[PATCH 0/2] Fix the duplicate PMI injections in vPMU

[PATCH 0/2] Fix the duplicate PMI injections in vPMU

[Mingwei Zhang]

When we do stress test on KVM vPMU using Intel vtune, we find the following
warning kernel message in the guest VM:

[ 1437.487320] Uhhuh. NMI received for unknown reason 20 on CPU 3.
[ 1437.487330] Dazed and confused, but trying to continue

The Problem
===========

The above issue indicates that there are more NMIs injected than guest
could recognize. After a month of investigation, we discovered that the
bug happened due to minor glitches in two separate parts of the KVM: 1)
KVM vPMU mistakenly fires a PMI due to emulated counter overflow even
though the overflow has already been fired by the PMI handler on the
host [1]. 2) KVM APIC allows multiple injections of PMI at one VM entry
which violates Intel SDM. Both glitches contributes to extra injection
of PMIs and thus confuses PMI handler in guest VM and causes the above
warning messages.

The Fixes
=========

The patches disallow the multi-PMI injection fundamentally at APIC
level. In addition, they also simplify the PMI injection process by
removing irq_work and only use KVM_REQ_PMI.

The Testing
===========

With the series applied, we do not see the above warning messages when
stress testing VM with Intel vtune. In addition, we add some kernel
printing, all emulated counter overflow happens when hardware counter
value is 0 and emulated counter value is 1 (prev_counter is -1). We
never observed unexpected prev_counter values we saw in [2].

Note that this series does break the upstream kvm-unit-tests/pmu with the
following error:

FAIL: Intel: emulated instruction: instruction counter overflow
FAIL: Intel: full-width writes: emulated instruction: instruction counter overflow

This is a test bug and apply the following diff should fix the issue:

diff --git a/x86/pmu.c b/x86/pmu.c
index 0def2869..667e6233 100644
--- a/x86/pmu.c
+++ b/x86/pmu.c
@@ -68,6 +68,7 @@ volatile uint64_t irq_received;
 static void cnt_overflow(isr_regs_t *regs)
 {
 »......irq_received++;
+»......apic_write(APIC_LVTPC, apic_read(APIC_LVTPC) & ~APIC_LVT_MASKED);
 »......apic_write(APIC_EOI, 0);
 }

We will post the above change soon.

[1] commit 9cd803d496e7 ("KVM: x86: Update vPMCs when retiring instructions")
[2] https://lore.kernel.org/all/CAL715WL9T8Ucnj_1AygwMgDjOJrttNZHRP9o-KUNfpx1aYZnog@mail.gmail.com/

Versioning
==========

The series is in v1. We made some changes:
 - drop Dapeng's reviewed-by, since code changes.
 - applies fix up in kvm_apic_local_deliver(). [seanjc]
 - remove pmc->prev_counter. [seanjc]

Previous version (v0) shown as follows:
 - [APIC patches v0]: https://lore.kernel.org/all/20230901185646.2823254-1-jmattson@google.com/
 - [vPMU patch v0]: https://lore.kernel.org/all/ZQ4A4KaSyygKHDUI@google.com/

Jim Mattson (2):
  KVM: x86: Synthesize at most one PMI per VM-exit
  KVM: x86: Mask LVTPC when handling a PMI

 arch/x86/include/asm/kvm_host.h |  1 -
 arch/x86/kvm/lapic.c            |  8 ++++++--
 arch/x86/kvm/pmu.c              | 27 +--------------------------
 arch/x86/kvm/x86.c              |  3 +++
 4 files changed, 10 insertions(+), 29 deletions(-)


base-commit: 6de2ccc169683bf81feba163834dae7cdebdd826
-- 
2.42.0.515.g380fc7ccd1-goog

[PATCH 1/2] KVM: x86: Synthesize at most one PMI per VM-exit

[Mingwei Zhang]

From: Jim Mattson <jmattson@google.com>

When the irq_work callback, kvm_pmi_trigger_fn(), is invoked during a
VM-exit that also invokes __kvm_perf_overflow() as a result of
instruction emulation, kvm_pmu_deliver_pmi() will be called twice
before the next VM-entry.

