From: Joshua Clayton <stillcompiling@gmail.com>
To: Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: rtc-linux@googlegroups.com, linux-kernel@vger.kernel.org,
Joshua Clayton <stillcompiling@gmail.com>
Subject: [PATCH 4/9] rtc-pcf2123: replace magic numbers with defines
Date: Wed, 4 Nov 2015 07:36:35 -0800 [thread overview]
Message-ID: <e239e183b907e072b2360a138f52fbdc201e1997.1446587705.git.stillcompiling@gmail.com> (raw)
In-Reply-To: <cover.1446587705.git.stillcompiling@gmail.com>
In-Reply-To: <cover.1446587705.git.stillcompiling@gmail.com>
All of the magic numbers pertain to register CTRL1.
document all the values in CTRL1 with defines from the datasheet
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
---
drivers/rtc/rtc-pcf2123.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/rtc/rtc-pcf2123.c b/drivers/rtc/rtc-pcf2123.c
index 3acb2c8..257ce7d 100644
--- a/drivers/rtc/rtc-pcf2123.c
+++ b/drivers/rtc/rtc-pcf2123.c
@@ -234,7 +234,7 @@ static int pcf2123_rtc_set_time(struct device *dev, struct rtc_time *tm)
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
/* Stop the counter first */
- ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, 0x20);
+ ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_STOP);
if (ret < 0)
return ret;
@@ -253,7 +253,7 @@ static int pcf2123_rtc_set_time(struct device *dev, struct rtc_time *tm)
return ret;
/* Start the counter */
- ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, 0x00);
+ ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_CLEAR);
if (ret < 0)
return ret;
@@ -280,13 +280,13 @@ static int pcf2123_probe(struct spi_device *spi)
/* Send a software reset command */
dev_dbg(&spi->dev, "resetting RTC\n");
- ret = pcf2123_write_reg(&spi->dev, PCF2123_REG_CTRL1, 0x58);
+ ret = pcf2123_write_reg(&spi->dev, PCF2123_REG_CTRL1, CTRL1_SW_RESET);
if (ret < 0)
goto kfree_exit;
/* Stop the counter */
dev_dbg(&spi->dev, "stopping RTC\n");
- ret = pcf2123_write_reg(&spi->dev, PCF2123_REG_CTRL1, 0x20);
+ ret = pcf2123_write_reg(&spi->dev, PCF2123_REG_CTRL1, CTRL1_STOP);
if (ret < 0)
goto kfree_exit;
@@ -298,7 +298,7 @@ static int pcf2123_probe(struct spi_device *spi)
if (ret < 0)
goto kfree_exit;
- if (!(rxbuf[0] & 0x20)) {
+ if (!(rxbuf[0] & CTRL1_STOP)) {
dev_err(&spi->dev, "chip not found\n");
ret = -ENODEV;
goto kfree_exit;
@@ -309,7 +309,7 @@ static int pcf2123_probe(struct spi_device *spi)
(spi->max_speed_hz + 500) / 1000);
/* Start the counter */
- ret = pcf2123_write_reg(&spi->dev, PCF2123_REG_CTRL1, 0x00);
+ ret = pcf2123_write_reg(&spi->dev, PCF2123_REG_CTRL1, CTRL1_CLEAR);
if (ret < 0)
goto kfree_exit;
--
2.5.0
next prev parent reply other threads:[~2015-11-04 15:39 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-04 15:36 [PATCH 0/9] rtc-2123: access the clock offset feature Joshua Clayton
2015-11-04 15:36 ` [PATCH 1/9] rtc-pcf2123: Document all registers and useful bits Joshua Clayton
2015-11-24 21:51 ` Alexandre Belloni
2015-12-01 18:13 ` Joshua Clayton
2015-11-04 15:36 ` [PATCH 2/9] rtc-pcf2123: clean up reads from the chip Joshua Clayton
2015-11-04 15:36 ` [PATCH 3/9] rtc-pcf2123: clean up writes to the rtc chip Joshua Clayton
2015-11-24 22:16 ` Alexandre Belloni
2015-12-01 18:19 ` Joshua Clayton
2015-11-04 15:36 ` Joshua Clayton [this message]
2015-11-04 15:36 ` [PATCH 5/9] rtc-pcf2123: put the chip reset into a function Joshua Clayton
2015-11-24 23:17 ` Alexandre Belloni
2015-12-01 18:22 ` Joshua Clayton
2015-11-04 15:36 ` [PATCH 6/9] rtc-pcf2123: avoid resetting the clock if possible Joshua Clayton
2015-11-24 23:25 ` Alexandre Belloni
2015-12-01 20:23 ` Joshua Clayton
2015-12-01 21:04 ` Alexandre Belloni
2015-11-04 15:36 ` [PATCH 7/9] rtc-pcf2123: allow sysfs to accept hexidecimal Joshua Clayton
2015-11-04 15:36 ` [PATCH 8/9] rtc-pcf2123: use sysfs groups Joshua Clayton
2015-11-18 23:52 ` Joshua Clayton
2015-11-24 23:31 ` Alexandre Belloni
2015-12-01 20:28 ` Joshua Clayton
2015-12-01 20:47 ` Alexandre Belloni
2015-11-04 15:36 ` [PATCH 9/9] rtc-pcf2123: adjust the clock rate via sysfs Joshua Clayton
2015-11-18 23:51 ` Joshua Clayton
2015-11-17 15:30 ` [PATCH 0/9] rtc-2123: access the clock offset feature Joshua Clayton
2015-11-17 16:25 ` Alexandre Belloni
2015-11-19 0:25 ` Joshua Clayton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e239e183b907e072b2360a138f52fbdc201e1997.1446587705.git.stillcompiling@gmail.com \
--to=stillcompiling@gmail.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@free-electrons.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rtc-linux@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome