* "INFO: possible irq lock inversion dependency detected" in 2.6.29-git2
[not found] <a0adeea50903271928u714dc8b4j5fcb6826432c5089@mail.gmail.com>
@ 2009-03-28 2:32 ` Grissiom
0 siblings, 0 replies; only message in thread
From: Grissiom @ 2009-03-28 2:32 UTC (permalink / raw)
To: linux-kernel; +Cc: chaos.proton
[-- Attachment #1: Type: text/plain, Size: 12583 bytes --]
Hi all,
The attachment is the full dmesg. Key section follow:
[ 133.276235]
[ 133.276243] =========================================================
[ 133.276253] [ INFO: possible irq lock inversion dependency detected ]
[ 133.276262] 2.6.29-g14-rfkill-nophy-ledon-03652-g5d80f8e #87
[ 133.276268] ---------------------------------------------------------
[ 133.276274] swapper/0 just changed the state of lock:
[ 133.276281] (fasync_lock){..+.}, at: [<c01b7107>] kill_fasync+0x27/0x50
[ 133.276303] but this lock took another, hard-irq-unsafe lock in the past:
[ 133.276310] (&f->f_lock){--..}
[ 133.276316]
[ 133.276317] and interrupts could create inverse lock ordering between them.
[ 133.276321]
[ 133.276326]
[ 133.276327] other info that might help us debug this:
[ 133.276334] 4 locks held by swapper/0:
[ 133.276338] #0: (&serio->lock){++..}, at: [<c039c281>]
serio_interrupt+0x21/0x80
[ 133.276358] #1: (&dev->event_lock){++..}, at: [<c03a0ac0>]
input_event+0x40/0x70
[ 133.276373] #2: (rcu_read_lock){..--}, at: [<c039f220>]
input_pass_event+0x0/0xf0
[ 133.276390] #3: (rcu_read_lock){..--}, at: [<c03a3be0>]
evdev_event+0x0/0x110
[ 133.276407]
[ 133.276408] the first lock's dependencies:
[ 133.276413] -> (fasync_lock){..+.} ops: 0 {
[ 133.276425] initial-use at:
[ 133.276432] [<c0153761>]
__lock_acquire+0x151/0x1920
[ 133.276448] [<c0154f8e>]
lock_acquire+0x5e/0x80
[ 133.276459] [<c0506293>]
_write_lock_irq+0x43/0x50
[ 133.276472] [<c01b6b84>]
fasync_helper+0x24/0x140
[ 133.276483] [<c02d5775>]
tty_fasync+0x65/0x120
[ 133.276494] [<c02d7e66>]
tty_release_dev+0x66/0x4f0
[ 133.276505] [<c02d8302>]
tty_release+0x12/0x20
[ 133.276514] [<c01abe32>]
__fput+0xc2/0x1b0
[ 133.276526] [<c01abf3f>]
fput+0x1f/0x30
[ 133.276536] [<c01a8e17>]
filp_close+0x47/0x70
[ 133.276548] [<c01a8eb0>]
sys_close+0x70/0xd0
[ 133.276558] [<c010351a>]
syscall_call+0x7/0xb
[ 133.276570] [<ffffffff>] 0xffffffff
[ 133.276582] in-hardirq-R at:
[ 133.276587] [<c0153d0c>]
__lock_acquire+0x6fc/0x1920
[ 133.276598] [<c0154f8e>]
lock_acquire+0x5e/0x80
[ 133.276608] [<c050643d>]
_read_lock+0x3d/0x50
[ 133.276618] [<c01b7107>]
kill_fasync+0x27/0x50
[ 133.276629] [<c03a38ef>]
evdev_pass_event+0x6f/0x80
[ 133.276638] [<c03a3c52>]
evdev_event+0x72/0x110
[ 133.276648] [<c039f284>]
input_pass_event+0x64/0xf0
[ 133.276659] [<c039f70d>]
input_handle_event+0x7d/0x420
[ 133.276670] [<c03a0ae0>]
input_event+0x60/0x70
[ 133.276679] [<c03a87a6>]
synaptics_process_byte+0x476/0x860
[ 133.276692] [<c03a6a7f>]
psmouse_handle_byte+0xf/0x110
[ 133.276703] [<c03a7874>]
psmouse_interrupt+0xc4/0x2b0
[ 133.276714] [<c039c29b>]
serio_interrupt+0x3b/0x80
[ 133.276724] [<c039d2e3>]
i8042_interrupt+0xb3/0x250
[ 133.276735] [<c016f6d9>]
handle_IRQ_event+0x39/0xa0
[ 133.276746] [<c0170ded>]
handle_edge_irq+0xad/0x140
[ 133.276756] [<c0104f9b>]
do_IRQ+0x4b/0x90
[ 133.276767] [<c0103aac>]
common_interrupt+0x2c/0x34
[ 133.276777] [<c010966b>]
c1e_idle+0x9b/0x100
[ 133.276788] [<c0102370>]
cpu_idle+0x70/0xb0
[ 133.276798] [<c04f2547>]
rest_init+0x67/0x70
[ 133.276809] [<ffffffff>] 0xffffffff
[ 133.276817] }
[ 133.276821] ... key at: [<c068f6c4>] fasync_lock+0x10/0x1c
[ 133.276834] -> (&f->f_lock){--..} ops: 0 {
[ 133.276845] initial-use at:
[ 133.276851] [<c0153761>]
__lock_acquire+0x151/0x1920
[ 133.276862] [<c0154f8e>]
lock_acquire+0x5e/0x80
[ 133.276872] [<c050609d>]
_spin_lock+0x3d/0x50
[ 133.276883] [<c01b6bc8>]
fasync_helper+0x68/0x140
[ 133.276893] [<c02d5775>]
tty_fasync+0x65/0x120
[ 133.276902] [<c02d7e66>]
tty_release_dev+0x66/0x4f0
[ 133.276912] [<c02d8302>]
tty_release+0x12/0x20
[ 133.276921] [<c01abe32>]
__fput+0xc2/0x1b0
[ 133.276931] [<c01abf3f>]
fput+0x1f/0x30
[ 133.276941] [<c01a8e17>]
filp_close+0x47/0x70
[ 133.276951] [<c01a8eb0>]
sys_close+0x70/0xd0
[ 133.276961] [<c010351a>]
syscall_call+0x7/0xb
[ 133.276970] [<ffffffff>] 0xffffffff
[ 133.276979] softirq-on-W at:
[ 133.276984] [<c0153bed>]
__lock_acquire+0x5dd/0x1920
[ 133.276995] [<c0154f8e>]
lock_acquire+0x5e/0x80
[ 133.277006] [<c050609d>]
_spin_lock+0x3d/0x50
[ 133.277016] [<c01b7649>]
do_fcntl+0x329/0x3f0
[ 133.277027] [<c01b7752>]
sys_fcntl64+0x42/0x90
[ 133.277037] [<c010351a>]
syscall_call+0x7/0xb
[ 133.277046] [<ffffffff>] 0xffffffff
[ 133.277054] hardirq-on-W at:
[ 133.277059] [<c0153bc7>]
__lock_acquire+0x5b7/0x1920
[ 133.277069] [<c0154f8e>]
lock_acquire+0x5e/0x80
[ 133.277079] [<c050609d>]
_spin_lock+0x3d/0x50
[ 133.277089] [<c01b7649>]
do_fcntl+0x329/0x3f0
[ 133.277099] [<c01b7752>]
sys_fcntl64+0x42/0x90
[ 133.277109] [<c010351a>]
syscall_call+0x7/0xb
[ 133.277118] [<ffffffff>] 0xffffffff
[ 133.277127] }
[ 133.277130] ... key at: [<c0b2c388>] __key.20023+0x0/0x8
[ 133.277140] ... acquired at:
[ 133.277144] [<c01545ab>] __lock_acquire+0xf9b/0x1920
[ 133.277154] [<c0154f8e>] lock_acquire+0x5e/0x80
[ 133.277162] [<c050609d>] _spin_lock+0x3d/0x50
[ 133.277171] [<c01b6bc8>] fasync_helper+0x68/0x140
[ 133.277180] [<c02d5775>] tty_fasync+0x65/0x120
[ 133.277188] [<c02d7e66>] tty_release_dev+0x66/0x4f0
[ 133.277196] [<c02d8302>] tty_release+0x12/0x20
[ 133.277203] [<c01abe32>] __fput+0xc2/0x1b0
[ 133.277212] [<c01abf3f>] fput+0x1f/0x30
[ 133.277220] [<c01a8e17>] filp_close+0x47/0x70
[ 133.277228] [<c01a8eb0>] sys_close+0x70/0xd0
[ 133.277237] [<c010351a>] syscall_call+0x7/0xb
[ 133.277245] [<ffffffff>] 0xffffffff
[ 133.277252]
[ 133.277255]
[ 133.277256] the second lock's dependencies:
[ 133.277261] -> (&f->f_lock){--..} ops: 0 {
[ 133.277272] initial-use at:
[ 133.277277] [<c0153761>]
__lock_acquire+0x151/0x1920
[ 133.277287] [<c0154f8e>]
lock_acquire+0x5e/0x80
[ 133.277297] [<c050609d>]
_spin_lock+0x3d/0x50
[ 133.277307] [<c01b6bc8>]
fasync_helper+0x68/0x140
[ 133.277317] [<c02d5775>]
tty_fasync+0x65/0x120
[ 133.277326] [<c02d7e66>]
tty_release_dev+0x66/0x4f0
[ 133.277336] [<c02d8302>]
tty_release+0x12/0x20
[ 133.277345] [<c01abe32>]
__fput+0xc2/0x1b0
[ 133.277355] [<c01abf3f>]
fput+0x1f/0x30
[ 133.277365] [<c01a8e17>]
filp_close+0x47/0x70
[ 133.277375] [<c01a8eb0>]
sys_close+0x70/0xd0
[ 133.277384] [<c010351a>]
syscall_call+0x7/0xb
[ 133.277394] [<ffffffff>] 0xffffffff
[ 133.277402] softirq-on-W at:
[ 133.277408] [<c0153bed>]
__lock_acquire+0x5dd/0x1920
[ 133.277418] [<c0154f8e>]
lock_acquire+0x5e/0x80
[ 133.277429] [<c050609d>]
_spin_lock+0x3d/0x50
[ 133.277439] [<c01b7649>]
do_fcntl+0x329/0x3f0
[ 133.277449] [<c01b7752>]
sys_fcntl64+0x42/0x90
[ 133.277459] [<c010351a>]
syscall_call+0x7/0xb
[ 133.277468] [<ffffffff>] 0xffffffff
[ 133.277476] hardirq-on-W at:
[ 133.277482] [<c0153bc7>]
__lock_acquire+0x5b7/0x1920
[ 133.277492] [<c0154f8e>]
lock_acquire+0x5e/0x80
[ 133.277504] [<c050609d>]
_spin_lock+0x3d/0x50
[ 133.277514] [<c01b7649>]
do_fcntl+0x329/0x3f0
[ 133.277524] [<c01b7752>]
sys_fcntl64+0x42/0x90
[ 133.277534] [<c010351a>]
syscall_call+0x7/0xb
[ 133.277544] [<ffffffff>] 0xffffffff
[ 133.277552] }
[ 133.277556] ... key at: [<c0b2c388>] __key.20023+0x0/0x8
[ 133.277564]
[ 133.277565] stack backtrace:
[ 133.277573] Pid: 0, comm: swapper Not tainted
2.6.29-g14-rfkill-nophy-ledon-03652-g5d80f8e #87
[ 133.277580] Call Trace:
[ 133.277588] [<c0502887>] ? printk+0x18/0x1a
[ 133.277598] [<c0151b6d>] print_irq_inversion_bug+0x11d/0x190
[ 133.277607] [<c0151c47>] check_usage_forwards+0x67/0xb0
[ 133.277616] [<c0150f9a>] ? save_trace+0x3a/0xa0
[ 133.277624] [<c015223d>] mark_lock+0x4fd/0xc30
[ 133.277633] [<c0153d0c>] __lock_acquire+0x6fc/0x1920
[ 133.277643] [<c0154f8e>] lock_acquire+0x5e/0x80
[ 133.277651] [<c01b7107>] ? kill_fasync+0x27/0x50
[ 133.277660] [<c050643d>] _read_lock+0x3d/0x50
[ 133.277669] [<c01b7107>] ? kill_fasync+0x27/0x50
[ 133.277677] [<c01b7107>] kill_fasync+0x27/0x50
[ 133.277685] [<c03a38ef>] evdev_pass_event+0x6f/0x80
[ 133.277693] [<c03a3c52>] evdev_event+0x72/0x110
[ 133.277700] [<c03a3be0>] ? evdev_event+0x0/0x110
[ 133.277710] [<c039f284>] input_pass_event+0x64/0xf0
[ 133.277719] [<c039f220>] ? input_pass_event+0x0/0xf0
[ 133.277729] [<c039f70d>] input_handle_event+0x7d/0x420
[ 133.277736] [<c03a0ae0>] input_event+0x60/0x70
[ 133.277745] [<c03a87a6>] synaptics_process_byte+0x476/0x860
[ 133.277755] [<c03a6a7f>] psmouse_handle_byte+0xf/0x110
[ 133.277764] [<c03a7874>] psmouse_interrupt+0xc4/0x2b0
[ 133.277773] [<c050619d>] ? _spin_lock_irqsave+0x4d/0x60
[ 133.277782] [<c039c29b>] serio_interrupt+0x3b/0x80
[ 133.277791] [<c039d2e3>] i8042_interrupt+0xb3/0x250
[ 133.277799] [<c016f6d9>] handle_IRQ_event+0x39/0xa0
[ 133.277808] [<c0170ded>] handle_edge_irq+0xad/0x140
[ 133.277816] [<c0104f9b>] do_IRQ+0x4b/0x90
[ 133.277824] [<c0103aac>] common_interrupt+0x2c/0x34
[ 133.277833] [<c01094b7>] ? default_idle+0x57/0x60
[ 133.277842] [<c010966b>] c1e_idle+0x9b/0x100
[ 133.277850] [<c0102370>] cpu_idle+0x70/0xb0
[ 133.277857] [<c04f2547>] rest_init+0x67/0x70
[-- Attachment #2: dmesg --]
[-- Type: application/octet-stream, Size: 53319 bytes --]
[ 0.000000] Linux version 2.6.29-g14-rfkill-nophy-ledon-03652-g5d80f8e (grissiom@grissiom_slackware) (gcc version 4.3.3 (GCC) ) #87 SMP PREEMPT Sat Mar 28 09:55:44 CST 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] AMD AuthenticAMD
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000037e70000 (usable)
[ 0.000000] BIOS-e820: 0000000037e70000 - 0000000037e80000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000037e80000 - 0000000037f00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x37e70 max_arch_pfn = 0x100000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] ACPI: RSDP 000F8500, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 37E79539, 0040 (r1 DELL M08 6040000 LTP 0)
[ 0.000000] ACPI: FACP 37E7FB58, 0074 (r1 ATI Bowfin 6040000 ATI F4240)
[ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
[ 0.000000] FADT: X_PM1b_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
[ 0.000000] ACPI: DSDT 37E79579, 65DF (r1 ATI SB600 6040000 MSFT 3000000)
[ 0.000000] ACPI: FACS 37E90FC0, 0040
[ 0.000000] ACPI: TCPA 37E7FBCC, 0032 (r2 AMD 6040000 PTEC 0)
[ 0.000000] ACPI: SSDT 37E7FBFE, 01C4 (r1 PTLTD POWERNOW 6040000 LTP 1)
[ 0.000000] ACPI: APIC 37E7FDC2, 0054 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: MCFG 37E7FE16, 003C (r1 PTLTD MCFG 6040000 LTP 0)
[ 0.000000] ACPI: HPET 37E7FE52, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
[ 0.000000] ACPI: SLIC 37E7FE8A, 0176 (r1 DELL M08 6040000 LTP 0)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 6MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 00000000 - 377fe000
[ 0.000000] bootmap 00008000 - 0000ef00
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 0000b43df8] TEXT DATA BSS ==> [0000100000 - 0000b43df8]
[ 0.000000] #4 [0000b44000 - 0000b48000] INIT_PG_TABLE ==> [0000b44000 - 0000b48000]
[ 0.000000] #5 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00f8530] 000f8530
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x00037e70
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00037e70
[ 0.000000] On node 0 totalpages: 228877
[ 0.000000] free_area_init_node: node 0, pgdat c06bfa40, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3965 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 13 pages used for memmap
[ 0.000000] HighMem zone: 1637 pages, LIFO batch:0
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
[ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Allocating 32768 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227088
[ 0.000000] Kernel command line: root=/dev/sda7 resume=/dev/sda5 vga=773 snd-hda-intel.position_fix=1
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1795.414 MHz processor.