That shouldn't be a problem. The local APIC is supposed to
automatically set the mask flag in LVTPC when it handles a PMI, so the
second PMI should be inhibited. However, KVM's local APIC emulation
fails to set the mask flag in LVTPC when it handles a PMI, so two PMIs
are delivered via the local APIC. In the common case, where LVTPC is
configured to deliver an NMI, the first NMI is vectored through the
guest IDT, and the second one is held pending. When the NMI handler
returns, the second NMI is vectored through the IDT. For Linux guests,
this results in the "dazed and confused" spurious NMI message.

Though the obvious fix is to set the mask flag in LVTPC when handling
a PMI, KVM's logic around synthesizing a PMI is unnecessarily
convoluted.

Remove the irq_work callback for synthesizing a PMI, and all of the
logic for invoking it. Instead, to prevent a vcpu from leaving C0 with
a PMI pending, add a check for KVM_REQ_PMI to kvm_vcpu_has_events().

Fixes: 9cd803d496e7 ("KVM: x86: Update vPMCs when retiring instructions")
Signed-off-by: Jim Mattson <jmattson@google.com>
Tested-by: Mingwei Zhang <mizhang@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
---
 arch/x86/include/asm/kvm_host.h |  1 -
 arch/x86/kvm/pmu.c              | 27 +--------------------------
 arch/x86/kvm/x86.c              |  3 +++
 3 files changed, 4 insertions(+), 27 deletions(-)

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 28bd38303d70..de951d6aa9a8 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -528,7 +528,6 @@ struct kvm_pmu {
 	u64 raw_event_mask;
 	struct kvm_pmc gp_counters[KVM_INTEL_PMC_MAX_GENERIC];
 	struct kvm_pmc fixed_counters[KVM_PMC_MAX_FIXED];
-	struct irq_work irq_work;
 
 	/*
 	 * Overlay the bitmap with a 64-bit atomic so that all bits can be
diff --git a/arch/x86/kvm/pmu.c b/arch/x86/kvm/pmu.c
index edb89b51b383..9ae07db6f0f6 100644
--- a/arch/x86/kvm/pmu.c
+++ b/arch/x86/kvm/pmu.c
@@ -93,14 +93,6 @@ void kvm_pmu_ops_update(const struct kvm_pmu_ops *pmu_ops)
 #undef __KVM_X86_PMU_OP
 }
 
-static void kvm_pmi_trigger_fn(struct irq_work *irq_work)
-{
-	struct kvm_pmu *pmu = container_of(irq_work, struct kvm_pmu, irq_work);
-	struct kvm_vcpu *vcpu = pmu_to_vcpu(pmu);
-
-	kvm_pmu_deliver_pmi(vcpu);
-}
-
 static inline void __kvm_perf_overflow(struct kvm_pmc *pmc, bool in_pmi)
 {
 	struct kvm_pmu *pmu = pmc_to_pmu(pmc);
@@ -124,20 +116,7 @@ static inline void __kvm_perf_overflow(struct kvm_pmc *pmc, bool in_pmi)
 		__set_bit(pmc->idx, (unsigned long *)&pmu->global_status);
 	}
 
-	if (!pmc->intr || skip_pmi)
-		return;
-
-	/*
-	 * Inject PMI. If vcpu was in a guest mode during NMI PMI
-	 * can be ejected on a guest mode re-entry. Otherwise we can't
-	 * be sure that vcpu wasn't executing hlt instruction at the
-	 * time of vmexit and is not going to re-enter guest mode until
-	 * woken up. So we should wake it, but this is impossible from
-	 * NMI context. Do it from irq work instead.
-	 */
-	if (in_pmi && !kvm_handling_nmi_from_guest(pmc->vcpu))
-		irq_work_queue(&pmc_to_pmu(pmc)->irq_work);
-	else
+	if (pmc->intr && !skip_pmi)
 		kvm_make_request(KVM_REQ_PMI, pmc->vcpu);
 }
 
@@ -675,9 +654,6 @@ void kvm_pmu_refresh(struct kvm_vcpu *vcpu)
 
 void kvm_pmu_reset(struct kvm_vcpu *vcpu)
 {
-	struct kvm_pmu *pmu = vcpu_to_pmu(vcpu);
-
-	irq_work_sync(&pmu->irq_work);
 	static_call(kvm_x86_pmu_reset)(vcpu);
 }
 
