[PATCH v2] drm/bridge: it6505: Power on downstream device in .atomic_enable

[PATCH v2] drm/bridge: it6505: Power on downstream device in .atomic_enable

[Pin-Yen Lin]

Send DPCD DP_SET_POWER_D0 command to the monitor in .atomic_enable
callback. Without this command, some monitors won't show up again after
changing the resolution.

Fixes: 46ca7da7f1e8 ("drm/bridge: it6505: Send DPCD SET_POWER to downstream")

Signed-off-by: Pin-Yen Lin <treapking@chromium.org>
---

Changes in v2:
- Update the typo in the summary (power on --> power off)
- Re-write the commit message to make it clearer.

 drivers/gpu/drm/bridge/ite-it6505.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
index 4b673c4792d7..e5626035f311 100644
--- a/drivers/gpu/drm/bridge/ite-it6505.c
+++ b/drivers/gpu/drm/bridge/ite-it6505.c
@@ -2945,6 +2945,9 @@ static void it6505_bridge_atomic_enable(struct drm_bridge *bridge,
 	if (ret)
 		dev_err(dev, "Failed to setup AVI infoframe: %d", ret);
 
+	it6505_drm_dp_link_set_power(&it6505->aux, &it6505->link,
+				     DP_SET_POWER_D0);
+
 	it6505_update_video_parameter(it6505, mode);
 
 	ret = it6505_send_video_infoframe(it6505, &frame);
-- 
2.37.0.144.g8ac04bfd2-goog

RE: [PATCH v2] drm/bridge: it6505: Power on downstream device in .atomic_enable

[allen.chen]

Reviewed-by: Allen Chen <allen.chen@ite.com.tw>

-----Original Message-----
From: Pin-Yen Lin <treapking@chromium.org> 
Sent: Thursday, July 14, 2022 5:39 PM
To: Andrzej Hajda <andrzej.hajda@intel.com>; Neil Armstrong <narmstrong@baylibre.com>; Robert Foss <robert.foss@linaro.org>; Laurent Pinchart <Laurent.pinchart@ideasonboard.com>; Jonas Karlman <jonas@kwiboo.se>; Jernej Skrabec <jernej.skrabec@gmail.com>; David Airlie <airlied@linux.ie>; Daniel Vetter <daniel@ffwll.ch>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>; Allen Chen (陳柏宇) <allen.chen@ite.com.tw>; Pin-Yen Lin <treapking@chromium.org>; dri-devel@lists.freedesktop.org; linux-kernel@vger.kernel.org
Subject: [PATCH v2] drm/bridge: it6505: Power on downstream device in .atomic_enable

Send DPCD DP_SET_POWER_D0 command to the monitor in .atomic_enable callback. Without this command, some monitors won't show up again after changing the resolution.

Fixes: 46ca7da7f1e8 ("drm/bridge: it6505: Send DPCD SET_POWER to downstream")

Signed-off-by: Pin-Yen Lin <treapking@chromium.org>
---

Changes in v2:
- Update the typo in the summary (power on --> power off)
- Re-write the commit message to make it clearer.

 drivers/gpu/drm/bridge/ite-it6505.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
index 4b673c4792d7..e5626035f311 100644
--- a/drivers/gpu/drm/bridge/ite-it6505.c
+++ b/drivers/gpu/drm/bridge/ite-it6505.c
@@ -2945,6 +2945,9 @@ static void it6505_bridge_atomic_enable(struct drm_bridge *bridge,
 	if (ret)
 		dev_err(dev, "Failed to setup AVI infoframe: %d", ret);
 
+	it6505_drm_dp_link_set_power(&it6505->aux, &it6505->link,
+				     DP_SET_POWER_D0);
+
 	it6505_update_video_parameter(it6505, mode);
 
 	ret = it6505_send_video_infoframe(it6505, &frame);
--
2.37.0.144.g8ac04bfd2-goog

Re: [PATCH v2] drm/bridge: it6505: Power on downstream device in .atomic_enable

[Robert Foss]

Applied to drm-misc-next