[ 0.003333] Console: colour dummy device 80x25
[ 0.003333] console [tty0] enabled
[ 0.003333] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.003333] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.003333] ... MAX_LOCK_DEPTH: 48
[ 0.003333] ... MAX_LOCKDEP_KEYS: 8191
[ 0.003333] ... CLASSHASH_SIZE: 4096
[ 0.003333] ... MAX_LOCKDEP_ENTRIES: 8192
[ 0.003333] ... MAX_LOCKDEP_CHAINS: 16384
[ 0.003333] ... CHAINHASH_SIZE: 8192
[ 0.003333] memory used by lock dependency info: 2335 kB
[ 0.003333] per task-struct memory footprint: 1152 bytes
[ 0.003333] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.003333] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.003333] Memory: 896760k/915904k available (4142k kernel code, 18624k reserved, 1840k data, 360k init, 6600k highmem)
[ 0.003333] virtual kernel memory layout:
[ 0.003333] fixmap : 0xfff9f000 - 0xfffff000 ( 384 kB)
[ 0.003333] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.003333] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.003333] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.003333] .init : 0xc06de000 - 0xc0738000 ( 360 kB)
[ 0.003333] .data : 0xc050b831 - 0xc06d7978 (1840 kB)
[ 0.003333] .text : 0xc0100000 - 0xc050b831 (4142 kB)
[ 0.003333] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.003333] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.003333] hpet clockevent registered
[ 0.003333] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.003350] Calibrating delay loop (skipped), value calculated using timer frequency.. 3592.44 BogoMIPS (lpj=5984713)
[ 0.003406] Mount-cache hash table entries: 512
[ 0.004097] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004108] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004115] CPU: Physical Processor ID: 0
[ 0.004121] CPU: Processor Core ID: 0
[ 0.004129] Intel machine check architecture supported.
[ 0.004136] Intel machine check reporting enabled on CPU#0.
[ 0.004144] using C1E aware idle routine
[ 0.004157] Checking 'hlt' instruction... OK.
[ 0.017274] ACPI: Core revision 20081204
[ 0.027186] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.029999] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.029999] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.029999] ..... (found apic 0 pin 0) ...
[ 0.064443] ....... works.
[ 0.064448] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-56 stepping 02
[ 0.066666] lockdep: fixing up alternatives.
[ 0.066666] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.003333] Initializing CPU#1
[ 0.003333] Calibrating delay using timer specific routine.. 3592.64 BogoMIPS (lpj=5985026)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003333] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 1
[ 0.003333] Intel machine check architecture supported.
[ 0.003333] Intel machine check reporting enabled on CPU#1.
[ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.157162] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-56 stepping 02
[ 0.157296] Brought up 2 CPUs
[ 0.157303] Total of 2 processors activated (7184.08 BogoMIPS).
[ 0.157294] System has AMD C1E enabled
[ 0.157294] Switch to broadcast mode on CPU1
[ 0.157465] Switch to broadcast mode on CPU0
[ 0.157465] net_namespace: 652 bytes
[ 0.157465] NET: Registered protocol family 16
[ 0.157795] ACPI: bus type pci registered
[ 0.157946] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 9
[ 0.157956] PCI: MCFG area at e0000000 reserved in E820
[ 0.157964] PCI: Using MMCONFIG for extended config space
[ 0.157971] PCI: Using configuration type 1 for base access
[ 0.160783] bio: create slab <bio-0> at 0
[ 0.162172] ACPI: EC: Look up EC in DSDT
[ 0.169823] ACPI: BIOS _OSI(Linux) query ignored
[ 0.170048] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.176829] ACPI: Interpreter enabled
[ 0.176838] ACPI: (supports S0 S3 S4 S5)
[ 0.176893] ACPI: Using IOAPIC for interrupt routing
[ 0.190373] ACPI: EC: GPE = 0x14, I/O: command/status = 0x66, data = 0x62
[ 0.190383] ACPI: EC: driver started in interrupt mode
[ 0.190673] ACPI: No dock devices found.