@@ -687,7 +663,6 @@ void kvm_pmu_init(struct kvm_vcpu *vcpu)
 
 	memset(pmu, 0, sizeof(*pmu));
 	static_call(kvm_x86_pmu_init)(vcpu);
-	init_irq_work(&pmu->irq_work, kvm_pmi_trigger_fn);
 	pmu->event_count = 0;
 	pmu->need_cleanup = false;
 	kvm_pmu_refresh(vcpu);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index a6b9bea62fb8..6f24a8c1e136 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -12820,6 +12820,9 @@ static inline bool kvm_vcpu_has_events(struct kvm_vcpu *vcpu)
 		return true;
 #endif
 
+	if (kvm_test_request(KVM_REQ_PMI, vcpu))
+		return true;
+
 	if (kvm_arch_interrupt_allowed(vcpu) &&
 	    (kvm_cpu_has_interrupt(vcpu) ||
 	    kvm_guest_apic_has_interrupt(vcpu)))
-- 
2.42.0.515.g380fc7ccd1-goog

Re: [PATCH 1/2] KVM: x86: Synthesize at most one PMI per VM-exit

[Sean Christopherson]

On Mon, Sep 25, 2023, Mingwei Zhang wrote:
> From: Jim Mattson <jmattson@google.com>
> 
> When the irq_work callback, kvm_pmi_trigger_fn(), is invoked during a
> VM-exit that also invokes __kvm_perf_overflow() as a result of
> instruction emulation, kvm_pmu_deliver_pmi() will be called twice
> before the next VM-entry.
> 
> That shouldn't be a problem. The local APIC is supposed to
> automatically set the mask flag in LVTPC when it handles a PMI, so the
> second PMI should be inhibited. However, KVM's local APIC emulation
> fails to set the mask flag in LVTPC when it handles a PMI, so two PMIs
> are delivered via the local APIC. In the common case, where LVTPC is
> configured to deliver an NMI, the first NMI is vectored through the
> guest IDT, and the second one is held pending. When the NMI handler
> returns, the second NMI is vectored through the IDT. For Linux guests,
> this results in the "dazed and confused" spurious NMI message.
> 
> Though the obvious fix is to set the mask flag in LVTPC when handling
> a PMI, KVM's logic around synthesizing a PMI is unnecessarily
> convoluted.

Unless Jim outright objects, I strongly prefer placing this patch second, with
the above two paragraphs replaced with my suggestion (or something similar):

  Calling kvm_pmu_deliver_pmi() twice is unlikely to be problematic now that
  KVM sets the LVTPC mask bit when delivering a PMI.  But using IRQ work to
  trigger the PMI is still broken, albeit very theoretically.

  E.g. if the self-IPI to trigger IRQ work is be delayed long enough for the
  vCPU to be migrated to a different pCPU, then it's possible for
  kvm_pmi_trigger_fn() to race with the kvm_pmu_deliver_pmi() from
  KVM_REQ_PMI and still generate two PMIs.

  KVM could set the mask bit using an atomic operation, but that'd just be
  piling on unnecessary code to workaround what is effectively a hack.  The
  *only* reason KVM uses IRQ work is to ensure the PMI is treated as a wake
  event, e.g. if the vCPU just executed HLT.

I understand Jim's desire for the patch to be more obviously valuable, but the
people that need convincing are already convinced that the patch is worth taking.

> Remove the irq_work callback for synthesizing a PMI, and all of the
> logic for invoking it. Instead, to prevent a vcpu from leaving C0 with
> a PMI pending, add a check for KVM_REQ_PMI to kvm_vcpu_has_events().
> 
> Fixes: 9cd803d496e7 ("KVM: x86: Update vPMCs when retiring instructions")
> Signed-off-by: Jim Mattson <jmattson@google.com>
> Tested-by: Mingwei Zhang <mizhang@google.com>
> Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>

Needs your SoB

Re: [PATCH 1/2] KVM: x86: Synthesize at most one PMI per VM-exit

[Mingwei Zhang]

