mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Sakari Ailus <sakari.ailus@iki.fi>
To: Arun T <arun.t@intel.com>
Cc: mehdi.djait@linux.intel.com, linux-media@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/2] platform/x86: int3472: Add board data for Intel nvl
Date: Sun, 1 Mar 2026 16:37:38 +0200	[thread overview]
Message-ID: <aaRPMtWnX7nWShmv@valkosipuli.retiisi.eu> (raw)
In-Reply-To: <20260227133542.970820-2-arun.t@intel.com>

Hi Arun,

Thanks for the update. Please avoid using --in-reply-to argument for git
send-email when sending a new version of the patchset on the next time.

Could you cc me to my @linux.intel.com address on the next time?

Also cc other maintainers, see what

	$ scripts/get_maintainer.pl drivers/platform/x86/intel/int3472/

prints.

On Fri, Feb 27, 2026 at 07:05:41PM +0530, Arun T wrote:
> The Intel Nvl O13b10 sensor with the Intel IPU8 ISP.
> The sensor is powered by a TPS68470 PMIC, and so we
> need some board data to describe how to configure the GPIOs and
> regulators to run the sensor.

This can be rewrapped and fits to three lines; also see
Documentation/process/submitting-patches.rst . Most editors can do that
without too much manual work.

> 
> Signed-off-by: Arun T <arun.t@intel.com>
> ---
>  .../x86/intel/int3472/tps68470_board_data.c   | 150 ++++++++++++++++++
>  1 file changed, 150 insertions(+)
> 
> diff --git a/drivers/platform/x86/intel/int3472/tps68470_board_data.c b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
> index 71357a036292..71dc0940a94b 100644
> --- a/drivers/platform/x86/intel/int3472/tps68470_board_data.c
> +++ b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
> @@ -143,6 +143,34 @@ static struct regulator_consumer_supply int3479_aux2_consumer_supplies[] = {
>  	REGULATOR_SUPPLY("dovdd", "i2c-INT3479:00"),
>  };
>  
> +/* Settings for Intel NVL platform */
> +
> +static struct regulator_consumer_supply int3472_core_consumer_supplies[] = {
> +	REGULATOR_SUPPLY("dvdd", "i2c-OVTI13B1:00"),
> +};
> +
> +static struct regulator_consumer_supply int3472_ana_consumer_supplies[] = {
> +	REGULATOR_SUPPLY("ana", "i2c-OVTI13B1:00"),
> +};
> +
> +static struct regulator_consumer_supply int3472_vcm_consumer_supplies[] = {
> +	REGULATOR_SUPPLY("vdd", "i2c-OVTI13B1:00"),
> +};
> +
> +static struct regulator_consumer_supply int3472_vsio_consumer_supplies[] = {
> +	REGULATOR_SUPPLY("dovdd", "i2c-OVTI13B1:00"),
> +	REGULATOR_SUPPLY("vsio", "i2c-OVTI13B1:00"),
> +	REGULATOR_SUPPLY("vddd", "i2c-OVTI13B1:00"),
> +};
> +
> +static struct regulator_consumer_supply int3472_aux1_consumer_supplies[] = {
> +	REGULATOR_SUPPLY("vdda", "i2c-OVTI13B1:00"),
> +};
> +
> +static struct regulator_consumer_supply int3472_aux2_consumer_supplies[] = {
> +	REGULATOR_SUPPLY("vdddo", "i2c-OVTI13B1:00"),
> +};

That's a lot of regulators. The sensor driver appears to use only three,
even after the second patch.

Is there a VCM there, for instance?

> +
>  static const struct regulator_init_data dell_7212_tps68470_core_reg_init_data = {
>  	.constraints = {
>  		.min_uV = 1200000,
> @@ -220,6 +248,82 @@ static const struct regulator_init_data dell_7212_tps68470_aux2_reg_init_data =
>  	.consumer_supplies = int3479_aux2_consumer_supplies,
>  };
>  
> +static const struct regulator_init_data intel_nvl_tps68470_core_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 1200000,
> +		.max_uV = 1200000,
> +		.apply_uV = true,
> +		.always_on = true,

Setting always_on to true shouldn't be necessary here.

