* HT1000 SATA broken by "x86, irq, ACPI: Use common irqdomain map interface to program IOAPIC pins"
@ 2014-08-27 21:13 Mikulas Patocka
2014-08-27 21:24 ` Thomas Gleixner
0 siblings, 1 reply; 3+ messages in thread
From: Mikulas Patocka @ 2014-08-27 21:13 UTC (permalink / raw)
To: Jiang Liu, Thomas Gleixner
Cc: Konrad Rzeszutek Wilk, Tony Luck, Joerg Roedel, Paul Gortmaker,
Greg Kroah-Hartman, Benjamin Herrenschmidt, Grant Likely,
Rafael J. Wysocki, Bjorn Helgaas, Randy Dunlap, Yinghai Lu,
Len Brown, Pavel Machek, linux-kernel
Hi
The patch d7b830013f59cf586c1cec3caa1ce7156da59a13, committed to 3.17-rc1,
breaks the SATA controller (sata_svw driver) on HT1000 ServerWorks
chipset. The other drivers work correctly.
With the patch d7b830013f59cf586c1cec3caa1ce7156da59a13, the SATA
controller times out after every command with lost interrupt.
With the patch 16ee7b3dcc56be14b9a813612cff2cc2339cdced, the SATA driver
can't be loaded at all, it fails with:
sata_svw 0000:01:0e.0: version 2.3
Failed to set pin attr for GSI11
sata_svw 0000:01:0e.0: PCI INT A: failed to register GSI
sata_svw: probe of 0000:01:0e.0 failed with error -1
/proc/interrupts:
# cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3 CPU4 CPU5
CPU6 CPU7 CPU8 CPU9 CPU10 CPU11
0: 26 0 0 0 0 0
0 0 0 0 0 0 IO-APIC-edge
timer
1: 12 0 0 0 0 0
0 0 0 0 0 0 IO-APIC-edge
i8042
4: 14 0 0 0 0 0
0 0 0 0 0 0 IO-APIC-edge
serial
6: 3 0 0 0 0 0
0 0 0 0 0 0 IO-APIC-edge
floppy
8: 0 0 0 0 0 0
0 0 0 0 0 0 IO-APIC-edge
rtc0
9: 0 0 0 0 0 0
0 0 0 0 0 0 IO-APIC-fasteoi
acpi
11: 350 0 0 0 0 0
0 0 0 0 0 0 IO-APIC-fasteoi
sata_svw
14: 0 0 0 0 0 0
0 0 0 0 0 0 IO-APIC-edge
pata_serverworks
15: 0 0 0 0 0 0
0 0 0 0 0 0 IO-APIC-edge
pata_serverworks
16: 0 0 0 0 0 0
0 0 0 0 0 0 IO-APIC-fasteoi
ohci_hcd:usb2, ohci_hcd:usb3, ohci_hcd:usb4
17: 0 0 0 0 0 0
0 0 0 0 0 0 IO-APIC-fasteoi
ehci_hcd:usb1
20: 2041 0 0 0 0 0
0 0 0 0 0 0 IO-APIC-fasteoi
eth3
28: 6375 0 0 0 0 0
0 0 0 0 0 0 IO-APIC-fasteoi
ioc0
NMI: 0 0 0 0 0 0
0 0 0 0 0 0 Non-maskable
interrupts
LOC: 3651 2122 2022 1639 1125 1065
602 1642 3581 3789 903 792 Local timer
interrupts
SPU: 0 0 0 0 0 0
0 0 0 0 0 0 Spurious
interrupts
PMI: 0 0 0 0 0 0
0 0 0 0 0 0 Performance
monitoring interrupts
IWI: 254 197 252 69 41 32
16 344 324 76 34 19 IRQ work
interrupts
RTR: 0 0 0 0 0 0
0 0 0 0 0 0 APIC ICR read
retries
RES: 2609 4492 2614 1944 1328 1048
2050 3602 2280 1557 973 928 Rescheduling
interrupts
CAL: 77 118 113 115 109 113
368 727 772 706 218 252 Function call
interrupts
TLB: 39 682 186 83 66 32
19 1232 212 112 97 43 TLB shootdowns
THR: 0 0 0 0 0 0
0 0 0 0 0 0 Threshold APIC
interrupts
MCE: 0 0 0 0 0 0
0 0 0 0 0 0 Machine check
exceptions
MCP: 2 2 2 2 2 2
2 2 2 2 2 2 Machine check
polls
ERR: 0
MIS: 0
lspci:
01:0e.0 RAID bus controller: Broadcom BCM5785 [HT1000] SATA (Native SATA
Mode) (prog-if 05)
Subsystem: Broadcom BCM5785 [HT1000] SATA (Native SATA Mode)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 9c00 [size=8]
Region 1: I/O ports at 9880 [size=4]
Region 2: I/O ports at 9800 [size=8]
Region 3: I/O ports at 9480 [size=4]
Region 4: I/O ports at 9400 [size=16]
Region 5: Memory at fa3fe000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at fa3c0000 [disabled] [size=128K]
Capabilities: [60] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=8
Status: Dev=01:0e.0 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=512 DMOST=8 DMCRS=32 RSCEM- 266MHz- 533MHz-
Capabilities: [90] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: sata_svw
