[PATCH 0/4] MIPS: Refresh some configs

[PATCH 0/4] MIPS: Refresh some configs

[Jiaxun Yang]

To: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
---
Jiaxun Yang (4):
      MIPS: config: Enable MSA and virtualization for MIPS64R6
      MIPS: config: generic: Add board-litex
      MIPS: config: lemote2f: Regenerate defconfig
      MIPS: config: Add ip30_defconfig

 arch/mips/configs/generic/64r6.config        |   2 +
 arch/mips/configs/generic/board-litex.config |   8 +
 arch/mips/configs/ip30_defconfig             | 285 +++++++++++++++++++++++++++
 arch/mips/configs/lemote2f_defconfig         |  54 +++--
 4 files changed, 318 insertions(+), 31 deletions(-)
---
base-commit: 0b58e108042b0ed28a71cd7edf5175999955b233
change-id: 20240706-config-refresh-f1f87ddf3652

Best regards,
-- 
Jiaxun Yang <jiaxun.yang@flygoat.com>

[PATCH 1/4] MIPS: config: Enable MSA and virtualization for MIPS64R6

[Jiaxun Yang]

All MIPS64R6 cores so far supports MSA and vz, so it makes sense
to enable them in 64R6 default config.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
---
 arch/mips/configs/generic/64r6.config | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/mips/configs/generic/64r6.config b/arch/mips/configs/generic/64r6.config
index 5dd8e8503e34..2a2036abdd2d 100644
--- a/arch/mips/configs/generic/64r6.config
+++ b/arch/mips/configs/generic/64r6.config
@@ -3,4 +3,6 @@ CONFIG_64BIT=y
 CONFIG_MIPS32_O32=y
 CONFIG_MIPS32_N32=y
 
+CONIFG_CPU_HAS_MSA=y
 CONFIG_CRYPTO_CRC32_MIPS=y
+CONFIG_VIRTUALIZATION=y

-- 
2.45.2

Re: [PATCH 1/4] MIPS: config: Enable MSA and virtualization for MIPS64R6

[Jiaxun Yang]

在2024年7月6日七月 下午1:07，Jiaxun Yang写道：
> All MIPS64R6 cores so far supports MSA and vz, so it makes sense
> to enable them in 64R6 default config.
>
> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
> ---
>  arch/mips/configs/generic/64r6.config | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/arch/mips/configs/generic/64r6.config 
> b/arch/mips/configs/generic/64r6.config
> index 5dd8e8503e34..2a2036abdd2d 100644
> --- a/arch/mips/configs/generic/64r6.config
> +++ b/arch/mips/configs/generic/64r6.config
> @@ -3,4 +3,6 @@ CONFIG_64BIT=y
>  CONFIG_MIPS32_O32=y
>  CONFIG_MIPS32_N32=y
> 
> +CONIFG_CPU_HAS_MSA=y
^ Ouch, typo here when I copy changes back from my build machine.

Will respin after initial review.

Thanks
>  CONFIG_CRYPTO_CRC32_MIPS=y
> +CONFIG_VIRTUALIZATION=y
>
> -- 
> 2.45.2

-- 
- Jiaxun

[PATCH 2/4] MIPS: config: generic: Add board-litex

[Jiaxun Yang]

The LiteX framework provides a convenient and efficient infrastructure
to create FPGA Cores/SoCs.

We have implemented LiteX support for a couple of opensource MIPS
CPU cores including microAptiv UP from MIPS, GS232 from Loongson,
and CDIM from CQU.

For this platform, devicetree is generated by litex python scripts
so there is no devicetree addition necessary.