> +	},
> +	.num_consumer_supplies = ARRAY_SIZE(int3472_core_consumer_supplies),
> +	.consumer_supplies = int3472_core_consumer_supplies,
> +};
> +
> +static const struct regulator_init_data intel_nvl_tps68470_ana_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 2815200,
> +		.max_uV = 2815200,
> +		.apply_uV = true,
> +		.always_on = true,
> +	},
> +	.num_consumer_supplies = ARRAY_SIZE(int3472_ana_consumer_supplies),
> +	.consumer_supplies = int3472_ana_consumer_supplies,
> +};
> +static const struct regulator_init_data intel_nvl_tps68470_vcm_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 2815200,
> +		.max_uV = 2815200,
> +		.apply_uV = true,
> +		.always_on = true,
> +	},
> +	.num_consumer_supplies = ARRAY_SIZE(int3472_vcm_consumer_supplies),
> +	.consumer_supplies = int3472_vcm_consumer_supplies,
> +};
> +
> +/* Ensure the always-on VIO regulator has the same voltage as VSIO */
> +static const struct regulator_init_data intel_nvl_tps68470_vio_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 1800600,
> +		.max_uV = 1800600,
> +		.apply_uV = true,
> +		.always_on = true,
> +	},
> +};
> +
> +static const struct regulator_init_data intel_nvl_tps68470_vsio_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 1800600,
> +		.max_uV = 1800600,
> +		.apply_uV = true,
> +		.always_on = true,
> +	},
> +	.num_consumer_supplies = ARRAY_SIZE(int3472_vsio_consumer_supplies),
> +	.consumer_supplies = int3472_vsio_consumer_supplies,
> +};
> +
> +static const struct regulator_init_data intel_nvl_tps68470_aux1_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 2815200,
> +		.max_uV = 2815200,
> +		.apply_uV = 1,
> +		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
> +	},
> +	.num_consumer_supplies = ARRAY_SIZE(int3472_aux1_consumer_supplies),
> +	.consumer_supplies = int3472_aux1_consumer_supplies,
> +};
> +
> +static const struct regulator_init_data intel_nvl_tps68470_aux2_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 1800600,
> +		.max_uV = 1800600,
> +		.apply_uV = 1,
> +		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
> +	},
> +	.num_consumer_supplies = ARRAY_SIZE(int3472_aux2_consumer_supplies),
> +	.consumer_supplies = int3472_aux2_consumer_supplies,
> +};
> +
> +
>  static const struct tps68470_regulator_platform_data dell_7212_tps68470_pdata = {
>  	.reg_init_data = {
>  		[TPS68470_CORE] = &dell_7212_tps68470_core_reg_init_data,
> @@ -232,6 +336,18 @@ static const struct tps68470_regulator_platform_data dell_7212_tps68470_pdata =
>  	},
>  };
>  
> +static const struct tps68470_regulator_platform_data intel_nvl_tps68470_pdata = {
> +	.reg_init_data = {
> +		[TPS68470_CORE] = &intel_nvl_tps68470_core_reg_init_data,
> +		[TPS68470_ANA]  = &intel_nvl_tps68470_ana_reg_init_data,
> +		[TPS68470_VCM]  = &intel_nvl_tps68470_vcm_reg_init_data,
> +		[TPS68470_VIO] = &intel_nvl_tps68470_vio_reg_init_data,
> +		[TPS68470_VSIO] = &intel_nvl_tps68470_vsio_reg_init_data,
> +		[TPS68470_AUX1] = &intel_nvl_tps68470_aux1_reg_init_data,
> +		[TPS68470_AUX2] = &intel_nvl_tps68470_aux2_reg_init_data,
> +	},
> +};
> +
>  static struct gpiod_lookup_table surface_go_int347a_gpios = {
>  	.dev_id = "i2c-INT347A:00",
>  	.table = {
> @@ -258,6 +374,23 @@ static struct gpiod_lookup_table dell_7212_int3479_gpios = {
>  	}
>  };
>  
> +static struct gpiod_lookup_table intel_nvl_int347a_gpios = {
> +	.dev_id = "i2c-OVTI13B1:01",
> +	.table = {
> +		GPIO_LOOKUP("tps68470-gpio", 9, "reset", GPIO_ACTIVE_LOW),
> +		GPIO_LOOKUP("tps68470-gpio", 8, "s_idle", GPIO_ACTIVE_LOW),
> +		{ }
> +	}
> +};
> +
> +static struct gpiod_lookup_table intel_nvl_int347e_gpios = {
> +	.dev_id = "i2c-OVTI13B1:01",
> +	.table = {
> +	GPIO_LOOKUP("tps68470-gpio", 7, "s_enable", GPIO_ACTIVE_LOW),
> +		{ }
> +	}
> +};
> +
>  static const struct int3472_tps68470_board_data surface_go_tps68470_board_data = {
>  	.dev_name = "i2c-INT3472:05",
>  	.tps68470_regulator_pdata = &surface_go_tps68470_pdata,
> @@ -287,6 +420,16 @@ static const struct int3472_tps68470_board_data dell_7212_tps68470_board_data =
>  	},
>  };
>  
> +static const struct int3472_tps68470_board_data intel_nvl_tps68470_board_data = {
> +	.dev_name = "i2c-INT3472:04",
> +	.tps68470_regulator_pdata = &intel_nvl_tps68470_pdata,
> +	.n_gpiod_lookups = 2,
> +	.tps68470_gpio_lookup_tables = {
> +		&intel_nvl_int347a_gpios,
> +		&intel_nvl_int347e_gpios,
> +	},
> +};
> +
>  static const struct dmi_system_id int3472_tps68470_board_data_table[] = {
>  	{
>  		.matches = {
> @@ -316,6 +459,13 @@ static const struct dmi_system_id int3472_tps68470_board_data_table[] = {
>  		},
>  		.driver_data = (void *)&dell_7212_tps68470_board_data,
>  	},
> +	{
> +		.matches = {
> +			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
> +			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Nova Lake Client Platform"),
> +		},
> +	       .driver_data = (void *)&intel_nvl_tps68470_board_data,
> +	},
>  	{ }
>  };
>  

-- 
Kind regards,

Sakari Ailus

  reply	other threads:[~2026-03-01 14:37 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-30  9:24 [PATCH " Arun T
2026-01-30  9:24 ` [PATCH 2/2] media: i2c: ov13b10: Support tps68470 regulator and gpio Arun T
2026-02-02 15:11   ` johannes.goede
2026-02-17  6:11     ` T, Arun
2026-02-24 18:21       ` T, Arun
2026-02-11 15:39   ` [PATCH 1/2] platform/x86: int3472: Add board data for Intel nvl Arun T
2026-02-11 15:39     ` [PATCH 2/2] media: i2c: ov13b10: Support tps68470 regulator and gpio Arun T
2026-02-11 16:16   ` [PATCH 1/2] platform/x86: int3472: Add board data for Intel nvl Arun T
2026-02-11 16:16     ` [PATCH 2/2] media: i2c: ov13b10: Support tps68470 regulator and gpio Arun T
2026-02-26  1:12   ` [PATCH 1/2] platform/x86: int3472: Add board data for Intel nvl Arun T
2026-02-26  1:12     ` [PATCH 2/2] media: i2c: ov13b10: Support tps68470 regulator and gpio Arun T
2026-02-26 11:15     ` [PATCH 1/2] platform/x86: int3472: Add board data for Intel nvl Kieran Bingham
2026-02-27 13:35   ` [PATCH v2 0/2] Add TPS68470 power supply support for ov13b10 sensor Arun T
2026-02-27 13:35     ` [PATCH v2 1/2] platform/x86: int3472: Add board data for Intel nvl Arun T
2026-03-01 14:37       ` Sakari Ailus [this message]
2026-03-04  9:29         ` johannes.goede
2026-03-06  8:47           ` T, Arun
2026-03-06  9:22             ` johannes.goede
2026-03-12  9:46               ` T, Arun
2026-03-16 17:57                 ` T, Arun
2026-02-27 13:35     ` [PATCH v2 2/2] media: i2c: ov13b10: Support tps68470 regulator and gpio Arun T
2026-03-01 14:40       ` Sakari Ailus
2026-03-02 17:46   ` [PATCH v3 0/2] Add TPS68470 power supply support for ov13b10 sensor Arun T
2026-03-02 17:46     ` [PATCH v3 1/2] platform/x86: int3472: Add TPS68470 board data for Intel nvl Arun T
2026-03-04  9:32       ` johannes.goede
2026-03-02 17:46     ` [PATCH v3 2/2] media: i2c: ov13b10: support tps68470 regulator and gpio Arun T
2026-02-02 15:10 ` [PATCH 1/2] platform/x86: int3472: Add board data for Intel nvl johannes.goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aaRPMtWnX7nWShmv@valkosipuli.retiisi.eu \
    --to=sakari.ailus@iki.fi \
    --cc=arun.t@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mehdi.djait@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®