[ 0.190806] ACPI Error (exresop-0104): Needed type [Reference], found [Device] f700df90 [20081204]
[ 0.190824] ACPI Exception (dswexec-0446): AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] [20081204]
[ 0.190843] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7015dc8), AE_AML_OPERAND_TYPE
[ 0.190904] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.191175] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.191186] pci 0000:00:05.0: PME# disabled
[ 0.191248] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.191257] pci 0000:00:06.0: PME# disabled
[ 0.191346] pci 0000:00:12.0: reg 10 io port: [0x8438-0x843f]
[ 0.191357] pci 0000:00:12.0: reg 14 io port: [0x8454-0x8457]
[ 0.191367] pci 0000:00:12.0: reg 18 io port: [0x8430-0x8437]
[ 0.191377] pci 0000:00:12.0: reg 1c io port: [0x8450-0x8453]
[ 0.191387] pci 0000:00:12.0: reg 20 io port: [0x8400-0x840f]
[ 0.191397] pci 0000:00:12.0: reg 24 32bit mmio: [0xc0004000-0xc00043ff]
[ 0.191424] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.191496] pci 0000:00:13.0: reg 10 32bit mmio: [0xc0005000-0xc0005fff]
[ 0.191578] pci 0000:00:13.1: reg 10 32bit mmio: [0xc0006000-0xc0006fff]
[ 0.191660] pci 0000:00:13.2: reg 10 32bit mmio: [0xc0007000-0xc0007fff]
[ 0.191742] pci 0000:00:13.3: reg 10 32bit mmio: [0xc0008000-0xc0008fff]
[ 0.191823] pci 0000:00:13.4: reg 10 32bit mmio: [0xc0009000-0xc0009fff]
[ 0.191933] pci 0000:00:13.5: reg 10 32bit mmio: [0xc0004400-0xc00044ff]
[ 0.192012] pci 0000:00:13.5: supports D1 D2
[ 0.192015] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.192026] pci 0000:00:13.5: PME# disabled
[ 0.192093] pci 0000:00:14.0: reg 10 io port: [0x8410-0x841f]
[ 0.192103] pci 0000:00:14.0: reg 14 32bit mmio: [0xfed00000-0xfed003ff]
[ 0.192214] pci 0000:00:14.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.192225] pci 0000:00:14.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.192235] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.192245] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.192255] pci 0000:00:14.1: reg 20 io port: [0x8420-0x842f]
[ 0.192366] pci 0000:00:14.2: reg 10 64bit mmio: [0xc0000000-0xc0003fff]
[ 0.192439] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.192450] pci 0000:00:14.2: PME# disabled
[ 0.192792] pci 0000:01:05.0: reg 10 32bit mmio: [0xc8000000-0xcfffffff]
[ 0.192798] pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff]
[ 0.192805] pci 0000:01:05.0: reg 18 32bit mmio: [0xc0100000-0xc010ffff]
[ 0.192821] pci 0000:01:05.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.192836] pci 0000:01:05.0: supports D1 D2
[ 0.192867] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
[ 0.192871] pci 0000:00:01.0: bridge 32bit mmio: [0xc0100000-0xc01fffff]
[ 0.192878] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc8000000-0xcfffffff]
[ 0.192933] pci 0000:00:05.0: bridge io port: [0x00-0xfff]
[ 0.192933] pci 0000:00:05.0: bridge 32bit mmio: [0x000000-0x0fffff]
[ 0.192933] pci 0000:05:00.0: reg 10 32bit mmio: [0xc0200000-0xc0203fff]
[ 0.192933] pci 0000:05:00.0: supports D1 D2
[ 0.192933] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.192933] pci 0000:00:06.0: bridge 32bit mmio: [0xc0200000-0xc02fffff]
[ 0.192933] pci 0000:08:00.0: reg 10 32bit mmio: [0xc0300000-0xc0301fff]
[ 0.192933] pci 0000:08:00.0: supports D1 D2
[ 0.192933] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.192933] pci 0000:08:00.0: PME# disabled
[ 0.192933] pci 0000:08:01.0: reg 10 32bit mmio: [0xc0302000-0xc03020ff]
[ 0.192933] pci 0000:08:01.0: supports D1 D2
[ 0.192933] pci 0000:08:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.192933] pci 0000:08:01.0: PME# disabled
[ 0.192933] pci 0000:08:01.1: reg 10 32bit mmio: [0xc0302400-0xc03024ff]
[ 0.192933] pci 0000:08:01.1: supports D1 D2
[ 0.192933] pci 0000:08:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.192933] pci 0000:08:01.1: PME# disabled
[ 0.192933] pci 0000:00:14.4: transparent bridge
[ 0.192933] pci 0000:00:14.4: bridge 32bit mmio: [0xc0300000-0xc03fffff]
[ 0.192933] pci_bus 0000:00: on NUMA node 0
[ 0.192933] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.192933] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.192933] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 0.192933] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.192933] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.192933] ACPI Error (exresop-0104): Needed type [Reference], found [Device] f700df90 [20081204]
[ 0.192933] ACPI Exception (dswexec-0446): AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] [20081204]
[ 0.192933] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7015dc8), AE_AML_OPERAND_TYPE
[ 0.198963] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 0.199141] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 0.199315] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 0.199489] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 0.199663] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.199838] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 0.200019] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.200194] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.200370] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
[ 0.200862] SCSI subsystem initialized
[ 0.203356] libata version 3.00 loaded.
[ 0.203389] usbcore: registered new interface driver usbfs
[ 0.203428] usbcore: registered new interface driver hub
[ 0.203441] usbcore: registered new device driver usb
[ 0.203470] ACPI: WMI: Mapper loaded
[ 0.203476] PCI: Using ACPI for IRQ routing
[ 0.203487] pci 0000:00:05.0: BAR 7: can't allocate resource
[ 0.203494] pci 0000:00:05.0: BAR 8: can't allocate resource
[ 0.253482] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.253497] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.254568] cfg80211: Calling CRDA to update world regulatory domain
[ 0.270036] Switched to high resolution mode on CPU 0
[ 0.270044] Switched to high resolution mode on CPU 1
[ 0.274202] pnp: PnP ACPI init
[ 0.274235] ACPI: bus type pnp registered
[ 0.277819] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling
[ 0.279190] pnp: PnP ACPI: found 11 devices
[ 0.279198] ACPI: ACPI bus type pnp unregistered
[ 0.279219] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.279229] system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.279239] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.279259] system 00:08: ioport range 0x1080-0x1080 has been reserved
[ 0.279269] system 00:08: ioport range 0x220-0x22f has been reserved
[ 0.279278] system 00:08: ioport range 0x40b-0x40b has been reserved
[ 0.279287] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.279296] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[ 0.279305] system 00:08: ioport range 0x530-0x537 has been reserved
[ 0.279314] system 00:08: ioport range 0xc00-0xc01 has been reserved
[ 0.279323] system 00:08: ioport range 0xc14-0xc14 has been reserved
[ 0.279332] system 00:08: ioport range 0xc50-0xc52 has been reserved
[ 0.279341] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[ 0.279350] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[ 0.279359] system 00:08: ioport range 0xcd0-0xcd3 has been reserved
[ 0.279368] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[ 0.279377] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[ 0.279386] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[ 0.279396] system 00:08: ioport range 0x8000-0x805f has been reserved
[ 0.279405] system 00:08: ioport range 0xf40-0xf47 has been reserved
[ 0.279414] system 00:08: ioport range 0x87f-0x87f has been reserved
[ 0.279431] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[ 0.279441] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.279452] system 00:09: iomem range 0xc0004800-0xc0004bff has been reserved
[ 0.279462] system 00:09: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.314481] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.314500] b43-pci-bridge 0000:05:00.0: setting latency timer to 64
[ 0.363539] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0
[ 0.363629] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.363638] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.363649] pci 0000:00:01.0: MEM window: 0xc0100000-0xc01fffff
[ 0.363659] pci 0000:00:01.0: PREFETCH window: 0x000000c8000000-0x000000cfffffff
[ 0.363673] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02
[ 0.363681] pci 0000:00:05.0: IO window: disabled
[ 0.363690] pci 0000:00:05.0: MEM window: disabled
[ 0.363699] pci 0000:00:05.0: PREFETCH window: disabled
[ 0.363709] pci 0000:00:06.0: PCI bridge, secondary bus 0000:05
[ 0.363717] pci 0000:00:06.0: IO window: disabled
[ 0.363727] pci 0000:00:06.0: MEM window: 0xc0200000-0xc02fffff
[ 0.363736] pci 0000:00:06.0: PREFETCH window: disabled
[ 0.363747] pci 0000:00:14.4: PCI bridge, secondary bus 0000:08
[ 0.363755] pci 0000:00:14.4: IO window: disabled
[ 0.363767] pci 0000:00:14.4: MEM window: 0xc0300000-0xc03fffff
[ 0.363779] pci 0000:00:14.4: PREFETCH window: disabled
[ 0.363803] pci 0000:00:05.0: setting latency timer to 64
[ 0.363812] pci 0000:00:06.0: setting latency timer to 64
[ 0.363823] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.363826] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.363829] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
[ 0.363832] pci_bus 0000:01: resource 1 mem: [0xc0100000-0xc01fffff]
[ 0.363835] pci_bus 0000:01: resource 2 mem: [0xc8000000-0xcfffffff]
[ 0.363838] pci_bus 0000:01: resource 3 mem: [0x0-0x0]
[ 0.363840] pci_bus 0000:02: resource 0 mem: [0x0-0xfff]
[ 0.363843] pci_bus 0000:02: resource 1 mem: [0x0-0xfffff]
[ 0.363846] pci_bus 0000:02: resource 2 mem: [0x0-0x0]
[ 0.363848] pci_bus 0000:02: resource 3 mem: [0x0-0x0]
[ 0.363851] pci_bus 0000:05: resource 0 mem: [0x0-0x0]
[ 0.363854] pci_bus 0000:05: resource 1 mem: [0xc0200000-0xc02fffff]
[ 0.363857] pci_bus 0000:05: resource 2 mem: [0x0-0x0]
[ 0.363860] pci_bus 0000:05: resource 3 mem: [0x0-0x0]
[ 0.363862] pci_bus 0000:08: resource 0 mem: [0x0-0x0]
[ 0.363865] pci_bus 0000:08: resource 1 mem: [0xc0300000-0xc03fffff]
[ 0.363868] pci_bus 0000:08: resource 2 mem: [0x0-0x0]
[ 0.363871] pci_bus 0000:08: resource 3 io: [0x00-0xffff]
[ 0.363874] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffff]
[ 0.363935] NET: Registered protocol family 2
[ 0.391010] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.391705] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.392323] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[ 0.398215] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.398259] TCP reno registered
[ 0.407668] NET: Registered protocol family 1
[ 0.408222] Machine check exception polling timer started.
