mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH v2] PCI: imx6: Enable the vpcie regulator when fetch it
@ 2025-06-19  7:24 Richard Zhu
  2025-06-19 15:03 ` Frank Li
  2025-08-12 17:12 ` Manivannan Sadhasivam
  0 siblings, 2 replies; 4+ messages in thread
From: Richard Zhu @ 2025-06-19  7:24 UTC (permalink / raw)
  To: frank.li, l.stach, lpieralisi, kwilczynski, mani, robh, bhelgaas,
	shawnguo, s.hauer, kernel, festevam
  Cc: linux-pci, linux-arm-kernel, imx, linux-kernel, Richard Zhu

Enable the vpcie regulator at probe time and keep it enabled for the
entire PCIe controller lifecycle. This ensures support for outbound
wake-up mechanism such as WAKE# signaling.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 27 ++++-----------------------
 1 file changed, 4 insertions(+), 23 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 5a38cfaf989b..7cab4bcfae56 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -159,7 +159,6 @@ struct imx_pcie {
 	u32			tx_deemph_gen2_6db;
 	u32			tx_swing_full;
 	u32			tx_swing_low;
-	struct regulator	*vpcie;
 	struct regulator	*vph;
 	void __iomem		*phy_base;
 
@@ -1198,15 +1197,6 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
 	struct imx_pcie *imx_pcie = to_imx_pcie(pci);
 	int ret;
 
-	if (imx_pcie->vpcie) {
-		ret = regulator_enable(imx_pcie->vpcie);
-		if (ret) {
-			dev_err(dev, "failed to enable vpcie regulator: %d\n",
-				ret);
-			return ret;
-		}
-	}
-
 	if (pp->bridge && imx_check_flag(imx_pcie, IMX_PCIE_FLAG_HAS_LUT)) {
 		pp->bridge->enable_device = imx_pcie_enable_device;
 		pp->bridge->disable_device = imx_pcie_disable_device;
@@ -1222,7 +1212,7 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
 	ret = imx_pcie_clk_enable(imx_pcie);
 	if (ret) {
 		dev_err(dev, "unable to enable pcie clocks: %d\n", ret);
-		goto err_reg_disable;
+		return ret;
 	}
 
 	if (imx_pcie->phy) {
@@ -1269,9 +1259,6 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
 	phy_exit(imx_pcie->phy);
 err_clk_disable:
 	imx_pcie_clk_disable(imx_pcie);
-err_reg_disable:
-	if (imx_pcie->vpcie)
-		regulator_disable(imx_pcie->vpcie);
 	return ret;
 }
 
@@ -1286,9 +1273,6 @@ static void imx_pcie_host_exit(struct dw_pcie_rp *pp)
 		phy_exit(imx_pcie->phy);
 	}
 	imx_pcie_clk_disable(imx_pcie);
-
-	if (imx_pcie->vpcie)
-		regulator_disable(imx_pcie->vpcie);
 }
 
 static void imx_pcie_host_post_init(struct dw_pcie_rp *pp)
@@ -1739,12 +1723,9 @@ static int imx_pcie_probe(struct platform_device *pdev)
 	pci->max_link_speed = 1;
 	of_property_read_u32(node, "fsl,max-link-speed", &pci->max_link_speed);
 
-	imx_pcie->vpcie = devm_regulator_get_optional(&pdev->dev, "vpcie");
-	if (IS_ERR(imx_pcie->vpcie)) {
-		if (PTR_ERR(imx_pcie->vpcie) != -ENODEV)
-			return PTR_ERR(imx_pcie->vpcie);
-		imx_pcie->vpcie = NULL;
-	}
+	ret = devm_regulator_get_enable_optional(&pdev->dev, "vpcie");
+	if (ret < 0 && ret != -ENODEV)
+		return dev_err_probe(dev, ret, "failed to enable vpcie");
 
 	imx_pcie->vph = devm_regulator_get_optional(&pdev->dev, "vph");
 	if (IS_ERR(imx_pcie->vph)) {
-- 
2.37.1


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH v2] PCI: imx6: Enable the vpcie regulator when fetch it
  2025-06-19  7:24 [PATCH v2] PCI: imx6: Enable the vpcie regulator when fetch it Richard Zhu
@ 2025-06-19 15:03 ` Frank Li
  2025-08-12 17:12 ` Manivannan Sadhasivam
  1 sibling, 0 replies; 4+ messages in thread
From: Frank Li @ 2025-06-19 15:03 UTC (permalink / raw)
  To: Richard Zhu
  Cc: l.stach, lpieralisi, kwilczynski, mani, robh, bhelgaas, shawnguo,
	s.hauer, kernel, festevam, linux-pci, linux-arm-kernel, imx,
	linux-kernel

On Thu, Jun 19, 2025 at 03:24:38PM +0800, Richard Zhu wrote:
> Enable the vpcie regulator at probe time and keep it enabled for the
> entire PCIe controller lifecycle. This ensures support for outbound
> wake-up mechanism such as WAKE# signaling.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>

Reviewed-by: Frank Li <Frank.Li@nxp.com>

> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 27 ++++-----------------------
>  1 file changed, 4 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 5a38cfaf989b..7cab4bcfae56 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -159,7 +159,6 @@ struct imx_pcie {
>  	u32			tx_deemph_gen2_6db;
>  	u32			tx_swing_full;
>  	u32			tx_swing_low;
> -	struct regulator	*vpcie;
>  	struct regulator	*vph;
>  	void __iomem		*phy_base;
>
> @@ -1198,15 +1197,6 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
>  	struct imx_pcie *imx_pcie = to_imx_pcie(pci);
>  	int ret;
>
> -	if (imx_pcie->vpcie) {
> -		ret = regulator_enable(imx_pcie->vpcie);
> -		if (ret) {
> -			dev_err(dev, "failed to enable vpcie regulator: %d\n",
> -				ret);
> -			return ret;
> -		}
> -	}
> -
>  	if (pp->bridge && imx_check_flag(imx_pcie, IMX_PCIE_FLAG_HAS_LUT)) {
>  		pp->bridge->enable_device = imx_pcie_enable_device;
>  		pp->bridge->disable_device = imx_pcie_disable_device;
> @@ -1222,7 +1212,7 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
>  	ret = imx_pcie_clk_enable(imx_pcie);
>  	if (ret) {
>  		dev_err(dev, "unable to enable pcie clocks: %d\n", ret);
> -		goto err_reg_disable;
> +		return ret;
>  	}
>
>  	if (imx_pcie->phy) {
> @@ -1269,9 +1259,6 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
>  	phy_exit(imx_pcie->phy);
>  err_clk_disable:
>  	imx_pcie_clk_disable(imx_pcie);
> -err_reg_disable:
> -	if (imx_pcie->vpcie)
> -		regulator_disable(imx_pcie->vpcie);
>  	return ret;
>  }
>
> @@ -1286,9 +1273,6 @@ static void imx_pcie_host_exit(struct dw_pcie_rp *pp)
>  		phy_exit(imx_pcie->phy);
>  	}
>  	imx_pcie_clk_disable(imx_pcie);
> -
> -	if (imx_pcie->vpcie)
> -		regulator_disable(imx_pcie->vpcie);
>  }
>
>  static void imx_pcie_host_post_init(struct dw_pcie_rp *pp)
> @@ -1739,12 +1723,9 @@ static int imx_pcie_probe(struct platform_device *pdev)
>  	pci->max_link_speed = 1;
>  	of_property_read_u32(node, "fsl,max-link-speed", &pci->max_link_speed);
>
> -	imx_pcie->vpcie = devm_regulator_get_optional(&pdev->dev, "vpcie");
> -	if (IS_ERR(imx_pcie->vpcie)) {
> -		if (PTR_ERR(imx_pcie->vpcie) != -ENODEV)
> -			return PTR_ERR(imx_pcie->vpcie);
> -		imx_pcie->vpcie = NULL;
> -	}
> +	ret = devm_regulator_get_enable_optional(&pdev->dev, "vpcie");
> +	if (ret < 0 && ret != -ENODEV)
> +		return dev_err_probe(dev, ret, "failed to enable vpcie");
>
>  	imx_pcie->vph = devm_regulator_get_optional(&pdev->dev, "vph");
>  	if (IS_ERR(imx_pcie->vph)) {
> --
> 2.37.1
>

