From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
To: sashiko-reviews@lists.linux.dev
Cc: linux-rt-devel@lists.linux.dev, tj@kernel.org,
hannes@cmpxchg.org, mkoutny@suse.com,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v7 38/40] selftests/sched: Add a test of SCHED_DEADLINE policy round trips
Date: Wed, 18 Nov 2026 08:43:30 -0500 [thread overview]
Message-ID: <a8a0dc12-ab90-493e-90ab-c88309591b1b@efficios.com> (raw)
In-Reply-To: <sashiko-outbox-219058@kernel.org>
> Does pthread_attr_setstacksize(&fa, FILLER_STACK) fail with EINVAL on
> architectures where PTHREAD_STACK_MIN is larger than 64 KiB, such as
> arm64 and powerpc64 (128 KiB)?
Yes, thanks. The case then fails in its setup on those architectures.
deadline_bw_test.c raises its stack to PTHREAD_STACK_MIN. This test
missed it. The next version raises FILLER_STACK the same way.
> Also, pthread_attr_init() and pthread_attr_setstacksize() return an
> error number directly without setting errno, so strerror(errno)
> reports a stale errno (typically "Success"), and this error path
> returns without closing filler_pipe or destroying fa.
Right. The next version splits the setup, so each step prints its own
error. It prints the error number that pthread_attr_*() return. The
error paths now free what the setup made.
> Should test_sysrq_boosted_owner() and test_sysrq_running_owner() call
> sem_destroy() on owner_locked, owner_go, filler_ready, and waiter_go
> during cleanup?
Yes. No thread uses owner_locked when the second case initializes it
again, so it is harmless in practice. But POSIX leaves it undefined. The
next version destroys the semaphores at the end of both cases.
Both points were checked by reading.
Thanks,
Mathieu
--
Mathieu Desnoyers
EfficiOS Inc.
https://www.efficios.com
next prev parent reply other threads:[~2026-11-18 13:43 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-17 14:10 [PATCH v7 00/40] sched/deadline: bandwidth accounting fixes and selftests Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 01/40] sched: Refuse SCHED_FLAG_KEEP_PARAMS that would change the policy or the class Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 02/40] sched/deadline: Do not admit bandwidth for parameters that are kept Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 03/40] sched: Let a task boosted by a deadline waiter change its policy Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 04/40] sched/deadline: Do not divide by zero active CPUs of a root domain Mathieu Desnoyers
2026-11-18 11:20 ` Juri Lelli
2026-11-17 14:10 ` [PATCH v7 05/40] sched/deadline: Refuse dl_server debugfs writes while the rq is offline Mathieu Desnoyers
2026-11-17 14:38 ` sashiko-bot
2026-11-18 13:31 ` Mathieu Desnoyers
2026-11-18 11:26 ` Juri Lelli
2026-11-18 13:45 ` Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 06/40] sched: Take cpuset_mutex for a deadline policy change only with pi Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 07/40] sched/deadline: Do not lose a throttled task switched out and back Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 08/40] sched/deadline: Do not replenish a boost from cleared parameters Mathieu Desnoyers
2026-11-18 13:15 ` Juri Lelli
2026-11-18 13:44 ` Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 09/40] rtmutex: Continue the chain walk when a waiter's deadline donor changes Mathieu Desnoyers
2026-11-17 14:50 ` sashiko-bot
2026-11-18 13:35 ` Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 10/40] sched/deadline: Reset the deadline and the runtime with the parameters Mathieu Desnoyers
2026-11-17 14:55 ` sashiko-bot
2026-11-18 13:34 ` Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 11/40] sched/deadline: Reset the donor's runtime at a deboost in the class Mathieu Desnoyers
2026-11-17 14:55 ` sashiko-bot
2026-11-18 13:36 ` Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 12/40] sched/deadline: Replenish a throttled task boosted while asleep Mathieu Desnoyers
2026-11-17 14:55 ` sashiko-bot