[ 0.408718] audit: initializing netlink socket (disabled)
[ 0.408755] type=2000 audit(1238234910.407:1): initialized
[ 0.412422] highmem bounce pool size: 64 pages
[ 0.412436] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.416008] DLM (built Mar 28 2009 09:49:54) installed
[ 0.416792] msgmni has been set to 1738
[ 0.417794] alg: No test for stdrng (krng)
[ 0.417901] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.417933] io scheduler noop registered
[ 0.417955] io scheduler cfq registered (default)
[ 0.417972] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.418182] pci 0000:01:05.0: Boot video device
[ 0.418400] pcieport-driver 0000:00:05.0: setting latency timer to 64
[ 0.418541] pcieport-driver 0000:00:06.0: setting latency timer to 64
[ 0.418698] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.419007] vesafb: framebuffer at 0xc8000000, mapped to 0xf8080000, using 1536k, total 16384k
[ 0.419021] vesafb: mode is 1024x768x8, linelength=1024, pages=20
[ 0.419030] vesafb: protected mode interface info at c000:51a0
[ 0.419039] vesafb: pmi: set display start = c00c5234, set palette = c00c5280
[ 0.419048] vesafb: pmi: ports = 9010 9016 9054 9038 903c 905c 9000 9004 90b0 90b2 90b4
[ 0.419073] vesafb: scrolling: redraw
[ 0.419080] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
[ 0.443249] Console: switching to colour frame buffer device 128x48
[ 0.466173] fb0: VESA VGA frame buffer device
[ 0.468785] ACPI: AC Adapter [ACAD] (on-line)
[ 0.850207] ACPI Warning (nspredef-0940): \_SB_.BAT1._BST: Return Package type mismatch at index 2 - found [NULL Object Descriptor], expected Integer [20081204]
[ 0.850901] ACPI: Battery Slot [BAT1] (battery present)
[ 0.851291] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.851674] ACPI: Power Button (FF) [PWRF]
[ 0.851940] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.852327] ACPI: Power Button (CM) [PWRB]
[ 0.852620] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.853013] ACPI: Sleep Button (CM) [SLPB]
[ 0.853280] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 0.855033] ACPI: Lid Switch [LID]
[ 0.863300] acpi device:1e: registered as cooling_device0
[ 0.863712] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1b/device:1c/input/input4
[ 0.873346] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 0.883205] ACPI: processor limited to max C-state 1
[ 0.892921] processor ACPI_CPU:00: registered as cooling_device1
[ 0.902655] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.912534] processor ACPI_CPU:01: registered as cooling_device2
[ 0.927625] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.939763] ACPI: Thermal Zone [THRM] (53 C)
[ 1.018063] Linux agpgart interface v0.103
[ 1.027909] [drm] Initialized drm 1.1.0 20060810
[ 1.038486] pci 0000:01:05.0: power state changed by ACPI to D0
[ 1.048176] pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.058183] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 1.069144] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.080616] loop: module loaded
[ 1.090633] b44 0000:08:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.150168] ssb: Sonics Silicon Backplane found on PCI device 0000:08:00.0
[ 1.160038] b44.c:v2.0
[ 1.184052] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:19:b9:4e:20:8a
[ 1.193918] Uniform Multi-Platform E-IDE driver
[ 1.203816] atiixp 0000:00:14.1: IDE controller (0x1002:0x438c rev 0x00)
[ 1.213811] ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.223841] atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
[ 1.233930] ide0: BM-DMA at 0x8420-0x8427
[ 1.243957] Probing IDE interface ide0...
[ 1.943748] hda: HL-DT-ST DVD+/-RW GSA-T11N, ATAPI CD/DVD-ROM drive
[ 2.273459] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.274289] hda: UDMA/33 mode selected
[ 2.284705] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.298237] ide-cd driver 5.00
[ 2.309606] ide-cd: hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 2.319291] Uniform CD-ROM driver Revision: 3.20
[ 2.341458] Driver 'sd' needs updating - please use bus_type methods
[ 2.351212] ahci 0000:00:12.0: version 3.0
[ 2.351231] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.360875] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 2.370480] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.379873] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio
[ 2.389574] scsi0 : ahci
[ 2.398854] scsi1 : ahci
[ 2.407658] scsi2 : ahci
[ 2.416242] scsi3 : ahci
[ 2.424695] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 22
[ 2.433166] ata2: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004180 irq 22
[ 2.441359] ata3: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004200 irq 22
[ 2.449466] ata4: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004280 irq 22
[ 3.176730] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.652221] ata1.00: ATA-7: TOSHIBA MK1234GSX, AH001D, max UDMA/100
[ 3.660108] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.668019] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.677162] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.684879] ata1.00: configured for UDMA/100
[ 3.693028] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1234GS AH00 PQ: 0 ANSI: 5
[ 3.701498] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[ 3.709551] sd 0:0:0:0: [sda] Write Protect is off
[ 3.717385] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.717431] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.725953] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[ 3.733994] sd 0:0:0:0: [sda] Write Protect is off
[ 3.741887] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.741932] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.750003] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
[ 3.845674] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.854093] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.183391] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.510057] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.836723] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.844397] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.851901] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 4.859376] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 4.867520] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 4.875065] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 4.882619] ehci_hcd 0000:00:13.5: debug port 1
[ 4.889983] ehci_hcd 0000:00:13.5: irq 19, io mem 0xc0004400
[ 4.906709] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 4.913995] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.921203] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.928471] usb usb1: Product: EHCI Host Controller
[ 4.935625] usb usb1: Manufacturer: Linux 2.6.29-g14-rfkill-nophy-ledon-03652-g5d80f8e ehci_hcd
[ 4.942989] usb usb1: SerialNumber: 0000:00:13.5
[ 4.950451] usb usb1: configuration #1 chosen from 1 choice
[ 4.958063] hub 1-0:1.0: USB hub found
[ 4.965676] hub 1-0:1.0: 10 ports detected
[ 4.973871] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.981494] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.989222] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 4.997036] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 5.005037] ohci_hcd 0000:00:13.0: irq 16, io mem 0xc0005000
[ 5.063519] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.071431] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.079340] usb usb2: Product: OHCI Host Controller
