From: Frank Li <Frank.li@nxp.com>
To: Adrian Hunter <adrian.hunter@intel.com>
Cc: alexandre.belloni@bootlin.com, linux-i3c@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH V3 10/16] i3c: mipi-i3c-hci: Add DMA ring abort quirk for Intel controllers
Date: Tue, 12 May 2026 13:01:34 -0400 [thread overview]
Message-ID: <agNc7oxOJORb0qwW@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20260504113352.38490-11-adrian.hunter@intel.com>
On Mon, May 04, 2026 at 02:33:46PM +0300, Adrian Hunter wrote:
> DMA rings can be aborted either per-ring via RING_CONTROL or globally
> via HC_CONTROL_ABORT. The driver currently relies on the per-ring
> mechanism.
>
> Some Intel I3C HCI controllers require HC_CONTROL_ABORT to be asserted
> before a DMA ring abort is effective. This behavior is non-standard.
> Introduce a controller quirk to select the required abort method and
> enable it for Intel LPSS I3C controllers.
>
> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
> ---
>
>
> Changes in V2 and V3:
>
> None
>
>
> drivers/i3c/master/mipi-i3c-hci/core.c | 18 +++++++++++++++--
> drivers/i3c/master/mipi-i3c-hci/dma.c | 27 +++++++++++++++++++++++---
> drivers/i3c/master/mipi-i3c-hci/hci.h | 2 ++
> 3 files changed, 42 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/i3c/master/mipi-i3c-hci/core.c b/drivers/i3c/master/mipi-i3c-hci/core.c
> index 770235ad6b25..8274c84b16be 100644
> --- a/drivers/i3c/master/mipi-i3c-hci/core.c
> +++ b/drivers/i3c/master/mipi-i3c-hci/core.c
> @@ -231,7 +231,20 @@ static void i3c_hci_bus_cleanup(struct i3c_master_controller *m)
>
> void mipi_i3c_hci_resume(struct i3c_hci *hci)
> {
> - reg_set(HC_CONTROL, HC_CONTROL_RESUME);
> + u32 reg = reg_read(HC_CONTROL);
> +
> + reg |= HC_CONTROL_RESUME;
> + reg &= ~HC_CONTROL_ABORT;
> + reg_write(HC_CONTROL, reg);
> +}
> +
> +void mipi_i3c_hci_abort(struct i3c_hci *hci)
> +{
> + u32 reg = reg_read(HC_CONTROL);
> +
> + reg &= ~HC_CONTROL_RESUME; /* Do not set resume */
> + reg |= HC_CONTROL_ABORT;
> + reg_write(HC_CONTROL, reg);
> }
>
> /* located here rather than pio.c because needed bits are in core reg space */
> @@ -1053,7 +1066,8 @@ static const struct platform_device_id i3c_hci_driver_ids[] = {
> { .name = "intel-lpss-i3c", HCI_QUIRK_RPM_ALLOWED |
> HCI_QUIRK_RPM_IBI_ALLOWED |
> HCI_QUIRK_RPM_PARENT_MANAGED |
> - HCI_QUIRK_DMA_ABORT_REQUIRES_PIO_RESET },
> + HCI_QUIRK_DMA_ABORT_REQUIRES_PIO_RESET |
> + HCI_QUIRK_DMA_REQUIRES_HC_ABORT },
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(platform, i3c_hci_driver_ids);
> diff --git a/drivers/i3c/master/mipi-i3c-hci/dma.c b/drivers/i3c/master/mipi-i3c-hci/dma.c
> index 699c6d523eed..41bbd912df7f 100644
> --- a/drivers/i3c/master/mipi-i3c-hci/dma.c
> +++ b/drivers/i3c/master/mipi-i3c-hci/dma.c
> @@ -597,6 +597,29 @@ static void hci_dma_xfer_done(struct i3c_hci *hci, struct hci_rh_data *rh)
> rh_reg_write(RING_OPERATION1, op1_val);
> }
>
> +static bool hci_dma_requires_hc_abort_quirk(struct i3c_hci *hci, struct hci_rh_data *rh)
> +{
> + if (!(hci->quirks & HCI_QUIRK_DMA_REQUIRES_HC_ABORT))
> + return false;
> +
> + reinit_completion(&rh->op_done);
> + mipi_i3c_hci_abort(hci);
> + wait_for_completion_timeout(&rh->op_done, HZ);
> + rh_reg_write(RING_CONTROL, rh_reg_read(RING_CONTROL) | RING_CTRL_ABORT);
> +
> + return true;
> +}
> +
> +static void hci_dma_abort(struct i3c_hci *hci, struct hci_rh_data *rh)
> +{
> + if (hci_dma_requires_hc_abort_quirk(hci, rh))
> + return;
Move check logic here to make overall logic simple
if (hci->quirks & HCI_QUIRK_DMA_REQUIRES_HC_ABORT) {
hci_dma_requires_hc_abort_quirk()
return;
}
> +
> + reinit_completion(&rh->op_done);
> + rh_reg_write(RING_CONTROL, rh_reg_read(RING_CONTROL) | RING_CTRL_ABORT);
> + wait_for_completion_timeout(&rh->op_done, HZ);
move these codes reorg into new patch.