On Mon, Sep 25, 2023 at 10:59 AM Sean Christopherson <seanjc@google.com> wrote:
>
> On Mon, Sep 25, 2023, Mingwei Zhang wrote:
> > From: Jim Mattson <jmattson@google.com>
> >
> > When the irq_work callback, kvm_pmi_trigger_fn(), is invoked during a
> > VM-exit that also invokes __kvm_perf_overflow() as a result of
> > instruction emulation, kvm_pmu_deliver_pmi() will be called twice
> > before the next VM-entry.
> >
> > That shouldn't be a problem. The local APIC is supposed to
> > automatically set the mask flag in LVTPC when it handles a PMI, so the
> > second PMI should be inhibited. However, KVM's local APIC emulation
> > fails to set the mask flag in LVTPC when it handles a PMI, so two PMIs
> > are delivered via the local APIC. In the common case, where LVTPC is
> > configured to deliver an NMI, the first NMI is vectored through the
> > guest IDT, and the second one is held pending. When the NMI handler
> > returns, the second NMI is vectored through the IDT. For Linux guests,
> > this results in the "dazed and confused" spurious NMI message.
> >
> > Though the obvious fix is to set the mask flag in LVTPC when handling
> > a PMI, KVM's logic around synthesizing a PMI is unnecessarily
> > convoluted.
>
> Unless Jim outright objects, I strongly prefer placing this patch second, with
> the above two paragraphs replaced with my suggestion (or something similar):
>
>   Calling kvm_pmu_deliver_pmi() twice is unlikely to be problematic now that
>   KVM sets the LVTPC mask bit when delivering a PMI.  But using IRQ work to
>   trigger the PMI is still broken, albeit very theoretically.
>
>   E.g. if the self-IPI to trigger IRQ work is be delayed long enough for the
>   vCPU to be migrated to a different pCPU, then it's possible for
>   kvm_pmi_trigger_fn() to race with the kvm_pmu_deliver_pmi() from
>   KVM_REQ_PMI and still generate two PMIs.
>
>   KVM could set the mask bit using an atomic operation, but that'd just be
>   piling on unnecessary code to workaround what is effectively a hack.  The
>   *only* reason KVM uses IRQ work is to ensure the PMI is treated as a wake
>   event, e.g. if the vCPU just executed HLT.
>
> I understand Jim's desire for the patch to be more obviously valuable, but the
> people that need convincing are already convinced that the patch is worth taking.
>
> > Remove the irq_work callback for synthesizing a PMI, and all of the
> > logic for invoking it. Instead, to prevent a vcpu from leaving C0 with
> > a PMI pending, add a check for KVM_REQ_PMI to kvm_vcpu_has_events().
> >
> > Fixes: 9cd803d496e7 ("KVM: x86: Update vPMCs when retiring instructions")
> > Signed-off-by: Jim Mattson <jmattson@google.com>
> > Tested-by: Mingwei Zhang <mizhang@google.com>
> > Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
>
> Needs your SoB

Signed-off-by: Mingwei Zhang <mizhang@google.com>

Re: [PATCH 1/2] KVM: x86: Synthesize at most one PMI per VM-exit

[Sean Christopherson]

