[PATCH v2 0/2] phy: qcom: qmp-pcie: Add support for Gen4 4-lane mode for X1E80100

[PATCH v2 0/2] phy: qcom: qmp-pcie: Add support for Gen4 4-lane mode for X1E80100

[Abel Vesa]

On all X Elite boards currently supported upstream, the NVMe sits
on the PCIe 6. Until now that has been configured in dual lane mode
only. The schematics reveal that the NVMe is actually using 4 lanes.
So add support for the 4-lane mode and document the compatible for it.

This patchset depends on:
https://lore.kernel.org/all/20240805-phy-qcom-qmp-pcie-write-all-tbls-second-port-v3-1-6967c6bf61d1@linaro.org/

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
Changes in v2:
- Re-worded the commit message following Johan's suggestions.
- Picked up Krzysztof's R-b tag for the bindings patch
- Link to v1: https://lore.kernel.org/r/20240531-x1e80100-phy-add-gen4x4-v1-0-5c841dae7850@linaro.org

---
Abel Vesa (2):
      dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x4
      phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100

 .../bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml   |  3 ++
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c           | 42 ++++++++++++++++++++++
 2 files changed, 45 insertions(+)
---
base-commit: 81528d2de965dafd6911a0f9a975fc30b25e7080
change-id: 20240531-x1e80100-phy-add-gen4x4-fa830a5505b6

Best regards,
-- 
Abel Vesa <abel.vesa@linaro.org>

[PATCH v2 1/2] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x4

[Abel Vesa]

The sixth PCIe instance on X1E80100 can be used in either 4-lane mode or
2-lane mode. Document the 4-lane mode as a separate compatible.

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
index 03dbd02cf9e7..dcf4fa55fbba 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
@@ -40,6 +40,7 @@ properties:
       - qcom,sm8650-qmp-gen4x2-pcie-phy
       - qcom,x1e80100-qmp-gen3x2-pcie-phy
       - qcom,x1e80100-qmp-gen4x2-pcie-phy
+      - qcom,x1e80100-qmp-gen4x4-pcie-phy
 
   reg:
     minItems: 1
@@ -118,6 +119,7 @@ allOf:
           contains:
             enum:
               - qcom,sc8280xp-qmp-gen3x4-pcie-phy
+              - qcom,x1e80100-qmp-gen4x4-pcie-phy
     then:
       properties:
         reg:
@@ -169,6 +171,7 @@ allOf:
               - qcom,sc8280xp-qmp-gen3x1-pcie-phy
               - qcom,sc8280xp-qmp-gen3x2-pcie-phy
               - qcom,sc8280xp-qmp-gen3x4-pcie-phy
+              - qcom,x1e80100-qmp-gen4x4-pcie-phy
     then:
       properties:
         clocks:

-- 
2.34.1

Re: [PATCH v2 1/2] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x4

[Johan Hovold]

On Wed, Aug 21, 2024 at 11:39:00AM +0300, Abel Vesa wrote:
> The sixth PCIe instance on X1E80100 can be used in either 4-lane mode or
> 2-lane mode. Document the 4-lane mode as a separate compatible.
> 
> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>

[PATCH v2 2/2] phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100

[Abel Vesa]

The sixth PCIe controller on X1E80100 can be used in either
4-lanes mode or 2-lanes mode. Add the configuration and compatible
for the 4-lane mode.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 42 ++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index a7e2ce0c500d..df1ebc19c117 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -1266,6 +1266,10 @@ static const struct qmp_phy_init_tbl x1e80100_qmp_gen4x2_pcie_ln_shrd_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_SUMMER_CAL_SPD_MODE, 0x5b),
 };
 