Frank
> +}
> +
> static void hci_dma_abort_requires_pio_reset_quirk(struct i3c_hci *hci, struct hci_rh_data *rh)
> {
> if ((hci->quirks & HCI_QUIRK_DMA_ABORT_REQUIRES_PIO_RESET) &&
> @@ -630,9 +653,7 @@ static bool hci_dma_dequeue_xfer(struct i3c_hci *hci,
> hci->enqueue_blocked = true;
> spin_unlock_irq(&hci->lock);
> /* stop the ring */
> - reinit_completion(&rh->op_done);
> - rh_reg_write(RING_CONTROL, rh_reg_read(RING_CONTROL) | RING_CTRL_ABORT);
> - wait_for_completion_timeout(&rh->op_done, HZ);
> + hci_dma_abort(hci, rh);
> spin_lock_irq(&hci->lock);
> ring_status = rh_reg_read(RING_STATUS);
> if (ring_status & RING_STATUS_RUNNING) {
> diff --git a/drivers/i3c/master/mipi-i3c-hci/hci.h b/drivers/i3c/master/mipi-i3c-hci/hci.h
> index 01237b12d32e..97c31a315a6e 100644
> --- a/drivers/i3c/master/mipi-i3c-hci/hci.h
> +++ b/drivers/i3c/master/mipi-i3c-hci/hci.h
> @@ -157,9 +157,11 @@ struct i3c_hci_dev_data {
> #define HCI_QUIRK_RPM_IBI_ALLOWED BIT(6) /* IBI and Hot-Join allowed while runtime suspended */
> #define HCI_QUIRK_RPM_PARENT_MANAGED BIT(7) /* Runtime PM managed by parent device */
> #define HCI_QUIRK_DMA_ABORT_REQUIRES_PIO_RESET BIT(8) /* Do PIO queue SW resets after DMA abort */
> +#define HCI_QUIRK_DMA_REQUIRES_HC_ABORT BIT(9) /* Use HC_CONTROL ABORT to abort DMA */
>
> /* global functions */
> void mipi_i3c_hci_resume(struct i3c_hci *hci);
> +void mipi_i3c_hci_abort(struct i3c_hci *hci);
> void mipi_i3c_hci_pio_reset(struct i3c_hci *hci);
> void mipi_i3c_hci_pio_reset_all_queues(struct i3c_hci *hci);
> void mipi_i3c_hci_dct_index_reset(struct i3c_hci *hci);
> --
> 2.51.0
>
next prev parent reply other threads:[~2026-05-12 17:01 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-04 11:33 [PATCH V3 00/16] i3c: mipi-i3c-hci: DMA abort, recovery and related improvements Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 01/16] i3c: mipi-i3c-hci: Fix suspend behavior when bus disable falls back to software reset Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 02/16] i3c: mipi-i3c-hci: Preserve RUN bit when aborting DMA ring Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 03/16] i3c: mipi-i3c-hci: Prevent DMA enqueue while ring is aborting or in error Adrian Hunter
2026-05-12 16:44 ` Frank Li
2026-05-04 11:33 ` [PATCH V3 04/16] i3c: mipi-i3c-hci: Wait for DMA ring restart to complete Adrian Hunter
2026-05-12 16:45 ` Frank Li
2026-05-04 11:33 ` [PATCH V3 05/16] i3c: mipi-i3c-hci: Move hci_dma_xfer_done() definition Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 06/16] i3c: mipi-i3c-hci: Call hci_dma_xfer_done() from dequeue path Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 07/16] i3c: mipi-i3c-hci: Complete transfer lists immediately on error Adrian Hunter
2026-05-12 16:46 ` Frank Li
2026-05-04 11:33 ` [PATCH V3 08/16] i3c: mipi-i3c-hci: Avoid restarting DMA ring after aborting wrong transfer Adrian Hunter
2026-05-12 16:50 ` Frank Li
2026-05-15 5:30 ` Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 09/16] i3c: mipi-i3c-hci: Add DMA ring abort/reset quirk for Intel controllers Adrian Hunter
2026-05-12 16:53 ` Frank Li
2026-05-04 11:33 ` [PATCH V3 10/16] i3c: mipi-i3c-hci: Add DMA ring abort " Adrian Hunter
2026-05-12 17:01 ` Frank Li [this message]
2026-05-04 11:33 ` [PATCH V3 11/16] i3c: mipi-i3c-hci: Factor out reset-and-restore helper Adrian Hunter
2026-05-12 17:03 ` Frank Li
2026-05-04 11:33 ` [PATCH V3 12/16] i3c: mipi-i3c-hci: Add DMA-mode recovery for internal controller errors Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 13/16] i3c: mipi-i3c-hci: Wait for NoOp commands to complete Adrian Hunter
2026-05-12 18:05 ` Frank Li
2026-05-04 11:33 ` [PATCH V3 14/16] i3c: mipi-i3c-hci: Base timeouts on actual transfer start time Adrian Hunter
2026-05-12 18:11 ` Frank Li
2026-05-04 11:33 ` [PATCH V3 15/16] i3c: mipi-i3c-hci: Consolidate DMA ring allocation Adrian Hunter
2026-05-12 18:15 ` Frank Li
2026-05-04 11:33 ` [PATCH V3 16/16] i3c: mipi-i3c-hci: Increase DMA transfer ring size to maximum Adrian Hunter
2026-05-12 18:15 ` Frank Li
2026-05-12 12:35 ` [PATCH V3 00/16] i3c: mipi-i3c-hci: DMA abort, recovery and related improvements Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=agNc7oxOJORb0qwW@lizhi-Precision-Tower-5810 \
--to=frank.li@nxp.com \
--cc=adrian.hunter@intel.com \
--cc=alexandre.belloni@bootlin.com \
--cc=linux-i3c@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®