Re: [PATCH v3 3/6] spi: spi-fsl-dspi: Stub out DMA functions

[Frank Li <Frank.li@nxp.com>]

On Tue, Jun 24, 2025 at 11:35:33AM +0100, James Clark wrote:
> This will allow the build to succeed with !CONFIG_HAS_DMA, either due to
> a randconfig build test or when the target only uses one of the non-DMA

I supposed you met kbuild error. If yes, can you add kbuild build report
tags.

Frank
> transfer modes which this driver supports.
>
> Signed-off-by: James Clark <james.clark@linaro.org>
> ---
>  drivers/spi/spi-fsl-dspi.c | 17 +++++++++++++++--
>  1 file changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
> index feb29bb92a77..8212c4193536 100644
> --- a/drivers/spi/spi-fsl-dspi.c
> +++ b/drivers/spi/spi-fsl-dspi.c
> @@ -373,6 +373,8 @@ struct fsl_dspi {
>  	void (*dev_to_host)(struct fsl_dspi *dspi, u32 rxdata);
>  };
>
> +static void dspi_setup_accel(struct fsl_dspi *dspi);
> +
>  static bool is_s32g_dspi(struct fsl_dspi *data)
>  {
>  	return data->devtype_data == &devtype_data[S32G] ||
> @@ -489,6 +491,7 @@ static void dspi_push_rx(struct fsl_dspi *dspi, u32 rxdata)
>  	dspi->dev_to_host(dspi, rxdata);
>  }
>
> +#if IS_ENABLED(CONFIG_HAS_DMA)
>  static void dspi_tx_dma_callback(void *arg)
>  {
>  	struct fsl_dspi *dspi = arg;
> @@ -589,8 +592,6 @@ static int dspi_next_xfer_dma_submit(struct fsl_dspi *dspi)
>  	return 0;
>  }
>
> -static void dspi_setup_accel(struct fsl_dspi *dspi);
> -
>  static void dspi_dma_xfer(struct fsl_dspi *dspi)
>  {
>  	struct spi_message *message = dspi->cur_msg;
> @@ -722,6 +723,18 @@ static void dspi_release_dma(struct fsl_dspi *dspi)
>  		dma_release_channel(dma->chan_rx);
>  	}
>  }
> +#else
> +static void dspi_dma_xfer(struct fsl_dspi *dspi)
> +{
> +	sdpi->cur_msg->status = -EINVAL;
> +}
> +static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr)
> +{
> +	dev_err(&dspi->pdev->dev, "DMA support not enabled in kernel\n");
> +	return -EINVAL;
> +}
> +static void dspi_release_dma(struct fsl_dspi *dspi) {}
> +#endif
>
>  static void hz_to_spi_baud(char *pbr, char *br, int speed_hz,
>  			   unsigned long clkrate, bool mtf_enabled)
>
> --
> 2.34.1
>