Link: https://github.com/enjoy-digital/litex/pull/1990
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
---
 arch/mips/configs/generic/board-litex.config | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/mips/configs/generic/board-litex.config b/arch/mips/configs/generic/board-litex.config
new file mode 100644
index 000000000000..f372d0647bfc
--- /dev/null
+++ b/arch/mips/configs/generic/board-litex.config
@@ -0,0 +1,8 @@
+CONFIG_LITEX_LITEETH=y
+CONFIG_SERIAL_LITEUART=y
+CONFIG_SERIAL_LITEUART_CONSOLE=y
+CONFIG_MMC=y
+CONFIG_MMC_LITEX=y
+CONFIG_LITEX_SOC_CONTROLLER=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y

-- 
2.45.2

[PATCH 3/4] MIPS: config: lemote2f: Regenerate defconfig

[Jiaxun Yang]

Regenerate defconfig to include some drivers that are used
by this platform, including sm712fb, simplefb, rtl8187.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
---
 arch/mips/configs/lemote2f_defconfig | 54 +++++++++++++++---------------------
 1 file changed, 23 insertions(+), 31 deletions(-)

diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig
index 3389e6e885d9..71d6340497c9 100644
--- a/arch/mips/configs/lemote2f_defconfig
+++ b/arch/mips/configs/lemote2f_defconfig
@@ -12,15 +12,14 @@ CONFIG_LOG_BUF_SHIFT=15
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_PROFILING=y
+CONFIG_KEXEC=y
 CONFIG_MACH_LOONGSON2EF=y
 CONFIG_LEMOTE_MACH2F=y
-CONFIG_KEXEC=y
-# CONFIG_SECCOMP is not set
-CONFIG_PCI=y
 CONFIG_MIPS32_O32=y
 CONFIG_MIPS32_N32=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION="/dev/hda3"
+# CONFIG_SECCOMP is not set
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
@@ -68,10 +67,10 @@ CONFIG_BT_HIDP=m
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIVHCI=m
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
 CONFIG_MAC80211_LEDS=y
-CONFIG_RFKILL=m
+CONFIG_RFKILL=y
 CONFIG_RFKILL_INPUT=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
@@ -83,13 +82,10 @@ CONFIG_ATA=y
 CONFIG_PATA_AMD=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 CONFIG_MD_RAID10=m
 CONFIG_MD_RAID456=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_DEBUG=y
 CONFIG_DM_CRYPT=m
@@ -112,6 +108,10 @@ CONFIG_8139TOO=y
 CONFIG_R8169=y
 CONFIG_USB_USBNET=m
 CONFIG_USB_NET_CDC_EEM=m
+CONFIG_RTL8180=m
+CONFIG_RTL8187=y
+CONFIG_RTL_CARDS=m
+CONFIG_RTL8XXXU=m
 CONFIG_INPUT_EVDEV=y
 # CONFIG_MOUSE_PS2_ALPS is not set
 # CONFIG_MOUSE_PS2_LOGIPS2PP is not set
@@ -119,27 +119,27 @@ CONFIG_INPUT_EVDEV=y
 CONFIG_MOUSE_APPLETOUCH=m
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_SERIAL_8250=m
 # CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_NR_UARTS=16
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_FOURPORT=y
+CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_HW_RANDOM=y
 CONFIG_GPIO_LOONGSON=y
 CONFIG_THERMAL=y
 CONFIG_MEDIA_SUPPORT=m
 CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
 CONFIG_FB_SIS=y
 CONFIG_FB_SIS_300=y
 CONFIG_FB_SIS_315=y
-# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_FB_SIMPLE=y
+CONFIG_FB_SM712=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_LOGO=y
@@ -238,7 +238,6 @@ CONFIG_BTRFS_FS=m
 CONFIG_QUOTA=y
 CONFIG_QFMT_V2=m
 CONFIG_AUTOFS_FS=m
-CONFIG_NETFS_SUPPORT=m
 CONFIG_FSCACHE=y
 CONFIG_CACHEFILES=m
 CONFIG_ISO9660_FS=m
@@ -247,7 +246,6 @@ CONFIG_ZISOFS=y
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_NTFS_FS=m
-CONFIG_NTFS_RW=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_CRAMFS=m
@@ -299,29 +297,23 @@ CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=y
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_LZO=m
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_6x11=y