On Mon, Sep 25, 2023, Mingwei Zhang wrote:
> On Mon, Sep 25, 2023 at 10:59 AM Sean Christopherson <seanjc@google.com> wrote:
> >
> > On Mon, Sep 25, 2023, Mingwei Zhang wrote:
> > > From: Jim Mattson <jmattson@google.com>
> > >
> > > When the irq_work callback, kvm_pmi_trigger_fn(), is invoked during a
> > > VM-exit that also invokes __kvm_perf_overflow() as a result of
> > > instruction emulation, kvm_pmu_deliver_pmi() will be called twice
> > > before the next VM-entry.
> > >
> > > That shouldn't be a problem. The local APIC is supposed to
> > > automatically set the mask flag in LVTPC when it handles a PMI, so the
> > > second PMI should be inhibited. However, KVM's local APIC emulation
> > > fails to set the mask flag in LVTPC when it handles a PMI, so two PMIs
> > > are delivered via the local APIC. In the common case, where LVTPC is
> > > configured to deliver an NMI, the first NMI is vectored through the
> > > guest IDT, and the second one is held pending. When the NMI handler
> > > returns, the second NMI is vectored through the IDT. For Linux guests,
> > > this results in the "dazed and confused" spurious NMI message.
> > >
> > > Though the obvious fix is to set the mask flag in LVTPC when handling
> > > a PMI, KVM's logic around synthesizing a PMI is unnecessarily
> > > convoluted.
> >
> > Unless Jim outright objects, I strongly prefer placing this patch second, with
> > the above two paragraphs replaced with my suggestion (or something similar):
> >
> >   Calling kvm_pmu_deliver_pmi() twice is unlikely to be problematic now that
> >   KVM sets the LVTPC mask bit when delivering a PMI.  But using IRQ work to
> >   trigger the PMI is still broken, albeit very theoretically.
> >
> >   E.g. if the self-IPI to trigger IRQ work is be delayed long enough for the
> >   vCPU to be migrated to a different pCPU, then it's possible for
> >   kvm_pmi_trigger_fn() to race with the kvm_pmu_deliver_pmi() from
> >   KVM_REQ_PMI and still generate two PMIs.
> >
> >   KVM could set the mask bit using an atomic operation, but that'd just be
> >   piling on unnecessary code to workaround what is effectively a hack.  The
> >   *only* reason KVM uses IRQ work is to ensure the PMI is treated as a wake
> >   event, e.g. if the vCPU just executed HLT.
> >
> > I understand Jim's desire for the patch to be more obviously valuable, but the
> > people that need convincing are already convinced that the patch is worth taking.
> >
> > > Remove the irq_work callback for synthesizing a PMI, and all of the
> > > logic for invoking it. Instead, to prevent a vcpu from leaving C0 with
> > > a PMI pending, add a check for KVM_REQ_PMI to kvm_vcpu_has_events().
> > >
> > > Fixes: 9cd803d496e7 ("KVM: x86: Update vPMCs when retiring instructions")
> > > Signed-off-by: Jim Mattson <jmattson@google.com>
> > > Tested-by: Mingwei Zhang <mizhang@google.com>
> > > Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
> >
> > Needs your SoB
> 
> Signed-off-by: Mingwei Zhang <mizhang@google.com>

Thanks!

Jim gave his blessing off-list for swapping the order, I'll do that and massage
the changelogs when applying, i.e. no need for a v3.

[PATCH 2/2] KVM: x86: Mask LVTPC when handling a PMI

[Mingwei Zhang]

From: Jim Mattson <jmattson@google.com>

Per the SDM, "When the local APIC handles a performance-monitoring
counters interrupt, it automatically sets the mask flag in the LVT
performance counter register."

Add this behavior to KVM's local APIC emulation, to reduce the
incidence of "dazed and confused" spurious NMI warnings in Linux
guests (at least, those that use a PMI handler with "late_ack").

Fixes: 23930f9521c9 ("KVM: x86: Enable NMI Watchdog via in-kernel PIT source")
Signed-off-by: Jim Mattson <jmattson@google.com>
Tested-by: Mingwei Zhang <mizhang@google.com>
---
 arch/x86/kvm/lapic.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 113ca9661ab2..1f3d56a1f45f 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -2729,13 +2729,17 @@ int kvm_apic_local_deliver(struct kvm_lapic *apic, int lvt_type)
 {
 	u32 reg = kvm_lapic_get_reg(apic, lvt_type);
 	int vector, mode, trig_mode;
+	int r;
 
 	if (kvm_apic_hw_enabled(apic) && !(reg & APIC_LVT_MASKED)) {
 		vector = reg & APIC_VECTOR_MASK;
 		mode = reg & APIC_MODE_MASK;
 		trig_mode = reg & APIC_LVT_LEVEL_TRIGGER;
-		return __apic_accept_irq(apic, mode, vector, 1, trig_mode,
-					NULL);
+
+		r = __apic_accept_irq(apic, mode, vector, 1, trig_mode, NULL);
+		if (r && lvt_type == APIC_LVTPC)
+			kvm_lapic_set_reg(apic, lvt_type, reg | APIC_LVT_MASKED);
+		return r;
 	}
 	return 0;
 }
-- 
2.42.0.515.g380fc7ccd1-goog

Re: [PATCH 2/2] KVM: x86: Mask LVTPC when handling a PMI

[Sean Christopherson]

