From: Yosry Ahmed <yosry.ahmed@linux.dev>
To: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Jim Mattson <jmattson@google.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Rik van Riel <riel@surriel.com>,
Tom Lendacky <thomas.lendacky@amd.com>,
x86@kernel.org, kvm@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [RFC PATCH 10/24] KVM: SVM: Use a single ASID per VM
Date: Tue, 22 Apr 2025 02:51:42 -0700 [thread overview]
Message-ID: <aAdmrsQcmEQeNnXb@Asmaa.> (raw)
In-Reply-To: <3d54470accbfdb27b14ec6f0afdb9180ae43d1a6.camel@redhat.com>
On Thu, Apr 03, 2025 at 04:05:41PM -0400, Maxim Levitsky wrote:
> On Wed, 2025-03-26 at 19:36 +0000, Yosry Ahmed wrote:
[..]
> > @@ -5481,6 +5498,12 @@ static __init int svm_hardware_setup(void)
> > goto err;
> > }
> >
> > + fallback_asid = kvm_tlb_tags_alloc(&svm_asids);
> > + WARN_ON_ONCE(!fallback_asid);
>
> Nitpick: This really can't happen unless there is some very bad bug lurking somewhere.
> And if this happens, nothing will work, since likely that regular ASID allocation
> will fail too.
>
> So why not to fail svm_hardware_setup instead?
Yeah I can do that.
>
>
> > +
> > + /* Needs to be after svm_cpu_init() initializes the per-CPU xarrays */
> > + svm_register_asid(fallback_asid);
> > +
> > enable_apicv = avic = avic && avic_hardware_setup();
> >
> > if (!enable_apicv) {
> > diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h
> > index 4929b96d3d700..436b7e83141b9 100644
> > --- a/arch/x86/kvm/svm/svm.h
> > +++ b/arch/x86/kvm/svm/svm.h
> > @@ -117,6 +117,8 @@ struct kvm_sev_info {
> > struct kvm_svm {
> > struct kvm kvm;
> >
> > + unsigned int asid;
> > +
> > /* Struct members for AVIC */
> > u32 avic_vm_id;
> > struct page *avic_logical_id_table_page;
> > @@ -132,7 +134,6 @@ struct kvm_vmcb_info {
> > struct vmcb *ptr;
> > unsigned long pa;
> > int cpu;
> > - uint64_t asid_generation;
> > };
> >
> > struct vmcb_save_area_cached {
> > @@ -247,7 +248,6 @@ struct vcpu_svm {
> > struct vmcb *vmcb;
> > struct kvm_vmcb_info vmcb01;
> > struct kvm_vmcb_info *current_vmcb;
> > - u32 asid;
> > u32 sysenter_esp_hi;
> > u32 sysenter_eip_hi;
> > uint64_t tsc_aux;
> > @@ -330,11 +330,6 @@ struct vcpu_svm {
> > };
> >
> > struct svm_cpu_data {
> > - u64 asid_generation;
> > - u32 max_asid;
> > - u32 next_asid;
> > - u32 min_asid;
> > -
> > struct vmcb *save_area;
> > unsigned long save_area_pa;
> >
> > @@ -656,6 +651,7 @@ void svm_complete_interrupt_delivery(struct kvm_vcpu *vcpu, int delivery_mode,
> > int trig_mode, int vec);
> > bool svm_register_asid(unsigned int asid);
> > void svm_unregister_asid(unsigned int asid);
> > +unsigned int svm_asid(struct kvm *kvm);
> >
> > /* nested.c */
> >
>
> Overall looks good to me.
>
> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Thanks!
