From: Frank Li <Frank.li@nxp.com>
To: Koichiro Den <den@valinux.co.jp>
Cc: ntb@lists.linux.dev, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org, jdmason@kudzu.us,
dave.jiang@intel.com, allenbh@gmail.com, mani@kernel.org,
kwilczynski@kernel.org, kishon@kernel.org, bhelgaas@google.com,
jbrunet@baylibre.com, lpieralisi@kernel.org, yebin10@huawei.com,
geert+renesas@glider.be, arnd@arndb.de
Subject: Re: [PATCH 3/6] PCI: endpoint: pci-epf-vntb: Remove duplicate resource teardown
Date: Fri, 24 Oct 2025 17:16:20 -0400 [thread overview]
Message-ID: <aPvspDh6VJYjCjyS@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20251023071757.901181-4-den@valinux.co.jp>
On Thu, Oct 23, 2025 at 04:17:54PM +0900, Koichiro Den wrote:
> epf_ntb_epc_destroy() duplicates the teardown that the caller is
> supposed to perform later. This leads to an oops when .allow_link fails
> or when .drop_link is performed. The following is an example oops of the
> former case:
>
> Unable to handle kernel paging request at virtual address dead000000000108
> [...]
> [dead000000000108] address between user and kernel address ranges
> Internal error: Oops: 0000000096000044 [#1] SMP
> [...]
> Call trace:
> pci_epc_remove_epf+0x78/0xe0 (P)
> pci_primary_epc_epf_link+0x88/0xa8
> configfs_symlink+0x1f4/0x5a0
> vfs_symlink+0x134/0x1d8
> do_symlinkat+0x88/0x138
> __arm64_sys_symlinkat+0x74/0xe0
> [...]
>
> Remove the helper, and drop pci_epc_put(). EPC device refcounting is
> tied to the configfs EPC group lifetime, and pci_epc_put() in the
> .drop_link path is sufficient.
>
> Cc: <stable@vger.kernel.org>
> Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP")
> Signed-off-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> ---
> drivers/pci/endpoint/functions/pci-epf-vntb.c | 19 +------------------
> 1 file changed, 1 insertion(+), 18 deletions(-)
>
> diff --git a/drivers/pci/endpoint/functions/pci-epf-vntb.c b/drivers/pci/endpoint/functions/pci-epf-vntb.c
> index 83e9ab10f9c4..49ce5d4b0ee5 100644
> --- a/drivers/pci/endpoint/functions/pci-epf-vntb.c
> +++ b/drivers/pci/endpoint/functions/pci-epf-vntb.c
> @@ -644,19 +644,6 @@ static void epf_ntb_mw_bar_clear(struct epf_ntb *ntb, int num_mws)
> }
> }
>
> -/**
> - * epf_ntb_epc_destroy() - Cleanup NTB EPC interface
> - * @ntb: NTB device that facilitates communication between HOST and VHOST
> - *
> - * Wrapper for epf_ntb_epc_destroy_interface() to cleanup all the NTB interfaces
> - */
> -static void epf_ntb_epc_destroy(struct epf_ntb *ntb)
> -{
> - pci_epc_remove_epf(ntb->epf->epc, ntb->epf, 0);
> - pci_epc_put(ntb->epf->epc);
> -}
> -
> -
> /**
> * epf_ntb_is_bar_used() - Check if a bar is used in the ntb configuration
> * @ntb: NTB device that facilitates communication between HOST and VHOST
> @@ -1406,7 +1393,7 @@ static int epf_ntb_bind(struct pci_epf *epf)
> ret = epf_ntb_init_epc_bar(ntb);
> if (ret) {
> dev_err(dev, "Failed to create NTB EPC\n");
> - goto err_bar_init;
> + return ret;
> }
>
> ret = epf_ntb_config_spad_bar_alloc(ntb);
> @@ -1446,9 +1433,6 @@ static int epf_ntb_bind(struct pci_epf *epf)
> err_bar_alloc:
> epf_ntb_config_spad_bar_free(ntb);
>
> -err_bar_init:
> - epf_ntb_epc_destroy(ntb);
> -
> return ret;
> }
>
> @@ -1464,7 +1448,6 @@ static void epf_ntb_unbind(struct pci_epf *epf)
>
> epf_ntb_epc_cleanup(ntb);
> epf_ntb_config_spad_bar_free(ntb);
> - epf_ntb_epc_destroy(ntb);
>
> pci_unregister_driver(&vntb_pci_driver);
> }
> --
> 2.48.1
>
next prev parent reply other threads:[~2025-10-24 21:16 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-23 7:17 [PATCH 0/6] PCI: endpoint/NTB: Harden vNTB resource management Koichiro Den
2025-10-23 7:17 ` [PATCH 1/6] NTB: epf: Avoid pci_iounmap() with offset when PEER_SPAD and CONFIG share BAR Koichiro Den
2025-10-24 15:45 ` Frank Li
2025-10-24 16:45 ` Koichiro Den
2025-10-23 7:17 ` [PATCH 2/6] PCI: endpoint: Fix parameter order for .drop_link Koichiro Den
2025-10-24 15:48 ` Frank Li
2025-10-23 7:17 ` [PATCH 3/6] PCI: endpoint: pci-epf-vntb: Remove duplicate resource teardown Koichiro Den
2025-10-24 21:16 ` Frank Li [this message]
2025-10-23 7:17 ` [PATCH 4/6] PCI: endpoint: pci-epf-ntb: " Koichiro Den
2025-10-23 7:17 ` [PATCH 5/6] NTB: epf: vntb: Stop cmd_andler work in epf_ntb_epc_cleanup Koichiro Den
2025-10-24 18:44 ` Frank Li
2025-10-27 5:40 ` Koichiro Den
2025-10-23 7:17 ` [PATCH 6/6] PCI: endpoint: pci-epf-vntb: Manage ntb_dev lifetime and fix vpci bus teardown Koichiro Den
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aPvspDh6VJYjCjyS@lizhi-Precision-Tower-5810 \
--to=frank.li@nxp.com \
--cc=allenbh@gmail.com \
--cc=arnd@arndb.de \
--cc=bhelgaas@google.com \
--cc=dave.jiang@intel.com \
--cc=den@valinux.co.jp \
--cc=geert+renesas@glider.be \
--cc=jbrunet@baylibre.com \
--cc=jdmason@kudzu.us \
--cc=kishon@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=ntb@lists.linux.dev \
--cc=yebin10@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®