From: Daniel Vetter <daniel@ffwll.ch>
To: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Cc: Daniel Stone <daniel@fooishbar.org>,
Lucas Stach <l.stach@pengutronix.de>,
linux-kernel@vger.kernel.org, Oded Gabbay <ogabbay@kernel.org>,
Russell King <linux+etnaviv@armlinux.org.uk>,
Christian Gmeiner <christian.gmeiner@gmail.com>,
David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
etnaviv@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
Daniel Stone <daniels@collabora.com>
Subject: Re: [PATCH] drm/etnaviv: Create an accel device node if compute-only
Date: Wed, 26 Jun 2024 09:28:37 +0200 [thread overview]
Message-ID: <ZnvDJVeT3rz-hnv9@phenom.ffwll.local> (raw)
In-Reply-To: <CAAObsKAt563VNzDcF4rGkWPcxBPzKcq=Hj5RY6K20FWR43nvUQ@mail.gmail.com>
On Mon, Jun 17, 2024 at 07:01:05PM +0200, Tomeu Vizoso wrote:
> Hi Lucas,
>
> Do you have any idea on how not to break userspace if we expose a render node?
So if you get a new chip with an incompatible 3d block, you already have
that issue. And I hope etnaviv userspace can cope.
Worst case you need to publish a fake extremely_fancy_3d_block to make
sure old mesa never binds against an NPU-only instance.
Or mesa just doesn't cope, in which case we need a etnaviv-v2-we_are_sorry
drm driver name, or something like that.
-Sima
>
> Cheers,
>
> Tomeu
>
> On Wed, Jun 12, 2024 at 4:26 PM Tomeu Vizoso <tomeu@tomeuvizoso.net> wrote:
> >
> > On Mon, May 20, 2024 at 1:19 PM Daniel Stone <daniel@fooishbar.org> wrote:
> > >
> > > Hi,
> > >
> > > On Mon, 20 May 2024 at 08:39, Tomeu Vizoso <tomeu@tomeuvizoso.net> wrote:
> > > > On Fri, May 10, 2024 at 10:34 AM Lucas Stach <l.stach@pengutronix.de> wrote:
> > > > > Am Mittwoch, dem 24.04.2024 um 08:37 +0200 schrieb Tomeu Vizoso:
> > > > > > If we expose a render node for NPUs without rendering capabilities, the
> > > > > > userspace stack will offer it to compositors and applications for
> > > > > > rendering, which of course won't work.
> > > > > >
> > > > > > Userspace is probably right in not questioning whether a render node
> > > > > > might not be capable of supporting rendering, so change it in the kernel
> > > > > > instead by exposing a /dev/accel node.
> > > > > >
> > > > > > Before we bring the device up we don't know whether it is capable of
> > > > > > rendering or not (depends on the features of its blocks), so first try
> > > > > > to probe a rendering node, and if we find out that there is no rendering
> > > > > > hardware, abort and retry with an accel node.
> > > > >
> > > > > On the other hand we already have precedence of compute only DRM
> > > > > devices exposing a render node: there are AMD GPUs that don't expose a
> > > > > graphics queue and are thus not able to actually render graphics. Mesa
> > > > > already handles this in part via the PIPE_CAP_GRAPHICS and I think we
> > > > > should simply extend this to not offer a EGL display on screens without
> > > > > that capability.
> > > >
> > > > The problem with this is that the compositors I know don't loop over
> > > > /dev/dri files, trying to create EGL screens and moving to the next
> > > > one until they find one that works.
> > > >
> > > > They take the first render node (unless a specific one has been
> > > > configured), and assumes it will be able to render with it.
> > > >
> > > > To me it seems as if userspace expects that /dev/dri/renderD* devices
> > > > can be used for rendering and by breaking this assumption we would be
> > > > breaking existing software.
> > >
> > > Mm, it's sort of backwards from that. Compositors just take a
> > > non-render DRM node for KMS, then ask GBM+EGL to instantiate a GPU
> > > which can work with that. When run in headless mode, we don't take
> > > render nodes directly, but instead just create an EGLDisplay or
> > > VkPhysicalDevice and work backwards to a render node, rather than
> > > selecting a render node and going from there.
> > >
> > > So from that PoV I don't think it's really that harmful. The only
> > > complication is in Mesa, where it would see an etnaviv/amdgpu/...
> > > render node and potentially try to use it as a device. As long as Mesa
> > > can correctly skip, there should be no userspace API implications.
> > >
> > > That being said, I'm not entirely sure what the _benefit_ would be of
> > > exposing a render node for a device which can't be used by any
> > > 'traditional' DRM consumers, i.e. GL/Vulkan/winsys.
> >
> > What I don't understand yet from Lucas proposal is how this isn't
> > going to break existing userspace.
> >
> > I mean, even if we find a good way of having userspace skip
> > non-rendering render nodes, what about existing userspace that isn't
> > able to do that? Any updates to newer kernels are going to break them.
> >
> > Regards,
> >
> > Tomeu
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
next prev parent reply other threads:[~2024-06-26 7:28 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-24 6:37 Tomeu Vizoso
2024-04-25 11:32 ` Christian Gmeiner
2024-04-26 5:36 ` Tomeu Vizoso
2024-04-25 18:59 ` Jeffrey Hugo
2024-04-26 6:10 ` Tomeu Vizoso
2024-05-09 13:53 ` Tomeu Vizoso
2024-05-09 14:41 ` Oded Gabbay
2024-06-26 7:26 ` Daniel Vetter
2024-06-26 8:42 ` Dmitry Baryshkov
2024-06-26 17:49 ` Daniel Vetter
2024-05-10 8:34 ` Lucas Stach
2024-05-20 7:39 ` Tomeu Vizoso
2024-05-20 11:19 ` Daniel Stone
2024-06-12 14:26 ` Tomeu Vizoso
2024-06-17 17:01 ` Tomeu Vizoso
2024-06-26 7:28 ` Daniel Vetter [this message]
2024-06-26 8:28 ` Lucas Stach
2024-06-26 10:39 ` Daniel Stone
2024-06-26 17:52 ` Daniel Vetter
2024-06-26 19:26 ` Daniel Stone
2024-06-28 9:43 ` Tomeu Vizoso
2024-06-28 9:54 ` Daniel Stone
2024-06-28 17:47 ` Daniel Vetter
2024-05-20 9:24 ` Tomeu Vizoso
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZnvDJVeT3rz-hnv9@phenom.ffwll.local \
--to=daniel@ffwll.ch \
--cc=airlied@gmail.com \
--cc=christian.gmeiner@gmail.com \
--cc=daniel@fooishbar.org \
--cc=daniels@collabora.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=etnaviv@lists.freedesktop.org \
--cc=l.stach@pengutronix.de \
--cc=linux+etnaviv@armlinux.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=ogabbay@kernel.org \
--cc=tomeu@tomeuvizoso.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®