-- 
2.45.2

[PATCH 4/4] MIPS: config: Add ip30_defconfig

[Jiaxun Yang]

Add ip30_defconfig derived from ip27_defconfig to ensure this
target is build tested by various kernel testing projects.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
---
 arch/mips/configs/ip30_defconfig | 285 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 285 insertions(+)

diff --git a/arch/mips/configs/ip30_defconfig b/arch/mips/configs/ip30_defconfig
new file mode 100644
index 000000000000..c0e790e68977
--- /dev/null
+++ b/arch/mips/configs/ip30_defconfig
@@ -0,0 +1,285 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_CGROUPS=y
+CONFIG_CPUSETS=y
+CONFIG_RELAY=y
+CONFIG_EXPERT=y
+CONFIG_SGI_IP30=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_HZ_1000=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
+CONFIG_PM=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_SGI_PARTITION=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_XFRM_STATISTICS=y
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_TCP_MD5SIG=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=y
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
+CONFIG_RFKILL=m
+# CONFIG_VGA_ARB is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_ATA_OVER_ETH=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_BE2ISCSI=m
+CONFIG_SCSI_HPSA=m
+CONFIG_SCSI_3W_SAS=m
+CONFIG_SCSI_AIC94XX=m
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=m
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+CONFIG_SCSI_MPT2SAS=m
+CONFIG_LIBFC=m
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_SCSI_PMCRAID=m
+CONFIG_SCSI_BFA_FC=m
+CONFIG_SCSI_DH=y
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=y
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+CONFIG_DM_UEVENT=y
+CONFIG_IFB=m
+CONFIG_MACVLAN=m
+CONFIG_VETH=m
+CONFIG_ATL2=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_B44=m
+CONFIG_BNX2X=m
+CONFIG_ENIC=m
+CONFIG_DNET=m
+CONFIG_BE2NET=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IGBVF=m
+CONFIG_IXGBE=m
+CONFIG_JME=m
+CONFIG_MLX4_EN=m
+# CONFIG_MLX4_DEBUG is not set
+CONFIG_KS8851_MLL=m
+CONFIG_AX88796=m
+CONFIG_AX88796_93CX6=y
+CONFIG_ETHOC=m
+CONFIG_QLA3XXX=m
+CONFIG_NETXEN_NIC=m
+CONFIG_SFC=m
+CONFIG_SMC91X=m
+CONFIG_SMSC911X=m
+CONFIG_NIU=m
+CONFIG_TEHUTI=m
+CONFIG_VIA_VELOCITY=m
+CONFIG_PHYLIB=y
+CONFIG_CICADA_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_STE10XP=m
+CONFIG_VITESSE_PHY=m
+CONFIG_ADM8211=m
+CONFIG_ATH5K=m
+CONFIG_ATH9K=m
+CONFIG_B43=m
+CONFIG_B43LEGACY=m
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+CONFIG_IPW2100_DEBUG=y
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+CONFIG_IPW2200_DEBUG=y
+CONFIG_IWLWIFI=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_PCI=m
+CONFIG_LIBERTAS_THINFIRM=m
+CONFIG_MWL8K=m
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RTL8180=m
+CONFIG_WL1251=m
+CONFIG_WL12XX=m
+# CONFIG_INPUT is not set
+CONFIG_SERIO_LIBPS2=m
+CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
+# CONFIG_VT is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_NOZOMI=m
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+CONFIG_I2C_SIMTEC=m
+CONFIG_I2C_TAOS_EVM=m
+CONFIG_I2C_STUB=m
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_M48T35=y
+CONFIG_UIO=y
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_SQUASHFS=m
+CONFIG_OMFS_FS=m
+CONFIG_NFS_FS=y
+CONFIG_SECURITYFS=y
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRC_T10DIF=m

-- 
2.45.2

Re: [PATCH 4/4] MIPS: config: Add ip30_defconfig

[Thomas Bogendoerfer]

On Sat, Jul 06, 2024 at 01:08:01PM +0800, Jiaxun Yang wrote:
> Add ip30_defconfig derived from ip27_defconfig to ensure this
> target is build tested by various kernel testing projects.

thank you for doing this.

