* [PATCH v3 1/2] arm64: dts: realtek: Add oscillator for RTD129x [not found] <20191020153612.29889-1-afaerber@suse.de> @ 2019-10-20 15:36 ` Andreas Färber 2019-10-29 5:22 ` Andreas Färber 2019-10-20 15:36 ` [PATCH v3 2/2] arm64: dts: realtek: Add watchdog node " Andreas Färber 1 sibling, 1 reply; 4+ messages in thread From: Andreas Färber @ 2019-10-20 15:36 UTC (permalink / raw) To: linux-realtek-soc Cc: linux-arm-kernel, Andreas Färber, Rob Herring, Mark Rutland, devicetree, linux-kernel Add 27 MHz oscillator clock node. Signed-off-by: Andreas Färber <afaerber@suse.de> --- v3: New (from previously blocking clk patch series) arch/arm64/boot/dts/realtek/rtd129x.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm64/boot/dts/realtek/rtd129x.dtsi b/arch/arm64/boot/dts/realtek/rtd129x.dtsi index a26c375ee1bb..4fb16611159b 100644 --- a/arch/arm64/boot/dts/realtek/rtd129x.dtsi +++ b/arch/arm64/boot/dts/realtek/rtd129x.dtsi @@ -23,6 +23,13 @@ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; }; + osc27M: osc { + compatible = "fixed-clock"; + clock-frequency = <27000000>; + #clock-cells = <0>; + clock-output-names = "osc27M"; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; -- 2.16.4 ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v3 1/2] arm64: dts: realtek: Add oscillator for RTD129x 2019-10-20 15:36 ` [PATCH v3 1/2] arm64: dts: realtek: Add oscillator for RTD129x Andreas Färber @ 2019-10-29 5:22 ` Andreas Färber 0 siblings, 0 replies; 4+ messages in thread From: Andreas Färber @ 2019-10-29 5:22 UTC (permalink / raw) To: linux-realtek-soc Cc: Mark Rutland, devicetree, linux-kernel, Rob Herring, linux-arm-kernel Am 20.10.19 um 17:36 schrieb Andreas Färber: > Add 27 MHz oscillator clock node. > > Signed-off-by: Andreas Färber <afaerber@suse.de> > --- > v3: New (from previously blocking clk patch series) > > arch/arm64/boot/dts/realtek/rtd129x.dtsi | 7 +++++++ > 1 file changed, 7 insertions(+) Applied to linux-realtek.git v5.5/dt64: https://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek.git/log/?h=v5.5/dt64 Regards, Andreas -- SUSE Software Solutions Germany GmbH Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer HRB 36809 (AG Nürnberg) ^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v3 2/2] arm64: dts: realtek: Add watchdog node for RTD129x [not found] <20191020153612.29889-1-afaerber@suse.de> 2019-10-20 15:36 ` [PATCH v3 1/2] arm64: dts: realtek: Add oscillator for RTD129x Andreas Färber @ 2019-10-20 15:36 ` Andreas Färber 2019-10-29 5:23 ` Andreas Färber 1 sibling, 1 reply; 4+ messages in thread From: Andreas Färber @ 2019-10-20 15:36 UTC (permalink / raw) To: linux-realtek-soc Cc: linux-arm-kernel, Andreas Färber, Rob Herring, Mark Rutland, devicetree, linux-kernel Add the watchdog node to the RTD129x Device Tree. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net> [AF: Moved from RTD1295 to new RTD129x] Signed-off-by: Andreas Färber <afaerber@suse.de> --- v2 -> v3: * rtd129x.dtsi was factored out of rtd1295.dtsi, add it there v1 -> v2: Unchanged arch/arm64/boot/dts/realtek/rtd129x.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm64/boot/dts/realtek/rtd129x.dtsi b/arch/arm64/boot/dts/realtek/rtd129x.dtsi index 4fb16611159b..0b2ac0c33b8b 100644 --- a/arch/arm64/boot/dts/realtek/rtd129x.dtsi +++ b/arch/arm64/boot/dts/realtek/rtd129x.dtsi @@ -37,6 +37,12 @@ /* Exclude up to 2 GiB of RAM */ ranges = <0x80000000 0x80000000 0x80000000>; + wdt: watchdog@98007680 { + compatible = "realtek,rtd1295-watchdog"; + reg = <0x98007680 0x100>; + clocks = <&osc27M>; + }; + uart0: serial@98007800 { compatible = "snps,dw-apb-uart"; reg = <0x98007800 0x400>; -- 2.16.4 ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v3 2/2] arm64: dts: realtek: Add watchdog node for RTD129x 2019-10-20 15:36 ` [PATCH v3 2/2] arm64: dts: realtek: Add watchdog node " Andreas Färber @ 2019-10-29 5:23 ` Andreas Färber 0 siblings, 0 replies; 4+ messages in thread From: Andreas Färber @ 2019-10-29 5:23 UTC (permalink / raw) To: linux-realtek-soc Cc: Mark Rutland, devicetree, linux-kernel, Rob Herring, linux-arm-kernel Am 20.10.19 um 17:36 schrieb Andreas Färber: > Add the watchdog node to the RTD129x Device Tree. > > Acked-by: Rob Herring <robh@kernel.org> > Acked-by: Guenter Roeck <linux@roeck-us.net> > [AF: Moved from RTD1295 to new RTD129x] > Signed-off-by: Andreas Färber <afaerber@suse.de> > --- > v2 -> v3: > * rtd129x.dtsi was factored out of rtd1295.dtsi, add it there > > v1 -> v2: Unchanged > > arch/arm64/boot/dts/realtek/rtd129x.dtsi | 6 ++++++ > 1 file changed, 6 insertions(+) Applied to linux-realtek.git v5.5/dt64: https://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek.git/log/?h=v5.5/dt64 Regards, Andreas -- SUSE Software Solutions Germany GmbH Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer HRB 36809 (AG Nürnberg) ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-10-29 5:23 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20191020153612.29889-1-afaerber@suse.de>
2019-10-20 15:36 ` [PATCH v3 1/2] arm64: dts: realtek: Add oscillator for RTD129x Andreas Färber
2019-10-29 5:22 ` Andreas Färber
2019-10-20 15:36 ` [PATCH v3 2/2] arm64: dts: realtek: Add watchdog node " Andreas Färber
2019-10-29 5:23 ` Andreas Färber
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®