From: "Nai Xia" <nai.xia@gmail.com>
To: "Roland Dreier" <rdreier@cisco.com>
Cc: "Kiyoshi Ueda" <k-ueda@ct.jp.nec.com>,
bzolnier@gmail.com, bbpetkov@yahoo.de, flo@rfc822.org,
linux-kernel@vger.kernel.org, jens.axboe@oracle.com,
j-nomura@ce.jp.nec.com, linux-ide@vger.kernel.org
Subject: Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
Date: Thu, 31 Jan 2008 15:49:47 +0800 [thread overview]
Message-ID: <ab418ea90801302349u945788jeed1f42021801dbf@mail.gmail.com> (raw)
In-Reply-To: <adamyqmafl3.fsf@cisco.com>
My dmesg relevant info is quite similar:
[ 6.875041] Freeing unused kernel memory: 320k freed
[ 8.143120] ide-cd: rq still having bio: dev hdc: type=2, flags=114c8
[ 8.144439]
[ 8.144439] sector 10824201199534213, nr/cnr 0/0
[ 8.144439] bio cf029280, biotail cf029280, buffer 00000000, data
00000000, len 158
[ 8.144439] cdb: 12 00 00 00 fe 00 00 00 00 00 00 00 00 00 00 00
[ 8.144439] backup: data_len=158 bi_size=158
[ 8.160756] ide-cd: rq still having bio: dev hdc: type=2, flags=114c8
[ 8.160756]
[ 8.160756] sector 2669858, nr/cnr 0/0
[ 8.160756] bio cf029300, biotail cf029300, buffer 00000000, data
00000000, len 158
[ 8.160756] cdb: 12 01 00 00 fe 00 00 00 00 00 00 00 00 00 00 00
[ 8.160756] backup: data_len=158 bi_size=158
[ 14.851101] eth0: link up
[ 27.121883] eth0: no IPv6 routers present
And by the way, Kiyoshi,
This can be reproduced in a typical setup vmware workstation 6.02 with
a vritual IDE cdrom,
in case you wanna catch that with your own eyes. :-)
Thanks for your trying hard to correct this annoying bug.
Best Regards,
Nai
On 1/31/08, Roland Dreier <rdreier@cisco.com> wrote:
> > Could you try the patch below and give me all boot messages again?
>
> Sure, no problem, see below for full log (I updated to the latest git,
> which seems to have some other unrelated problems with things timing
> out earlier in the boot, but it does get to the ide-cd init); here's
> the relevant looking debug info:
>
> [ 163.990058] ide-cd: rq still having bio: dev hda: type=2, flags=114c8
> [ 163.990060]
> [ 163.990061] sector 1987647, nr/cnr 0/0
> [ 163.990063] bio ffff8101c418c200, biotail ffff8101c418c200, buffer
> 0000000000000000, data 0000000000000000, len 158
> [ 163.990064] cdb: 12 00 00 00 fe 00 00 00 00 00 00 00 00 00 00 00
> [ 163.990069] backup: data_len=158 bi_size=158
> [ 163.994021] ide-cd: rq still having bio: dev hda: type=2, flags=114c8
> [ 163.994023]
> [ 163.994024] sector 1987647, nr/cnr 0/0
> [ 163.994025] bio ffff8101c418c200, biotail ffff8101c418c200, buffer
> 0000000000000000, data 0000000000000000, len 158
> [ 163.994027] cdb: 12 01 00 00 fe 00 00 00 00 00 00 00 00 00 00 00
> [ 163.994032] backup: data_len=158 bi_size=158
>
> > This patch displays debug messages against requests still having bio,
> > then tries to unlink all bios from the rq before the rq is completed.
> > So your system may be able to continue to work correctly
> > after displaying debug messages.
>
> By the way, even with your first debug patch, I had no problem using
> the box once it booted. I didn't try the CD-ROM but everything else
> seemed fine.
>
> Also, I saw the same issue on a different box (Dell SC1435 with
> serverworks IDE):
>
> [ 1.367648] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> [ 1.371649] ide: Assuming 33MHz system bus speed for PIO modes;
> override with idebus=xx
> [ 2.612417] SvrWks HT1000: IDE controller (0x1166:0x0214 rev 0x00) at
> PCI slot 0000:00:02.1
> [ 2.612439] SvrWks HT1000: not 100% native mode: will probe irqs
> later
> [ 2.616427] ide0: BM-DMA at 0x08c0-0x08c7, BIOS settings:
> hda:DMA, hdb:pio
> [ 2.623505] Probing IDE interface ide0...
> [ 4.037070] hda: PHILIPS DVD-ROM SDR089, ATAPI CD/DVD-ROM drive
> [ 4.041801] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> [ 4.058447] hda: UDMA/33 mode selected
> [ 4.061278] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> [ 4.632739] hda: ATAPI 24X DVD-ROM drive, 2048kB Cache
> ...
> [ 8.631615] ide-cd: rq still having bio: dev hda: type=2, flags=114c8
> [ 8.631615]
> [ 8.631615] sector 2867855, nr/cnr 0/0
> [ 8.631615] bio ffff81021fba3f40, biotail ffff81021fba3f40, buffer
> 0000000000000000, data 0000000000000000, len 158
> [ 8.631615] cdb: 12 00 00 00 fe 00 00 00 00 00 00 00 00 00 00 00
> [ 8.660505] ide-cd: rq still having bio: dev hda: type=2, flags=114c8
> [ 8.660505]
> [ 8.660505] sector 2867855, nr/cnr 0/0
> [ 8.660505] bio ffff81021fba3f40, biotail ffff81021fba3f40, buffer
> 0000000000000000, data 0000000000000000, len 62
> [ 8.660505] cdb: 12 00 00 00 fe 00 00 00 00 00 00 00 00 00 00 00
>
> Let me know if you'd like debug info from that too.
>
>
next prev parent reply other threads:[~2008-01-31 7:51 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-29 14:01 Nai Xia
2008-01-29 15:33 ` Florian Lohoff
2008-01-29 20:13 ` Kiyoshi Ueda
2008-01-29 22:22 ` Roland Dreier
2008-01-29 23:23 ` Kiyoshi Ueda
2008-01-29 23:58 ` Bartlomiej Zolnierkiewicz
2008-01-30 5:03 ` Borislav Petkov
2008-01-30 5:16 ` Borislav Petkov
2008-01-31 1:26 ` Kiyoshi Ueda
2008-01-31 2:34 ` Roland Dreier
2008-01-31 7:49 ` Nai Xia [this message]
2008-01-31 13:05 ` Jens Axboe
2008-01-31 14:53 ` Florian Lohoff
2008-01-31 15:04 ` Jens Axboe
2008-02-01 21:59 ` Bartlomiej Zolnierkiewicz
2008-01-31 17:04 ` Kiyoshi Ueda
2008-01-31 18:16 ` Jens Axboe
2008-01-31 20:35 ` Kiyoshi Ueda
2008-01-31 21:37 ` Borislav Petkov
2008-01-31 22:35 ` Kiyoshi Ueda
2008-02-01 7:51 ` Borislav Petkov
2008-02-01 17:39 ` Kiyoshi Ueda
2008-02-01 18:29 ` Borislav Petkov
2008-02-01 19:37 ` Kiyoshi Ueda
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ab418ea90801302349u945788jeed1f42021801dbf@mail.gmail.com \
--to=nai.xia@gmail.com \
--cc=bbpetkov@yahoo.de \
--cc=bzolnier@gmail.com \
--cc=flo@rfc822.org \
--cc=j-nomura@ce.jp.nec.com \
--cc=jens.axboe@oracle.com \
--cc=k-ueda@ct.jp.nec.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rdreier@cisco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®