Re: [PATCH 2/3] arm64: dts: qcom: qcs8300: add Display Serial Interface device nodes

[Ayushi Makhija <quic_amakhija@quicinc.com>]

On 9/26/2025 3:32 AM, Dmitry Baryshkov wrote:
> On Thu, Sep 25, 2025 at 11:06:01AM +0530, Ayushi Makhija wrote:
>> Add device tree nodes for the DSI0 controller with their corresponding
>> PHY found on Qualcomm QCS8300 SoC.
>>
>> Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
>> ---
>>  arch/arm64/boot/dts/qcom/qcs8300.dtsi | 95 ++++++++++++++++++++++++++-
>>  1 file changed, 94 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
>> index e0e1f63fc45b..834ae0522f2f 100644
>> --- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
>> @@ -3,6 +3,7 @@
>>   * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
>>   */
>>  
>> +#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
>>  #include <dt-bindings/clock/qcom,qcs8300-gcc.h>
>>  #include <dt-bindings/clock/qcom,rpmh.h>
>>  #include <dt-bindings/clock/qcom,sa8775p-camcc.h>
>> @@ -4854,6 +4855,13 @@ dpu_intf0_out: endpoint {
>>  							remote-endpoint = <&mdss_dp0_in>;
>>  						};
>>  					};
>> +
>> +					port@1 {
>> +						reg = <1>;
>> +						dpu_intf1_out: endpoint {
>> +							remote-endpoint = <&mdss_dsi0_in>;
>> +						};
>> +					};
>>  				};
>>  
>>  				mdp_opp_table: opp-table {
>> @@ -4881,6 +4889,89 @@ opp-650000000 {
>>  				};
>>  			};
>>  
>> +			mdss_dsi0: dsi@ae94000 {
>> +				compatible =  "qcom,sa8775p-dsi-ctrl","qcom,mdss-dsi-ctrl";
> 
> qcom,qcs8300-dsi-ctrl. You might use three compatibles (qcs8300, sa8775p
> and the generic one), but there should be qcs8300 one.
> 

Hi Dmitry, 

If I am adding three compatible string for ctrl,

compatible = "qcom,qcs8300-dsi-ctrl",
             "qcom,sa8775p-dsi-ctrl",
             "qcom,mdss-dsi-ctrl";

while validating dt-binding and dtsi against dt-schema. I am getting below errors


/local/mnt/workspace/amakhija/linux_next/linux/arch/arm64/boot/dts/qcom/qcs8300-ride.dtb: dsi@ae94000: compatible: 'oneOf' conditional failed, one must be fixed:
        ['qcom,qcs8300-dsi-ctrl', 'qcom,sa8775p-dsi-ctrl', 'qcom,mdss-dsi-ctrl'] is too long
        'qcom,qcs8300-dsi-ctrl' is not one of ['qcom,dsi-ctrl-6g-qcm2290', 'qcom,mdss-dsi-ctrl']
        'qcom,mdss-dsi-ctrl' was expected
        from schema $id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml#

According to the dsi-controller-main.yaml schema only two strings are allowed one is the SOC specific and other one is generic "qcom,mdss-dsi-ctrl".

Shall I keep only two strings qcom,qcs8300-mdss.yaml and the generic one "qcom,mdss-dsi-ctrl" or if we want to support 3 strings in compatible sting we need to modify the dsi-controller-main.yaml ?

Similarly, I am getting error for dsi_phy compatible string only one SOC specific compatible string is allow.

Thanks,
Ayushi