[ 5.087168] usb usb2: Manufacturer: Linux 2.6.29-g14-rfkill-nophy-ledon-03652-g5d80f8e ohci_hcd
[ 5.095492] usb usb2: SerialNumber: 0000:00:13.0
[ 5.103735] usb usb2: configuration #1 chosen from 1 choice
[ 5.111886] hub 2-0:1.0: USB hub found
[ 5.119833] hub 2-0:1.0: 2 ports detected
[ 5.127794] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.135802] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 5.143727] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 5.151601] ohci_hcd 0000:00:13.1: irq 17, io mem 0xc0006000
[ 5.210090] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.217787] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.225518] usb usb3: Product: OHCI Host Controller
[ 5.233221] usb usb3: Manufacturer: Linux 2.6.29-g14-rfkill-nophy-ledon-03652-g5d80f8e ohci_hcd
[ 5.241135] usb usb3: SerialNumber: 0000:00:13.1
[ 5.249306] usb usb3: configuration #1 chosen from 1 choice
[ 5.257533] hub 3-0:1.0: USB hub found
[ 5.265638] hub 3-0:1.0: 2 ports detected
[ 5.273765] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.281886] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 5.290040] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 5.298170] ohci_hcd 0000:00:13.2: irq 18, io mem 0xc0007000
[ 5.357585] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.365851] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.374108] usb usb4: Product: OHCI Host Controller
[ 5.382239] usb usb4: Manufacturer: Linux 2.6.29-g14-rfkill-nophy-ledon-03652-g5d80f8e ohci_hcd
[ 5.390656] usb usb4: SerialNumber: 0000:00:13.2
[ 5.399052] usb usb4: configuration #1 chosen from 1 choice
[ 5.407307] hub 4-0:1.0: USB hub found
[ 5.415333] hub 4-0:1.0: 2 ports detected
[ 5.423502] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.431684] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 5.439969] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 5.448145] ohci_hcd 0000:00:13.3: irq 17, io mem 0xc0008000
[ 5.506765] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.514953] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.523210] usb usb5: Product: OHCI Host Controller
[ 5.531349] usb usb5: Manufacturer: Linux 2.6.29-g14-rfkill-nophy-ledon-03652-g5d80f8e ohci_hcd
[ 5.539767] usb usb5: SerialNumber: 0000:00:13.3
[ 5.548136] usb usb5: configuration #1 chosen from 1 choice
[ 5.556502] hub 5-0:1.0: USB hub found
[ 5.564565] hub 5-0:1.0: 2 ports detected
[ 5.572735] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.580849] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 5.589030] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 5.597287] ohci_hcd 0000:00:13.4: irq 18, io mem 0xc0009000
[ 5.656760] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.664940] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.673193] usb usb6: Product: OHCI Host Controller
[ 5.681326] usb usb6: Manufacturer: Linux 2.6.29-g14-rfkill-nophy-ledon-03652-g5d80f8e ohci_hcd
[ 5.689737] usb usb6: SerialNumber: 0000:00:13.4
[ 5.698105] usb usb6: configuration #1 chosen from 1 choice
[ 5.706459] hub 6-0:1.0: USB hub found
[ 5.714515] hub 6-0:1.0: 2 ports detected
[ 5.722708] Initializing USB Mass Storage driver...
[ 5.730685] usbcore: registered new interface driver usb-storage
[ 5.738700] USB Mass Storage support registered.
[ 5.746946] usbcore: registered new interface driver libusual
[ 5.755122] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 5.766713] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.774984] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.783326] mice: PS/2 mouse device common for all mice
[ 5.841235] rtc_cmos 00:04: RTC can wake from S4
[ 5.849563] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 5.857636] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 5.865653] i2c /dev entries driver
[ 5.873526] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0
[ 5.878750] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 5.890218] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 5.898892] device-mapper: uevent: version 1.0.3
[ 5.907441] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 5.916030] EDAC MC: Ver: 2.1.0 Mar 28 2009
[ 5.924807] cpuidle: using governor ladder
[ 5.933332] cpuidle: using governor menu
[ 5.941670] sdhci: Secure Digital Host Controller Interface driver
[ 5.950119] sdhci: Copyright(c) Pierre Ossman
[ 5.958483] sdhci-pci 0000:08:01.0: SDHCI controller found [1180:0822] (rev 19)
[ 5.966906] sdhci-pci 0000:08:01.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 5.977458] Registered led device: mmc0::
[ 5.986808] mmc0: SDHCI controller on PCI [0000:08:01.0] using PIO
[ 5.995235] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 6.003994] usbcore: registered new interface driver hiddev
[ 6.012604] usbcore: registered new interface driver usbhid
[ 6.021125] usbhid: v2.6:USB HID core driver
[ 6.034495] Advanced Linux Sound Architecture Driver Version 1.0.19.
[ 6.044477] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.130494] input: HDA ATI SB Mic at Ext Right Jack as /devices/pci0000:00/0000:00:14.2/input/input6
[ 6.146849] input: HDA ATI SB HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:14.2/input/input7
[ 6.164276] ALSA device list:
[ 6.172990] #0: HDA ATI SB at 0xc0000000 irq 16
[ 6.181609] oprofile: using NMI interrupt.
[ 6.191059] TCP cubic registered
[ 6.199600] Initializing XFRM netlink socket
[ 6.208211] NET: Registered protocol family 17
[ 6.216871] NET: Registered protocol family 15
[ 6.231441] SCTP: Hash tables configured (established 32768 bind 32768)
[ 6.260104] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-56 processors (2 cpu cores) (version 2.20.00)
[ 6.269259] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x13
[ 6.278000] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x15
[ 6.286581] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x1e
[ 6.295552] Using IPI No-Shortcut mode
[ 6.638678] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04713/0x200000
[ 6.683864] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 6.745817] rtc_cmos 00:04: setting system clock to 2009-03-28 10:08:38 UTC (1238234918)
[ 6.783497] kjournald starting. Commit interval 5 seconds
[ 6.783699] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.783767] VFS: Mounted root (ext3 filesystem) readonly on device 8:7.
[ 6.784138] Freeing unused kernel memory: 360k freed
[ 6.820684] Write protecting the kernel text: 4144k
[ 6.829851] Write protecting the kernel read-only data: 1512k
[ 7.500054] Clocksource tsc unstable (delta = -154324383 ns)
[ 9.406004] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.544419] b43-phy0: Broadcom 4311 WLAN found (core revision 10)
[ 9.577853] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 9.588733] ricoh-mmc: Copyright(c) Philip Langdale
[ 9.599586] ricoh-mmc: Ricoh MMC controller found at 0000:08:01.1 [1180:0843] (rev 1)
[ 9.610495] ricoh-mmc: Main Ricoh function not found. Cannot disable controller.
[ 9.645072] phy0: Selected rate control algorithm 'pid'
[ 9.679017] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
[ 10.453259] Adding 1574328k swap on /dev/sda5. Priority:-1 extents:1 across:1574328k
[ 10.549065] fuse init (API version 7.11)
[ 11.621948] EXT3 FS on sda7, internal journal
[ 15.176025] kjournald starting. Commit interval 5 seconds
[ 15.176645] EXT3 FS on sda8, internal journal
[ 15.176668] EXT3-fs: mounted filesystem with ordered data mode.
