From: Waiman Long <llong@redhat.com>
To: Al Viro <viro@zeniv.linux.org.uk>,
Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Moore <paul@paul-moore.com>, Eric Paris <eparis@redhat.com>,
Christian Brauner <brauner@kernel.org>,
linux-kernel@vger.kernel.org, audit@vger.kernel.org,
Richard Guy Briggs <rgb@redhat.com>,
Ricardo Robaina <rrobaina@redhat.com>,
Waiman Long <llong@redhat.com>
Subject: Re: [PATCH][RFC] bug in unshare(2) failure recovery
Date: Sat, 7 Feb 2026 18:06:24 -0500 [thread overview]
Message-ID: <ae3c26ae-1c3f-4a83-935d-1c9c984a55a7@redhat.com> (raw)
In-Reply-To: <20260207082524.GE3183987@ZenIV>
On 2/7/26 3:25 AM, Al Viro wrote:
> On Fri, Feb 06, 2026 at 03:04:53PM -0500, Waiman Long wrote:
>
> [summary of subthread: there's an unpleasant corner case in unshare(2),
> when we have a CLONE_NEWNS in flags and current->fs hadn't been shared
> at all; in that case copy_mnt_ns() gets passed current->fs instead of
> a private copy, which causes interesting warts in proof of correctness]
>
>> I guess if private means fs->users == 1, the condition could still be true.
> Unfortunately, it's worse than just a convoluted proof of correctness.
> Consider the case when we have CLONE_NEWCGROUP in addition to CLONE_NEWNS
> (and current->fs->users == 1).
>
> We pass current->fs to copy_mnt_ns(), all right. Suppose it succeeds and
> flips current->fs->{pwd,root} to corresponding locations in the new namespace.
> Now we proceed to copy_cgroup_ns(), which fails (e.g. with -ENOMEM).
> We call put_mnt_ns() on the namespace created by copy_mnt_ns(), it's
> destroyed and its mount tree is dissolved, but... current->fs->root and
> current->fs->pwd are both left pointing to now detached mounts.
>
> They are pinning those, so it's not a UAF, but it leaves the calling
> process with unshare(2) failing with -ENOMEM _and_ leaving it with
> pwd and root on detached isolated mounts. The last part is clearly a bug.
>
> There is other fun related to that mess (races with pivot_root(), including
> the one between pivot_root() and fork(), of all things), but this one
> is easy to isolate and fix - treat CLONE_NEWNS as "allocate a new
> fs_struct even if it hadn't been shared in the first place". Sure, we could
> go for something like "if both CLONE_NEWNS *and* one of the things that might
> end up failing after copy_mnt_ns() call in create_new_namespaces() are set,
> force allocation of new fs_struct", but let's keep it simple - the cost
> of copy_fs_struct() is trivial.
>
> Another benefit is that copy_mnt_ns() with CLONE_NEWNS *always* gets
> a freshly allocated fs_struct, yet to be attached to anything. That
> seriously simplifies the analysis...
>
> FWIW, that bug had been there since the introduction of unshare(2) ;-/
>
> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
> ---
> diff --git a/kernel/fork.c b/kernel/fork.c
> index b1f3915d5f8e..68ccbaea7398 100644
> --- a/kernel/fork.c
> +++ b/kernel/fork.c
> @@ -3082,7 +3082,7 @@ static int unshare_fs(unsigned long unshare_flags, struct fs_struct **new_fsp)
> return 0;
>
> /* don't need lock here; in the worst case we'll do useless copy */
> - if (fs->users == 1)
> + if (!(unshare_flags & CLONE_NEWNS) && fs->users == 1)
> return 0;
>
> *new_fsp = copy_fs_struct(fs);
>
After booting up a vanilla 6.19.0-rc8 kernel, I found that copy_mnt_ns()
was called 13 times during the bootup process with current->fs passed
down to it. After applying this patch, the count dropped to 0.
Tested-by: Waiman Long <longman@redhat.com>
next prev parent reply other threads:[~2026-02-07 23:06 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-03 19:44 [PATCH v2] audit: Avoid excessive dput/dget in audit_context setup and reset paths Waiman Long
2026-02-03 19:59 ` Al Viro
2026-02-03 20:18 ` Waiman Long
2026-02-03 20:05 ` Al Viro
2026-02-03 20:32 ` Waiman Long
2026-02-03 21:50 ` Al Viro
2026-02-03 23:26 ` Al Viro
2026-02-04 4:21 ` Waiman Long
2026-02-04 6:26 ` Al Viro
2026-02-04 18:16 ` Waiman Long
2026-02-04 20:18 ` Al Viro
2026-02-05 3:03 ` Waiman Long
2026-02-05 4:45 ` Waiman Long
2026-02-05 23:53 ` Al Viro
2026-02-06 1:20 ` Waiman Long
2026-02-06 4:11 ` Waiman Long
2026-02-06 4:19 ` Waiman Long
2026-02-06 5:22 ` Al Viro
2026-02-06 6:31 ` Al Viro
2026-02-06 6:38 ` Al Viro
2026-02-06 7:13 ` Al Viro
2026-02-06 19:16 ` Waiman Long
2026-02-06 20:04 ` Waiman Long
2026-02-06 20:38 ` Al Viro
2026-02-07 8:25 ` [PATCH][RFC] bug in unshare(2) failure recovery Al Viro
2026-02-07 23:06 ` Waiman Long [this message]
2026-02-17 12:49 ` Christian Brauner
2026-02-17 12:49 ` Christian Brauner
2026-02-06 20:29 ` [PATCH v2] audit: Avoid excessive dput/dget in audit_context setup and reset paths Al Viro
2026-02-06 20:58 ` setns(2) vs. pivot_root(2) (was Re: [PATCH v2] audit: Avoid excessive dput/dget in audit_context setup and reset paths) Al Viro
2026-02-06 21:09 ` Al Viro
2026-02-17 13:12 ` Christian Brauner
2026-02-06 8:15 ` [PATCH v2] audit: Avoid excessive dput/dget in audit_context setup and reset paths Al Viro
2026-02-05 5:22 ` Al Viro
2026-02-05 13:59 ` Waiman Long
2026-02-05 17:53 ` Mateusz Guzik
2026-02-17 13:33 ` Christian Brauner
2026-02-17 13:44 ` Mateusz Guzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ae3c26ae-1c3f-4a83-935d-1c9c984a55a7@redhat.com \
--to=llong@redhat.com \
--cc=audit@vger.kernel.org \
--cc=brauner@kernel.org \
--cc=eparis@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=paul@paul-moore.com \
--cc=rgb@redhat.com \
--cc=rrobaina@redhat.com \
--cc=torvalds@linux-foundation.org \
--cc=viro@zeniv.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®