* [PATCH v5 1/1] USB: serial: option: add missing RSVD(5) flag for Rolling RW135R-GL
@ 2026-05-20 11:32 zwq2226404116
2026-05-21 7:58 ` Johan Hovold
0 siblings, 1 reply; 2+ messages in thread
From: zwq2226404116 @ 2026-05-20 11:32 UTC (permalink / raw)
To: johan, gregkh
Cc: linux-usb, linux-kernel, zwq2226404116, Wanquan Zhong, stable
From: Wanquan Zhong <wanquan.zhong@fibocom.com>
The RW135R-GL entry added in commit 01e8d0f74222 ("USB: serial: option:
add support for Rolling Wireless RW135R-GL") was missing the
.driver_info = RSVD(5) flag used by other Rolling Wireless MBIM laptop
modules (e.g. RW135-GL and RW350-GL).
Without this flag, the option driver incorrectly binds to the reserved
ADB interface (If#5) in multi-interface USB modes, causing AT/MBIM
communication failures after mode switching. This matches the handling
of other Rolling Wireless MBIM devices.
- VID:PID 33f8:1003, RW135R-GL for laptop debug M.2 cards (with MBIM
interface for Linux/Chrome OS)
0x1003: mbim, diag, AT, pipe
Here are the outputs of usb-devices:
T: Bus=03 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=33f8 ProdID=1003 Rev= 5.15
S: Manufacturer=Rolling Wireless S.a.r.l.
S: Product=Rolling RW135R-GL Module
S: SerialNumber=12345678
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
- VID:PID 33f8:1003, RW135R-GL for laptop debug M.2 cards (with MBIM
interface for Linux/Chrome OS)
0x1003: mbim, diag, AT, ADB, pipe
Here are the outputs of usb-devices:
T: Bus=03 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=33f8 ProdID=1003 Rev= 5.15
S: Manufacturer=Rolling Wireless S.a.r.l.
S: Product=Rolling RW135R-GL Module
S: SerialNumber=12345678
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
- VID:PID 33f8:1003, RW135R-GL for laptop debug M.2 cards (with MBIM
interface for Linux/Chrome OS)
0x1003: mbim, pipe
Here are the outputs of usb-devices:
T: Bus=03 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 9 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=33f8 ProdID=1003 Rev= 5.15
S: Manufacturer=Rolling Wireless S.a.r.l.
S: Product=Rolling RW135R-GL Module
S: SerialNumber=12345678
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Fixes: 01e8d0f74222 ("USB: serial: option: add support for Rolling Wireless RW135R-GL")
Signed-off-by: Wanquan Zhong <wanquan.zhong@fibocom.com>
Cc: stable@vger.kernel.org
---
v4 -> v5: Use 12-char commit id and correct Fixes tag summary; move
changelog below --- separator; restore usb-devices output
v3 -> v4: Device table entry formatting aligned with existing pattern
---
drivers/usb/serial/option.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index c71461893d20..dfec7467b36c 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2466,7 +2466,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x0302, 0xff) }, /* Rolling RW101R-GL (laptop MBIM) */
{ USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x0802, 0xff), /* Rolling RW350-GL (laptop MBIM) */
.driver_info = RSVD(5) },
- { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x1003, 0xff) }, /* Rolling RW135R-GL (laptop MBIM) */
+ { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x1003, 0xff), /* Rolling RW135R-GL (laptop MBIM) */
+ .driver_info = RSVD(5) },
{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0100, 0xff, 0xff, 0x30) }, /* NetPrisma LCUK54-WWD for Global */
{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0100, 0xff, 0x00, 0x40) },
{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0100, 0xff, 0xff, 0x40) },
--
2.43.0
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH v5 1/1] USB: serial: option: add missing RSVD(5) flag for Rolling RW135R-GL
2026-05-20 11:32 [PATCH v5 1/1] USB: serial: option: add missing RSVD(5) flag for Rolling RW135R-GL zwq2226404116
@ 2026-05-21 7:58 ` Johan Hovold
0 siblings, 0 replies; 2+ messages in thread
From: Johan Hovold @ 2026-05-21 7:58 UTC (permalink / raw)
To: zwq2226404116; +Cc: gregkh, linux-usb, linux-kernel, Wanquan Zhong, stable
On Wed, May 20, 2026 at 07:32:45PM +0800, zwq2226404116@163.com wrote:
> From: Wanquan Zhong <wanquan.zhong@fibocom.com>
>
> The RW135R-GL entry added in commit 01e8d0f74222 ("USB: serial: option:
> add support for Rolling Wireless RW135R-GL") was missing the
> .driver_info = RSVD(5) flag used by other Rolling Wireless MBIM laptop
> modules (e.g. RW135-GL and RW350-GL).
>
> Without this flag, the option driver incorrectly binds to the reserved
> ADB interface (If#5) in multi-interface USB modes, causing AT/MBIM
> communication failures after mode switching. This matches the handling
> of other Rolling Wireless MBIM devices.
> Fixes: 01e8d0f74222 ("USB: serial: option: add support for Rolling Wireless RW135R-GL")
> Signed-off-by: Wanquan Zhong <wanquan.zhong@fibocom.com>
> Cc: stable@vger.kernel.org
> ---
> v4 -> v5: Use 12-char commit id and correct Fixes tag summary; move
> changelog below --- separator; restore usb-devices output
> v3 -> v4: Device table entry formatting aligned with existing pattern
Thanks for the update. Now applied.
Johan
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-05-21 7:58 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-05-20 11:32 [PATCH v5 1/1] USB: serial: option: add missing RSVD(5) flag for Rolling RW135R-GL zwq2226404116
2026-05-21 7:58 ` Johan Hovold
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome