From: Adrian Hunter <adrian.hunter@intel.com>
To: Tanmay Kathpalia <tanmay.kathpalia@altera.com>,
<linux-mmc@vger.kernel.org>
Cc: <ulf.hansson@linaro.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v1 7/9] mmc: sdhci-cadence: refactor driver structure for V6 controller support
Date: Tue, 19 May 2026 18:29:47 +0300 [thread overview]
Message-ID: <a02576b9-4068-4686-b59b-71cecd319f39@intel.com> (raw)
In-Reply-To: <20260511202132.5597-8-tanmay.kathpalia@altera.com>
On 11/05/2026 23:21, Tanmay Kathpalia wrote:
> Refactor the sdhci-cadence driver in preparation for adding SD6HC
> (V6 controller) support. Separate PHY parameter handling into a
> dedicated sdhci_cdns4_phy structure and move PHY initialization
> logic into a dedicated sdhci_cdns4_phy_probe() function. This
> allows different controller versions to manage their PHY
> configurations independently while keeping shared logic in the
> main driver.
>
> Each compatible entry now carries its own driver data, so drop the
> silent fallback to sdhci_cdns4_drv_data and return an error if
> platform data is missing.
>
> Signed-off-by: Tanmay Kathpalia <tanmay.kathpalia@altera.com>
A few minor style comments below
> ---
> drivers/mmc/host/sdhci-cadence.c | 57 ++++++++++++++++++++++----------
> 1 file changed, 40 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-cadence.c b/drivers/mmc/host/sdhci-cadence.c
> index 47690a52a221..fe3f7c5109fc 100644
> --- a/drivers/mmc/host/sdhci-cadence.c
> +++ b/drivers/mmc/host/sdhci-cadence.c
> @@ -83,6 +83,11 @@ struct sdhci_cdns4_phy_param {
> u8 data;
> };
>
> +struct sdhci_cdns4_phy {
> + unsigned int nr_phy_params;
> + struct sdhci_cdns4_phy_param phy_params[];
> +};
> +
> struct sdhci_cdns_priv {
> void __iomem *hrs_addr;
> void __iomem *ctl_addr; /* write control */
> @@ -90,8 +95,7 @@ struct sdhci_cdns_priv {
> bool enhanced_strobe;
> void (*priv_writel)(struct sdhci_cdns_priv *priv, u32 val, void __iomem *reg);
> struct reset_control *rst_hw;
> - unsigned int nr_phy_params;
> - struct sdhci_cdns4_phy_param phy_params[];
> + struct sdhci_cdns4_phy *phy;
> };
>
> struct sdhci_cdns4_phy_cfg {
> @@ -169,9 +173,9 @@ static unsigned int sdhci_cdns4_phy_param_count(struct device_node *np)
> }
>
> static void sdhci_cdns4_phy_param_parse(struct device_node *np,
> - struct sdhci_cdns_priv *priv)
> + struct sdhci_cdns4_phy *phy)
> {
> - struct sdhci_cdns4_phy_param *p = priv->phy_params;
> + struct sdhci_cdns4_phy_param *p = phy->phy_params;
> u32 val;
> int ret, i;
>
> @@ -190,10 +194,11 @@ static void sdhci_cdns4_phy_param_parse(struct device_node *np,
> static int sdhci_cdns4_phy_init(struct sdhci_cdns_priv *priv)
> {
> int ret, i;
> + struct sdhci_cdns4_phy *phy = priv->phy;
Nicer to place locals in reverse order of line length e.g.
+ struct sdhci_cdns4_phy *phy = priv->phy;
int ret, i;
>
> - for (i = 0; i < priv->nr_phy_params; i++) {
> - ret = sdhci_cdns4_write_phy_reg(priv, priv->phy_params[i].addr,
> - priv->phy_params[i].data);
> + for (i = 0; i < phy->nr_phy_params; i++) {
> + ret = sdhci_cdns4_write_phy_reg(priv, phy->phy_params[i].addr,
> + phy->phy_params[i].data);
> if (ret)
> return ret;
> }
> @@ -542,6 +547,26 @@ static void sdhci_cdns_mmc_hw_reset(struct mmc_host *mmc)
> usleep_range(300, 1000);
> }
>
> +static int sdhci_cdns4_phy_probe(struct platform_device *pdev,
> + struct sdhci_cdns_priv *priv)
Please wrap after 100 columns not 80
> +{
> + unsigned int nr_phy_params;
> + struct sdhci_cdns4_phy *phy;
> + struct device *dev = &pdev->dev;
Nicer to place locals in reverse order of line length e.g.