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH v2] PCI: imx6: Enable the vpcie regulator when fetch it
  2025-06-19  7:24 [PATCH v2] PCI: imx6: Enable the vpcie regulator when fetch it Richard Zhu
  2025-06-19 15:03 ` Frank Li
@ 2025-08-12 17:12 ` Manivannan Sadhasivam
  2025-08-14  5:54   ` Hongxing Zhu
  1 sibling, 1 reply; 4+ messages in thread
From: Manivannan Sadhasivam @ 2025-08-12 17:12 UTC (permalink / raw)
  To: Richard Zhu
  Cc: frank.li, l.stach, lpieralisi, kwilczynski, robh, bhelgaas,
	shawnguo, s.hauer, kernel, festevam, linux-pci, linux-arm-kernel,
	imx, linux-kernel

On Thu, Jun 19, 2025 at 03:24:38PM GMT, Richard Zhu wrote:
> Enable the vpcie regulator at probe time and keep it enabled for the
> entire PCIe controller lifecycle. This ensures support for outbound
> wake-up mechanism such as WAKE# signaling.

I'm not sure about this part. For supporting WAKE#, Vaux supply has to be
supplied to the endpoint. But here, 'vpcie' looks like the main 3.3V supply. So
keeping it always on to support WAKE#, sounds to me that the component never
enters the D3Cold state. So no WAKE# is required.

- Mani

> 
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 27 ++++-----------------------
>  1 file changed, 4 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 5a38cfaf989b..7cab4bcfae56 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -159,7 +159,6 @@ struct imx_pcie {
>  	u32			tx_deemph_gen2_6db;
>  	u32			tx_swing_full;
>  	u32			tx_swing_low;
> -	struct regulator	*vpcie;
>  	struct regulator	*vph;
>  	void __iomem		*phy_base;
>  
> @@ -1198,15 +1197,6 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
>  	struct imx_pcie *imx_pcie = to_imx_pcie(pci);
>  	int ret;
>  
> -	if (imx_pcie->vpcie) {
> -		ret = regulator_enable(imx_pcie->vpcie);
> -		if (ret) {
> -			dev_err(dev, "failed to enable vpcie regulator: %d\n",
> -				ret);
> -			return ret;
> -		}
> -	}
> -
>  	if (pp->bridge && imx_check_flag(imx_pcie, IMX_PCIE_FLAG_HAS_LUT)) {
>  		pp->bridge->enable_device = imx_pcie_enable_device;
>  		pp->bridge->disable_device = imx_pcie_disable_device;
> @@ -1222,7 +1212,7 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
>  	ret = imx_pcie_clk_enable(imx_pcie);
>  	if (ret) {
>  		dev_err(dev, "unable to enable pcie clocks: %d\n", ret);
> -		goto err_reg_disable;
> +		return ret;
>  	}
>  
>  	if (imx_pcie->phy) {
> @@ -1269,9 +1259,6 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
>  	phy_exit(imx_pcie->phy);
>  err_clk_disable:
>  	imx_pcie_clk_disable(imx_pcie);
> -err_reg_disable:
> -	if (imx_pcie->vpcie)
> -		regulator_disable(imx_pcie->vpcie);
>  	return ret;
>  }
>  
> @@ -1286,9 +1273,6 @@ static void imx_pcie_host_exit(struct dw_pcie_rp *pp)
>  		phy_exit(imx_pcie->phy);
>  	}
>  	imx_pcie_clk_disable(imx_pcie);
> -
> -	if (imx_pcie->vpcie)
> -		regulator_disable(imx_pcie->vpcie);
>  }
>  
>  static void imx_pcie_host_post_init(struct dw_pcie_rp *pp)
> @@ -1739,12 +1723,9 @@ static int imx_pcie_probe(struct platform_device *pdev)
>  	pci->max_link_speed = 1;
>  	of_property_read_u32(node, "fsl,max-link-speed", &pci->max_link_speed);
>  
> -	imx_pcie->vpcie = devm_regulator_get_optional(&pdev->dev, "vpcie");
> -	if (IS_ERR(imx_pcie->vpcie)) {
> -		if (PTR_ERR(imx_pcie->vpcie) != -ENODEV)
> -			return PTR_ERR(imx_pcie->vpcie);
> -		imx_pcie->vpcie = NULL;
> -	}
> +	ret = devm_regulator_get_enable_optional(&pdev->dev, "vpcie");
> +	if (ret < 0 && ret != -ENODEV)
> +		return dev_err_probe(dev, ret, "failed to enable vpcie");
>  
>  	imx_pcie->vph = devm_regulator_get_optional(&pdev->dev, "vph");
>  	if (IS_ERR(imx_pcie->vph)) {
> -- 
> 2.37.1
> 

