mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Joshua Clayton <stillcompiling@gmail.com>
To: Alessandro Zummo <a.zummo@towertech.it>,
	Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: rtc-linux@googlegroups.com, linux-kernel@vger.kernel.org,
	Joshua Clayton <stillcompiling@gmail.com>
Subject: [PATCH 1/9] rtc-pcf2123: Document all registers and useful bits
Date: Wed,  4 Nov 2015 07:36:32 -0800	[thread overview]
Message-ID: <ad6500ca32145d4f0b9cbfbc4b815d734e2da5e8.1446587705.git.stillcompiling@gmail.com> (raw)
In-Reply-To: <cover.1446587705.git.stillcompiling@gmail.com>
In-Reply-To: <cover.1446587705.git.stillcompiling@gmail.com>

Document all 16 registers in the pcf2123, as well as
useful bit masks from the Control1 and seconds registers

Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
---
 drivers/rtc/rtc-pcf2123.c | 23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-pcf2123.c b/drivers/rtc/rtc-pcf2123.c
index d1953bb..7756210 100644
--- a/drivers/rtc/rtc-pcf2123.c
+++ b/drivers/rtc/rtc-pcf2123.c
@@ -47,6 +47,7 @@
 
 #define DRV_VERSION "0.6"
 
+/* REGISTERS */
 #define PCF2123_REG_CTRL1	(0x00)	/* Control Register 1 */
 #define PCF2123_REG_CTRL2	(0x01)	/* Control Register 2 */
 #define PCF2123_REG_SC		(0x02)	/* datetime */
@@ -56,7 +57,27 @@
 #define PCF2123_REG_DW		(0x06)
 #define PCF2123_REG_MO		(0x07)
 #define PCF2123_REG_YR		(0x08)
-
+#define PCF2123_REG_ALRM_MN	(0x09)	/* Alarm Registers */
+#define PCF2123_REG_ALRM_HR	(0x0a)
+#define PCF2123_REG_ALRM_DM	(0x0b)
+#define PCF2123_REG_ALRM_DW	(0x0c)
+#define PCF2123_REG_OFFSET	(0x0d)	/* Clock Rate Offset Register */
+#define PCF2123_REG_TMR_CLKOUT	(0x0e)	/* Timer Registers */
+#define PCF2123_REG_CTDWN_TMR	(0x0f)
+#define PCF2123_REG_MAX		(PCF2123_REG_CTDWN_TMR)
+
+/* PCF2123_REG_CTRL1 BITS */
+#define CTRL1_CLEAR		(0x00)	/* Clear */
+#define CTRL1_CORRECTION_INT	(0x02)	/* Correction Interrupt */
+#define CTRL1_12_HOUR		(0x04)	/* 12 hour time */
+#define CTRL1_STOP		(0x20)	/* Stop the clock */
+#define CTRL1_SW_RESET		(0x58)	/* Software reset */
+#define CTRL1_EXT_TEST		(0x80)	/* External Clock Test mode */
+
+/* PCF2123_REG_SC BITS */
+#define OSC_HAS_STOPPED		(0x80)	/* Clock has been stopped */
+
+/* READ/WRITE ADDRESS BITS */
 #define PCF2123_SUBADDR		(1 << 4)
 #define PCF2123_WRITE		((0 << 7) | PCF2123_SUBADDR)
 #define PCF2123_READ		((1 << 7) | PCF2123_SUBADDR)
-- 
2.5.0


  reply	other threads:[~2015-11-04 15:37 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-04 15:36 [PATCH 0/9] rtc-2123: access the clock offset feature Joshua Clayton
2015-11-04 15:36 ` Joshua Clayton [this message]
2015-11-24 21:51   ` [PATCH 1/9] rtc-pcf2123: Document all registers and useful bits Alexandre Belloni
2015-12-01 18:13     ` Joshua Clayton
2015-11-04 15:36 ` [PATCH 2/9] rtc-pcf2123: clean up reads from the chip Joshua Clayton
2015-11-04 15:36 ` [PATCH 3/9] rtc-pcf2123: clean up writes to the rtc chip Joshua Clayton
2015-11-24 22:16   ` Alexandre Belloni
2015-12-01 18:19     ` Joshua Clayton
2015-11-04 15:36 ` [PATCH 4/9] rtc-pcf2123: replace magic numbers with defines Joshua Clayton
2015-11-04 15:36 ` [PATCH 5/9] rtc-pcf2123: put the chip reset into a function Joshua Clayton
2015-11-24 23:17   ` Alexandre Belloni
2015-12-01 18:22     ` Joshua Clayton
2015-11-04 15:36 ` [PATCH 6/9] rtc-pcf2123: avoid resetting the clock if possible Joshua Clayton
2015-11-24 23:25   ` Alexandre Belloni
2015-12-01 20:23     ` Joshua Clayton
2015-12-01 21:04       ` Alexandre Belloni
2015-11-04 15:36 ` [PATCH 7/9] rtc-pcf2123: allow sysfs to accept hexidecimal Joshua Clayton
2015-11-04 15:36 ` [PATCH 8/9] rtc-pcf2123: use sysfs groups Joshua Clayton
2015-11-18 23:52   ` Joshua Clayton
2015-11-24 23:31   ` Alexandre Belloni
2015-12-01 20:28     ` Joshua Clayton
2015-12-01 20:47       ` Alexandre Belloni
2015-11-04 15:36 ` [PATCH 9/9] rtc-pcf2123: adjust the clock rate via sysfs Joshua Clayton
2015-11-18 23:51   ` Joshua Clayton
2015-11-17 15:30 ` [PATCH 0/9] rtc-2123: access the clock offset feature Joshua Clayton
2015-11-17 16:25   ` Alexandre Belloni
2015-11-19  0:25     ` Joshua Clayton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ad6500ca32145d4f0b9cbfbc4b815d734e2da5e8.1446587705.git.stillcompiling@gmail.com \
    --to=stillcompiling@gmail.com \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@free-electrons.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rtc-linux@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome