From: "Luck, Tony" <tony.luck@intel.com>
To: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: <linux-edac@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<x86@kernel.org>, <avadhut.naik@amd.com>, <john.allen@amd.com>
Subject: Re: [PATCH v2] x86/mce: Do away with unnecessary context quirks
Date: Thu, 14 Aug 2025 12:52:19 -0700 [thread overview]
Message-ID: <aJ4-c0gNPbwwU3jk@agluck-desk3> (raw)
In-Reply-To: <20250814193056.GA192444@yaz-khff2.amd.com>
On Thu, Aug 14, 2025 at 03:30:56PM -0400, Yazen Ghannam wrote:
> On Thu, Aug 14, 2025 at 09:54:54AM -0700, Luck, Tony wrote:
> > On Thu, Aug 14, 2025 at 11:48:09AM -0400, Yazen Ghannam wrote:
> > > -/*
> > > - * During IFU recovery Sandy Bridge -EP4S processors set the RIPV and
> > > - * EIPV bits in MCG_STATUS to zero on the affected logical processor (SDM
> > > - * Vol 3B Table 15-20). But this confuses both the code that determines
> > > - * whether the machine check occurred in kernel or user mode, and also
> > > - * the severity assessment code. Pretend that EIPV was set, and take the
> > > - * ip/cs values from the pt_regs that mce_gather_info() ignored earlier.
> > > - */
> > > -static __always_inline void
> > > -quirk_sandybridge_ifu(int bank, struct mce *m, struct pt_regs *regs)
> > > -{
> > > - if (bank != 0)
> > > - return;
> > > - if ((m->mcgstatus & (MCG_STATUS_EIPV|MCG_STATUS_RIPV)) != 0)
> > > - return;
> > > - if ((m->status & (MCI_STATUS_OVER|MCI_STATUS_UC|
> > > - MCI_STATUS_EN|MCI_STATUS_MISCV|MCI_STATUS_ADDRV|
> > > - MCI_STATUS_PCC|MCI_STATUS_S|MCI_STATUS_AR|
> > > - MCACOD)) !=
> > > - (MCI_STATUS_UC|MCI_STATUS_EN|
> > > - MCI_STATUS_MISCV|MCI_STATUS_ADDRV|MCI_STATUS_S|
> > > - MCI_STATUS_AR|MCACOD_INSTR))
> > > - return;
> > > -
> > > - m->mcgstatus |= MCG_STATUS_EIPV;
> >
> > I don't think this part of the Sandybridge quirk is covered in your
> > new code. Without EIPV set, the Intel severity table driven code will
> > fail to note this as recoverable.
> >
>
> Which severity do you mean? EIPV is not needed to be set in any of them.
>
> Unless you mean this check:
>
> if (!mc_recoverable(m->mcgstatus))
> return IN_KERNEL;
>
> This would never give the "IN_KERNEL_RECOV" context.
>
> And this is the only case affected:
> "Action required: data load in error recoverable area of kernel"
>
> But that is for "Data": MCACOD_DATA
>
> And the quirk is for "Instructions": MCACOD_INSTR
>
> So I *think* we're covered.
>
> I got the impression that setting EIPV in the quirk was to fake our way
> through getting the CS register. It seemed to me that it wasn't directly
> needed for severity grading in the quirky case.
>
> If we unconditionally get the CS register, then we no longer need to
> fake EIPV. At least, that is my understanding.
Yazen,
It's horribly subtle. On Sandybridge machine check bank 0 is shared by
the two hyperthreads on a core, and machine checks are always broadcast.
For instruction poison consumption both threads on the core see the
machine check and the same IA32_MC0_STATUS value.
IA32_MCG_STATUS is per-thread.
The thread that tried to consume the poison sees: RIPV=0, EIPV=0, MCIP=1
The innocent bystander thread sees: RIPV=1, EIPV=0, MCIP=1
The innocent bystander matches this entry in the severity table:
MCESEV(
KEEP, "Action required but unaffected thread is continuable",
SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR, MCI_UC_SAR|MCI_ADDR),
MCGMASK(MCG_STATUS_RIPV|MCG_STATUS_EIPV, MCG_STATUS_RIPV)
),
I need the consuming thread to match this one:
MCESEV(
AR, "Action required: instruction fetch error in a user process",
SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR|MCACOD_INSTR),
USER
),
But the first match nature of the table means that this rule hits
(becauase neither or RIPV or EIPV is set):
/* Neither return not error IP -- no chance to recover -> PANIC */
MCESEV(
PANIC, "Neither restart nor error IP",
EXCP, MCGMASK(MCG_STATUS_RIPV|MCG_STATUS_EIPV, 0)
),
-Tony
next prev parent reply other threads:[~2025-08-14 19:54 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-14 15:48 Yazen Ghannam
2025-08-14 16:54 ` Luck, Tony
2025-08-14 19:30 ` Yazen Ghannam
2025-08-14 19:52 ` Luck, Tony [this message]
2025-08-14 21:07 ` Yazen Ghannam
2025-08-14 22:17 ` Luck, Tony
2025-08-15 13:42 ` Yazen Ghannam
2025-08-15 16:14 ` Luck, Tony
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aJ4-c0gNPbwwU3jk@agluck-desk3 \
--to=tony.luck@intel.com \
--cc=avadhut.naik@amd.com \
--cc=john.allen@amd.com \
--cc=linux-edac@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=x86@kernel.org \
--cc=yazen.ghannam@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®