mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Roman Gushchin <roman.gushchin@linux.dev>
To: netdev@vger.kernel.org, Jakub Kicinski <kuba@kernel.org>,
	"David S. Miller" <davem@davemloft.net>
Cc: linux-kernel@vger.kernel.org, Rafal Ozieblo <rafalo@cadence.com>,
	Lars-Peter Clausen <lars@metafoo.de>
Subject: Re: [PATCH net] net: macb: fix a memory corruption in extended buffer descriptor mode
Date: Tue, 11 Apr 2023 11:20:34 -0700	[thread overview]
Message-ID: <ZDWk8vjvk7HO4I7o@P9FQF9L96D.corp.robot.car> (raw)
In-Reply-To: <20230407172402.103168-1-roman.gushchin@linux.dev>

Friendly ping.

Also cc'ing Dave.

Thanks!

On Fri, Apr 07, 2023 at 10:24:02AM -0700, Roman Gushchin wrote:
> For quite some time we were chasing a bug which looked like a sudden
> permanent failure of networking and mmc on some of our devices.
> The bug was very sensitive to any software changes and even more to
> any kernel debug options.
> 
> Finally we got a setup where the problem was reproducible with
> CONFIG_DMA_API_DEBUG=y and it revealed the issue with the rx dma:
> 
> [   16.992082] ------------[ cut here ]------------
> [   16.996779] DMA-API: macb ff0b0000.ethernet: device driver tries to free DMA memory it has not allocated [device address=0x0000000875e3e244] [size=1536 bytes]
> [   17.011049] WARNING: CPU: 0 PID: 85 at kernel/dma/debug.c:1011 check_unmap+0x6a0/0x900
> [   17.018977] Modules linked in: xxxxx
> [   17.038823] CPU: 0 PID: 85 Comm: irq/55-8000f000 Not tainted 5.4.0 #28
> [   17.045345] Hardware name: xxxxx
> [   17.049528] pstate: 60000005 (nZCv daif -PAN -UAO)
> [   17.054322] pc : check_unmap+0x6a0/0x900
> [   17.058243] lr : check_unmap+0x6a0/0x900
> [   17.062163] sp : ffffffc010003c40
> [   17.065470] x29: ffffffc010003c40 x28: 000000004000c03c
> [   17.070783] x27: ffffffc010da7048 x26: ffffff8878e38800
> [   17.076095] x25: ffffff8879d22810 x24: ffffffc010003cc8
> [   17.081407] x23: 0000000000000000 x22: ffffffc010a08750
> [   17.086719] x21: ffffff8878e3c7c0 x20: ffffffc010acb000
> [   17.092032] x19: 0000000875e3e244 x18: 0000000000000010
> [   17.097343] x17: 0000000000000000 x16: 0000000000000000
> [   17.102647] x15: ffffff8879e4a988 x14: 0720072007200720
> [   17.107959] x13: 0720072007200720 x12: 0720072007200720
> [   17.113261] x11: 0720072007200720 x10: 0720072007200720
> [   17.118565] x9 : 0720072007200720 x8 : 000000000000022d
> [   17.123869] x7 : 0000000000000015 x6 : 0000000000000098
> [   17.129173] x5 : 0000000000000000 x4 : 0000000000000000
> [   17.134475] x3 : 00000000ffffffff x2 : ffffffc010a1d370
> [   17.139778] x1 : b420c9d75d27bb00 x0 : 0000000000000000
> [   17.145082] Call trace:
> [   17.147524]  check_unmap+0x6a0/0x900
> [   17.151091]  debug_dma_unmap_page+0x88/0x90
> [   17.155266]  gem_rx+0x114/0x2f0
> [   17.158396]  macb_poll+0x58/0x100
> [   17.161705]  net_rx_action+0x118/0x400
> [   17.165445]  __do_softirq+0x138/0x36c
> [   17.169100]  irq_exit+0x98/0xc0
> [   17.172234]  __handle_domain_irq+0x64/0xc0
> [   17.176320]  gic_handle_irq+0x5c/0xc0
> [   17.179974]  el1_irq+0xb8/0x140
> [   17.183109]  xiic_process+0x5c/0xe30
> [   17.186677]  irq_thread_fn+0x28/0x90
> [   17.190244]  irq_thread+0x208/0x2a0
> [   17.193724]  kthread+0x130/0x140
> [   17.196945]  ret_from_fork+0x10/0x20
> [   17.200510] ---[ end trace 7240980785f81d6f ]---
> 
> [  237.021490] ------------[ cut here ]------------
> [  237.026129] DMA-API: exceeded 7 overlapping mappings of cacheline 0x0000000021d79e7b
> [  237.033886] WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:499 add_dma_entry+0x214/0x240
> [  237.041802] Modules linked in: xxxxx
> [  237.061637] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W         5.4.0 #28
> [  237.068941] Hardware name: xxxxx
> [  237.073116] pstate: 80000085 (Nzcv daIf -PAN -UAO)
> [  237.077900] pc : add_dma_entry+0x214/0x240
> [  237.081986] lr : add_dma_entry+0x214/0x240
> [  237.086072] sp : ffffffc010003c30