>
> Best regards,
> Maxim Levitsky
>
>
>
next prev parent reply other threads:[~2025-04-22 9:51 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-26 19:35 [RFC PATCH 00/24] KVM: SVM: Rework ASID management Yosry Ahmed
2025-03-26 19:35 ` [RFC PATCH 01/24] KVM: VMX: Generalize VPID allocation to be vendor-neutral Yosry Ahmed
2025-03-27 10:58 ` Nikunj A Dadhania
2025-03-27 17:13 ` Yosry Ahmed
2025-03-27 19:42 ` Sean Christopherson
2025-06-23 16:44 ` Sean Christopherson
2025-03-26 19:35 ` [RFC PATCH 02/24] KVM: SVM: Use cached local variable in init_vmcb() Yosry Ahmed
2025-04-03 19:56 ` Maxim Levitsky
2025-03-26 19:35 ` [RFC PATCH 03/24] KVM: SVM: Add helpers to set/clear ASID flush in VMCB Yosry Ahmed
2025-04-03 20:00 ` Maxim Levitsky
2025-06-23 16:46 ` Sean Christopherson
2025-03-26 19:35 ` [RFC PATCH 04/24] KVM: SVM: Flush everything if FLUSHBYASID is not available Yosry Ahmed
2025-04-03 20:00 ` Maxim Levitsky
2025-03-26 19:36 ` [RFC PATCH 05/24] KVM: SVM: Flush the ASID when running on a new CPU Yosry Ahmed
2025-04-03 20:00 ` Maxim Levitsky
2025-03-26 19:36 ` [RFC PATCH 06/24] KVM: SEV: Track ASID->vCPU instead of ASID->VMCB Yosry Ahmed
2025-04-03 20:04 ` Maxim Levitsky
2025-04-22 9:41 ` Yosry Ahmed
2025-06-20 23:13 ` Sean Christopherson
2025-06-23 19:50 ` Tom Lendacky
2025-06-23 20:37 ` Sean Christopherson
2025-03-26 19:36 ` [RFC PATCH 07/24] KVM: SEV: Track ASID->vCPU on vCPU load Yosry Ahmed
2025-04-03 20:04 ` Maxim Levitsky
2025-03-26 19:36 ` [RFC PATCH 08/24] KVM: SEV: Drop pre_sev_run() Yosry Ahmed
2025-04-03 20:04 ` Maxim Levitsky
2025-03-26 19:36 ` [RFC PATCH 09/24] KVM: SEV: Generalize tracking ASID->vCPU with xarrays Yosry Ahmed
2025-04-03 20:05 ` Maxim Levitsky
2025-04-22 9:50 ` Yosry Ahmed
2025-03-26 19:36 ` [RFC PATCH 10/24] KVM: SVM: Use a single ASID per VM Yosry Ahmed
2025-04-03 20:05 ` Maxim Levitsky
2025-04-22 9:51 ` Yosry Ahmed [this message]
2025-03-26 19:36 ` [RFC PATCH 11/24] KVM: nSVM: Use a separate ASID for nested guests Yosry Ahmed
2025-04-03 20:09 ` Maxim Levitsky
2025-04-22 10:08 ` Yosry Ahmed
2025-03-26 19:36 ` [RFC PATCH 12/24] KVM: x86: hyper-v: Pass is_guest_mode to kvm_hv_vcpu_purge_flush_tlb() Yosry Ahmed
2025-04-03 20:09 ` Maxim Levitsky
2025-06-23 19:22 ` Sean Christopherson
2025-03-26 19:36 ` [RFC PATCH 13/24] KVM: nSVM: Parameterize svm_flush_tlb_asid() by is_guest_mode Yosry Ahmed
2025-04-03 20:10 ` Maxim Levitsky
2025-04-22 10:04 ` Yosry Ahmed
2025-03-26 19:36 ` [RFC PATCH 14/24] KVM: nSVM: Split nested_svm_transition_tlb_flush() into entry/exit fns Yosry Ahmed
2025-03-26 19:36 ` [RFC PATCH 15/24] KVM: x86/mmu: rename __kvm_mmu_invalidate_addr() Yosry Ahmed
2025-04-03 20:10 ` Maxim Levitsky
2025-03-26 19:36 ` [RFC PATCH 16/24] KVM: x86/mmu: Allow skipping the gva flush in kvm_mmu_invalidate_addr() Yosry Ahmed
2025-04-03 20:10 ` Maxim Levitsky
2025-03-26 19:36 ` [RFC PATCH 17/24] KVM: nSVM: Flush both L1 and L2 ASIDs on KVM_REQ_TLB_FLUSH Yosry Ahmed
2025-04-03 20:10 ` Maxim Levitsky
2025-03-26 19:41 ` [RFC PATCH 18/24] KVM: nSVM: Handle nested TLB flush requests through TLB_CONTROL Yosry Ahmed
2025-03-26 19:43 ` [RFC PATCH 19/24] KVM: nSVM: Flush the TLB if L1 changes L2's ASID Yosry Ahmed
2025-03-26 19:44 ` [RFC PATCH 20/24] KVM: nSVM: Do not reset TLB_CONTROL in VMCB02 on nested entry Yosry Ahmed
2025-03-26 19:44 ` [RFC PATCH 21/24] KVM: nSVM: Service local TLB flushes before nested transitions Yosry Ahmed
2025-03-26 19:44 ` [RFC PATCH 22/24] KVM: nSVM: Handle INVLPGA interception correctly Yosry Ahmed
2025-04-03 20:10 ` Maxim Levitsky
2025-06-24 1:08 ` Sean Christopherson
2025-03-26 19:44 ` [RFC PATCH 23/24] KVM: nSVM: Allocate a new ASID for nested guests Yosry Ahmed
2025-04-03 20:11 ` Maxim Levitsky
2025-04-22 10:01 ` Yosry Ahmed
2025-03-26 19:44 ` [RFC PATCH 24/24] KVM: nSVM: Stop bombing the TLB on nested transitions Yosry Ahmed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aAdmrsQcmEQeNnXb@Asmaa. \
--to=yosry.ahmed@linux.dev \
--cc=jmattson@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mlevitsk@redhat.com \
--cc=pbonzini@redhat.com \
--cc=riel@surriel.com \
--cc=seanjc@google.com \
--cc=thomas.lendacky@amd.com \
--cc=vkuznets@redhat.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®