Mikulas
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: HT1000 SATA broken by "x86, irq, ACPI: Use common irqdomain map interface to program IOAPIC pins"
2014-08-27 21:13 HT1000 SATA broken by "x86, irq, ACPI: Use common irqdomain map interface to program IOAPIC pins" Mikulas Patocka
@ 2014-08-27 21:24 ` Thomas Gleixner
2014-08-27 22:19 ` Mikulas Patocka
0 siblings, 1 reply; 3+ messages in thread
From: Thomas Gleixner @ 2014-08-27 21:24 UTC (permalink / raw)
To: Mikulas Patocka
Cc: Jiang Liu, Konrad Rzeszutek Wilk, Tony Luck, Joerg Roedel,
Paul Gortmaker, Greg Kroah-Hartman, Benjamin Herrenschmidt,
Grant Likely, Rafael J. Wysocki, Bjorn Helgaas, Randy Dunlap,
Yinghai Lu, Len Brown, Pavel Machek, linux-kernel
On Wed, 27 Aug 2014, Mikulas Patocka wrote:
> Hi
>
> The patch d7b830013f59cf586c1cec3caa1ce7156da59a13, committed to 3.17-rc1,
> breaks the SATA controller (sata_svw driver) on HT1000 ServerWorks
> chipset. The other drivers work correctly.
>
> With the patch d7b830013f59cf586c1cec3caa1ce7156da59a13, the SATA
> controller times out after every command with lost interrupt.
>
> With the patch 16ee7b3dcc56be14b9a813612cff2cc2339cdced, the SATA driver
> can't be loaded at all, it fails with:
> sata_svw 0000:01:0e.0: version 2.3
> Failed to set pin attr for GSI11
> sata_svw 0000:01:0e.0: PCI INT A: failed to register GSI
> sata_svw: probe of 0000:01:0e.0 failed with error -1
Can you please pull
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/urgent
into your tree and check whether this solves the issues?
Thanks,
tglx
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: HT1000 SATA broken by "x86, irq, ACPI: Use common irqdomain map interface to program IOAPIC pins"
2014-08-27 21:24 ` Thomas Gleixner
@ 2014-08-27 22:19 ` Mikulas Patocka
0 siblings, 0 replies; 3+ messages in thread
From: Mikulas Patocka @ 2014-08-27 22:19 UTC (permalink / raw)
To: Thomas Gleixner
Cc: Jiang Liu, Konrad Rzeszutek Wilk, Tony Luck, Joerg Roedel,
Paul Gortmaker, Greg Kroah-Hartman, Benjamin Herrenschmidt,
Grant Likely, Rafael J. Wysocki, Bjorn Helgaas, Randy Dunlap,
Yinghai Lu, Len Brown, Pavel Machek, linux-kernel
On Wed, 27 Aug 2014, Thomas Gleixner wrote:
> On Wed, 27 Aug 2014, Mikulas Patocka wrote:
>
> > Hi
> >
> > The patch d7b830013f59cf586c1cec3caa1ce7156da59a13, committed to 3.17-rc1,
> > breaks the SATA controller (sata_svw driver) on HT1000 ServerWorks
> > chipset. The other drivers work correctly.
> >
> > With the patch d7b830013f59cf586c1cec3caa1ce7156da59a13, the SATA
> > controller times out after every command with lost interrupt.
> >
> > With the patch 16ee7b3dcc56be14b9a813612cff2cc2339cdced, the SATA driver
> > can't be loaded at all, it fails with:
> > sata_svw 0000:01:0e.0: version 2.3
> > Failed to set pin attr for GSI11
> > sata_svw 0000:01:0e.0: PCI INT A: failed to register GSI
> > sata_svw: probe of 0000:01:0e.0 failed with error -1
>
> Can you please pull
>
> git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/urgent
>
> into your tree and check whether this solves the issues?
>
> Thanks,
>
> tglx
Yes, that fixes it.
Mikulas
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-08-27 22:20 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-08-27 21:13 HT1000 SATA broken by "x86, irq, ACPI: Use common irqdomain map interface to program IOAPIC pins" Mikulas Patocka
2014-08-27 21:24 ` Thomas Gleixner
2014-08-27 22:19 ` Mikulas Patocka
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®