[ 46.823258] [drm] Setting GART location based on new memory map
[ 46.824392] [drm] Loading R300 Microcode
[ 46.824420] [drm] Num pipes: 3
[ 46.824432] [drm] writeback test succeeded in 1 usecs
[ 50.366972] input: b43-phy0 as /devices/virtual/input/input9
[ 50.437638] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 50.662657] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[ 50.760936] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[ 50.845013] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[ 51.140905] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 51.222701] Registered led device: b43-phy0::tx
[ 51.222804] Registered led device: b43-phy0::rx
[ 51.222929] Registered led device: b43-phy0::radio
[ 51.250902] b43-phy0: Radio turned on by software
[ 51.373659] b43-phy0: Radio hardware status changed to DISABLED
[ 51.437204] b43-phy0: Radio turned on by software
[ 51.437217] b43-phy0: The hardware RF-kill button still turns the radio physically off. Press the button to turn it on.
[ 58.337105] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 58.337115] b44: eth0: Flow control is off for TX and off for RX.
[ 68.216934] b44: eth0: powering down PHY
[ 71.346899] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 71.346909] b44: eth0: Flow control is off for TX and off for RX.
[ 133.276235]
[ 133.276243] =========================================================
[ 133.276253] [ INFO: possible irq lock inversion dependency detected ]
[ 133.276262] 2.6.29-g14-rfkill-nophy-ledon-03652-g5d80f8e #87
[ 133.276268] ---------------------------------------------------------
[ 133.276274] swapper/0 just changed the state of lock:
[ 133.276281] (fasync_lock){..+.}, at: [<c01b7107>] kill_fasync+0x27/0x50
[ 133.276303] but this lock took another, hard-irq-unsafe lock in the past:
[ 133.276310] (&f->f_lock){--..}
[ 133.276316]
[ 133.276317] and interrupts could create inverse lock ordering between them.
[ 133.276321]
[ 133.276326]
[ 133.276327] other info that might help us debug this:
[ 133.276334] 4 locks held by swapper/0:
[ 133.276338] #0: (&serio->lock){++..}, at: [<c039c281>] serio_interrupt+0x21/0x80
[ 133.276358] #1: (&dev->event_lock){++..}, at: [<c03a0ac0>] input_event+0x40/0x70
[ 133.276373] #2: (rcu_read_lock){..--}, at: [<c039f220>] input_pass_event+0x0/0xf0
[ 133.276390] #3: (rcu_read_lock){..--}, at: [<c03a3be0>] evdev_event+0x0/0x110
[ 133.276407]
[ 133.276408] the first lock's dependencies:
[ 133.276413] -> (fasync_lock){..+.} ops: 0 {
[ 133.276425] initial-use at:
[ 133.276432] [<c0153761>] __lock_acquire+0x151/0x1920
[ 133.276448] [<c0154f8e>] lock_acquire+0x5e/0x80
[ 133.276459] [<c0506293>] _write_lock_irq+0x43/0x50
[ 133.276472] [<c01b6b84>] fasync_helper+0x24/0x140
[ 133.276483] [<c02d5775>] tty_fasync+0x65/0x120
[ 133.276494] [<c02d7e66>] tty_release_dev+0x66/0x4f0
[ 133.276505] [<c02d8302>] tty_release+0x12/0x20
[ 133.276514] [<c01abe32>] __fput+0xc2/0x1b0
[ 133.276526] [<c01abf3f>] fput+0x1f/0x30
[ 133.276536] [<c01a8e17>] filp_close+0x47/0x70
[ 133.276548] [<c01a8eb0>] sys_close+0x70/0xd0
[ 133.276558] [<c010351a>] syscall_call+0x7/0xb
[ 133.276570] [<ffffffff>] 0xffffffff
[ 133.276582] in-hardirq-R at:
[ 133.276587] [<c0153d0c>] __lock_acquire+0x6fc/0x1920
[ 133.276598] [<c0154f8e>] lock_acquire+0x5e/0x80
[ 133.276608] [<c050643d>] _read_lock+0x3d/0x50
[ 133.276618] [<c01b7107>] kill_fasync+0x27/0x50
[ 133.276629] [<c03a38ef>] evdev_pass_event+0x6f/0x80
[ 133.276638] [<c03a3c52>] evdev_event+0x72/0x110
[ 133.276648] [<c039f284>] input_pass_event+0x64/0xf0
[ 133.276659] [<c039f70d>] input_handle_event+0x7d/0x420
[ 133.276670] [<c03a0ae0>] input_event+0x60/0x70
[ 133.276679] [<c03a87a6>] synaptics_process_byte+0x476/0x860
[ 133.276692] [<c03a6a7f>] psmouse_handle_byte+0xf/0x110
[ 133.276703] [<c03a7874>] psmouse_interrupt+0xc4/0x2b0
[ 133.276714] [<c039c29b>] serio_interrupt+0x3b/0x80
[ 133.276724] [<c039d2e3>] i8042_interrupt+0xb3/0x250
[ 133.276735] [<c016f6d9>] handle_IRQ_event+0x39/0xa0
[ 133.276746] [<c0170ded>] handle_edge_irq+0xad/0x140
[ 133.276756] [<c0104f9b>] do_IRQ+0x4b/0x90
[ 133.276767] [<c0103aac>] common_interrupt+0x2c/0x34
[ 133.276777] [<c010966b>] c1e_idle+0x9b/0x100
[ 133.276788] [<c0102370>] cpu_idle+0x70/0xb0
[ 133.276798] [<c04f2547>] rest_init+0x67/0x70
[ 133.276809] [<ffffffff>] 0xffffffff
[ 133.276817] }
[ 133.276821] ... key at: [<c068f6c4>] fasync_lock+0x10/0x1c
[ 133.276834] -> (&f->f_lock){--..} ops: 0 {
[ 133.276845] initial-use at:
[ 133.276851] [<c0153761>] __lock_acquire+0x151/0x1920
[ 133.276862] [<c0154f8e>] lock_acquire+0x5e/0x80
[ 133.276872] [<c050609d>] _spin_lock+0x3d/0x50
[ 133.276883] [<c01b6bc8>] fasync_helper+0x68/0x140
[ 133.276893] [<c02d5775>] tty_fasync+0x65/0x120
[ 133.276902] [<c02d7e66>] tty_release_dev+0x66/0x4f0
[ 133.276912] [<c02d8302>] tty_release+0x12/0x20
[ 133.276921] [<c01abe32>] __fput+0xc2/0x1b0
[ 133.276931] [<c01abf3f>] fput+0x1f/0x30
[ 133.276941] [<c01a8e17>] filp_close+0x47/0x70
[ 133.276951] [<c01a8eb0>] sys_close+0x70/0xd0
[ 133.276961] [<c010351a>] syscall_call+0x7/0xb
[ 133.276970] [<ffffffff>] 0xffffffff
[ 133.276979] softirq-on-W at:
[ 133.276984] [<c0153bed>] __lock_acquire+0x5dd/0x1920
