Re: [Linux-stm32] [PATCH v3 2/3] dt-bindings: arm: stm32: allow TAMP nvram child node for syscon

[Patrice CHOTARD <patrice.chotard@foss.st.com>]

On 11/5/26 11:31, Patrice CHOTARD wrote:
> 
> 
> On 11/5/26 09:17, Krzysztof Kozlowski wrote:
>> On 04/11/2026 14:43, Patrice CHOTARD wrote:
>>>
>>>
>>> On 10/17/26 19:52, Krzysztof Kozlowski wrote:
>>>> On Fri, Oct 16, 2026 at 05:26:04PM +0200, Patrice Chotard wrote:
>>>>> The STM32 TAMP node (compatible "st,stm32-tamp", "syscon", "simple-mfd")
>>>>> exposes its backup registers through an nvram child node described by
>>>>> nvmem/st,stm32-tamp-nvram.yaml. That requires the TAMP node to carry
>>>>> "#address-cells", "#size-cells", "ranges" and an "nvram@..." child.
>>>>>
>>>>> st,stm32-syscon.yaml uses "additionalProperties: false" and only allowed
>>>>> reg/clocks/#clock-cells, so wiring the nvram provider into the DTSI made
>>>>> "make dtbs_check" fail on every STM32MP TAMP node:
>>>>>
>>>>>   tamp@5c00a000 (st,stm32-tamp): '#address-cells', '#size-cells',
>>>>>   'nvram@5c00a100', 'ranges' do not match any of the regexes:
>>>>>   '^pinctrl-[0-9]+$'
>>>>
>>>> There are no children of tamp@5c00a000 in
>>>> arch/arm/boot/dts/st/stm32mp151.dtsi. How is it possible to reproduce
>>>> this warning?
>>>>
>>>> Are you using some other patches bugs as a reason of change in bindings?
>>>
>>> Hi Krzysztof
>>>
>>> yes, in this patch [1] arch/arm/boot/dts/st/stm32mp151.dtsi is updated
>>> that's why bindings need this change.
>>
>> You cannot use future code as a bug being fixed.
> 
> Ok, so i will merge this series with https://patchwork.kernel.org/series/1176665/

Don't take care of v4 i submitted yesterday.

Patrice> 
> Thanks
> Patrice
> 
>>
>>
>> Best regards,
>> Krzysztof
> 
> _______________________________________________
> Linux-stm32 mailing list
> Linux-stm32@st-md-mailman.stormreply.com
> https://st-md-mailman.stormreply.com/mailman/listinfo/linux-stm32