+static const struct qmp_phy_init_tbl x1e80100_qmp_gen4x4_pcie_serdes_4ln_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_BIAS_EN_CLK_BUFLR_EN, 0x1c),
+};
+
 static const struct qmp_phy_init_tbl x1e80100_qmp_gen4x2_pcie_tx_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_TX, 0x1d),
 	QMP_PHY_INIT_CFG(QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_RX, 0x03),
@@ -3654,6 +3658,41 @@ static const struct qmp_phy_cfg x1e80100_qmp_gen4x2_pciephy_cfg = {
 		.ln_shrd		= x1e80100_qmp_gen4x2_pcie_ln_shrd_tbl,
 		.ln_shrd_num		= ARRAY_SIZE(x1e80100_qmp_gen4x2_pcie_ln_shrd_tbl),
 	},
+
+	.reset_list		= sdm845_pciephy_reset_l,
+	.num_resets		= ARRAY_SIZE(sdm845_pciephy_reset_l),
+	.vreg_list		= sm8550_qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(sm8550_qmp_phy_vreg_l),
+	.regs			= pciephy_v6_regs_layout,
+
+	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
+	.phy_status		= PHYSTATUS_4_20,
+	.has_nocsr_reset	= true,
+};
+
+static const struct qmp_phy_cfg x1e80100_qmp_gen4x4_pciephy_cfg = {
+	.lanes = 4,
+
+	.offsets		= &qmp_pcie_offsets_v6_20,
+
+	.tbls = {
+		.serdes			= x1e80100_qmp_gen4x2_pcie_serdes_tbl,
+		.serdes_num		= ARRAY_SIZE(x1e80100_qmp_gen4x2_pcie_serdes_tbl),
+		.tx			= x1e80100_qmp_gen4x2_pcie_tx_tbl,
+		.tx_num			= ARRAY_SIZE(x1e80100_qmp_gen4x2_pcie_tx_tbl),
+		.rx			= x1e80100_qmp_gen4x2_pcie_rx_tbl,
+		.rx_num			= ARRAY_SIZE(x1e80100_qmp_gen4x2_pcie_rx_tbl),
+		.pcs			= x1e80100_qmp_gen4x2_pcie_pcs_tbl,
+		.pcs_num		= ARRAY_SIZE(x1e80100_qmp_gen4x2_pcie_pcs_tbl),
+		.pcs_misc		= x1e80100_qmp_gen4x2_pcie_pcs_misc_tbl,
+		.pcs_misc_num		= ARRAY_SIZE(x1e80100_qmp_gen4x2_pcie_pcs_misc_tbl),
+		.ln_shrd		= x1e80100_qmp_gen4x2_pcie_ln_shrd_tbl,
+		.ln_shrd_num		= ARRAY_SIZE(x1e80100_qmp_gen4x2_pcie_ln_shrd_tbl),
+	},
+
+	.serdes_4ln_tbl		= x1e80100_qmp_gen4x4_pcie_serdes_4ln_tbl,
+	.serdes_4ln_num		= ARRAY_SIZE(x1e80100_qmp_gen4x4_pcie_serdes_4ln_tbl),
+
 	.reset_list		= sdm845_pciephy_reset_l,
 	.num_resets		= ARRAY_SIZE(sdm845_pciephy_reset_l),
 	.vreg_list		= sm8550_qmp_phy_vreg_l,
@@ -4436,6 +4475,9 @@ static const struct of_device_id qmp_pcie_of_match_table[] = {
 	}, {
 		.compatible = "qcom,x1e80100-qmp-gen4x2-pcie-phy",
 		.data = &x1e80100_qmp_gen4x2_pciephy_cfg,
+	}, {
+		.compatible = "qcom,x1e80100-qmp-gen4x4-pcie-phy",
+		.data = &x1e80100_qmp_gen4x4_pciephy_cfg,
 	},
 	{ },
 };

-- 
2.34.1

Re: [PATCH v2 2/2] phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100

[Johan Hovold]

On Wed, Aug 21, 2024 at 11:39:01AM +0300, Abel Vesa wrote:
> The sixth PCIe controller on X1E80100 can be used in either
> 4-lanes mode or 2-lanes mode. Add the configuration and compatible
> for the 4-lane mode.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 42 ++++++++++++++++++++++++++++++++
>  1 file changed, 42 insertions(+)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> index a7e2ce0c500d..df1ebc19c117 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> @@ -1266,6 +1266,10 @@ static const struct qmp_phy_init_tbl x1e80100_qmp_gen4x2_pcie_ln_shrd_tbl[] = {
>  	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_SUMMER_CAL_SPD_MODE, 0x5b),
>  };
>  
> +static const struct qmp_phy_init_tbl x1e80100_qmp_gen4x4_pcie_serdes_4ln_tbl[] = {
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_BIAS_EN_CLK_BUFLR_EN, 0x1c),
> +};

Nit: This is a serdes subtable (override) so should go under the serdes
table above (not ln_shrd).

Looks good otherwise:

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>

Johan