Re: [PATCH 2/2] drm/msm/dpu: Set input_sel bit for INTF

[Abhinav Kumar <quic_abhinavk@quicinc.com>]

On 11/30/2023 11:36 PM, Dmitry Baryshkov wrote:
> On Fri, 1 Dec 2023 at 03:31, Jessica Zhang <quic_jesszhan@quicinc.com> wrote:
>>
>> Set the input_sel bit for encoders as it was missed in the initial
>> implementation.
>>
>> Reported-by: Rob Clark <robdclark@gmail.com>
>> Fixes: 91143873a05d ("drm/msm/dpu: Add MISR register support for interface")
>> Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/39
>> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
>> ---
>>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c | 2 +-
>>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c   | 2 +-
>>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.c | 7 ++++++-
>>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h | 4 +++-
>>   4 files changed, 11 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
>> index 3442cf65b86f..d0884997ecb7 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
>> @@ -320,7 +320,7 @@ static u32 dpu_hw_intf_get_line_count(struct dpu_hw_intf *intf)
>>
>>   static void dpu_hw_intf_setup_misr(struct dpu_hw_intf *intf)
>>   {
>> -       dpu_hw_setup_misr(&intf->hw, INTF_MISR_CTRL);
>> +       dpu_hw_setup_misr(&intf->hw, INTF_MISR_CTRL, true);
>>   }
>>
>>   static int dpu_hw_intf_collect_misr(struct dpu_hw_intf *intf, u32 *misr_value)
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c
>> index f38473e68f79..77b14107c84a 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c
>> @@ -83,7 +83,7 @@ static void dpu_hw_lm_setup_border_color(struct dpu_hw_mixer *ctx,
>>
>>   static void dpu_hw_lm_setup_misr(struct dpu_hw_mixer *ctx)
>>   {
>> -       dpu_hw_setup_misr(&ctx->hw, LM_MISR_CTRL);
>> +       dpu_hw_setup_misr(&ctx->hw, LM_MISR_CTRL, false);
>>   }
>>
>>   static int dpu_hw_lm_collect_misr(struct dpu_hw_mixer *ctx, u32 *misr_value)
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.c
>> index a8a0a4e76b94..f441df47fdde 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.c
>> @@ -481,7 +481,8 @@ void _dpu_hw_setup_qos_lut(struct dpu_hw_blk_reg_map *c, u32 offset,
>>                        cfg->danger_safe_en ? QOS_QOS_CTRL_DANGER_SAFE_EN : 0);
>>   }
>>
>> -void dpu_hw_setup_misr(struct dpu_hw_blk_reg_map *c, u32 misr_ctrl_offset)
>> +void dpu_hw_setup_misr(struct dpu_hw_blk_reg_map *c, u32 misr_ctrl_offset,
>> +               bool set_input_sel)
>>   {
>>          u32 config = 0;
>>
>> @@ -491,6 +492,10 @@ void dpu_hw_setup_misr(struct dpu_hw_blk_reg_map *c, u32 misr_ctrl_offset)
>>          wmb();
>>
>>          config = MISR_FRAME_COUNT | MISR_CTRL_ENABLE | MISR_CTRL_FREE_RUN_MASK;
>> +
>> +       if (set_input_sel)
>> +               config |= MISR_CTRL_INPUT_SEL;
>> +
>>          DPU_REG_WRITE(c, misr_ctrl_offset, config);
>>   }
>>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h
>> index bb496ebe283b..793670d62414 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h
>> @@ -17,6 +17,7 @@
>>   #define MISR_CTRL_ENABLE                BIT(8)
>>   #define MISR_CTRL_STATUS                BIT(9)
>>   #define MISR_CTRL_STATUS_CLEAR          BIT(10)
>> +#define MISR_CTRL_INPUT_SEL             BIT(24)
> 
> The public apq8916 TRM documents this as a 4-bit field. I think this
> was followed into the later generations. Can we please document it
> correctly and use an uint instead of just bool for set_input_sel?
> 

Can you pls point us to this document you are referring?

I was not aware that bit level details are revealed in external documents :)

Even though its a 4-bit field, it only takes a 0 or 1 as others are 
undefined.

Exposing all the bits will only cause more confusion like it did for 
others thinking that input select is actually configurable when its not.

I think what we should do is just pass "misr_type" to this API to tell 
whether its lm misr or intf misr and set BIT(24) based on that.


>>   #define MISR_CTRL_FREE_RUN_MASK         BIT(31)
>>
>>   /*
>> @@ -357,7 +358,8 @@ void _dpu_hw_setup_qos_lut(struct dpu_hw_blk_reg_map *c, u32 offset,
>>                             bool qos_8lvl,
>>                             const struct dpu_hw_qos_cfg *cfg);
>>
>> -void dpu_hw_setup_misr(struct dpu_hw_blk_reg_map *c, u32 misr_ctrl_offset);
>> +void dpu_hw_setup_misr(struct dpu_hw_blk_reg_map *c, u32 misr_ctrl_offset,
>> +                      bool set_input_sel);
>>
>>   int dpu_hw_collect_misr(struct dpu_hw_blk_reg_map *c,
>>                  u32 misr_ctrl_offset,
>>
>> --
>> 2.43.0
>>
> 
>