-- 
மணிவண்ணன் சதாசிவம்

^ permalink raw reply	[flat|nested] 4+ messages in thread

* RE: [PATCH v2] PCI: imx6: Enable the vpcie regulator when fetch it
  2025-08-12 17:12 ` Manivannan Sadhasivam
@ 2025-08-14  5:54   ` Hongxing Zhu
  0 siblings, 0 replies; 4+ messages in thread
From: Hongxing Zhu @ 2025-08-14  5:54 UTC (permalink / raw)
  To: Manivannan Sadhasivam
  Cc: Frank Li, l.stach, lpieralisi, kwilczynski, robh, bhelgaas,
	shawnguo, s.hauer, kernel, festevam, linux-pci, linux-arm-kernel,
	imx, linux-kernel

> -----Original Message-----
> From: Manivannan Sadhasivam <mani@kernel.org>
> Sent: 2025年8月13日 1:12
> To: Hongxing Zhu <hongxing.zhu@nxp.com>
> Cc: Frank Li <frank.li@nxp.com>; l.stach@pengutronix.de;
> lpieralisi@kernel.org; kwilczynski@kernel.org; robh@kernel.org;
> bhelgaas@google.com; shawnguo@kernel.org; s.hauer@pengutronix.de;
> kernel@pengutronix.de; festevam@gmail.com; linux-pci@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org; imx@lists.linux.dev;
> linux-kernel@vger.kernel.org
> Subject: Re: [PATCH v2] PCI: imx6: Enable the vpcie regulator when fetch it
> 
> On Thu, Jun 19, 2025 at 03:24:38PM GMT, Richard Zhu wrote:
> > Enable the vpcie regulator at probe time and keep it enabled for the
> > entire PCIe controller lifecycle. This ensures support for outbound
> > wake-up mechanism such as WAKE# signaling.
> 
> I'm not sure about this part. For supporting WAKE#, Vaux supply has to be
> supplied to the endpoint. But here, 'vpcie' looks like the main 3.3V supply.
> So keeping it always on to support WAKE#, sounds to me that the
> component never enters the D3Cold state. So no WAKE# is required.
Hi Mani:
Thanks for your comments. You're right.
Another +3.3Vaux should be added to power up the WAKE# circuit.