> [  237.089379] x29: ffffffc010003c30 x28: ffffff8878a0be00
> [  237.094683] x27: 0000000000000180 x26: ffffff8878e387c0
> [  237.099987] x25: 0000000000000002 x24: 0000000000000000
> [  237.105290] x23: 000000000000003b x22: ffffffc010a0fa00
> [  237.110594] x21: 0000000021d79e7b x20: ffffffc010abe600
> [  237.115897] x19: 00000000ffffffef x18: 0000000000000010
> [  237.121201] x17: 0000000000000000 x16: 0000000000000000
> [  237.126504] x15: ffffffc010a0fdc8 x14: 0720072007200720
> [  237.131807] x13: 0720072007200720 x12: 0720072007200720
> [  237.137111] x11: 0720072007200720 x10: 0720072007200720
> [  237.142415] x9 : 0720072007200720 x8 : 0000000000000259
> [  237.147718] x7 : 0000000000000001 x6 : 0000000000000000
> [  237.153022] x5 : ffffffc010003a20 x4 : 0000000000000001
> [  237.158325] x3 : 0000000000000006 x2 : 0000000000000007
> [  237.163628] x1 : 8ac721b3a7dc1c00 x0 : 0000000000000000
> [  237.168932] Call trace:
> [  237.171373]  add_dma_entry+0x214/0x240
> [  237.175115]  debug_dma_map_page+0xf8/0x120
> [  237.179203]  gem_rx_refill+0x190/0x280
> [  237.182942]  gem_rx+0x224/0x2f0
> [  237.186075]  macb_poll+0x58/0x100
> [  237.189384]  net_rx_action+0x118/0x400
> [  237.193125]  __do_softirq+0x138/0x36c
> [  237.196780]  irq_exit+0x98/0xc0
> [  237.199914]  __handle_domain_irq+0x64/0xc0
> [  237.204000]  gic_handle_irq+0x5c/0xc0
> [  237.207654]  el1_irq+0xb8/0x140
> [  237.210789]  arch_cpu_idle+0x40/0x200
> [  237.214444]  default_idle_call+0x18/0x30
> [  237.218359]  do_idle+0x200/0x280
> [  237.221578]  cpu_startup_entry+0x20/0x30
> [  237.225493]  rest_init+0xe4/0xf0
> [  237.228713]  arch_call_rest_init+0xc/0x14
> [  237.232714]  start_kernel+0x47c/0x4a8
> [  237.236367] ---[ end trace 7240980785f81d70 ]---
> 
> Lars was fast to find an explanation: according to the datasheet
> bit 2 of the rx buffer descriptor entry has a different meaning in the
> extended mode:
>   Address [2] of beginning of buffer, or
>   in extended buffer descriptor mode (DMA configuration register [28] = 1),
>   indicates a valid timestamp in the buffer descriptor entry.
> 
> The macb driver didn't mask this bit while getting an address and it
> eventually caused a memory corruption and a dma failure.
> 
> The problem is resolved by extending the MACB_RX_WADDR_SIZE
> in the extended mode.
> 
> Fixes: 7b4296148066 ("net: macb: Add support for PTP timestamps in DMA descriptors")
> Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
> Co-developed-by: Lars-Peter Clausen <lars@metafoo.de>
> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
> ---
>  drivers/net/ethernet/cadence/macb.h | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
> index c1fc91c97cee..1b330f7cfc09 100644
> --- a/drivers/net/ethernet/cadence/macb.h
> +++ b/drivers/net/ethernet/cadence/macb.h
> @@ -826,8 +826,13 @@ struct macb_dma_desc_ptp {
>  #define MACB_RX_USED_SIZE			1
>  #define MACB_RX_WRAP_OFFSET			1
>  #define MACB_RX_WRAP_SIZE			1
> +#ifdef MACB_EXT_DESC
> +#define MACB_RX_WADDR_OFFSET			3
> +#define MACB_RX_WADDR_SIZE			29
> +#else
>  #define MACB_RX_WADDR_OFFSET			2
>  #define MACB_RX_WADDR_SIZE			30
> +#endif
>  
>  #define MACB_RX_FRMLEN_OFFSET			0
>  #define MACB_RX_FRMLEN_SIZE			12
> -- 
> 2.40.0
> 

  reply	other threads:[~2023-04-11 18:21 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-07 17:24 Roman Gushchin
2023-04-11 18:20 ` Roman Gushchin [this message]
2023-04-11 18:30   ` Conor Dooley
2023-04-11 21:20     ` Roman Gushchin
2023-04-12  1:48 ` Jakub Kicinski
2023-04-12  3:13   ` Lars-Peter Clausen
2023-04-12  3:48     ` Roman Gushchin
2023-04-12  4:13       ` Jakub Kicinski
2023-04-12 15:47         ` Nicolas.Ferre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZDWk8vjvk7HO4I7o@P9FQF9L96D.corp.robot.car \
    --to=roman.gushchin@linux.dev \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=rafalo@cadence.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®