On Mon, Sep 25, 2023, Mingwei Zhang wrote:
> From: Jim Mattson <jmattson@google.com>
> 
> Per the SDM, "When the local APIC handles a performance-monitoring
> counters interrupt, it automatically sets the mask flag in the LVT
> performance counter register."
> 
> Add this behavior to KVM's local APIC emulation, to reduce the
> incidence of "dazed and confused" spurious NMI warnings in Linux
> guests (at least, those that use a PMI handler with "late_ack").
> 
> Fixes: 23930f9521c9 ("KVM: x86: Enable NMI Watchdog via in-kernel PIT source")

This Fixes is wrong.  Prior to commit f5132b01386b ("KVM: Expose a version 2
architectural PMU to a guests"), KVM didn't ever deliver interrupts via the LVTPC
entry.  E.g. prior to that commit, the only reference to APIC_LVTPC is in
kvm_lapic_reg_write:

  arch/x86/kvm $ git grep APIC_LVTPC f5132b01386b^
  f5132b01386b^:lapic.c:  case APIC_LVTPC:

Commit 23930f9521c9 definitely set the PMU support up to fail, but the bug would
never have existed if kvm_deliver_pmi() had been written as:

void kvm_deliver_pmi(struct kvm_vcpu *vcpu)
{
	struct kvm_lapic *apic = vcpu->arch.apic;

	if (apic && kvm_apic_local_deliver(apic, APIC_LVTPC))
		kvm_lapic_set_reg(apic, APIC_LVTPC,
				  kvm_lapic_get_reg(apic, LVTPC) | APIC_LVT_MASKED);
}

And this needs an explicit Cc: to stable because KVM opts out of AUTOSEL.

So

  Fixes: f5132b01386b ("KVM: Expose a version 2 architectural PMU to a guests")
  Cc: stable@vger.kernel.org

> Signed-off-by: Jim Mattson <jmattson@google.com>
> Tested-by: Mingwei Zhang <mizhang@google.com>

When posting patches on behalf of others, you need to provide your SoB.

> ---
>  arch/x86/kvm/lapic.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
> index 113ca9661ab2..1f3d56a1f45f 100644
> --- a/arch/x86/kvm/lapic.c
> +++ b/arch/x86/kvm/lapic.c
> @@ -2729,13 +2729,17 @@ int kvm_apic_local_deliver(struct kvm_lapic *apic, int lvt_type)
>  {
>  	u32 reg = kvm_lapic_get_reg(apic, lvt_type);
>  	int vector, mode, trig_mode;
> +	int r;
>  
>  	if (kvm_apic_hw_enabled(apic) && !(reg & APIC_LVT_MASKED)) {
>  		vector = reg & APIC_VECTOR_MASK;
>  		mode = reg & APIC_MODE_MASK;
>  		trig_mode = reg & APIC_LVT_LEVEL_TRIGGER;
> -		return __apic_accept_irq(apic, mode, vector, 1, trig_mode,
> -					NULL);
> +
> +		r = __apic_accept_irq(apic, mode, vector, 1, trig_mode, NULL);
> +		if (r && lvt_type == APIC_LVTPC)
> +			kvm_lapic_set_reg(apic, lvt_type, reg | APIC_LVT_MASKED);

Belated feedback, I think I'd prefer to write this as

			kvm_lapic_set_reg(apic, APIC_LVTPC, reg | APIC_LVT_MASKED);

so that this code will show up when searching for APIC_LVTPC.

> +		return r;
>  	}
>  	return 0;
>  }
> -- 
> 2.42.0.515.g380fc7ccd1-goog
> 

Re: [PATCH 2/2] KVM: x86: Mask LVTPC when handling a PMI

[Mingwei Zhang]