[ 133.276995] [<c0154f8e>] lock_acquire+0x5e/0x80
[ 133.277006] [<c050609d>] _spin_lock+0x3d/0x50
[ 133.277016] [<c01b7649>] do_fcntl+0x329/0x3f0
[ 133.277027] [<c01b7752>] sys_fcntl64+0x42/0x90
[ 133.277037] [<c010351a>] syscall_call+0x7/0xb
[ 133.277046] [<ffffffff>] 0xffffffff
[ 133.277054] hardirq-on-W at:
[ 133.277059] [<c0153bc7>] __lock_acquire+0x5b7/0x1920
[ 133.277069] [<c0154f8e>] lock_acquire+0x5e/0x80
[ 133.277079] [<c050609d>] _spin_lock+0x3d/0x50
[ 133.277089] [<c01b7649>] do_fcntl+0x329/0x3f0
[ 133.277099] [<c01b7752>] sys_fcntl64+0x42/0x90
[ 133.277109] [<c010351a>] syscall_call+0x7/0xb
[ 133.277118] [<ffffffff>] 0xffffffff
[ 133.277127] }
[ 133.277130] ... key at: [<c0b2c388>] __key.20023+0x0/0x8
[ 133.277140] ... acquired at:
[ 133.277144] [<c01545ab>] __lock_acquire+0xf9b/0x1920
[ 133.277154] [<c0154f8e>] lock_acquire+0x5e/0x80
[ 133.277162] [<c050609d>] _spin_lock+0x3d/0x50
[ 133.277171] [<c01b6bc8>] fasync_helper+0x68/0x140
[ 133.277180] [<c02d5775>] tty_fasync+0x65/0x120
[ 133.277188] [<c02d7e66>] tty_release_dev+0x66/0x4f0
[ 133.277196] [<c02d8302>] tty_release+0x12/0x20
[ 133.277203] [<c01abe32>] __fput+0xc2/0x1b0
[ 133.277212] [<c01abf3f>] fput+0x1f/0x30
[ 133.277220] [<c01a8e17>] filp_close+0x47/0x70
[ 133.277228] [<c01a8eb0>] sys_close+0x70/0xd0
[ 133.277237] [<c010351a>] syscall_call+0x7/0xb
[ 133.277245] [<ffffffff>] 0xffffffff
[ 133.277252]
[ 133.277255]
[ 133.277256] the second lock's dependencies:
[ 133.277261] -> (&f->f_lock){--..} ops: 0 {
[ 133.277272] initial-use at:
[ 133.277277] [<c0153761>] __lock_acquire+0x151/0x1920
[ 133.277287] [<c0154f8e>] lock_acquire+0x5e/0x80
[ 133.277297] [<c050609d>] _spin_lock+0x3d/0x50
[ 133.277307] [<c01b6bc8>] fasync_helper+0x68/0x140
[ 133.277317] [<c02d5775>] tty_fasync+0x65/0x120
[ 133.277326] [<c02d7e66>] tty_release_dev+0x66/0x4f0
[ 133.277336] [<c02d8302>] tty_release+0x12/0x20
[ 133.277345] [<c01abe32>] __fput+0xc2/0x1b0
[ 133.277355] [<c01abf3f>] fput+0x1f/0x30
[ 133.277365] [<c01a8e17>] filp_close+0x47/0x70
[ 133.277375] [<c01a8eb0>] sys_close+0x70/0xd0
[ 133.277384] [<c010351a>] syscall_call+0x7/0xb
[ 133.277394] [<ffffffff>] 0xffffffff
[ 133.277402] softirq-on-W at:
[ 133.277408] [<c0153bed>] __lock_acquire+0x5dd/0x1920
[ 133.277418] [<c0154f8e>] lock_acquire+0x5e/0x80
[ 133.277429] [<c050609d>] _spin_lock+0x3d/0x50
[ 133.277439] [<c01b7649>] do_fcntl+0x329/0x3f0
[ 133.277449] [<c01b7752>] sys_fcntl64+0x42/0x90
[ 133.277459] [<c010351a>] syscall_call+0x7/0xb
[ 133.277468] [<ffffffff>] 0xffffffff
[ 133.277476] hardirq-on-W at:
[ 133.277482] [<c0153bc7>] __lock_acquire+0x5b7/0x1920
[ 133.277492] [<c0154f8e>] lock_acquire+0x5e/0x80
[ 133.277504] [<c050609d>] _spin_lock+0x3d/0x50
[ 133.277514] [<c01b7649>] do_fcntl+0x329/0x3f0
[ 133.277524] [<c01b7752>] sys_fcntl64+0x42/0x90
[ 133.277534] [<c010351a>] syscall_call+0x7/0xb
[ 133.277544] [<ffffffff>] 0xffffffff
[ 133.277552] }
[ 133.277556] ... key at: [<c0b2c388>] __key.20023+0x0/0x8
[ 133.277564]
[ 133.277565] stack backtrace:
[ 133.277573] Pid: 0, comm: swapper Not tainted 2.6.29-g14-rfkill-nophy-ledon-03652-g5d80f8e #87
[ 133.277580] Call Trace:
[ 133.277588] [<c0502887>] ? printk+0x18/0x1a
[ 133.277598] [<c0151b6d>] print_irq_inversion_bug+0x11d/0x190
[ 133.277607] [<c0151c47>] check_usage_forwards+0x67/0xb0
[ 133.277616] [<c0150f9a>] ? save_trace+0x3a/0xa0
[ 133.277624] [<c015223d>] mark_lock+0x4fd/0xc30
[ 133.277633] [<c0153d0c>] __lock_acquire+0x6fc/0x1920
[ 133.277643] [<c0154f8e>] lock_acquire+0x5e/0x80
[ 133.277651] [<c01b7107>] ? kill_fasync+0x27/0x50
[ 133.277660] [<c050643d>] _read_lock+0x3d/0x50
[ 133.277669] [<c01b7107>] ? kill_fasync+0x27/0x50
[ 133.277677] [<c01b7107>] kill_fasync+0x27/0x50
[ 133.277685] [<c03a38ef>] evdev_pass_event+0x6f/0x80
[ 133.277693] [<c03a3c52>] evdev_event+0x72/0x110
[ 133.277700] [<c03a3be0>] ? evdev_event+0x0/0x110
[ 133.277710] [<c039f284>] input_pass_event+0x64/0xf0
[ 133.277719] [<c039f220>] ? input_pass_event+0x0/0xf0
[ 133.277729] [<c039f70d>] input_handle_event+0x7d/0x420
[ 133.277736] [<c03a0ae0>] input_event+0x60/0x70
[ 133.277745] [<c03a87a6>] synaptics_process_byte+0x476/0x860
[ 133.277755] [<c03a6a7f>] psmouse_handle_byte+0xf/0x110
[ 133.277764] [<c03a7874>] psmouse_interrupt+0xc4/0x2b0
[ 133.277773] [<c050619d>] ? _spin_lock_irqsave+0x4d/0x60
[ 133.277782] [<c039c29b>] serio_interrupt+0x3b/0x80
[ 133.277791] [<c039d2e3>] i8042_interrupt+0xb3/0x250
[ 133.277799] [<c016f6d9>] handle_IRQ_event+0x39/0xa0
[ 133.277808] [<c0170ded>] handle_edge_irq+0xad/0x140
[ 133.277816] [<c0104f9b>] do_IRQ+0x4b/0x90
[ 133.277824] [<c0103aac>] common_interrupt+0x2c/0x34
[ 133.277833] [<c01094b7>] ? default_idle+0x57/0x60
[ 133.277842] [<c010966b>] c1e_idle+0x9b/0x100
[ 133.277850] [<c0102370>] cpu_idle+0x70/0xb0
[ 133.277857] [<c04f2547>] rest_init+0x67/0x70
[ 627.590017] CE: hpet increasing min_delta_ns to 15000 nsec
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2009-03-28 2:32 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <a0adeea50903271928u714dc8b4j5fcb6826432c5089@mail.gmail.com>
2009-03-28 2:32 ` "INFO: possible irq lock inversion dependency detected" in 2.6.29-git2 Grissiom
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®