 abreu rtkit-daemon[1017]: Supervising 7 threads of 5
> processes of 1 users.
> Feb 21 17:20:21 abreu rtkit-daemon[1017]: Supervising 7 threads of 5
> processes of 1 users.
> Feb 21 17:20:59 abreu kernel: sched: DL replenish lagged too much
> Feb 21 17:21:01 abreu systemd[1588]: Started
> app-gnome-ptyxis-26577.scope - Application launched by gsd-media-keys.
> […]
> Feb 21 17:23:43 abreu gnome-shell[1775]: libinput error: event11 -
> DLL075B:01 06CB:76AF Touchpad: client bug: event processing lagging behind
> by 31ms, your system is too slow
>
> Move lags sometimes, and also switching GNOME virtual desktops, or just
> opening a new window takes several seconds.
>
> Can I set an option so more stuff is logged, once the scheduler warning is
> logged?
Could you please first try to reproduce after having disabled the fair
deadline server with something like the following?
# for ((i=0; i<$(nproc); i++)); do echo 0 > /sys/kernel/debug/sched/fair_server/cpu$i/runtime; done
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2025-02-24 9:50 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-02-20 10:47 Linux warns `sched: DL replenish lagged too much` Paul Menzel
2025-02-20 13:35 ` Juri Lelli
2025-02-20 20:18 ` Paul Menzel
2025-02-21 22:13 ` Paul Menzel
2025-02-24 9:50 ` Juri Lelli
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®