+ struct device *dev = &pdev->dev;
+ struct sdhci_cdns4_phy *phy;
+ unsigned int nr_phy_params;
> +
> + nr_phy_params = sdhci_cdns4_phy_param_count(dev->of_node);
> + phy = devm_kzalloc(dev, struct_size(phy, phy_params, nr_phy_params),
> + GFP_KERNEL);
Please wrap after 100 columns not 80
> + if (!phy)
> + return -ENOMEM;
> +
> + phy->nr_phy_params = nr_phy_params;
> + sdhci_cdns4_phy_param_parse(dev->of_node, phy);
> + priv->phy = phy;
> +
> + return sdhci_cdns4_phy_init(priv);
> +}
> +
> static int sdhci_cdns_probe(struct platform_device *pdev)
> {
> struct sdhci_host *host;
> @@ -549,7 +574,6 @@ static int sdhci_cdns_probe(struct platform_device *pdev)
> struct sdhci_pltfm_host *pltfm_host;
> struct sdhci_cdns_priv *priv;
> struct clk *clk;
> - unsigned int nr_phy_params;
> int ret;
> struct device *dev = &pdev->dev;
> static const u16 version = SDHCI_SPEC_400 << SDHCI_SPEC_VER_SHIFT;
> @@ -560,11 +584,10 @@ static int sdhci_cdns_probe(struct platform_device *pdev)
>
> data = of_device_get_match_data(dev);
> if (!data)
> - data = &sdhci_cdns4_drv_data;
> + return dev_err_probe(dev, -EINVAL,
> + "missing platform driver data\n");
Please wrap after 100 columns not 80
>
> - nr_phy_params = sdhci_cdns4_phy_param_count(dev->of_node);
> - host = sdhci_pltfm_init(pdev, &data->pltfm_data,
> - struct_size(priv, phy_params, nr_phy_params));
> + host = sdhci_pltfm_init(pdev, &data->pltfm_data, sizeof(*priv));
> if (IS_ERR(host))
> return PTR_ERR(host);
>
> @@ -572,7 +595,6 @@ static int sdhci_cdns_probe(struct platform_device *pdev)
> pltfm_host->clk = clk;
>
> priv = sdhci_pltfm_priv(pltfm_host);
> - priv->nr_phy_params = nr_phy_params;
> priv->hrs_addr = host->ioaddr;
> priv->enhanced_strobe = false;
> priv->priv_writel = cdns_writel;
> @@ -593,9 +615,7 @@ static int sdhci_cdns_probe(struct platform_device *pdev)
> if (ret)
> return ret;
>
> - sdhci_cdns4_phy_param_parse(dev->of_node, priv);
> -
> - ret = sdhci_cdns4_phy_init(priv);
> + ret = sdhci_cdns4_phy_probe(pdev, priv);
> if (ret)
> return ret;
>
> @@ -653,7 +673,10 @@ static const struct of_device_id sdhci_cdns_match[] = {
> .compatible = "mobileye,eyeq-sd4hc",
> .data = &sdhci_eyeq_drv_data,
> },
> - { .compatible = "cdns,sd4hc" },
> + {
> + .compatible = "cdns,sd4hc",
> + .data = &sdhci_cdns4_drv_data,
> + },
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, sdhci_cdns_match);
next prev parent reply other threads:[~2026-05-19 15:30 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20260511202132.5597-1-tanmay.kathpalia@altera.com>
2026-05-11 20:21 ` [PATCH v1 1/9] dt-bindings: reset: altr: add COMBOPHY_RESET for Agilex5 Tanmay Kathpalia
2026-05-12 17:33 ` Conor Dooley
2026-06-18 10:48 ` Philipp Zabel
2026-05-11 20:21 ` [PATCH v1 2/9] dt-bindings: mmc: cdns,sdhci: add SD6HC support and PHY properties Tanmay Kathpalia
2026-05-12 17:33 ` Conor Dooley
2026-05-11 20:21 ` [PATCH v1 3/9] arm64: dts: agilex5: add Cadence SD6HC controller and SOCDK enablement Tanmay Kathpalia
2026-05-15 8:38 ` Krzysztof Kozlowski
2026-05-21 17:56 ` Kathpalia, Tanmay
2026-05-11 20:21 ` [PATCH v1 4/9] dt-bindings: arm: intel: add Agilex5 SOCDK eMMC board variant Tanmay Kathpalia
2026-05-11 20:21 ` [PATCH v1 5/9] arm64: dts: agilex5: add SOCDK eMMC daughter board support Tanmay Kathpalia
2026-05-15 8:37 ` Krzysztof Kozlowski
2026-05-22 6:30 ` Kathpalia, Tanmay
2026-05-11 20:21 ` [PATCH v1 6/9] mmc: sdhci-cadence: rename V4 functions for V6 controller groundwork Tanmay Kathpalia
2026-05-19 15:29 ` Adrian Hunter
2026-05-21 15:53 ` Kathpalia, Tanmay
2026-05-21 16:16 ` Adrian Hunter
2026-05-11 20:21 ` [PATCH v1 7/9] mmc: sdhci-cadence: refactor driver structure for V6 controller support Tanmay Kathpalia
2026-05-19 15:29 ` Adrian Hunter [this message]
2026-05-21 17:41 ` Kathpalia, Tanmay
2026-05-11 20:21 ` [PATCH v1 8/9] mmc: sdhci-cadence: add Cadence SD6HC support Tanmay Kathpalia
2026-05-19 15:29 ` Adrian Hunter
2026-05-21 17:28 ` Kathpalia, Tanmay
2026-05-22 5:32 ` Adrian Hunter
2026-05-22 6:34 ` Kathpalia, Tanmay
2026-05-11 20:21 ` [PATCH v1 9/9] mmc: sdhci-cadence: add Altera Agilex5 " Tanmay Kathpalia
2026-05-27 21:01 ` Zach Miller
2026-06-01 11:54 ` Kathpalia, Tanmay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a02576b9-4068-4686-b59b-71cecd319f39@intel.com \
--to=adrian.hunter@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=tanmay.kathpalia@altera.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®