2026-11-18 13:36 ` Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 13/40] sched/deadline: Release the bandwidth of a task that leaves the class asleep Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 14/40] sched/deadline: Reject SCHED_DEADLINE on exited tasks Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 15/40] sched/deadline: Keep departing bandwidth across a root domain rebuild Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 16/40] sched/deadline: Fix this_bw when a task is changed during a remote wakeup Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 17/40] sched/deadline: Rebuild the root domains' accounting from the task list Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 18/40] sched/deadline: Record the root domain holding a task's bandwidth Mathieu Desnoyers
2026-11-17 15:14 ` sashiko-bot
2026-11-18 13:37 ` Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 19/40] sched/deadline: Leave a dying task out of a rebuild of the accounting Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 20/40] sched/deadline: Check SCHED_DEADLINE affinity under the rq lock Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 21/40] sched/deadline: Move a task's bandwidth only where room was made Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 22/40] cgroup/cpuset: Wait for an attach before rebuilding the sched domains Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 23/40] sched: Make deadline policy and affinity changes wait for a cpuset attach Mathieu Desnoyers
2026-11-17 15:18 ` sashiko-bot
2026-11-18 13:38 ` Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 24/40] cgroup/cpuset: Give back the bandwidth an attach did not move Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 25/40] cgroup/cpuset: Reserve the bandwidth in the root domain a task moves to Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 26/40] sched/deadline: Make a rebuild count a task in the root domain it runs in Mathieu Desnoyers
2026-11-17 15:31 ` sashiko-bot
2026-11-18 13:39 ` Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 27/40] sched/deadline: Move a task's bandwidth to " Mathieu Desnoyers
2026-11-17 15:29 ` sashiko-bot
2026-11-18 13:40 ` Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 28/40] sched/deadline: Keep a task in the root domain that counts its bandwidth Mathieu Desnoyers
2026-11-17 15:32 ` sashiko-bot
2026-11-18 13:40 ` Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 29/40] sched/deadline: Keep the last CPU a task has in its root domain Mathieu Desnoyers
2026-11-17 15:41 ` sashiko-bot
2026-11-18 13:41 ` Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 30/40] cgroup/cpuset: Refuse to take a deadline task out of " Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 31/40] sched/deadline: Cancel the replenishment timer with the parameters Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 32/40] sched/deadline: Count the bandwidth a boosted task is given Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 33/40] sched/deadline: Start a period for a task that enters the class blocked Mathieu Desnoyers
2026-11-17 15:46 ` sashiko-bot
2026-11-18 13:42 ` Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 34/40] sched/deadline: Cap the runtime left of a constrained task at dl_runtime Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 35/40] sched/deadline: Check the runtime of a task that comes back runnable Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 36/40] sched/deadline: Check the runtime of a task whose parameters change Mathieu Desnoyers
2026-11-17 15:45 ` sashiko-bot
2026-11-18 13:42 ` Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 37/40] sched/debug: Show the deadline bandwidth of each runqueue Mathieu Desnoyers
2026-11-17 14:10 ` [PATCH v7 38/40] selftests/sched: Add a test of SCHED_DEADLINE policy round trips Mathieu Desnoyers
2026-11-17 15:23 ` sashiko-bot
2026-11-18 13:43 ` Mathieu Desnoyers [this message]
2026-11-17 14:11 ` [PATCH v7 39/40] selftests/sched: Test SCHED_DEADLINE bandwidth across a root domain rebuild Mathieu Desnoyers
2026-11-17 14:11 ` [PATCH v7 40/40] selftests/sched: Add a test of SCHED_DEADLINE bandwidth accounting Mathieu Desnoyers
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a8a0dc12-ab90-493e-90ab-c88309591b1b@efficios.com \
--to=mathieu.desnoyers@efficios.com \
--cc=hannes@cmpxchg.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rt-devel@lists.linux.dev \
--cc=mkoutny@suse.com \
--cc=sashiko-reviews@lists.linux.dev \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®