> +CONFIG_CFG80211=m
> +CONFIG_MAC80211=m
> +CONFIG_RFKILL=m

no wifi

> +# CONFIG_VGA_ARB is not set
> +CONFIG_BLK_DEV_LOOP=y
> +CONFIG_CDROM_PKTCDVD=m
> +CONFIG_ATA_OVER_ETH=m
> +CONFIG_SCSI=y
> +CONFIG_BLK_DEV_SD=y
> +CONFIG_CHR_DEV_ST=y
> +CONFIG_BLK_DEV_SR=m
> +CONFIG_CHR_DEV_SG=m
> +CONFIG_CHR_DEV_SCH=m
> +CONFIG_SCSI_CONSTANTS=y
> +CONFIG_SCSI_LOGGING=y
> +CONFIG_SCSI_SCAN_ASYNC=y
> +CONFIG_SCSI_SPI_ATTRS=y
> +CONFIG_SCSI_FC_ATTRS=y
> +CONFIG_SCSI_CXGB3_ISCSI=m
> +CONFIG_SCSI_BNX2_ISCSI=m
> +CONFIG_BE2ISCSI=m
> +CONFIG_SCSI_HPSA=m
> +CONFIG_SCSI_3W_SAS=m
> +CONFIG_SCSI_AIC94XX=m
> +# CONFIG_AIC94XX_DEBUG is not set
> +CONFIG_SCSI_MVSAS=m
> +# CONFIG_SCSI_MVSAS_DEBUG is not set
> +CONFIG_SCSI_MPT2SAS=m
> +CONFIG_LIBFC=m
> +CONFIG_SCSI_QLOGIC_1280=y
> +CONFIG_SCSI_PMCRAID=m
> +CONFIG_SCSI_BFA_FC=m
> +CONFIG_SCSI_DH=y
> +CONFIG_SCSI_DH_RDAC=m
> +CONFIG_SCSI_DH_HP_SW=m
> +CONFIG_SCSI_DH_EMC=m
> +CONFIG_SCSI_DH_ALUA=m

for SCSI only QLOGIC_1280 should be enough

> +CONFIG_ATL2=m
> +CONFIG_ATL1E=m
> +CONFIG_ATL1C=m
> +CONFIG_B44=m
> +CONFIG_BNX2X=m
> +CONFIG_ENIC=m
> +CONFIG_DNET=m
> +CONFIG_BE2NET=m
> +CONFIG_E1000E=m
> +CONFIG_IGB=m
> +CONFIG_IGBVF=m
> +CONFIG_IXGBE=m
> +CONFIG_JME=m
> +CONFIG_MLX4_EN=m
> +# CONFIG_MLX4_DEBUG is not set
> +CONFIG_KS8851_MLL=m
> +CONFIG_AX88796=m
> +CONFIG_AX88796_93CX6=y
> +CONFIG_ETHOC=m
> +CONFIG_QLA3XXX=m
> +CONFIG_NETXEN_NIC=m
> +CONFIG_SFC=m
> +CONFIG_SMC91X=m
> +CONFIG_SMSC911X=m
> +CONFIG_NIU=m
> +CONFIG_TEHUTI=m
> +CONFIG_VIA_VELOCITY=m
> +CONFIG_PHYLIB=y
> +CONFIG_CICADA_PHY=m
> +CONFIG_DAVICOM_PHY=m
> +CONFIG_ICPLUS_PHY=m
> +CONFIG_LXT_PHY=m
> +CONFIG_LSI_ET1011C_PHY=m
> +CONFIG_MARVELL_PHY=m
> +CONFIG_NATIONAL_PHY=m
> +CONFIG_QSEMI_PHY=m
> +CONFIG_REALTEK_PHY=m
> +CONFIG_SMSC_PHY=m
> +CONFIG_STE10XP=m
> +CONFIG_VITESSE_PHY=m
> +CONFIG_ADM8211=m

for wired ethernet IOC3, TG3, ACENIC. The first comes on motherboards,
the other two are common card. Everything else non 64bit will simply
not work.