On Mon, Sep 25, 2023 at 10:52 AM Sean Christopherson <seanjc@google.com> wrote:
>
> On Mon, Sep 25, 2023, Mingwei Zhang wrote:
> > From: Jim Mattson <jmattson@google.com>
> >
> > Per the SDM, "When the local APIC handles a performance-monitoring
> > counters interrupt, it automatically sets the mask flag in the LVT
> > performance counter register."
> >
> > Add this behavior to KVM's local APIC emulation, to reduce the
> > incidence of "dazed and confused" spurious NMI warnings in Linux
> > guests (at least, those that use a PMI handler with "late_ack").
> >
> > Fixes: 23930f9521c9 ("KVM: x86: Enable NMI Watchdog via in-kernel PIT source")
>
> This Fixes is wrong.  Prior to commit f5132b01386b ("KVM: Expose a version 2
> architectural PMU to a guests"), KVM didn't ever deliver interrupts via the LVTPC
> entry.  E.g. prior to that commit, the only reference to APIC_LVTPC is in
> kvm_lapic_reg_write:
>
>   arch/x86/kvm $ git grep APIC_LVTPC f5132b01386b^
>   f5132b01386b^:lapic.c:  case APIC_LVTPC:
>
> Commit 23930f9521c9 definitely set the PMU support up to fail, but the bug would
> never have existed if kvm_deliver_pmi() had been written as:
>
> void kvm_deliver_pmi(struct kvm_vcpu *vcpu)
> {
>         struct kvm_lapic *apic = vcpu->arch.apic;
>
>         if (apic && kvm_apic_local_deliver(apic, APIC_LVTPC))
>                 kvm_lapic_set_reg(apic, APIC_LVTPC,
>                                   kvm_lapic_get_reg(apic, LVTPC) | APIC_LVT_MASKED);
> }
>
> And this needs an explicit Cc: to stable because KVM opts out of AUTOSEL.
>
> So
>
>   Fixes: f5132b01386b ("KVM: Expose a version 2 architectural PMU to a guests")
>   Cc: stable@vger.kernel.org
>
> > Signed-off-by: Jim Mattson <jmattson@google.com>
> > Tested-by: Mingwei Zhang <mizhang@google.com>
>
> When posting patches on behalf of others, you need to provide your SoB.
>
> > ---
> >  arch/x86/kvm/lapic.c | 8 ++++++--
> >  1 file changed, 6 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
> > index 113ca9661ab2..1f3d56a1f45f 100644
> > --- a/arch/x86/kvm/lapic.c
> > +++ b/arch/x86/kvm/lapic.c
> > @@ -2729,13 +2729,17 @@ int kvm_apic_local_deliver(struct kvm_lapic *apic, int lvt_type)
> >  {
> >       u32 reg = kvm_lapic_get_reg(apic, lvt_type);
> >       int vector, mode, trig_mode;
> > +     int r;
> >
> >       if (kvm_apic_hw_enabled(apic) && !(reg & APIC_LVT_MASKED)) {
> >               vector = reg & APIC_VECTOR_MASK;
> >               mode = reg & APIC_MODE_MASK;
> >               trig_mode = reg & APIC_LVT_LEVEL_TRIGGER;
> > -             return __apic_accept_irq(apic, mode, vector, 1, trig_mode,
> > -                                     NULL);
> > +
> > +             r = __apic_accept_irq(apic, mode, vector, 1, trig_mode, NULL);
> > +             if (r && lvt_type == APIC_LVTPC)
> > +                     kvm_lapic_set_reg(apic, lvt_type, reg | APIC_LVT_MASKED);
>
> Belated feedback, I think I'd prefer to write this as
>
>                         kvm_lapic_set_reg(apic, APIC_LVTPC, reg | APIC_LVT_MASKED);
>
> so that this code will show up when searching for APIC_LVTPC.
>
> > +             return r;
> >       }
> >       return 0;
> >  }
> > --
> > 2.42.0.515.g380fc7ccd1-goog
> >
Signed-off-by: Mingwei Zhang <mizhang@google.com>

Re: [PATCH 0/2] Fix the duplicate PMI injections in vPMU

[Sean Christopherson]

On Mon, 25 Sep 2023 17:34:45 +0000, Mingwei Zhang wrote:
> When we do stress test on KVM vPMU using Intel vtune, we find the following
> warning kernel message in the guest VM:
> 
> [ 1437.487320] Uhhuh. NMI received for unknown reason 20 on CPU 3.
> [ 1437.487330] Dazed and confused, but trying to continue
> 
> The Problem
> ===========
> 
> [...]

Applied to kvm-x86 pmu, with the order swapped and a bit of changelog massaging.
Thanks!

[1/2] KVM: x86: Mask LVTPC when handling a PMI
      https://github.com/kvm-x86/linux/commit/a16eb25b09c0
[2/2] KVM: x86/pmu: Synthesize at most one PMI per VM-exit
      https://github.com/kvm-x86/linux/commit/73554b29bd70

--
https://github.com/kvm-x86/linux/tree/next