Best Regards
Richard Zhu
> 
> - Mani
> 
> >
> > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> > ---
> >  drivers/pci/controller/dwc/pci-imx6.c | 27
> > ++++-----------------------
> >  1 file changed, 4 insertions(+), 23 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pci-imx6.c
> > b/drivers/pci/controller/dwc/pci-imx6.c
> > index 5a38cfaf989b..7cab4bcfae56 100644
> > --- a/drivers/pci/controller/dwc/pci-imx6.c
> > +++ b/drivers/pci/controller/dwc/pci-imx6.c
> > @@ -159,7 +159,6 @@ struct imx_pcie {
> >  	u32			tx_deemph_gen2_6db;
> >  	u32			tx_swing_full;
> >  	u32			tx_swing_low;
> > -	struct regulator	*vpcie;
> >  	struct regulator	*vph;
> >  	void __iomem		*phy_base;
> >
> > @@ -1198,15 +1197,6 @@ static int imx_pcie_host_init(struct dw_pcie_rp
> *pp)
> >  	struct imx_pcie *imx_pcie = to_imx_pcie(pci);
> >  	int ret;
> >
> > -	if (imx_pcie->vpcie) {
> > -		ret = regulator_enable(imx_pcie->vpcie);
> > -		if (ret) {
> > -			dev_err(dev, "failed to enable vpcie regulator: %d\n",
> > -				ret);
> > -			return ret;
> > -		}
> > -	}
> > -
> >  	if (pp->bridge && imx_check_flag(imx_pcie, IMX_PCIE_FLAG_HAS_LUT)) {
> >  		pp->bridge->enable_device = imx_pcie_enable_device;
> >  		pp->bridge->disable_device = imx_pcie_disable_device; @@ -1222,7
> > +1212,7 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
> >  	ret = imx_pcie_clk_enable(imx_pcie);
> >  	if (ret) {
> >  		dev_err(dev, "unable to enable pcie clocks: %d\n", ret);
> > -		goto err_reg_disable;
> > +		return ret;
> >  	}
> >
> >  	if (imx_pcie->phy) {
> > @@ -1269,9 +1259,6 @@ static int imx_pcie_host_init(struct dw_pcie_rp
> *pp)
> >  	phy_exit(imx_pcie->phy);
> >  err_clk_disable:
> >  	imx_pcie_clk_disable(imx_pcie);
> > -err_reg_disable:
> > -	if (imx_pcie->vpcie)
> > -		regulator_disable(imx_pcie->vpcie);
> >  	return ret;
> >  }
> >
> > @@ -1286,9 +1273,6 @@ static void imx_pcie_host_exit(struct dw_pcie_rp
> *pp)
> >  		phy_exit(imx_pcie->phy);
> >  	}
> >  	imx_pcie_clk_disable(imx_pcie);
> > -
> > -	if (imx_pcie->vpcie)
> > -		regulator_disable(imx_pcie->vpcie);
> >  }
> >
> >  static void imx_pcie_host_post_init(struct dw_pcie_rp *pp) @@
> > -1739,12 +1723,9 @@ static int imx_pcie_probe(struct platform_device
> *pdev)
> >  	pci->max_link_speed = 1;
> >  	of_property_read_u32(node, "fsl,max-link-speed",
> > &pci->max_link_speed);
> >
> > -	imx_pcie->vpcie = devm_regulator_get_optional(&pdev->dev, "vpcie");
> > -	if (IS_ERR(imx_pcie->vpcie)) {
> > -		if (PTR_ERR(imx_pcie->vpcie) != -ENODEV)
> > -			return PTR_ERR(imx_pcie->vpcie);
> > -		imx_pcie->vpcie = NULL;
> > -	}
> > +	ret = devm_regulator_get_enable_optional(&pdev->dev, "vpcie");
> > +	if (ret < 0 && ret != -ENODEV)
> > +		return dev_err_probe(dev, ret, "failed to enable vpcie");
> >
> >  	imx_pcie->vph = devm_regulator_get_optional(&pdev->dev, "vph");
> >  	if (IS_ERR(imx_pcie->vph)) {
> > --
> > 2.37.1
> >
> 
> --
> மணிவண்ணன் சதாசிவம்

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2025-08-14  5:54 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-06-19  7:24 [PATCH v2] PCI: imx6: Enable the vpcie regulator when fetch it Richard Zhu
2025-06-19 15:03 ` Frank Li
2025-08-12 17:12 ` Manivannan Sadhasivam
2025-08-14  5:54   ` Hongxing Zhu

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®