> +CONFIG_ATH5K=m
> +CONFIG_ATH9K=m
> +CONFIG_B43=m
> +CONFIG_B43LEGACY=m
> +# CONFIG_B43LEGACY_DEBUG is not set
> +CONFIG_IPW2100=m
> +CONFIG_IPW2100_MONITOR=y
> +CONFIG_IPW2100_DEBUG=y
> +CONFIG_IPW2200=m
> +CONFIG_IPW2200_MONITOR=y
> +CONFIG_IPW2200_PROMISCUOUS=y
> +CONFIG_IPW2200_QOS=y
> +CONFIG_IPW2200_DEBUG=y
> +CONFIG_IWLWIFI=m
> +CONFIG_P54_COMMON=m
> +CONFIG_P54_PCI=m
> +CONFIG_LIBERTAS_THINFIRM=m
> +CONFIG_MWL8K=m
> +CONFIG_RT2X00=m
> +CONFIG_RT2400PCI=m
> +CONFIG_RT2500PCI=m
> +CONFIG_RT61PCI=m
> +CONFIG_RT2800PCI=m
> +CONFIG_RTL8180=m
> +CONFIG_WL1251=m
> +CONFIG_WL12XX=m

placing WIFI cards into a IP30 would be challengin ;-) Better drop
it

> +# CONFIG_INPUT is not set

there are keyboard and mouse on IP30, so enabling it would make sense

> +CONFIG_SERIO_LIBPS2=m
> +CONFIG_SERIO_RAW=m
> +CONFIG_SERIO_ALTERA_PS2=m
> +# CONFIG_VT is not set
> +CONFIG_SERIAL_8250=y
> +CONFIG_SERIAL_8250_CONSOLE=y
> +CONFIG_SERIAL_8250_EXTENDED=y
> +CONFIG_SERIAL_8250_MANY_PORTS=y
> +CONFIG_SERIAL_8250_SHARE_IRQ=y
> +CONFIG_NOZOMI=m
> +CONFIG_HW_RANDOM_TIMERIOMEM=m
> +CONFIG_I2C_CHARDEV=m
> +CONFIG_I2C_ALI1535=m
> +CONFIG_I2C_ALI1563=m
> +CONFIG_I2C_ALI15X3=m
> +CONFIG_I2C_AMD756=m
> +CONFIG_I2C_AMD8111=m
> +CONFIG_I2C_I801=m
> +CONFIG_I2C_ISCH=m
> +CONFIG_I2C_PIIX4=m
> +CONFIG_I2C_NFORCE2=m
> +CONFIG_I2C_SIS5595=m
> +CONFIG_I2C_SIS630=m
> +CONFIG_I2C_SIS96X=m
> +CONFIG_I2C_VIA=m
> +CONFIG_I2C_VIAPRO=m
> +CONFIG_I2C_OCORES=m
> +CONFIG_I2C_PCA_PLATFORM=m
> +CONFIG_I2C_SIMTEC=m
> +CONFIG_I2C_TAOS_EVM=m
> +CONFIG_I2C_STUB=m

there is no i2c in IP30

important pieces missing:

CONFIG_SGI_IOC3_ETH=y
CONFIG_SERIO_SGI_IOC3=y
CONFIG_SERIAL_8250_IOC3=y
CONFIG_SGI_MFD_IOC3=y

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]